Think about the inspiration we’ve all had from hearing an amazing electric guitar recording. I know it’s literally altered my career path, and I’m sure countless others will have similar stories. But getting that perfect sound from the speaker to tape is no easy task. There are infinite combinations of pickups, strings, amps, cables, instruments and players, each with their own tonality (and an endless number of opinions, too!). However, right up there in the order of importance is certainly the choice of microphone. Each selection will add a little something different to the sound, and no one choice is always the right one.
The Mics
 |  |  |
| Shure SM57 List: $170 Certainly a classic, this reliable, rugged dynamic mic has a frequency response of 40Hz–15kHz. Its relatively tight cardioid polar pattern and ability to take high volumes make it a first-call on many sessions. Due to its aggressive mid-range growl, it’s a perfect companion to blend with “darker” mics. When it comes to bang for the buck, the SM57 is hard to beat. Download Audio | Royer R-121 List: $1395 The R-121 is a dynamic Ribbon mic with a Figure-8 polar pattern. Like other ribbons, it’s warm, creamy and natural. Unlike most other ribbons, it was built to take a max SPL rating of 135dB, making it a great cabinet mic. Also, by turning it around and reversing the phase, the back is sonically brighter at distances of two feet and closer. We found its face-front sound to be one of our favorites overall for warmth and character—a perfect blend with an SM57. Download Audio | Neumann U 87 (Ai) List: $3998 Another legendary classic, this large diaphragm mic has three polar patterns (cardioid, omni, figure-8). We used an older model in cardioid mode, but the new Ai version has circuitry to increase the headroom by 10dB. With the rear switch attenuated, the U 87 can take up to 127dB and has a frequency response of 20Hz–20kHz. You can hear the “beef” on both clean and distorted parts, and very nice attitude on distorted sound. Download Audio |
 |  |  |
| Shure SM58 List: $188 Almost always thought of as a vocal mic, sometimes you just have to put one up on a cabinet. Like the SM57, its price, midrange peak, 50Hz–15kHz frequency response and ability to handle massive gain make it a mic drawer classic. Essentially a 57 with a different grill and more girth, it sounded surprisingly good on the clean parts. Download Audio | Earthworks QTC1 (Same as QTC40) List: $1295 An omni? Sure, why not! The QTC’s small diaphragm gives it a realistic and accurate sound. A super-wide frequency range of 4Hz–40kHz and max acoustic input of 142dB SPL make it a great option. It had a very natural sound—what you heard in the room is what came out of the speakers. Download Audio | Sennheiser MD 421 List: $598 A cardioid mic with a five-position bass rolloff (to help eliminate proximity effect), this mic is a classic tone heard for decades now. Its frequency response of 30Hz–17kHz and ability to take very high SPLs give it a full, round sound. It works great with other mics, and by itself sounded warm and full, with slightly rolled off highs. Download Audio |
 |  |  |
| Beyerdynamic M 160 List: $799 The M 160 is a hypercardioid, dynamic ribbon mic that has two ribbons arranged one above the other a half-millimeter apart. It’s got a max SPL of 129dB and a frequency response of 40Hz–18 kHz. Its big, ribbony sound is always a favorite for good reason. Download Audio | Audix i5 List $179 The i5 is a dynamic, general-purpose mic with a cardioid polar pattern. It has a frequency response of 50Hz–16kHz and a max SPL of 140dB—so it can take it hard. It sounds like a 57, but with additional presence and upper mid clarity, and would make a great partner with a MD 421 or Royer. Download Audio | Audio-Technica AT4060 List: $1665 This is a large cardioid, vacuum tube condenser with a large, 2-micron-thick gold diaphragm and separate power supply. It features 20Hz–20kHz specs and can take up to 131dB SPL, which is a lot for a tube mic. While it may not be the best call by itself, it would make a nice mic to put back around 3–4 feet for some additional room sound. Download Audio |
 |  |  |
