
Porter has a variety of off-the-shelf and custom instruments, but he's mostly seen onstage with a Fender P bass. He also has one of the first 100 Telecaster basses produced in Fullerton, California. This photo was taken at a Runnin' Pardners show at the original Brooklyn Bowl in 2016.
Six decades ago, George Porter Jr. invented Crescent City groove music with the Meters. On his new album, Crying for Hope, he's still carrying the grease.
Every morning at 6:45, bass luminary George Porter Jr.'s late wife's dog, Ms. Vicki, tugs at him to feed her and take her out. That's early as hell for most musicians, but perfectly fine for Porter, because when Ms. Vicki is busy doing number two, Porter is busy getting into his creative zone. In 2020, Porter used that small daily window of time to craft the bass lines for the songs on Crying for Hope, his latest release with his band the Runnin' Pardners.
"While I'm waiting for her to return, I'm tinkering with the bass. I have a pretty big folder of ideas," says Porter, who recorded his sketches straight to Voice Memos using his phone's built-in mic, rather than any sort of interface. "I have that new iPhone 12, so the recording is pretty decent. We actually used the bass lines from the phone recording. Michael [Lemmler, keyboards and vocals in Runnin' Pardners] cleaned it up."
Crying For Hope
TIDBIT: Many of the tracks on Crying for Hope started as sketches Porter recorded with his iPhone, which were then cleaned up and used in the final recordings.
Crying for Hope features a mix of songs that were written in Porter's recent morning meditations and others that were written in 2017. During that earlier period, the band recorded 27 songs with guitarist Brint Anderson, who was a member of Runnin' Pardners for 25 years. Shortly after the recording, Anderson parted ways with Runnin' Pardners and Porter shelved the sessions. Those tracks were seemingly lost in the ether and only resurfaced in May 2020 via a computer foible.
"I started getting messages a few months ago saying that my hard drive was full," recalls Porter. "The computer was new so I was saying, 'It can't be full, that's a 2TB drive. It's not supposed to be full.'" In the middle of doing some detective work, Porter peeked into some folders and happened upon a gold mine of tracks. "I said, 'Oh man, some of this stuff is good. Then I contacted Michael and said, 'Man, you know, I listened to these Runnin' Pardners tracks that we did with Brint, and I think we should bring them back to the table and add Chris Adkins [current Runnin' Pardners guitarist] to the tracks.'"
"I have that new iPhone 12, so the recording is pretty decent. We actually used the bass lines from the phone recording."
The numbers "Porter 13A," "I'm Barely," "Just Start Groovin'," "You Just Got Tired," and "Too Hot Too Cold" were recorded live during the original 2017 sessions. The tracks from the 2020 session were cut separately because of the COVID-19 lockdown, but still have a remarkably live feel. "We were using FaceTime for communication between the musicians, and the sessions were actually recorded up in the cloud using Pro Tools. We would load the tracks up into the cloud and then we were able to record in our individual studios. What pleased me the most about this record is that it doesn't sound like we're all in different studios. It sounds very live. Terrence Houston [drummer] got the tracks after we had totally completed all our parts."
No matter how the tracks were cut, they all have that deep Porter pocket. For decades Porter has been considered the quintessential groove bassist. Interestingly, his first instrument was a classical guitar his mother gave him on Christmas Day as both a Christmas present and an early birthday gift (he was born on December 26). Porter took lessons for two years, working on songs like "Home on the Range" or "Red River Valley." Then one day on the way to a lesson, he came across bassist Benjamin "Poppi" Francis on Robinson Street in his native New Orleans, playing the blues with his grandfather on guitar. That moment changed everything, as Porter got hit with the bug. At a guitar recital, Porter was slated to play a "cowboy" piece but pulled a switcheroo and instead played the bluesy "St. Louis Woman." Infuriated by this, his teacher gave him the boot. This turned out to be a blessing for Porter, as he devoted his time to picking things up from local musicians who would jam all night on the street, around the corner from his home.
