
Slash and Myles Kennedy have been teaming up since 2010, when Kennedy was chosen to front Slash’s touring band. Since then, they’ve made four studio albums together.
Despite almost the entire band getting Covid while recording in Nashville, Slash featuring Myles Kennedy and the Conspirators refused to be stopped. The result, 4, is their best album to date.
When you think of Slash (born Saul Hudson), several things immediately come to mind. There’s his signature top hat, his flowing curly locks, his killer solos and bluesy riffs, and, of course, the Les Paul—the iconic axe that’s been by his side since the mid ’80s when he broke ground on Guns N’ Roses’ Appetite for Destruction with timeless classics like “Sweet Child o’ Mine” and “Welcome to the Jungle.” There’s some controversy surrounding the actual guitar used on that album, with speculation that it wasn’t actually a Gibson but rather a replica made by luthier Kris Derrig. No matter the origin of that guitar, Slash popularized the Les Paul at the time when pointy-headed super strats ruled the world.
In fact, he single-handedly brought the Les Paul back into vogue, and rare models began fetching unheard of sums. With supergroup Velvet Revolver and his solo project, Slash featuring Myles Kennedy and the Conspirators, the Les Paul has remained Slash’s inseparable partner-in-crime. Gibson named Slash their global brand ambassador and has collaborated with him on 17 signature Les Pauls since 1997. So, it’s not surprising that when Gibson Records launched, Slash was the first artist they contacted.
The new album from Slash featuring Myles Kennedy and the Conspirators, 4, is Gibson Records’ inaugural release. It features Todd Kerns on bass, Brent Fitz on drums, Frank Sidoris on rhythm guitar, and Kennedy on vocals. Kennedy is also known as the lead singer for Alter Bridge. It’s less common knowledge that Kennedy is a monster guitarist with a degree in jazz studies and commercial music. In his formative years, Kennedy led Cosmic Dust, a fusion band that was the vehicle for his Frank Gambale meets Mike Stern pyrotechnics. Kennedy doesn’t play guitar on 4, but when they’re on tour, to avoid straining his voice, Kennedy locks himself in the hotel room and sheds endlessly.
Slash ft. Myles Kennedy and The Conspirators - The River Is Rising (Official Music Video)
Spirit Animals
The songwriting process for 4 began during the Living the Dream tour in 2019 in the dead time before and after shows. “It’s not a rule but I always write stuff for the next record while we’re on the road with the previous,” says Slash. “A lot of this new record was initiated in that process. In dressing rooms before the show, on the bus sometimes—though usually not on the bus because everybody is all over the place—and definitely in the hotel rooms. Because I never really go anywhere. I just stay in my room. I record stuff onto my phone—the cat’s out of the bag [laughs]. When I bring something to soundcheck and the band starts to jam on an idea, I record from the board.”
Slash is a self-taught zookeeper and has housed and cared for countless wild animals, so it makes sense that animals served as inspirations for some of the songs on 4. He got his first pet rat, a black-and-white creature named Mickey, from disco/funk legend Sly Stone. One of Slash’s anacondas, Sam, resides at the Nashville Zoo, and whenever Slash is in town, he’ll go visit him. Once, Slash snuck his mountain lion, Curtis, into the opulent Four Seasons hotel after the Northridge earthquake displaced him.
Given that history, it’s fitting that the album closer, “Fall Back to Earth,” began while Slash was on safari in South Africa at Kruger National Park, inspired by the sounds of monkeys and hippos he heard in the nighttime as he looked up at the stars in the majestic sky. “I took my guitar to the park, yes [laughs],” says Slash. “I just came up with this melody, which was the main theme of ‘Fall Back to Earth,’ and I stuck with that. I loved it because it came from a place of inspiration because of the environment that I was in.”