| Coles 4038 List: N/A The 4038 is a studio ribbon mic designed by the BBC for broadcasting and recording. It’s bidirectional (figure-8) with a frequency response of 30Hz–15kHz and can take up to 125dB SPL—although we had to move this back to 11 inches for breakup factor. Another classic ribbon sound with the softened highs and warm overall tone, there’s no denying this one. Download Audio | Audio-Technica AT4047/SV List: $745 This good-looking condenser mic has a wide frequency response of 20Hz–18kHz and the ability to take up to 159dB SPL with the 10dB pad in. There’s a switchable 80Hz hi-pass filter as well, and it features a gold plated dualdiaphragm capsule design. It captured both crisp highs and a well-rounded bottom. Download Audio | AKG 414 B-ULS List: $1349 Wow, another classic. The 414 has five switchable polar patterns (omni, wide cardioid, cardioid, hyper cardioid, figure-8) and a large, 1-inch diaphragm. It’s got 20Hz–20kHz frequency response and a max SPL of up to 158 with -18dB of attenuation switched in. We set it to cardioid, no pad. This mic cuts through a mix well and has lots of attitude. Download Audio |
 |  |  |
| EV RE20 List: $750 Often referred to as the “donkey dick” mic, this large diaphragm dynamic cardioid monster routinely seen and heard on radio/TV broadcasts has a frequency response of 45Hz–18kHz. Commonly used in guitar session work, it makes a great complement to other mics, such as the 57. We used a PL15, which is basically the same model. It’s got great low end in both the clean and distorted parts… smooth upper mids and not too much high end. Download Audio | Shure SM7B List: $619 This dynamic is often viewed as a radio mic, but it has a smooth sound and 50Hz–20kHz frequency response. There are bass roll-off and mid-range emphasis switches, but we set it flat. With an immediately pleasing sound both clean and distorted, it’s got a bottom-heavy focus that works great alone or in conjunction with a brighter mic—great attitude. Download Audio | M-Audio Luna List: $399 Now available as the Luna II, this cardioid condenser has a large, solid brass capsule, Class-A electronics and a 10dB pad, which lets it handle up to 140dB SPL. It has a good, full low end and smooth mids, especially on the distorted tracks, and is well balanced. Download Audio |
 |  |  |
| Heil PR 40 List: $375 A dynamic supercardioid mic from Heil Sound, it features a large low-mass aluminum diaphragm, a heavy steel case and a wide frequency response from 28Hz–18kHz. Very nice bottom and high end, almost nondescript in a positive way. It sounds really cool with a Coles 4038, or the like. Download Audio | B&K 4006 List: $1925 (as DPA 4006) Now labeled under the DPA name, this high-end, phantom-powered omni mic is often used in classical recordings. Its got an extremely linear frequency response from 20Hz–20kHz, and can take up to 143dB max SPL. It sounds quite natural, with non-extended highs and lows that give you back just what you put in front of it. Download Audio | Reslo List: N/A A classic English ribbon mic from the early sixties, it’s got a frequency response of 40Hz–15kHz… no wonder it can be heard on some of those classic Beatles recordings. The output sounds like analog tape through an old tube console. Download Audio |
Below, Grammy Award Winning engineer/producer Pete Moshay and I put a nice selection of mics up on an electric guitar session, all ranging in street price from $99 to over $4000. From the desert island Shure SM57 to a vintage Coles 4038 ribbon, there’s something for everyone.
The Method
I recorded two guitar licks directly into Pro Tools HD at 24-bit, 48kHz using a Creation Audio Labs MW1 and a stock early-nineties American Standard Telecaster, set to the middle pickup position. We then fed that output into a Mesa Boogie MKIV (Full power, Triode and Simul-Class settings) head and a Boogie 4x12 cabinet with Black Shadow speakers in Moshay’s A-frame live room (plugged into a balanced power source).
Using our ears to pick the best speaker, we then placed each mic directly on axis, about two inches from the grill, just to the left outside the center of the cone. We used a Little Labs IBP to run the signal from Pro Tools to the amp, bringing the +4dB line level signal to guitar level. Each lick was recorded first on the Boogie’s Channel 1 clean setting, then on Channel 3 with some tube saturation. We used a Focusrite ISA 828 on Medium impedance (which we felt imparted the least coloration on the varied mic impedances), running the signal directly into Pro Tools with the preamp’s A/D converters, all clocked with an Apogee Electronics Big Ben. No patch bay was used.