George Porter Jr.'s Gear
Photo by Josh Hitchens
Basses & Guitars
- Fender P Bass (1970 body with a 1973 neck)
- Fender Telecaster bass (one of the first 100 made)
- D. Lakin bass refretted by New Orleans' Strange Guitarworks
- Lakland Bob Glaub U.S. Series Custom Shop 44-64 Classic Precision (modeled after the P bass)
- Lakland Bob Glaub Skyline 44-64
- Takamine electric/acoustic guitar
- Alvarez acoustic guitar
Strings
- D'Addario (.055–.065–.085–.105)
Amps & Cabinets
- Two Aguilar Tone Hammer 700 heads
- Aguilar DB 410 cabinet
- Aguilar DB 212 cabinet
Effects
- EBS OctaBass
- EBS UniChorus Studio Edition
- EBS BassIQ Blue Label
- TC Helicon VoiceLive Play
When he was 10, Porter connected with drummer Joseph "Zigaboo" Modeliste and the pair became a fixture on the New Orleans scene. After sitting in with bluesman Earl King, Porter was introduced to vocalist/keyboardist Art Neville by guitarist Herbert Wayne, who sent Porter out as a sub for him one night. Initially, Neville was unimpressed by Porter, calling him "the worst guitar player he ever heard." Neville had sought a lead guitarist and Porter was strictly a rhythm player. Later, Porter switched to bass and Neville caught him on a gig with Irma Thomas, the "Soul Queen of New Orleans." This time, Neville liked what he heard and pegged Porter to form a band. In 1965, with guitarist Leo Nocentelli added to the mix, the Meters were born.
The Meters were among the originators of funk, but offered their own unique New Orleans twist to the sound. They played four-hour gigs for six nights a week at the Ivanhoe Club on Bourbon Street and developed a telepathic musical bond. Later, the Meters became the house band for pianist/songwriter/producer Allen Toussaint and his label, Sansu Enterprises. That glory, however, came with a price in terms of creative freedom. Toussaint dictated the music with a heavy hand, and Porter's bass lines were relegated to mimicking Toussaint's left hand.
Porter suggests the Meters could have possibly been the first jam band, and he might very well be right.
Creative license to roam was the secret to the Meters' success. Porter suggests the Meters could've possibly been the first jam band, and he might very well be right. While the songs on the Meters' albums weren't much longer than three minutes, the band took that material and transformed them into simmering, transcendental marathon shows. It's no wonder their 1969 hit "Cissy Strut," a song that was finally inducted into the Grammy Hall of Fame in 2011, is considered by many to be the ultimate jam tune. The simple opening riff has served as a catalyst for countless epic and endless improv sessions. Now, there are even videos on YouTube where Porter finally puts his foot down and teaches everyone how to actually play the opening riff correctly.
Throughout the '70s, the Meters recorded eight albums and were held in high esteem by music royalty. Paul McCartney invited them to play at his Venus and Mars release party in 1975, on the Queen Mary, in Long Beach, California, and Mick Jagger was in attendance. This led to the Meters being asked to open for the Rolling Stones for both their 1975 American and 1976 European tours. However, this opening slot was not quite the dream gig you might expect. Hardcore Stones fans typically hate any opening act, and at a 1976 gig in Europe, the Meters had stuff thrown at them. During this incident, Jagger and Keith Richards had to come out and quiet the crowd. One positive highlight about the Rolling Stones saga for Porter was that, at one show, Eric Clapton urged the Stones to do an encore, which they usually didn't do. The Stones' bassist, Bill Wyman, had already left, so Porter got to sit in.
With their emergence in 1965, the Meters simultaneously began a course that would influence the history of New Orleans' music, soul, pop, and rock 'n' roll. The Meters on Saturday Night Live in New York City in 1977. Left to right: David Batiste Sr., George Porter Jr., Zigaboo Modeliste, and Leo Nocentelli.
Photo by Ebet Roberts
In 1977, the Meters disbanded after conflicts over ownership of the band's name (although the original members reunited for sporadic events from 2000 on). Years later, after a jam session at the New Orleans Jazz & Heritage Festival, the Funky Meters were formed, and that band saw Porter, Neville, drummer Russell Batiste Jr., and Brian Stoltz (who replaced Nocentelli) taking more of a funk-rock approach, with Hendrix tunes being part of the repertoire.