“For me, as a sort of semi-insecure guitar player, there are things that I did want to go back and fix, but Dave was like, ‘Come on, man.’ I was like, ‘I know, I know.’” —Slash
Kennedy, a self-proclaimed softie, also took inspiration from an animal. He wrote “Fill My World” from the imagined viewpoint of his Shih Tzu, Mozart. “It was a few years ago and I was on tour. My wife had come out to see me, and we were both trying to get home. We have a little dog named Mozart and he usually stays with friends or a dog sitter. They dropped him off thinking we’d be back in an hour or two. Unfortunately, a storm rolled in, so we basically got stuck. As the storm hit, we were freaking out because we were watching on the cameras. He was at the house by himself and the thunder and the lightning—which the dogs just hate—were just scaring the hell out of him. You could see it. It was kind of heartbreaking so I thought it would be interesting to write a song from his perspective. What might have been going through his head at that point.” At one point in the song, an audible crack in Kennedy’s voice can be heard.
Enter Dave Cobb
After the songs were written, it was time to make studio arrangements. “I talked to a couple of trusted executives in the industry that I know, and I said, ‘I’m looking for a good rock ’n’ roll producer,’” recalls Slash. “And, of course, the list was very short. I had four guys to look at. Two of them were interesting, two of them were, no.”
Grammy-winning producer Dave Cobb easily got the gig. “We just talked about records we loved,” recalls Cobb. “We talked about how records used to be made where you came into the room and recorded to tape with no separation and played as if you were a band playing live instead of making it a big procedure. And that’s how we hit it off. I remember growing up and learning how to play guitar, and Slash was huge to me. I was a little nervous to talk to him.”
TIDBIT: Slash and his band, Myles Kennedy and the Conspirators, recorded 4 at Nashville’s iconic RCA Studio A. Dave Cobb produced the album, which is also the inaugural release for Gibson Records.
“He wanted to record a rock band live in the studio and I wanted to be a rock band that recorded live in the studio, so we hit it off right away,” says Slash. The band set up at Nashville’s RCA Studio A, a legendary space that Chet Atkins’ built where every country music luminary from Dolly Parton to Waylon Jennings has recorded. “The vibe in that place is so inspiring, I have to say … everybody’s recorded there,” says Slash. “Steve Cropper’s got an office upstairs. I never got to meet him but just the fact that he was in the building was just so cool.”
Guitars, bass, and drums were recorded live in one room, and Kennedy did his vocals live in an adjacent booth. Everyone was at ease, just rockin’ out, which made for a particularly stellar vocal performance from Kennedy. “I thought I was just laying down vocals for scratch tracks. I thought I was just helping guide the band, so they know, ‘Okay we’re on the verse, or we’re on the chorus.’ Then I assumed that in a week or so we’d go in, and I’d re-cut the vocal,” says Kennedy. “But Dave was happy with them. That’s the way they get a singer to relax—tell him it’s just a scratch track (laughs).”
Cobb’s ability to embrace the moment also relaxed Slash’s usual quest for perfection. “For me, as a sort of semi-insecure guitar player, there are things that I did want to go back and fix, but Dave was like, ‘Come on, man.’ I was like, ‘I know, I know,’” Slash says.
Slash’s Gear on '4'
One of the most expressive combos of all-time: Slash and his inseparable Les Paul. He wrote one of the songs from 4 while at a game park in Africa. “I took my guitar to the park, yes,” he says with a laugh.
Photo by Annie Atlasman
Guitars
- Gibson ’59 reissue Les Paul (2)
- Gibson ’68 reissue Les Paul Custom
- Gibson ’69 reissue Flying V
- Kris Derrig Les Paul replica (1986)
- Most of Slash’s guitars are outfitted with his signature Seymour Duncan APH-2 Alnico II Pro Slash humbuckers
Strings & Picks
- Ernie Ball Slash Signature (.011–.048)
- Dunlop custom picks 1.14 mm
Amps
- Marshall Silver Jubilee 2555 JCM Slash Signature 100-watt head
- 1960 Marshall 4x12 cabinet loaded with Celestion Vintage 30s
Effects
- MXR EVH Phase 90
- MXR CAE Boost/Overdrive
- Dunlop Heil Talk Box
- Hammond Leslie
- Hughes & Kettner Tube Rotosphere
Dangerous Times
When Slash was in Guns N’ Roses, they were called “The Most Dangerous Band in the World” because of their hedonistic excesses. Now, older and wiser, Slash isn’t quite as carefree. For the recording session, to avoid public exposure and reduce the chance of getting Covid, the band hired a tour bus to bring them from Vegas to Nashville.