The only adjustments made were to maintain a consistent signal where the peaks hit around -3–4 dB, using a 1kHz tone sent into the amp at approximately -25dB. With all the various types, models and dynamic ranges of the mics, it’s not a perfect science to get exact measurements and levels, but we tried to keep everything as even as possible.
Shure SM57
Certainly a classic, this reliable, rugged dynamic mic has a frequency response of 40Hz–15kHz. Its relatively tight cardioid polar pattern and ability to take high volumes make it a first-call on many sessions. Due to its aggressive mid-range growl, it’s a perfect companion to blend with “darker” mics. When it comes to bang for the buck, the SM57 is hard to beat.
$99 street
shure.com
Royer R-121
The R-121 is a dynamic Ribbon mic with a Figure-8 polar pattern. Like other ribbons, it’s warm, creamy and natural. Unlike most other ribbons, it was built to take a max SPL rating of 135dB, making it a great cabinet mic. Also, by turning it around and reversing the phase, the back is sonically brighter at distances of two feet and closer. We found its face-front sound to be one of our favorites overall for warmth and character—a perfect blend with an SM57.
$1,295 street
royerlabs.com
Neumann U 87 Ai
Another legendary classic, this large diaphragm mic has three polar patterns (cardioid, omni, figure-8). We used an older model in cardioid mode, but the new Ai version has circuitry to increase the headroom by 10dB. With the rear switch attenuated, the U 87 can take up to 127dB and has a frequency response of 20Hz–20kHz. You can hear the “beef” on both clean and distorted parts, and very nice attitude on distorted sound.
$3,650 street
en-de.neumann.com
Shure SM58
Almost always thought of as a vocal mic, sometimes you just have to put one up on a cabinet. Like the SM57, its price, midrange peak, 50Hz–15kHz frequency response and ability to handle massive gain make it a mic drawer classic. Essentially a 57 with a different grill and more girth, it sounded surprisingly good on the clean parts.
$99 street
shure.com
Earthworks QTC1
An omni? Sure, why not! The QTC’s small diaphragm gives it a realistic and accurate sound. A super-wide frequency range of 4Hz–40kHz and max acoustic input of 142dB SPL make it a great option. It had a very natural sound—what you heard in the room is what came out of the speakers.
$1,998 street
earthworksaudio.com
Sennheiser MD 421
A cardioid mic with a five-position bass rolloff (to help eliminate proximity effect), this mic is a classic tone heard for decades now. Its frequency response of 30Hz–17kHz and ability to take very high SPLs give it a full, round sound. It works great with other mics, and by itself sounded warm and full, with slightly rolled off highs.
$399 street
en-us.sennheiser.com
Beyerdynamic M 160
The M 160 is a hypercardioid, dynamic ribbon mic that has two ribbons arranged one above the other a half-millimeter apart. It’s got a max SPL of 129dB and a frequency response of 40Hz–18 kHz. Its big, ribbony sound is always a favorite for good reason.
$699 street
north-america.beyerdynamic.com
Audix i5
The i5 is a dynamic, general-purpose mic with a cardioid polar pattern. It has a frequency response of 50Hz–16kHz and a max SPL of 140dB—so it can take it hard. It sounds like a 57, but with additional presence and upper mid clarity, and would make a great partner with a MD 421 or Royer.
$99 street
audixusa.com
Audio-Technica AT4060
This is a large cardioid, vacuum tube condenser with a large, 2-micron-thick gold diaphragm and separate power supply. It features 20Hz–20kHz specs and can take up to 131dB SPL, which is a lot for a tube mic. While it may not be the best call by itself, it would make a nice mic to put back around 3–4 feet for some additional room sound.