Porter also formed Joyride, a band that he played with through most of the 1980s, and Runnin' Pardners, in 1990. By this time, Porter had developed a massive reputation in the music world and was called to collaborate and record by the likes of Tori Amos, David Byrne, Albert King, Robert Palmer, and Patti LaBelle. Porter's iconic P bass can be heard on classic albums like Palmer's Sneakin' Sally Through the Alley (1974) and classic songs like LaBelle's "Lady Marmalade." In addition to his main bands, Porter is also a prominent figure in the jam-band scene and has played with John Scofield, Eric Krasno, and the Tedeschi Trucks Band. He and the Meters received the Grammys' Lifetime Achievement Award in 2018.
Although he started on guitar, George Porter Jr.'s shift to bass proved to be a historic decision, defining the bottom end of New Orleans groove music and shaping the character of funk bass.
Photo by Michael Weintrob, Instrumenthead.com
Even though Porter has reached immortal status in the bass world, he's still relentless in his pursuit of the musical truth. He religiously documents every performance he can. "I have a little Zoom H4n, and I record, like, 100 percent of the shows that I'm in control of. It has four inputs, so I take two channels from the desk and the two ambient mics that's on the front of the H4, and every night I record four tracks. I have three 2TB hard drives that are full, and I'm working on trying to categorize the different gigs to a 4TB drive. I'm trying to gather all the Funky Meters shows that I have, all of the Runnin' Pardners shows that I have, all of the Porter trio shows that I have, and all the jam bands that I played in, and I'm putting them in. I've got that drive divided into four pieces."
Porter's archive is a constant source of study for him. "When I get off the gig and something happened that night, more than likely the next morning that gig is on the computer behind me, and I'm finding what that thing was." And if something really magical occurred, Porter might not even wait until the sun rises. "Before my wife [Aralean] passed away, I actually used to come home from the gig and sit down in the driveway and listen to the last set in the car. I usually would get to the house about 2:30 a.m. and I would sit out there for 45 minutes and, you know, usually my wife might call up and say, 'Hey, the music's too loud!'"
George Porter & The Runnin' Pardners "Cryin' For Hope" 4.16.21 Suwannee Surprise
"Crying for Hope," the title track of George Porter Jr.'s latest release, explores themes of social justice. The song started from some noodling Porter recorded on an acoustic bass into his iPhone during the morning as his late wife's dog, Ms. Vicki, took care of her business. The tune started off as an instrumental, but after the George Floyd incident, Porter says he was compelled to "cry for hope." Here, the bassist and his krewe perform it at an outdoor venue near Live Oak, Florida.
- Forgotten Heroes: Pops Staples - Premier Guitar ›
- Lakland 44-AJ Bass Review - Premier Guitar ›
- Warren Haynes: Working-Class Hero - Premier Guitar ›
Featuring Bluetooth input, XLR inputs, and advanced amplifier platform, the KC12 is designed to offer exceptional sound quality and versatility for a wide range of applications.
The KC12 is a first-of-its-kind, 3-way, 3000-watt active loudspeaker system encompassing the visual aesthetic of a column loudspeaker while surpassing the acoustic performance of conventional designs. Simple and easy to deploy, the elegant KC12, available in black and white, is ideal for a wide range of customers and applications from solo entertainers, musicians and bands, mobile entertainers and DJs to corporate AV, event production, and static installations.
Column-style portable loudspeaker systems are most often put into service due to their unobtrusive form factor. However, typical designs lack clarity and definition, particularly when pushed to high output levels, forcing the user into a form-over-function compromise. Solving this common dilemma, the KC12 cleverly utilizes a 3-way design featuring QSC’s patented LEAF™ waveguide (first introduced in L Class Active Line Array Loudspeakers) combined with a true 1-inch compression driver, two 4-inch midrange drivers, and a high output 12-inch subwoofer, while still maintaining the desired, elegant appearance of a “column” system. The KC12 produces an outstanding full-range horizontal coverage of 145 degrees and 35 degrees of audience-directed vertical coverage with clean and natural sound at all output levels.
The system features three inputs: a Bluetooth ® input combined with a 3.5 mm TRS stereo input, as well as two combo XLR inputs (Mic/Line/Hi-Z and Mic/Line/+48 V), with independent, assignableFactory Presets for each XLR input, making it ideal for small events where two microphones are needed for different uses. The rear panel incorporates a multi-function digital display, offering control and selection of several loudspeaker functions, including Global Parametric EQ, Subwoofer level, Presets and Scenes, Bluetooth configuration, Delay (maximum of 200 ms), or Reverb. Bluetooth functionality also provides True Wireless Stereo (TWS), which ensures low latency pairing between the music source and both left and right loudspeakers simultaneously.
