Rock’s biggest “DJ” proves that, though his gear hasn't changed since the early ’90s, he still can rip out fresh ideas with ease and flair.
During the unrivaled axeman’s solo tour supporting his 2018 album The Atlas Underground, PG’s Chris Kies stood amazed as Tom Morello revealed the tricks that fortified a legacy of riffs in Rage Against the Machine and Audioslave. Plus, the Rock and Roll Hall of Fame nominating committee member (yes, he knows that Iron Maiden needs to be inducted) breaks down how he’s still aiming to shoot the instrument into the future.
The guitar that’s probably most associated with Tom Morello has to be his Frankensteined “Arm the Homeless” “super strat” that he’s had since 1986. Morello admits the story on the guitar’s evolution is murky, but the only thing from the original custom-order instrument is its body. He apparently spent upwards of two years trying every combination of pickups, necks, electronics, and trems to appease his tonal aspirations, but finally settled on honing his craft through practice rather than gear lust. The final conglomeration of parts have been in place for 30 years and includes a set of EMG pickups, a knock-off graphite Kramer neck scooped up from the bargain bin at Nadine’s, and an Ibanez Edge trem/bridge. And as they say, the rest is history. For this one, he uses Ernie Ball Hybrid Slinkys (.009–.046, for all vibrato-equipped guitars) and always grabs Dunlop Tortex Jazz III picks.
In a 2018 interview with PG, Tom Morello asserted that the single-coil was a big part of his heavy sound: “One of the things that I find, that’s attributed to the ‘heaviness’ of my riffs, is a lot of them are played on a single-coil pickup.” Enter another longtime mainstay of Tom Morello’s—a run-of-the-mill 1982 Fender Telecaster coined “Sendero Luminoso.” He wanted to start writing/performing songs in drop-D tuning, but all of his other guitars at the time had a locking nut, so he traded his roommate for the Tele and Morello had to part ways with a 50-watt Marshall. The Tele is completely stock (aside from the stickers) and to maintain similar string tension to the “Arm the Homeless” he goes with Ernie Ball Regular Slinkys (.010–.046).
When it’s time for Tom Morello to cover Woody Guthrie’s “This Land Is Your Land” or digging back into the Nightwatchman (his acoustic troubadour alter ego) catalog for “The Garden of Gethsemane,” he grabs this Ibanez GA60SCE-14-01.
All of Tom Morello’s gear was stolen in after a Valentine’s Day gig back in the ’80s and he had to scramble to replace everything before an upcoming session. He went to his neighborhood shop to buy anything they had, and what they did have was this Marshall JCM800 2205 50-watt head and a 1987 Peavey 4x12 cabinet with Celestion G12K-85 speakers. (On this short winter run, he opted to leave the Peavey at home in California and used a Marshall 1960B 4x12.)
Tom Morello quickly bonded with the 50-watt Marshall and once he found a sound he could work with, he etched in the settings and has left them the same ever since.
When PG asked Tom Morello if he ever tries to find inspiration in new effects, he mentioned trying to take back his sound: “In the mid ’90s, DigiTech basically tried to steal all of my sounds and put them in a pedal and called it the Space Station [laughs]. I got one of those and I started stealing some of their sounds back.” If you’re catching a theme here, Morello doesn’t change his gear much and his pedalboard is no exception (aside from the aforementioned plagiarizing Space Station)—it includes a MXR Phase 90, two Boss DD-3 Digital Delays (one longer for solos and one tighter for rhythms), original DigiTech WH-1 Whammy, Dunlop GCB95 Cry Baby wah, and the DigiTech Space Station XP300. Everything runs off the Voodoo Lab Pedal Power 2 Plus and relies on two Boss TU-3 Chromatic Tuners (acoustic/electric).
EBS BassIQ Blue Label Triple Envelope Filter Pedal
The EBS BassIQ produces sounds ranging from classic auto-wah effects to spaced-out "Funkadelic" and synth-bass sounds. It is for everyone looking for a fun, fat-sounding, and responsive envelope filter that reacts to how you play in a musical way.
The LR Baggs AEG-1 represents a highly versatile, forward-thinking approach to acoustic guitar luthierie. It sports a streamlined body shape with built-in electronics and pickup/microphone settings, providing a wide range of tones suitable for different playing environments and musical styles.
"The reason for AEG-1’s groundbreaking performance is its patent pending integrated neck support system that frees the guitar’s top and back from the need to support the neck. This allows Baggs unprecedented freedom to voice the top and back of each guitar to maximize the acoustic response, achieving a full-bodied sound from a slim and comfortable design. With greater structural integrity, more string energy is driven into the top, resulting in a wider dynamic range, greater tonal depth, enhanced low-frequency response, and improved tuning stability."
The AEG-1’s electronics feature an all-discrete studio grade preamp with a multi-pole crossover system that seamlessly blends the HiFi Pickups and Silo Mic for an inspiring feel and sound in any position – ranging between direct and natural to open and airy,and everywhere in between. As with all LR Baggs electronics, you can expect wonderful warmth, purity, low noise, and long battery life. The system’s three-knob side-mounted controls offer quick access to master volume, pickup/mic blend, tone shaping, phase inversion, and a battery life indicator.
