
You’re not supposed to put it there!
Savvy studio guitarists are hip to an old but rarely used electric guitar recording technique: capturing the acoustic sound of the instrument while simultaneously recording through an amp. We'll begin with the “traditional" approach, and then take it to other places, including ones where the sun don't shine.
But first: Why fuss with two mics when a miked amp sounds awesome on its own?
When Bright Bite is Right
Acoustic miking expands the electric guitar's frequency range. Amps and speakers siphon off highs—everything above 5 kHz or so. Your guitar produces overtones an octave or two higher, though you seldom hear them.
Sometimes aggressive high-end sizzle is exactly what a guitar needs to cut through a mix.
Usually we don't want those highs. They're not present in most electric guitar sounds we know and love. Also, electric guitar's limited frequency range is generally a blessing at mix time, leaving the top end free for voice, cymbals, piano, or anything else with lots of high-end action.
But sometimes, aggressive high-end sizzle is exactly what a guitar needs to cut through a mix. It can add mass and impact, especially on recordings with sparse instrumentation (one guitar and drums, for example). Also, dual signals permit processing tricks that can yield unique, hypnotic, and generally bitchin' tones.
Outside Looking In
Most players who use this technique simply aim a mic at the guitar's body. (Audition locations by monitoring through headphones, playing as you shift the mic around.) Ex. 1 features a Trussart Steelcaster, whose metal body generates odd rattles and resonance (Photo 1).
Ex. 1
First you hear the mic alone (an Ear Trumpet Edna, a small-diaphragm condenser), and then the same signal mixed with an amp sound. I used amp simulators for the non-miked tones in all these examples—specifically, Amp Designer from Apple's Logic Pro. [Disclosure:I'm a Logic developer.] If you use analog amps, it's best to isolate them. Amp bleed through the acoustic mic can produce unpleasant phase cancellation.
The miked tone is thin and brittle—but dig how it adds edge when blended with the darker amp sound. (It's a weird tone, but weird is good.) I applied contrasting processing to the two tracks: The amp sound has heavy tremolo and a hint of plate reverb. The mic has no trem, but heavy vibrato. The two parts are slightly panned, and there's compression and EQ on the master bus where the two parts meet.
Photo 2 (left) and photo 3 (right)
Let's go deeper—literally! For the remaining examples, I used a tiny lavalier mic like broadcasters clip to their lapels. Mine is a nice Shure SM93 (Photo 2), but you can get cool results with ultra-cheap lav mics—a hi-fi effect, this ain't. For Ex. 2, I inserted the mic through the diamond soundhole on a Gibson Trini Lopez (Photo 3). Again, you hear mic first, then mic and amp simulation together.
Ex. 2
It sounds surreal. There's reverb on the mic signal, while the faux-amps are bone-dry. Since low notes disproportionately drive the amp, low chords seem to come from the sides, while the center-panned mic signal predominates when low notes are absent. There's no panning automation, yet the sound seems to oscillate between the center and sides. The "not found in nature" dirty/clean blend adds more weirdness. You know how fat distorted tones can vanish in a mix? This composite won't.
Take It to the Bridge
Photo 4
Another place only lav mics can go is beneath bridge hardware. For Ex. 3 I slid the mic under the metal hardware of the Trini's tailpiece, securing it with tape (Photo 4). (Use painter's tape, which leaves no sticky residue.)
Ex. 3
Yow—that vibrating metal is super-bright! Yet it sounds cool combined with two amp simulators panned left and right. The right-channel amp has delay, also panned right, while the other amp is dry. The mic sound is panned center, but its delay is panned hard left, opposite the amp delay. It's a compelling sonic soup.
Photo 5
A Bigsby tailpiece sounds quite different. For Ex. 4 I switched to a homemade Bigsby-equipped "parts" guitar, aiming the mic toward the strings behind the tension bar (Photo 5).
Ex. 4
Here the mic tone meshes nicely with a pawnshop combo simulation. I've processed the amp tone with stereo chorus/vibrato (from Universal Audio's Boss CE-1 plug-in) for a fun "rubber band" tone. The mic adds a hard percussive edge to a rather soft amp sound.
Nuts to You
Photo 6
For Ex. 5 I inserted the lav mic under the strings behind the nut (Photo 6). It was a tight fit on this guitar—some strings lightly touch the mic, creating a hard thwap that reminds me of an aggressively plucked upright bass (minus any actual bass frequencies).