Additionally, the KC12 can be deployed with or without its lower column pole, making the system ideally suited for utilization on a floor, riser or raised stage. The system is backed by a 6-year Extended Warranty (with product registration).
“The KC12 exquisitely resolves the form-over-function compromise that has frustrated users of this category of products since they made their market introduction over 20 years ago,” states David Fuller, VP of Product Development, QSC Audio. “With the benefit of time, experience, extensive customer research, and cutting-edge innovation, our talented design team has truly created something very different from the status quo – not simply a differentiated product, but an overall better solution for the customer.”
The feature set and performance characteristics of the KC12 are complemented by a new, advanced amplifier platform, first incorporated into the L Class LS118 subwoofer released this past October. Fuller adds, “Among the platform’s key attributes are layers of real-time telemetry and protection to ensure uninterrupted performance day after day, which is a foundational QSC brand attribute.”
“Just like our first K Series reset the bar for powered loudspeakers, elevating customers’ expectations for performance, quality, reliability, usability, and professional appearance, the K Column offers a compelling, new approach to a familiar category and is destined to redefine the whole notion of what a ‘column’ is for users of portable PA products,” states Ray van Straten, VPBrand, Marketing & amp; Training, QSC Audio. “The product is simply stunning in its sleek and elegant appearance, but with the marketing tagline, ‘Just Listen’, we’re confident that once again, QSC sound quality will ultimately be the reason customers will quickly embrace the K Column as the next ‘New Standard’ in its category.”
The QSC KC12 K Column carries a MAP price of $1,999.
For more information, please visit qsc.com.
This pedal is designed to offer both unique distortion qualities and a tonal palette of sonic possibilities.
At the heart of the Harvezi Hazze pedal is a waveshaper designed around a unijunction transistor - a relic from the early days of the semiconductor industry unearthed from the e-waste bins of flea markets in Tbilisi, Georgia, the Eastern European country's largest city.
The unijunction transistor offers unique properties allowing one simple component to replace a number of very complex devices. Therefore. depending on the operating mode, users can access a distortion, a limiter, a waveshaper and a generator - with smooth transitions among each of these.
The name "Harvezi Hazze" translates from Georgian as "a fault on the transmission line" or "signal jamming", and both the semantic and phonetic nature of these translations imply what users can expect: an impediment to the input signal, which can range from pleasant harmonic distortions to complete obliteration. The signal chain of Harvezi Hazze consists of an optical compressor with fixed parameters; a dual-mode distorting amplifier with either softer or harsher clipping; a waveshaper built around a unijunction transistor; and a tone stack section designed to tame these sonic building blocks.
Signal flow and controls
Following the input, the signal goes to the Compressor, Distorting Amplifier, Waveshaper, and then to the Tone Stack and output stages. Harvezi Hazze features six control knobs, a three-way switch and a footswitch.
- Gain Control: This controls the output amplitude of the signal in the distorting amplifier section. Depending on the position of the switch, the distortion introduced by this section is soft (with the switch in the left position) or more aggressive with an abundance of high harmonics (with the switch in the middle position).
- Spoil and Spread: This knob controls the operation of the unijunction transistor (waveshaper section). Spoil sets the point on the amplitude axis at which the wave will fold, and Spread sets the amplitude of the folding. The higher the Spread value, the more severe the distortion will be, while Spoil will change the timbre and response threshold. By adjusting Spoil, users can achieve various gating and cutoff effects; at low Spread values, distortion sounds are mixed into the clean sound.
- Tone: This knob adjusts the brightness of the sound. With higher values, higher harmonics become present in the signal.
- Three-way switch. This feature regulates either the distortion mode in the amplifier section (left and center positions), or turns on the total feedback mode (right position) when the values of all knobs begin to influence each other. In this position, effects occur such as resonance at certain frequencies and self-oscillation.
- Level knob: This controls the output volume of the signal.
- Footswitch: This routes the signal through the effect circuitry or from input to output directly (true bypass).