$1,699 street
audio-technica.com
Coles 4038
The 4038 is a studio ribbon mic designed by the BBC for broadcasting and recording. It’s bidirectional (figure-8) with a frequency response of 30Hz–15kHz and can take up to 125dB SPL—although we had to move this back to 11 inches for breakup factor. Another classic ribbon sound with the softened highs and warm overall tone, there’s no denying this one.
$1,438 street
Audio-Technica AT4047/SV
This good-looking condenser mic has a wide frequency response of 20Hz–18kHz and the ability to take up to 159dB SPL with the 10dB pad in. There’s a switchable 80Hz hi-pass filter as well, and it features a gold plated dualdiaphragm capsule design. It captured both crisp highs and a well-rounded bottom.
$699 street
audio-technica.com
AKG C414
Wow, another classic. The 414 has five switchable polar patterns (omni, wide cardioid, cardioid, hyper cardioid, figure-8) and a large, 1-inch diaphragm. It’s got 20Hz–20kHz frequency response and a max SPL of up to 158 with -18dB of attenuation switched in. We set it to cardioid, no pad. This mic cuts through a mix well and has lots of attitude.
$1,155 street
akg.com
Electro-Voice RE20
Often referred to as the “donkey dick” mic, this large diaphragm dynamic cardioid monster routinely seen and heard on radio/TV broadcasts has a frequency response of 45Hz–18kHz. Commonly used in guitar session work, it makes a great complement to other mics, such as the 57. We used a PL15, which is basically the same model. It’s got great low end in both the clean and distorted parts… smooth upper mids and not too much high end.
$449 street
electrovoice.com
Shure SM7B
This dynamic is often viewed as a radio mic, but it has a smooth sound and 50Hz–20kHz frequency response. There are bass roll-off and mid-range emphasis switches, but we set it flat. With an immediately pleasing sound both clean and distorted, it’s got a bottom-heavy focus that works great alone or in conjunction with a brighter mic—great attitude.
$399 street
shure.com
M-Audio Luna
Now available as the Luna II, this cardioid condenser has a large, solid brass capsule, Class-A electronics and a 10dB pad, which lets it handle up to 140dB SPL. It has a good, full low end and smooth mids, especially on the distorted tracks, and is well balanced.
m-audio.com
Heil PR 40
A dynamic supercardioid mic from Heil Sound, it features a large low-mass aluminum diaphragm, a heavy steel case and a wide frequency response from 28Hz–18kHz. Very nice bottom and high end, almost nondescript in a positive way. It sounds really cool with a Coles 4038, or the like.
$299 street
heilsound.com
DPA 4006
Now labeled under the DPA name, this high-end, phantom-powered omni mic is often used in classical recordings. Its got an extremely linear frequency response from 20Hz–20kHz, and can take up to 143dB max SPL. It sounds quite natural, with non-extended highs and lows that give you back just what you put in front of it.
$2,339 street
dpamicrophones.com
Reslo
A classic English ribbon mic from the early sixties, it’s got a frequency response of 40Hz–15kHz… no wonder it can be heard on some of those classic Beatles recordings. The output sounds like analog tape through an old tube console.
[Updated 12/12/21]
Billy Doyle of Man/Woman/Chainsaw
A: I think the most rewarding aspect of music is the rush and chaos of playing live shows with my friends. I really love the tension—not knowing what’ll go wrong each night and what’ll come together nicely.
Billy’s recent fascination has been with The Last Waltz, both film and accompanying album.
Obsession: This summer I discovered the Band’s The Last Waltz concert film and album and fell into a mini obsession with it. Seeing some of the most stellar songwriters of their era share a stage is really special, not to mention how comfortable as a unit the Band is and how high the standard of musicianship is—Levon Helm singing his heart out while playing the drums is particularly wicked. Joni Mitchell’s performance of “Coyote” and Van Morrison’s rendition of “Caravan” are both particularly special, as I grew up listening to those artists. It’s a great insight to be able to learn these songs exactly how they played them.