Ex. 5
For the composite sound, I sent the mic signal to a short plate reverb, choosing the pre-fader send option so the reverb overshadows the dry signal. The amp tone is warm and dry. Result: a clip-clopping, horse's hooves effect. Both mic and amp are panned dead center, but the mic's reverb provides stereo animation. Only the highest highs get reverb—another surreal effect.
Sounds like these aren't for all occasions—god forbid! But the extended treble and snappy attack of mic tones sometimes add welcome edge, animation, and just plain weirdness. These composite sounds won't disappear in a mix—or a listener's memory.
[Updated 10/11/21]
- Eliminate Mic-Placement Guesswork with the "Shavering ... ›
- The Recording Guitarist: Two Mics Are (Sometimes) Better than One ... ›
- Tracking Guitars? Get a Room! - Premier Guitar ›
- Recording Dojo: The Case for Miking Your Electric Guitar - Premier Guitar ›
- Recording Dojo: The Case for Miking Your Electric Guitar - Premier Guitar ›
- How to Get Better Recorded Guitar Tones - Premier Guitar ›
With advanced controls, full MIDI integration, and expression pedal compatibility, the Elipse is designed for guitars, bass, synthesizers, vocals, and vintage keyboards.
Powered by Kernom’s patented Analog Morphing Core technology, the Kernom ELIPSE isn’t just another modulation pedal. With the innovative MOOD control, musicians can seamlessly morph between iconic modulation effects, from rhythmic tremolos and lush choruses to jet-like flangers and swirling phasers. The addition of the SWIRL control introduces a unique phaser-blend for rich, multidimensional textures.
Key Features
Iconic effects and more
The ELIPSE offers a wide range of modulation effects, including tremolo, harmonic tremolo, rotary speaker, vibrato, chorus, tri-chorus, flanger, phaser, and Univibe.
Innovative controls
MOOD Knob: Seamlessly transition between effects, creating rich, hybrid sounds.
SWIRL Control: Blend a slow phaser with other effects for multidimensional textures and get that “fat tones” you’ve always dreamed of, enhanced by an analog drive circuit for reacher harmonics.
Creative Modulation Tools
Advanced controls like SHAPE, MIX, and DEPTH let you tailor waveforms, blend dry/wet signals, and adjust intensity to craft your perfect tone.
Full MIDI integration
Save up to 128 presets, control all parameters via MIDI CC (including Tap Tempo and MIDI Clock), and sync with your DAW or MIDI controller.
Manage your presets and settings with the MIDI Controller Companion software.
Expression pedal
Morph between presets in real time for unparalleled dynamic expression during performances or studio sessions.
Perfect with other instruments
Built for versatility, the ELIPSE excels with guitars, bass, synthesizers, vocals and vintage keyboards. Its input stage is designed to handle both instrument and line-level signals seamlessly.
The rugged aluminum casing ensures reliability in any environment.
The Kernom ELIPSE will be available starting January 21, 2025, at a retail price of $369 (MAP). ELIPSE will be available globally beginning January 21, 2025.
Experience the ELIPSE at NAMM 2025—visit us at booth #5439.
For more information, please visit kernom.com.
Tone Demo | Kernom ELIPSE Modulation Effect - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Leveraging 3D printing technology, the new Floyd Rose Original locking nuts are designed to deliver unmatched precision and consistency, replacing the traditional “lost wax” casting method that dominated for decades.
The shift to 3D printing allows for intricate detailing and tighter tolerances, ensuring each nut meets exact specifications.
The process begins with powdered metal, which is precisely 3D printed into the desired shape using advanced metal printing technology. After printing, the parts are depowdered and cleaned before undergoing a sintering process—an advanced heat treatment—during which the parts achieve full density and hardness. Lastly, the nuts are CNC “kiss-cut” to exacting specifications for consistency and control of the fit before receiving a premium electroplating finish.
“Floyd Rose has always been synonymous with innovation, and by embracing this incredible new technology we are able to continue that legacy,” said Andrew Papiccio, president of AP International Music Supply of which Floyd Rose is a division. “The accuracy and flexibility of the new 3D printing method will allow us to make a more consistent piece while also giving us full control of the manufacturing right here in the USA.”
Initially, the 3D-printed locking nuts will be available in ten classic sizes with a 10” radius, with plans to expand the range to accommodate various fretboard radii in Spring 2025. This augmentation will offer players more options for customizing their setups to match a wide variety of fretboard curvatures.