The array of switches on the side of the unit provides even further tonal options; the lower position of the switch enables the specific function:
- Tone Stack: Routes the signal through the tone stack section (Tone knob).
- Bass Boost: Enhances bass frequencies.
- Tone Mode: Changes the behavior of the Tone knob (tilt or lowpass).
- Notch Freq: Changes the central frequency of the filter.
- High Cut: Attenuates high frequencies.
- Compressor: Routes the signal through the compressor.
Harvezi Hazze is priced at €290. To learn more, please visit https://somasynths.com/harvezi-hazze/.
Ibanez Blackout series acoustic guitars feature all-black aesthetic, high-quality electronics, and in-demand woods. Models include AEG721 with Fishman S-core pickups, AEWC621 with Ibanez AEQ-SP2 preamp, and TCY621 with Ibanez under-saddle pickup. With prices ranging from $249.99 to $399.99, these guitars offer a unique and stylish option for musicians.
Ibanez has unveiled its new Blackout series of acoustic guitars to their lineup. Inspired by the popular Iron Label series, these instruments feature an all-black aesthetic, including a matte black finish and black hardware. The Blackout series offers three distinct models: the AEG721 7-string acoustic-electric, the AEWC621, and the TCY621. Each model boasts in-demand woods, including a Spruce top, Sapele back and sides, and Macassar Ebony or Purpleheart for the fingerboard and bridge.
To complement their unique appearance, the Blackout guitars are equipped with high-quality electronics. The AEG721 and AEWC621 feature Fishman’s S-core pickups and Ibanez AEQ-SAP2 preamps, while the TCY621 utilizes an Ibanez under-saddle pickup and AEQ-2T preamp.
For more information, please visit ibanez.com.
AEG721
- AEG body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip 3pc Nyatoh/Maple neck
- Macassar Ebony fretboard & bridge
- Black dyed Bone nut & saddle
- Black Die-cast tuners (18:1 gear ratio)
- Fishman® S-core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez Advantage™ bridge pins
- D'Addario® XTAPB1253, plus .070 guage Phosphor Bronze
- String Gauge: .012/.016/.024/.032/.042/.053/.070
- Factory Tuning: 1E,2B,3G,4D,5A,6E,7B
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
AEWC621
- AEWC body
- 634mm/25" scale
- Spruce top
- Sapele back & sides
- Comfort Grip Nyatoh neck
- Macassar Ebony fretboard & bridge
- Black Die-cast tuners (18:1 gear ratio)
- Fishman® S-Core pickup
- Ibanez AEQ-SP2 preamp w/Onboard tuner
- Balanced XLR & 1/4" outputs
- Ibanez IACS6C coated strings
- Recommended case: AEG10C/MAP: $169.99
- Finish: Blacked Out
LIST PRICE: $599.99
ESTIMATED STREET PRICE: $399.99
TCY621
- Talman Double Cutaway body
- Neck joint at 16th fret
- Spruce top
- Sapele back & sides
- Okoume neck
- Purpleheart fretboard & bridge
- Black Die-cast tuners
- Ibanez Undersaddle pickup
- Ibanez AEQ-2T preamp w/Onboard tuner
- Ibanez Advantage™ bridge pins
- Recommended case: TM50C/MAP: $179.99
- Finish: Blacked Out
LIST PRICE: $374.99
ESTIMATED STREET PRICE: $249.99
Martin's 2025 NAMM Show lineup features new guitars with enhanced playability and vintage aesthetics.
C. F. Martin & Co. is unveiling an exciting lineup of new guitars ahead of The 2025 NAMM Show, including refinements to its trusted Standard Series and two all-new Retro Plus guitars.
With the Standard Series refresh, Martin brings fans enhanced playability, timeless aesthetics, and three stunning new models, while its two new Retro Plus guitars offer thermally aged spruce tops and the classic appearance of an 18-style guitar at an accessible price point. These releases showcase Martin's mission to create instruments that unleash the artist within.
These new guitars and more will be on display at The 2025 NAMM Show in Anaheim, California, through Saturday, January 25, with more releases to come.
Standard Series Refresh
Martin is refreshing its popular Standard Series lineup to bring subtle yet impactful refinements to enhance the look, tone, and playability of these iconic guitars, while introducing three new models to the series: the D-17, 000-17, and OM-45.
