Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Try Sidechaining for Greater Expression

Try Sidechaining for Greater Expression

Fig. 1

This time-proven approach can help keep vocal and guitar tracks at the fore.

Hello and welcome to another Dojo. This time, I’d like to explain sidechaining and how to use it on different sources for greater control and expressivity. Sidechaining typically involves routing the output of one track to control the dynamic range or volume of another track. Think of old-school radio broadcasts. Remember how every time the DJ spoke the music would “duck” or reduce in volume. This technique made a very quick transition into studio and live recordings, as mix engineers used it as a way to keep the lead vocalist on top of cymbal crashes, guitar solos, horns, background vocals, etc.


You may have also heard this technique in EDM-based music when a synth-bass line pumps (dips and swells in volume) in between each beat of the kick drum. This is what happens when the kick drum is bus-routed into a compressor on the synth-bass track.

Keeping this guitar-centric, sidechain compression can be valuable for many reasons that range from keeping your solo on top of rhythm parts to adding crazy textures to your power chords. You’ll need a compressor plug-in that accepts a side-chain input, and there are many to choose from. I’m going to use Fab Filter’s Pro-C 2 ($179 street), but another great choice is Waves’ Renaissance Compressor ($29.99 street).

Let’s get started. First, create two tracks in your DAW: one virtual instrument track (the source) loaded with a drum kit, and one audio track (the destination) where you will soon record a cool chord progression with held chords (clean or distorted).

You may have also heard this technique in EDM-based music when a synth-bass line pumps (dips and swells in volume) in between each beat of the kick drum.

On the instrument track, create a nice drum-kit groove (try something funky or even prog metal). Then, mute all the other parts of your virtual kit except the kick drum (for now) and hit record. Next, record yourself playing that cool chord progression with held chords on the audio track you created. (Play along to an unmuted version of your drum kit groove if you need it to record your guitar part.) Now, insert a compressor capable of sidechaining on this track’s effect insert [Fig.1].

At this point you should have: a kick drum loop on the instrument track and a chord progression recorded on the audio track. The compressor will be on the guitar track only.

Now, the fun begins. We are going to route the output of the drum track to the compressor’s input on the guitar track. Thus, every time the kit drum hits, it will trigger gain reduction on the guitar track.

These days I find myself tracking and mixing in at least two different DAWs, and every DAW has slightly different ways to do sidechain compression. This time, I’m going to use ProTools since it has been around the longest and (like it or not) is what most professional recording studios continue to use. There’s excellent intel for non-Pro Tools users at Fab Filter’s website support page, with directions for Studio One, Logic, Cubase, and Ableton.

Fig. 2

In Pro Tools, open the FabFilter Pro-C 2 that you’ve placed on your guitar track earlier. Click the sidechain window button at the bottom [Fig.2] and set sidechain from internal (In) to external (Ext).

Fig. 3

Now select the triangle next to MIDI Learn and make sure Enable MIDI is deselected [Fig.3].

Fig. 4

Next, in the key input menu of the plug-in interface, which is just above the FabFilter logo [Fig.4], choose Bus 1 instead of the default no key input. The compressor is now looking for an external source to trigger compression.

Fig. 5

Now, let’s bus-route the drum track to the guitar track’s compressor. In the sends slot of the drum track, select Bus 1. The bus view window for Bus 1will pop up: set its level to 0.0 dB (so it will send audio signal to the compressor) and select ‘PRE’ (pre-fader) [Fig. 5]. You’ve now routed the audio (using Bus 1) from the drum track to the compressor’s side chain input on the guitar track.

If you mute the drum track, you’ll be able to hear how it is affecting the guitar track. Now you can play with the threshold, attack, ratio, and release. Start with a quick attack (.010-.025 ms), a low threshold, and a fast release time (75-200 ms), then adjust to taste. The right release time depends upon the tempo of the song. Ideally, you want the compressor to be fully reset before the next kick drum hit.

Now that you understand sidechaining, you can experiment with other effects like sidechainable gates, EQs, and delays. More on that next time. Until then, keep experimenting! Namaste.

Featuring FET instrument inputs, "Enhance" switch, and innovative input stage, this pedal is designed to solve challenges like poor feel, setting levels, and ease of use.

Read MoreShow less

Firebirds came stock with a solid G-logo tailpiece, although Bigsby vibratos were often added.

Photo by George Aslaender

The author’s PX-6131 model is an example of vintage-guitar evolution that offers nostalgic appeal in the modern world—and echoes of AC/DC’s Malcolm Young.

An old catchphrase among vintage dealers used to run: “All Gretsches are transition models.” While their near-constant evolution was considered confusing, today their development history is better understood. This guitar however is a true transition model, built just as the Jet line was undergoing major changes in late 1961.

Read MoreShow less

On her new record with her trio, Molly Miller executes a live-feeling work of structural harmony that mirrors her busy life.

Photo by Anna Azarov

The accomplished guitarist and teacher’s new record, like her lifestyle, is taut and exciting—no more, and certainly no less, than is needed.

Molly Miller, a self-described “high-energy person,” is fully charged by the crack of dawn. When Ischeduled our interview, she opted for the very first slot available—8:30 a.m.—just before her 10 a.m. tennis match!

Read MoreShow less
DØVYDAS & John Bohlinger Busk in Downtown Nashville
DØVYDAS & Bohlinger Busk in Downtown Nashville Before We Give Takamine Guitar & Fishman Amp to Local

Then we give a Takamine guitar & Fishman amp to an up-and-coming Nashville musician.

Music City is always swirling with top-notch musicians performing anywhere they can, so Takamine and Fishman challenged PG's John Bohlinger to take his talents downtown to—gig on the street—where he ran into YouTube sensation DØVYDAS and hands over his gear to rising star Tera Lynne Fister.

Read MoreShow less