Eddie Carter - Reader of the Month
A: The most rewarding aspect of playing for me is when I connect with the audience. The main purpose of playing music live, in my opinion, has always been to take the audience away from everyday life for a while. Life smacks a person down a lot, whether it’s a bad day at work or school, bills you can’t keep up with, bad news, etc. When a person goes to hear live music, they want to forget that and have some fun and unwind. When I see the audience smile, sing along, or dance, I know I’ve managed to help with that. That’s why I enjoy doing cover songs and just mix in an original here or there. It’s also why I try to do a variety of music from several decades.
A recent go-to for Eddie has been Duane Betts’ Wild & Precious Life.
Obsession: I guess my current obsession is looping. I don’t plan to get into looping as deep as Phil Keaggy, or use drums and keyboards. I do enjoy stacking parts on guitar and even playing mandolin over a guitar loop, though. It helps with making a song sound more like the recorded version. I also use a looper, a Boss RC-500, to store and make backing tracks for a few songs.
Jon Levy - Publisher
For Jon, Pretenders’ self-titled never gets old.
A: Playing music has enriched my life in so many ways, it’s hard to pick the most important one. Is it the headrush from writing and recording? The thrill of live gigs? The champagne-soaked limousine rides with supermodels and celebrity fans? (Just kidding about that last one.) To be honest, it’s the deep friendship and goofy camaraderie with my bandmates. My entire social life is based on music, and it makes the backaches, hangovers, and tinnitus totally worth it.
Nashville-based singer-songwriter Stephen Wilson Jr. is in Jon’s current rotation.
Obsession: Not looking at my hands when I’m playing. It forces me to concentrate on what I’m hearing and feeling—stuff that’s actually musical, rather than visual. I still ogle the fretboard a bunch, but I’m consciously trying to rely on my other senses as much as possible.
Brett Petrusek - Director of Advertising
Brett’s a big fan of Iron Maiden’s Killers, but also loves Miles Davis’ timeless Kind of Blue.
A: All of it. There are so many seasons and the change of the seasons is what makes it so great. Hitting the perfect riff to inspire a new song. Recording: layering guitars and vocals, hearing the tracks build up and turn into a mix (I really love this part). Creating a body of work. Being on stage with your band and feeling the roar of your guitar through the PA. Connecting with an audience, or better yet, knowing a single person connected with your music in a meaningful way. Watching my team develop and get better at the game. I feel fortunate just to be able to do it and to be able to share the experience with my group, Fuzzrd. The single most important thing? It’s unconditionally always there for me—and it alway starts with a guitar.
Irish hard-rocker Gary Moore’s Victims of the Future is a favorite of Brett’s.
Obsession: Taking a page from the legendary Gary Moore’s playbook: “So try and leave some big moments of silence in your solos—at least twice as long as what comes to you instinctively. After a while, you get in the habit of hearing those spaces, and the waiting comes naturally. And if you’ve got a good tone, you’ll create this anticipation where the audience can’t wait for the next note.”
Gallagher’s road worn Strat in play in the cover of his 1972 concert album.
Unless you are living in a cave, you should know who Rory Gallagher was and will recognize his beaten-up Fender Stratocaster, which is a symbol of pure rock ’n’ roll. The story goes that Rory bought this used 1961 sunburst Stratocaster in 1963 for £100 in Cork, Ireland, in a shop named Crowley’s Music Store. Allegedly, this was the first Stratocaster ever to reach Ireland. The guitar’s previous owner ordered a red Stratocaster from the U.S., but a sunburst came instead. After using the guitar for around half a year, the red one arrived. The sunburst was exchanged and put on sale, and Gallagher soon found it. True or not, the story is simply priceless.
When Rory bought this Strat, it was absolutely factory stock, which was typical for this time. It stayed that way for a long time and became a piece of musical history in the hands of Rory. Nearly all of the sunburst lacquer was naturally removed over the years by Gallagher’s acidic sweat, so today the guitar is almost completely stripped down to the bare wood, giving it its iconic look.
The first mods done to this guitar happened around the mid-70s, when two of the pickups were damaged and had to be replaced. Later on, some other parts like the pickguard and pickup covers had to be replaced, and in his later career he did start to use different pickups. The standard 3-way pickup-selector switch was replaced with a more modern 5-way switch, and the controls were rewired for master volume and master tone with the middle tone pot disconnected.