The bus first picked up Slash in L.A. and brought him to Vegas, where most of the other band members live. Myles drove into Vegas from Washington. Upon arriving in Sin City, they met up at a clinic, and after all testing negative, got on the bus and headed to Nashville. After a night’s rest, they got straight to business the next morning. At a breakneck rate of two songs per day, 90 percent of the record was done in five days. And then on the sixth day, when Slash was gearing up for some guitar overdubs, he got an unexpected call from Kennedy.
“He called me on my cell phone, which was odd to begin with,” recalls Slash. “Then he said that he had tested positive. Because we had to do regular testing, I was like, ‘Oh fuck.’ I couldn’t understand how that could possibly have happened because we hadn’t gone anywhere. Consequently, Brent, Todd, and one of the engineers at the studio were positive as well.”
Slash is synonymous with vintage Les Paul guitars and has collaborated on 17 signature models since 1997. Here he’s playing a ’59 reissue at the Fillmore Detroit with Myles Kennedy in 2015.
Photo by Ken Settle
Kennedy was also baffled. “The first time we tested was like three days before we got there and the next time we tested was the morning we walked into the studio. Everybody was fine and I was fine,” Kennedy recalls. “Then about 24 hours later I started to notice some strange symptoms. I thought they were allergies initially and, especially since I just tested, I thought, ‘There’s no way it’s Covid.’ But unfortunately, as the symptoms continued to evolve, I realized it was something a little more serious.”
Everyone had to go into quarantine, but that didn’t mean the music making had to stop. “I started to do what little guitar overdubs I had—I had some harmonies, and some sitar parts,” says Slash. “Then two days later I tested positive. It was inevitable because we were all living in the same house and sharing a communal kitchen. The house was now effectively called ‘Covid Manor.’” Only Sidoris avoided getting Covid.
Luckily, the setup of their accommodations made it possible to quarantine and still be productive. “It was perfect,” says Kennedy. “I had a little separate house outside the house. I think it was like a pool house or something. I ended up recording Todd’s vocals because Todd ended up getting sick as well. He would come out during the day, and I would set up my DAW and we would do the backing vocals.”
“Spirit Love,” “Whatever Gets You By,” and “Fall Back to Earth” were all finished in the pool house, and then the files were sent to Cobb.
“Seeing him actually in the studio, it was a ‘Holy Shit’ level of guitar playing. I knew he was incredible, and I knew he was a legend, but he’s way better than that when you see him in person.” —Dave Cobb
Dumble Destiny
Cobb’s gear inventory is impressive, and during the sessions Slash crossed paths with a true bucket-list item. “It was the first time I consciously knew I was playing through a Dumble amp. I’ve been hearing that name forever, but I didn’t know what it was,” admits Slash. “[Cobb] introduced me to a Fender that Dumble had customized, and it sounds fuckin’ amazing. I didn’t actually record anything with it, but it just sounded really good.”
Cobb recalls, “You know, Slash sounds good through a lot of things. He sounded great through that Dumble. When he plugged into it, it sounded like Slash—rock ’n’ roll, over the top, classic. It sounded like a great rock ’n’ roll amp when he played through it.”