Features
- Three different gloss-finished options for top wood: Torrefied Sitka Spruce, Natural Engelmann Spruce, or Sunburst Sitka Spruce
- Indian Rosewood back, with composite poplar frame body
- African Mahogany neck wood carved in a slim “C” shape
- Indian Rosewood fretboard with 16” radius, 25-5/8” (651mm) scale length and 20 frets
- Indian Rosewood bridge with composite saddle
- Nut width is 1.7” (43mm)made of composite material, with closed back tuners
- Onboard electronics/pickup system: Custom HiFi Duet with HiFi Pickups and Silo Microphone
- Full-sized body similar to a dreadnought-style guitar with scalloped X bracing, slim profile 2-1/2” body depth, and carved beveled armrest for extra comfort
- Utilizes single 9-volt with approximately 120-hour life
The Baggs AEG-1 Acoustic Electric Guitar is the culmination of a lifetime dedicated to high-performance acoustic amplification, all rooted in the craftsmanship of a luthier. Our founder and master luthier, Lloyd Baggs, began his journey as a guitar maker, creating instruments for artists like Ry Cooder, Jackson Browne, Graham Nash, and Janis Ian. His deep respect for the guitar evolved into a quest to faithfully amplify his own instruments for live performance.
After years of studying the physics of acoustic instruments and pioneering advancements in pickups and electronics, the Baggs AEG-1 is the realization of everything we’ve learned about acoustic sound and amplification. Lloyd’s dual expertise as a luthier and a pickup designer allowed us to craft a guitar and its electronics in harmony, finely tuning the system for this instrument.
Lloyd Baggs, founder of LR Baggs and Baggs Guitars, describes the journey that has led to his newest creation: “My desire to faithfully amplify the acoustic guitars I was building as a luthier led to the creation of our pickup company. It became my life’s work to eliminate every obstacle to playing live acoustic guitar easy, inspiring, and fun. The AEG-1 is the realization of this philosophy and I’m incredibly proud of this instrument. I hope it brings you inspiration and joy for years to come!”
Designed in California and manufactured in South Korea, the Baggs AEG-1 carries a street price of $1599.
For more information, please visit lrbaggs.com.
Trey Hensley | Baggs AEG-1 First Listen - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.LR Baggs AEG-1 Acoustic-electric Guitar - Torrefied Spruce Top
Loopers can be complex enough to make beginners cry. They are fun if you have time to venture for whole weeks down a rabbit hole. But a looper that bridges the functionality and ease-of-use gap between the simplest and most maniacal ones can be a sweet spot for newbies and seasoned performers both. The JamMan Solo HD lives squarely in that zone. It also offers super-high sound quality and storage options, and capacity that would fit the needs of most pros—all in a stomp just millimeters larger than a Boss pedal.
Fast Out of the Blocks
Assuming you’ve used some kind of rudimentary looper before, there’s pretty decent odds you’ll sort out the basic functionality of this one with a couple of exploratory clicks of the footswitch. That’s unless you’ve failed to turn down the rhythm-level knob, in which case you’ll be scrambling for the quick start guide to figure out why there is a drum machine blaring from your amp. The Solo HD comes loaded with rhythm tracks that are actually really fun to use and invaluable for practice. In the course of casually exploring these, I found them engaging and vibey enough to be lured into crafting expansive dub reggae jams, thrashing punk riffs, and lo-fi cumbias. Removing these tracks from a given loop is just a matter of turning the rhythm volume to zero. You can also create your own guide rhythms with various percussion sounds.
Backing tracks aside, creating loops on the Solo HD involves a common single-click-to-record, double-click-to-stop footswitch sequence. Recording an overdub takes another single click, and you hold the footswitch down to erase a loop. Storing a loop requires a simple press-and-hold of the store switch. The sizable latching footswitch, which looks and feels quite like those on Boss pedals, is forgiving and accurate. This has always been a strength of JamMan loopers, and though I’m not completely certain why, it means I screw up the timing of my loops a lot less.
Many players will be satisfied with how easy this functionality is and explore little more of the Solo HD’s capabilities. And why not? The storage capacity—up to 35 minutes of loops and 10 minutes for individual loops—is enough that you can craft a minor prog-rock suite from these humble beginnings. Depending on how economical your loops are, you can use all or most of the 200 available memory locations built into the Solo HD. But you can also add another 200 with an SD/SDHC card.Deeper into Dubs
Loopers have always been more than performance and practice tools for me. I have old multitrack demos that still live in the memory banks of my oldest loopers. And just as with any demos, the sounds you create with the Solo HD may be tough to top or duplicate, which can mean a loop becomes the foundation of a whole recorded song. The Solo HD’s tempo and reverse features, which can completely mutate a loop, make this situation even more likely. The tempo function raises or lowers the BPM without changing the pitch of the loop. As a practice tool, this is invaluable for learning a solo at a slower clip. But drastically altered tempos can also help create entirely new moods for a musical passage without altering a favorite key to sing or play in. Some of these alterations reveal riffs and hooks within riffs and hooks, from which I would happily build a whole finished work. The reverse function is similarly inspiring and a source of unusual textures that can be the foundation for a more complex piece.