What was the secret behind Rory’s unmistakable Stratocaster tone, which he had from the start? First and foremost, and without any doubts, you all know the saying: Tone comes from the fingers! When such outstanding playing chops meet a great instrument, the result is marvelous.
Having said that … Rory’s pickups did play a large role in his sound. The standard Stratocaster pickups Fender used at the time had staggered magnets with beveled edges. There is complex physics behind it, but in basic terms, these pickups sound fatter, sweeter, and with more overtones. The beveled edges greatly influence the magnetic field, which causes them to sound so different. This has to do with the pickup’s unique aperture or “magnetic window.” These were hand-beveled edges, and it was generally assumed that this was done to disguise the rough and uneven surface left by the sand casting. But this can’t be the reason because doing such handiwork takes a lot of time and care to get right, and Leo Fender wasn’t known for spending time on such unnecessary things in his building processes. (Later, Fender stopped beveling and the sound of the pickups changed because of this.)
In 2016, Seymour Duncan explained the tone of beveled pickups to Guitar.com: “The bevel causes the magnetic field to shoot out a little around the bevel area, but it results in a tapering of the field above that point. So, if you could, imagine the magnetic field shaped like the flame of a candle or a teardrop.” That’s an excellent metaphor that hits the nail on the head.
“Depending on the employee working the sanding machine, the edges are more or less beveled from pickup to pickup—one of the reasons why vintage Strats sound so different from guitar to guitar.”
But why did Fender originally do hand beveling and why did they stop later on? Were his choices based on tone? I don’t think so. I think the answer must be seen in the historical context of the time.
The alnico 5 material used for the magnets was brand-new and very expensive at that time. It was also very porous, and many magnets crumbled while using a hammer to drive them into the pickup, which was the usual procedure in the Fender factory. So, Fender started hand beveling the magnets on one side, which minimized the risk of destroying the magnet during the hammering process. It was an accident that this created such great tone. Depending on the employee working the sanding machine, the edges are more or less beveled from pickup to pickup—one of the reasons why vintage Strats sound so different from guitar to guitar.
Here you can see the normal, non-beveled magnets of a Stratocaster pickup:
Photo courtesy of Leosounds (https://leosounds.de)
And here is a faithful recreation of the beveled magnets in Gallagher’s Stratocaster:
Photo courtesy of Leosounds (https://leosounds.de)
Gallagher’s pickup set has a very pronounced bevel. The Fender worker who produced these certainly also created some more sets like this.
The influence of the bevel on a pickup’s tone is huge. To give a better idea, here are some magnetic visualizations that my dear friend Bernd C. Meiser from the German BSM company made for me. Bernd sadly died on July 30, 2024, after fighting against cancer for two years. It won’t get loud anymore without him.
Here you can see the common magnetic spread-out of a non-beveled Strat pickup:
Drawing courtesy Singlecoil (https://singlecoil.com) in memory of Bernd C. Meiser
And here is the same with a beveled Strat pickup:
Drawing courtesy Singlecoil (https://singlecoil.com) in memory of Bernd C. Meiser
You can clearly see the difference of the magnetic spread-out and the much wider aperture these beveled magnets provide, causing the different tone.
So where is the mod for this column? I’m sorry to disappoint you, but it’s not possible to change the magnets on a standard Stratocaster pickup without destroying the pickup. And there is no way to retroactively put a bevel on the magnets of your pickup with the magnets installed. The only way to convert your Strat to beveled pickups is to install a new pickup set with beveled magnets. Fender ’57/’62 pickups feature beveled edges, as do many offerings from other pickup companies.
Next time, we will have a look at the mid-boost and scoop mod from Dan Torres, so stay tuned!
Until then ... keep on modding!
To fully digest these changes, it makes sense to examine the progression in small chunks and see how it relates to the traditional blues form. First, let’s look at the “Bird” changes below. (Remember, in jazz circles a triangle means a major 7 chord and a dash means minor 7 chord.)