Sadly, Alexander Dumble passed away in January, a few weeks after this PG interview with Slash took place. It seems almost like fate that their worlds collided shortly before Dumble’s passing. Slash commissioned Dumble to build him an amp, which may be one of the last projects the famed builder completed. “I got in touch with Alex after the session and he actually did a Fender for me,” Slash says. “It sounds really great. He’s not easy to get in touch with or to get him to do something, it became very apparent. So it was an honor to have him do something for me. But I didn’t know the history before. There was some discrepancy over the cost of it for a second, but he and I got to be good friends as a result of that. I didn’t know how much it cost, I thought five meant five-hundred bucks [laughs].”
Photo by Annie Atlasman
While Slash enjoys his Dumble amp—the new discovery—he stuck to a tried-and-true formula for 4. His iconic Marshall Silver Jubilee 100-watt heads into a 4x12 straight cabinet with Celestion Vintage 30s was the rig of choice.
For guitars, Slash had his staples at the ready. “I used my Kris Derrig replica, which is like my go-to guitar for recording,” he says. “But I also used a ’69 reissue Flying V, which I got last Christmas, that sounds great on a couple songs. I used two ’59 reissues, one apiece on two different songs, a ’68 Custom reissue on one song, and that was basically the setup.”
As Cobb put it, it doesn’t really matter what the gear is: Slash is going to sound like Slash. “Slash’s tone—the way he plays through a Silver Jubilee—is the ideal tone for Slash, you know what I mean?
“I’ll tell you what’s really cool. I know from being a fan, how good he is as a guitar player, and as a writer, and all of that,” Cobb continues. “But seeing him actually in the studio, it was a ‘Holy Shit’ level of guitar playing. I knew he was incredible, and I knew he was a legend, but he’s way better than that when you see him in person. I mean the solos on the record are live and he’s going for it, and it came out so classic and timeless. And his playing has so much feel and heart and soul. I didn’t realize how much better he is than I even thought he was. That was probably the biggest revelation. When he plugs in, it’s like, “I know why he’s Slash.” I was in the room with the engineer and the assistant in the control room, and we were all like, ‘Holy shit. This is way bigger and better than we even thought it was going to be.’”
Slash ft.Myles Kennedy & The Conspirators - Anastasia | Live in Sydney
Slash is a master of coaxing an impressive array of sounds out of his beloved Les Pauls. In the intro to “Anastasia,” he gets an acoustic vibe by using a fingerstyle approach combined with the Les Paul’s rhythm pickup setting. Once the distortion kicks in, he launches into a post neo-classical, pedal-point riff, before launching into all-out carnage once Myles Kennedy’s vocals enter.
- Rig Rundown: Guns N' Roses - Premier Guitar ›
- Gibson Slash Appetite Les Paul Electric Guitar Review - Premier ... ›
- The Legend of Slash's Appetite for Destruction Les Paul - Premier ... ›
- Our Favorite Songs of Summer 2022 - Premier Guitar ›
- Slash's Sixth Solo Album Set for Global Release May 17 ›
- Slash's Blues Album: Orgy of the Damned ›
- Blues Ball Band Tour: Slash's 2024 Pedalboard Unveiled - Premier Guitar ›
This wonky Zim-Gar was one of many guitars sold by importer Gar-Zim Musical Instruments, operated by Larry Zimmerman and his wife.
The 1960s were strange days indeed for import guitars, like this cleaver-friendly Zim-Gar electric.
Recently I started sharing my work office with a true gem of a guy … one of the nicest fellas I’ve ever come across. If you’ve been following my column here, you might remember my other work mate Dylan, who is always telling me about new, fad-type things (like hot Honey guitars) and trying to convince me to use AI more. (What can I say, he’s a millennial.) But Steve, on the other hand, is about 10 years my senior and is a native New Yorker—Brooklyn actually, from the Canarsie neighborhood. Steve is a retired teacher and spent many years teaching in the Brownsville area of Brooklyn, and man, he has some amazing stories.