To get a sneak peek at the new Floyd Rose USA Series, come visit us at NAMM in booth 5734 in Hall D.
With flexible voltage adjustments, precise control, customizable protection, compact design, and affordable pricing at $299, the Brownie is the ultimate solution for optimizing tone and safeguarding your gear.
AmpRx, the trusted name behind the industry-renowned BrownBox, has unveiled its newest innovation: The Brownie, a voltage-optimizing power supply for modern amps and the first of its kind.
Designed by AmpRx co-owner and CEO Cassandra Sotos (2024 NAMM Female Entrepreneur of the Year), the Brownie provides unparalleled control, flexibility, and protection specifically for modern tube amplifiers by allowing the player to both increase and decrease voltage with volt-by-volt precision.
Priced at $299, the Brownie offers an affordable and essential solution for protecting your investment in your high-quality tube amp. It allows you to optimize your tone and safeguard your gear from variations in voltage by givingthe ultimate advantage: knowing exactly what you’re feeding your amp.
Known as the secret weapon of touring professionals, AmpRx products have been spotted on stage with bands like the Red Hot Chili Peppers, Lynyrd Skynyrd, Zac Brown Band, Iron Maiden, and many more. AmpRx is now bringing its game-changing technology to an even broader audience with this compact, affordable, and versatile product. Try the Brownie for yourself and discover exactly why artists, amp designers, and technicians rely on AmpRx to provide consistent sound, performance, and extend the life of their gear.
The Brownie will be available January 20th, 2025, presented at NAMM Global Media Day and on display at Booth #5630.
WHAT MAKES THE BROWNIE SPECIAL? Building on the success of the flagship BrownBox, the Brownie offers key innovations tailored for modern amplifiers:
- Flexible Voltage Adjustments: The Brownie is the first in the AmpRx line to both decrease and increase voltage, providing optimal performance for modern tube amps (often at 117-120V).
- Precise Control: Adjust voltage in ultra-precise -1V increments when decreasing, and by +3V or +5Vwhen increasing, allowing musicians to fine-tune their tone with precision.
- Customizable Protection: The Brownie ensures safe operation, putting control directly in the player's hands, and includes two fuse options: 2A for smaller setups and 4A for larger setups, ensuring compatibility with diverse gear.
- Compact and Portable Design: Smaller and lighter than the original BrownBox, the Brownie is perfect for musicians seeking portability, durability, and streamlined functionality. It can even fit on a pedalboard or in a backpack.
- Wide Accessibility: At just $299, the Brownie offers professional-grade voltage control at a price point that’s accessible to musicians everywhere.
Email sales@brownbox.rocks to order and stop by NAMM Booth #5630 to see the Brownie in action, talk with the owners, team and artists, and see exactly why so many people insist onAmpRx products when they make music.
For more information, please visit brownbox.rocks.
Designed by Obeid Khan, this amp is designed to offer versatile tone control for classic amp sounds.
Magnatone LLC has introduced the StarliteReverb, a 1x8” combo that offers 5 watts of sweet-toned Class A power.
This amp is designed to capture the sound of classic long-pan spring reverb authenticity, thanks to the use of an Accutronics Digi-Log Reverb. Carefully optimized gain stages ensure the reverb seamlessly integrates with the amp’s natural sound, preserving the true classic tone of Magnatone amps.
- Output wattage: 5 watts, Class A
- Three control knobs: Volume, Tone and Reverb
- Magnatone Custom 8" Ceramic Magnet, Made by WGS in the USA
- Street Price: $1799
Obeid Khan, Magnatone’s engineer and tube amp guru, designed this model based on the success of the original Starlite model, and it uses the same classic single-ended amp with a 6V6 power tube. Khan’s unique tone control knob enables players to achieve classic “black-panel or tweed” tones with just a single knob.
Ted Kornblum, President & CEO of Magnatone LLC says “The Starlite Reverb is an amp much bigger than its size and power rating. When you put a microphone on it, it’s all you need!” TheStarlite Reverb blends analog tube warmth and lush reverb resulting in a subtle depth and modulation that adds dimension to your tone.
The Starlite Reverb is available to pre-order now in a 1x8” combo or with the matching 1x12” or 2x10” extension speaker cabinet. Shipping begins mid-2025.
For more information, please visit magnatoneusa.com.