HD, of course, stands for high definition. And the Solo HD’s capacity for accurate, dense, and detail-rich stacks of loops means you can build complex musical weaves highlighting the interaction between overtones or timbre differences among other effects in your chain. I can’t remember the last time I felt like a looper’s audio resolution was really lacking. But the improved quality here lends itself to using the Solo HD as a song-arranging tool—and, again, as a recording asset, if you want a looped idea to form the backbone of a recording.
The Verdict
With a looper, smooth workflow is everything. And though it takes practice and some concentration in the early going to extract the most from the Solo HD’s substantial feature set, it is, ultimately, a very intuitive instrument that will not just smooth the use of loops in performance, but extend and enhance its ability as a right-brain-oriented driver of composition and creation.
The Warm Bender dishes these sounds with ease and savage aplomb. Outwardly, it honors the original MkII—a good way to go given that the original Sola Sound unit is one the most stylish effects ever built. But the 3-transistor NOS 75 MkII is only one of the Warm Bender’s personalities. You can also switch to a 2-transistor NOS 76 circuit, aka the Tone Bender MkI. There’s also a silicon 3-transistor Tone Bender circuit, a twist explored by several modern boutique builders. Each of these three voices can be altered further by the crown-mounted sag switch, which starves the circuit of voltage, reducing power from 9 to 6 volts. From these three circuits, the Warm Bender conjures voices that are smooth, responsive, ragged, mean, mangled, clear, and positively fried.
The Compact Wedge Edge
Warm Audio, quite wisely, did not put the Warm Bender in an authentically, full-size Tone Bender enclosure, which would gobble a lot of floor space. But this smaller, approximately 2/3-scale version, complete with a Hammerite finish, looks nearly as hip. It’s sturdy, too. The footswitch and jacks are affixed directly to the substantial enclosure entirely apart from the independently mounted through-hole circuit board, which, for containing three circuits rather than one, is larger and more densely populated than the matchbox-sized circuit boards in a ’60s Tone Bender. Despite the more cramped quarters, there’s still room for a 9V battery if you choose to run it that way. Topside, there’s not much to the Warm Bender. There’s a chicken-head knob for output volume, another for gain, and a third that switches between the NOS 76, NOS 75, and silicon modes. Even the most boneheaded punk could figure this thing out.
A Fuzz Epic in Three Parts
Most Warm Bender customers will find their way to the pedal via MkII lust. If you arrive here by that route you won’t be disappointed. The Warm Bender’s NOS 75 setting delivers all the glam-y, proto-metal, heavy filth you could ask for. It sounded every bit as satisfying as my own favorite MkII clone save for a hint of extra compression that falls well within the bounds of normal vintage fuzz variation. My guess is that when you’re ripping through “Dazed and Confused” you won’t give a hoot.
“There’s more color and air in the NOS 76 mode.”
If the NOS 75 circuit suffers by comparison to anything, it’s the 2-transistor friend next door, the NOS 76. The lower-gain NOS 76 mode is, to my ears, the most appealing of the three. It’s the most dynamic in terms of touch response and guitar volume attenuation and delivers the clearest clean tones when you use either technique. There’s more color and air in the NOS 76 mode, too. Paired with a neck-position single-coil, it’s an excellent alternative for Hendrix and Eddie Hazel low-gain mellow fuzz that’s more like dirty overdrive. The silicon mode, meanwhile, lives on the modern borderlands of the ’60s-fuzz spectrum. It’s super-aggressive and focused, which can be really useful depending on the setting, but lo-fi, spitty, and weird when starved of voltage via the sag switch. It’s deviant-sounding stuff, but extends the Warm Bender’s performance envelope in useful ways, particularly if you hunt for unique fuzz tones in the studio.
There’s a widely accepted bit of wisdom that says most germanium fuzzes sound lousy unless you turn up everything all the way and use your guitar controls to tailor the tone. This is partly true, especially with a Fuzz Face. But in general, I respectfully disagree and present the Warm Bender as exhibit A in this defense. The gain and volume controls both have considerable range and fascinating shades of fuzz within that can still rise above the din of a raging band.
The Verdict
Some potential customers might balk at the notion of a $199 vintage-style fuzz made in China—no matter how cool it looks. But the Warm Bender looks and feels well made. The sound and tactile sensations in the three circuits are truly different enough to be three individual effects, and $199 for three fuzz pedals is a sweet deal—particularly when consolidated in a stompbox that looks this cool. There is a lot of variation in old Tone Benders, and how these takes on the circuits compare to your idea of true vintage Tone Bender sound will be subjective. But I heard the essence of both the MkI and MkII here very clearly and would have no qualms about using the Warm Bender in a session that called for an extra-authentic mid-’60s fuzz texture.