Mostly we talk about music and sports (he’s exiled here among us Philadelphia sports fans) and he’s just endlessly interesting to me. He has a huge appetite and can eat a whole pizza. When he talks, he sounds like one of the Ramones and he still has an apartment in Rockaway Beach. We both love Seinfeld and, like George Costanza, Steve knows where all the great bathrooms are across New York City. Since he’s been added to my circle (and is such a mensch), I decided I should work him into a column.
So here’s the connection: Back in the day there were many American importers, dealers, and wholesalers. A lot of them were based in New York, Chicago, and Los Angeles, but I only know of one guitar importer located in Brooklyn: Gar-Zim Musical Instruments. The company was run by Larry Zimmerman and his wife, and the couple had some success importing and selling Japanese guitars and drums. I used to see early Teisco imports with the Zim-Gar badge, which was the brand name of Gar-Zim. I’ve also seen Kawai guitars with the Zim-Gar label, but the Zimmerman’s seemed to sell cheaper and cheaper gear as the ’60s wore on, including the piece you see here.
“This build reminds me of the cutting boards I used to make in wood shop back in my high school days.”
The model name and factory origin of this guitar is a mystery to me, but this build reminds me of the cutting boards I used to make in wood shop back in my high school days. The guitar is just flat across the top and back, with absolutely no contouring or shaping. Its offset body is plywood with a thin veneer on the top and back. From a distance this guitar actually looks kind of nice, but up close you can see a rather crude and clunky instrument that offers little flexibility and playability. The non-adjustable bridge is off center, as is the tremolo. It was really hard to get this guitar playing well, but in the end it was worth it, because the pickups were the saving grace. Another example of gold-foils, these units sound strong and raw. The electronics consist of an on/off switch for each pickup and a volume and tone knob. The tuners are okay, and the headstock design is reminiscent of the Kay “dragon snout” shape of the mid to late ’60s, which is where I would place the birthdate of this one, probably circa 1966. Everything is just so goofy about this build—even the upper strap button is located on the back of the neck. It reminds me of that era when simple wood factories that were making furniture were tasked with building electric guitars, and they simply didn’t know what they were doing. So, you get oddities like this one.
Gar-Zim continued to sell guitars and other musical instruments through the 1970s and possibly into the ’80s. I once even saw a guitar with the label Lim-Gar, which is totally puzzling. I think there should’ve been a Stee-Gar designation for my new buddy Steve-o! Yes, good readers, with guitars and me, there are always just a few degrees of separation.
In line with the MOOER’s recent expansion on the MSC range, the company is excited to announce the new MSC50 Pro, an Alder-bodied electric guitar with gloss finish, available in the new Magic Crystal color.
Featuring a roasted maple neck with a satin finish, a rosewood fingerboard for playing comfort, 22 frets, and a standard C shape, the guitar has been designed with classic guitarists in mind. This is beautifully emphasized with its beautifully resonant tonewoods, all while still being balanced perfectly with style and comfort of use.
The MSC50 Pro features all of the industry-standard features you might expect from such an impressively affordable guitar, such as bolt-on construction, a bone nut, and a dual-action steel truss rod. However, other features make the electric guitar stand out among others at a similar price point, such as its MTN-3LC locking tuning pegs, beautiful Abalone dot inlay, and, of course, its previously mentioned tonewood selection.
In order to capture the MSC50 Pro's balanced tonal profile, MOOER's luthiers have built it with three perfectly balanced pickups: the MSC-II N single coil neck pickup, the similar MSC-II M single coil middle pickup, and, best of all, the MHB-II B bridge humbucker. When these carefully chosen pickups are combined with the guitar's MPW 2-point chrome bridge, guitarists can make the most out of its tonal versatility, all while maximizing tuning stability.
To ensure that the guitar is suitable for a wide range of genres, both softer and higher-gain examples, the MSC50 Pro has a convenient coil split switch built into it, giving users better resonance control. Of course, this is also combined with a classic tone dial, a standard 5-way tone switch, and a volume control dial.