One of the key updates is Sitka spruce Golden Era (GE) top bracing, as featured on the Modern Deluxe Series, which offers a more vintage, breathy tone with enhanced sustain. The GE modified low oval neck profile maintains its popular shape but is optimized for vintage appeal with minimal increase in total mass.
It's paired with playability enhancements like a thinner fingerboard with a gently beveled comfort edge and refined string spacing at the nut, while the new GE modern belly bridge features smoother, more comfortable corners.
Standard Series guitars also now feature either bone or ebony bridge pins, along with newly added sunburst and ambertone finish options for select models. Additional aesthetic updates include a long diamond neck transition, a nut cut on angle, and a sleeker vintage-style heel.
These are the changes Martin enthusiasts have been asking for, delivering a blend of vintage appointments and modern playability enhancements. Players will notice improved comfort and vintage tones, particularly with the GE-inspired bracing and aesthetic refinements.
For more information, please visit martinguitar.com.
D-17
The Martin D-17 is a bold new offering in the refreshed Standard Series, combining vintage-inspired appointments with modern refinements for players seeking rich sounds and enhanced playability. Its iconic Dreadnought body shape is a favorite among players for its loud, projective tone and strong bass. This model is handcrafted with a satin-finished solid mahogany body, delivering a warm and woody tone, while vintage-inspired details such as a sleeker heel and nickel open gear tuners give the guitar a timeless, elegant look. With its satin-finished select hardwood neck and 25.4" scale length, whether you’re strumming big chords or picking intricate tunes, the D-17 delivers powerful, dynamic sound with a classic, vintage vibe.
000-17
The Martin 000-17 is another fresh addition to the Standard Series lineup. Its Auditorium (000) body shape offers a balanced tone and comfortable size, making it great for both fingerstyle playing and heavy-handed strumming. Crafted from solid mahogany with a satin finish, it delivers a warm, woody tone with a clear top end and a punchy midrange—ideal for players seeking a vintage-inspired sound with a modern edge. Its satin-finished select hardwood neck and 24.9" scale length contributes to a more relaxed string feel and warmer, mellower tones. Whether you’re playing at home, in the studio, or on stage, the 000-17 delivers the balanced, dynamic sound that players expect from a high-quality Martin.
OM-45
The Martin OM-45 is a pinnacle of craftsmanship in the refreshed Standard Series, combining classic appointments with modern enhancements for a truly exceptional instrument. This all-new full-gloss acoustic is crafted with solid East Indian rosewood back and sides and a solid spruce top, delivering a rich, resonant tone with remarkable sustain. Its genuine mahogany neck ensures a smooth, effortless feel, while the longer 25.4" scale length provides just the right amount of string tension for enhanced clarity, making this guitar great for intricate picking and strumming. Its dazzling pearl inlay, aging toner, and gold open gear tuners offer an elegant touch, making the OM-45 as stunning to look at as it is to play.
De Retro Plus Mahogany
The Martin DE Retro Plus Mahogany is inspired by Martin’s legendary 18-style flagship models. It combines powerful tone and iconic design with cutting-edge craftsmanship at a fraction of the price. Its torrefied solid spruce top is thermally aged for enhanced resonance and a beautifully seasoned sound, delivering the rich, broken-in tone of a vintage instrument from the first strum. It’s the same premium feature long reserved for our Authentic and Modern Deluxe series, now available for the first time ever in the Road Series. It even comes stage-ready with Martin E1 electronics, featuring a built-in tuner and controls for dialing in your perfect live tone.
000E Retro Plus Mahogany
This 000 model blends balanced tone with the same cutting-edge craftsmanship and 18-style appearance as its Dreadnought counterpart, including a torrefied solid spruce top. With solid mahogany back and sides, scalloped spruce X bracing, a Performing Artist neck, ebony fingerboard and bridge, and Martin E1 electronics, these guitars have everything you could want in an acoustic. Ideal as a gigging workhorse or your first step into premium acoustics, they deliver best-in-class quality at an unbeatable value for serious players, and a lifetime of inspiration for anyone who picks one up. Just be warned, you won’t be able to put them down—because nothing compares to a Martin.