Overall, the MSC50 Pro reminds users of MOOER guitars that the company has never forgotten about its roots in classic-style guitars. Yes, the company is continuing to develop innovative guitar technology in other areas, but this electric guitar also represents a grounded approach, keeping things classic, sleek, and tonally versatile–all at a reasonable price point.
Features:
- Alder Body with a Gloss Finish
- Available in the Magic Crystal color
- Standard C-shaped roasted maple neck with a Satin finish
- Bolt-on construction
- 22-fret rosewood fingerboard
- Abalon dot inlay
- MTN-3LC locking tuners
- Bone nut
- Dual-Action Steel Truss Rod
- 12" radius
- 09-46 strings
- 25.2" scale
- MSC-II N Single Coil neck pickup, an MSC-II M Single Poil middle pickup, and an MHB-II B Humbucker Bridge Pickup
- Chrome guitar strap pin
- Coil Split Switch
- 5-Way Tone Switch
- Volume and tone dials
- MPW 2-Point chrome bridge
The MSC50 Pro will be available from the official distributors and retailers worldwide on 13th May 2025 at an expected retail price of USD419/Euro399/GBP339.
MOOER Expands Its Popular MSC Guitar Line with the MSC30 Pro and MSC31 Pro
MOOER has never shied away from innovation when it comes to its guitars. However, with the recently announced release of the MSC30 Pro and MSC31, the company reminds us that, sometimes, true innovation lies in mastering and enhancing a proven classic. With this philosophy, MOOER introduces two new exciting additions to their beloved MSC series of electric guitars.
Both the MSC30 Pro and MSC31 Pro continue MOOER’s philosophy of creating affordable guitars, but without sacrificing quality or performance, thanks to the poplar bodies and flame maple tops. Some guitarists will be drawn to the bright tones of the MSC30 Pro’s maple fingerboard, whereas others will prefer the warmer resonance of the MSC31 Pro’s rosewood alternative.
Each guitar features sturdy bolt-on neck construction, dual-action steel truss rods, bone nuts, and MTN-1 chrome tuning pegs (with the BK upgrade being reserved for the MSC31 Pro), ensuring tuning stability and comfort at all times.At the heart of both models are MOOER’s versatile MSC pickups, comprising the MSC-1N single-coil neck pickup, the MSC-1M single-coil middle pickup, and the powerful MHB-1B dual-coil humbucker at the bridge. Further complemented by a versatile 5-way pickup selector and exclusive coil split switch, players can effortlessly switch between a wide palette of tones, such as pristine cleans ideal for jazz or blues, or high-gain tones for heavier genres.
Tremolo support is also provided through both the guitar's bridges, with the MSC30 Pro featuring an MTB-1 2 Point Tremolo bridge, and the MSC31 Pro boasting an exclusive black MTB-1 BK 2 Point Tremolo bridge. Both bridges guarantee guitarists the ability to use tremolo bars in their guitar performances, without compromising the integrity of tuning stability.
Both guitars come with a selection of vivid new colors, complementing the guitar’s hardware with undeniable visual appeal. The MSC30 Pro is available in the classic finishes of Sunset Red, Lake Blue, Lemon Green, and Rose Purple. Meanwhile, the MSC31 Pro boasts its own selection of glossy finishes: Grey Burst, Blue Burst, Green Burst, and Purple Burst.
Overall, the MSC30 Pro and MSC31 Pro solidify MOOER’s commitment to combining quality craftsmanship, affordability, and versatility, giving guitarists of all levels the chance to own instruments that genuinely inspire.
Features
MSC30 Pro:
- Classic S-style design
- Poplar body with flame maple top
- Maple fingerboard
- Maple neck with satin finish
- Bolt-on neck construction
- 22 nickel silver frets, Abalone dotted inlay
- Coil split switch and versatile 5-way pickup selector
- MSC-1N/M single-coil pickups and MHB-1B humbucker
- 25.5" scale
- MTN-1 Chrome tuning pegs
- Available in gloss-finished Sunset Red, Lake Blue, Lemon Green, and Rose Purple
- Volume and tone dial
- Chrome strap pin
MSC31 Pro:
- Classic S-style design
- Poplar body with flame maple top
- Rosewood fingerboard
- Maple neck with satin finish
- Bolt-on neck construction
- 22 nickel silver frets, White Shell dotted inlay
- Coil split switch and versatile 5-way pickup selector
- MSC-1N/M single-coil pickups and MHB-1B humbucker
- 25.5" scale
- MTN-1 BK tuning pegs
- Available in gloss-finished Grey Burst, Blue Burst, Green Burst, and Purple Burst
- Volume and tone dial
- Chrome strap pin
The MSC30 Pro and MSC31 Pro will both be available from the official distributors and retailers worldwide on 2nd April 2025.
MOOER Gives Bassists What They Want with the New MBJ410 and MBJ420 Electric Bass Guitar Models
For 15 years, MOOER has built a critically acclaimed name for itself thanks to its cutting-edge electric guitars, pedals, and accessories. While the company is no stranger to building electric bass guitars, this has not been its focus for some time, hence why so many bassists are excitedly anticipating the release of the MBJ410 and MBJ420 electric bass guitars.
Both the bass guitars sport glossy Poplar bodies, keeping the price point affordable but without limiting their tonal resonance and versatility, whereas the MBJ420 holds the additional bonus of being built with a Poplar Burl top. Complete with roasted maple C-shaped necks (also accented with a gloss finish) as well as Roasted Maple fingerboards and White Shell dot inlays, the necks are designed to offer as much comfort as possible–a high priority for bass guitarists.
A 34" fret scale further enhances practicality for bassists, as does the neck's 12" radius. Strings are available in .045, .065, .080, and .100 gauges, providing something for any type of bass style - whether slapping, plucking, or picking techniques are preferred.Thanks to the industry-standard components of a dual-action steel truss rod and bone nut, the tuning and resonant stability of both the MBJ410 and MBJ420 models are also of a high standard. However, this is accentuated further by the guitars' strong and reliable BTN-1 tuning pegs, essential for heavier-gauge bass strings.
The tonewoods and structural integrity of the MBJ-series electric bass guitars wouldn't be complete without the accompaniment of the guitar’s two single-coil JB-style pickups. Combined with the MOOER BSC-2 bridge, both bass guitars have been carefully designed to amplify bass resonances excellently, complemented even further by their simple but effective tone dials. Two volume controls are also built in, ensuring that bassists can customize their sonic output to have the perfect tonal blend.
In terms of standout features, the main difference between the two bass guitars is the MBJ420's added poplar burl top, but most notably, the color selections. For the MBJ410, the bass guitar is available in Gunmetal Gray, Metal Green, and Metal Blue, perfectly suiting the stages of higher-gain performances. In contrast, the aesthetics of the MBJ420 are more classic, purchasable in Red Burst, Blue Burst, and Tobacco Burst. Finally, both guitars are topped with a chrome strap pin, enabling stylish and energetic live performances.
Overall, bassists will no doubt be excited to see MOOER return to electric bass guitars with the MBJ410 and 420 models. Of course, electric guitars will remain the focus for the company, but the release of these two new products is a reminder of just how accommodating MOOER is for its wide audience of musicians.
Features
- Electric bass guitar built with gloss-finished Poplar body (MBJ420 also features a Poplar Burl Top)
- Roasted maple C-shaped neck with a gloss finish
- Roasted maple fingerboard
- White Shell dot inlay
- 12” neck radius
- MOOER BSC-2 bridge
- VBJ-1 and VBJ-2 Single Coil pickups
- MOOER BTN-1 tuning pegs
- Bolt-on construction
- Bone nut
- Dual-action steel truss rod
- Pre-installed strings available in .045, .065, .080, and .100 gauges
- 21 frets
- 34"fret scale
- Colors available in Gunmetal Gray, Metal Green, and Metal Blue (MBJ410), and Red Burst, Blue Burst, and Tobacco Burst (MBJ420)
- Chrome strap pin
- 2 x volume control dials
- 1 x Tone dial
The MBJ410 and MBJ420 will both be available from the official distributors and retailers worldwide on 29th April 2025 at an expected retail price of USD319/Euro299/GBP249(MBJ410), USD399/Euro379/GBP319(MBJ420).
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
Taylor Guitars | Legacy 714ce | Playthrough Demo
The Oceans Abyss expands on Electro-Harmonix’s highly acclaimed reverb technology to deliver a truly immersive effects workstation. The pedal is centered around dual reverb engines that are independently programmable with full-stereo algorithms including Hall, Spring, Shimmer and more. Place these reverbs into a customizable signal path with additional FX blocks like Delay, Chorus, Tremolo, or Bit Crusher for a completely unique soundscape building experience.
Electro-Harmonix has paved the way for powerful, accessible reverbs since the release of the original Holy Grail and now we’ve pushed the envelope deeper with the fully-equipped Oceans Abyss. Featuring a customizable signal path with up to 8 effects blocks, the Oceans Abyss can be configured as individual reverb, modulation, EQ, delay, bit crusher, saturation or volume effects, or as countless combinations for incredibly creative effect shaping. From a simple Spring reverb to a lush stereo field featuring stereo hall and shimmer reverbs, chorus, delay, overdrive, and tremolo, you can go from surf to shoegaze instantly, without breaking a sweat.
Deep parameter editing is accessible via the high-visibility OLED display with multiple graphical views and easy-to-read designs. Expression/CV control over nearly every parameter gives artful control of your effects and dynamics. Fully-stereo I/O plus an FX Loop allows for use with any instrument, recording set up, or live rig. 128 programmable presets via onboard footswitching or MIDI ensure perfect recall in all performance situations. MIDI IN/OUT ports with MIDI IN support of PC, CC, and Tempo Clock expand the already immense talents of the Oceans Abyss. Connect with UBS-C to Windows or Mac for effects editing, preset management, and more with the free EHXport™ app (coming soon).
- Two Stereo Reverbs available at once, each fully pannable in the stereo field
- 10 reverb types to choose from: Room, Hall, Spring, Plate, Reverse, Dynamic, Auto-Infinite, Shimmer, Polyphonic, Resonant
- Additional FX blocks: Delay (Digital, Analog and Tape emulations), Tremolo, Chorus, Flanger, Phaser, Graphic EQ, Saturation, Bit Crusher, External FX Loop, Volume
- Create custom signal path routing with up to 8 effects blocks. Two blocks may be re-verb, the rest may be any of the additional FX blocks.
- Infinite reverb sustain with the press of a footswitch
- Stereo Audio I/O
- Stereo FX Loop routing on TRS Jacks
- Dual action footswitches allow for momentary or latching use
- Easily enable or disable tails
- 128 fully customizable presets
- All controls can be saved to presets
- Dive deep into global and preset settings to set up Oceans Abyss for your specific needs
- Illuminated slide pots and buttons
- High-visibility OLED graphical display
- Multiple graphical views: Signal Path, Performance, Settings, Physical, Explorer
- Easy-to-navigate menu system
- Ergonomic NavCoder knob allows rotary and directional navigation through menus
- EXPRESSION / CV input to control nearly any parameter in any FX block
- Footswitch input allows for adding up to three external footswitches, each assigna-ble to a number of functions
- MIDI In and Out. MIDI IN supports PC, CC (over nearly every available parameter), and Tempo Clock
- USB-C port to connect to Windows or Mac and interface with EHXport™ app (coming soon)
- 96kHz / 24-bit sample rate conversion
- Supplied with 9.6VDC / 500mA power supply