When looking at a traditional 12-bar blues in F, the first four measures are usually an F7 (I) moving to a Bb7 (IV) in measure 5. In this version, Parker works backwards from the IV chord with a series of IIm-V7 moves that descend in whole-steps. Measures 4 and 3 are “major” IIm–V7s, but the second measure uses a “minor” version with a half-diminished chord for the IIm. Finally, Parker changed the chord in the first measure from a dominant 7 to a major 7 to place us squarely in the key of F. (It also helps with voice-leading across the first four measures.)
YouTube It
Saxophonist Charlie “Bird” Parker was the figurehead of the bebop era. Listen to his relaxed, swinging take on “Blues for Alice,” which is one of his most popular compositions.
Ex. 1 demonstrates one way to navigate the first four measures. Let’s break that down a bit. I stick entirely within the F major scale (F–G–A–Bb–C–D–E) for the first measure. Easy enough. In the second measure, for the sake of simplicity, I am just implying A7 through both chords. The first two beats outline A7 (A–C#–E–G) and the remaining notes are plucked from the A Super Locrian scale (A–Bb–C–Db–Eb–F–G).
Click here for Ex. 1
I’m using a similar concept in Ex. 2, working with the F major scale in the first measure and thinking A7 in the second. I’m using the D melodic minor scale (D–E–F–G–A–B–C#) over the third measure while targeting the 3 of Cm7 (Eb) on the downbeat of the fourth measure. To create an altered sound over the F7b9, I use a Gbdim7 arpeggio (Gb–A–C–Eb) to nail the b9 (Gb).
Click here for Ex. 2
This next example (Ex. 3) takes cues from great piano players so it requires some quick position shifting. The first shift happens in the first measure, where we move from 5th position up to 8th on the “and” of beat 2. In the second measure, we imply an A7b9 sound using a Bbdim7 (Bb–C–E–G) arpeggio that touches on the #9 (C) and b9 (Bb).
In the second and third measures of this example, we’re basically using the same concept. Because D Dorian (D–E–F–G–A–B–C) and G Mixolydian (G–A–B–C–D–E–F) contain the same notes, we’re simply adding some chromatic passing tones that help the chord tones line up on strong beats. Move the whole concept down a whole-step (to C Dorian/F Mixolydian) for the next measure.
Click here for Ex. 3
The next section of a blues in F might look something like: Bb7–Bb7–F7–F7. Or, if you think of a traditional jazz-blues progression, it might be Bb7–Bdim7–F7–D7. Looking ahead, Parker wanted to target the Gm7 in measure 9. What’s the best way to lead into that chord? Simply add a IIm–V before it. Parker used backcycling to create a series of descending IIm-V7 progressions that connect the Bb7 in measure 5 to the Gm7 in measure 9. Rather ingenious, huh?
While these chords are easy enough to play with basic chord forms, it’s much trickier to solo through them in an authentic way.
Ex. 4 uses the Bb Mixolydian scale (Bb–C–D–Eb–F–G–Ab) over the Bb7 before moving to Eb Mixolydian (Eb–F–G–Ab–Bb–C–Db) for Bm7–Eb7. In the third measure, we move to A minor pentatonic (A–C–D–E–G) before coasting through an Abm7 arpeggio (Ab–Cb–Eb–Gb) for the last measure.
Click here for Ex. 4
The next lick (Ex. 5) demonstrates how you can use simple melodies to navigate this chord progression. The first measure is a simple lick based on the Bb7 chord, then we create a melody just using the F major scale—it’s all about landing on the Gm7 chord at the right time.
Click here for Ex. 5
Our final example over this section (Ex. 6) is just as loose with the chords, but makes sure to hit them as they land. The first measure uses the Bb major pentatonic scale (Bb–C–D–F–G) before using some outside notes that resolve to the root of the Am7 chord. At this point you should be seeing that a big part of the bebop genre is based on rhythm. The mixture of triplets and heavy syncopation is an essential part of the sound.
Click here for Ex. 6
The final section of a blues in F usually goes: C7–Bb7–F7–C7, but that’s too basic for beboppers. In Bird blues, we use a two-measure IIm-V7 progression before increasing the harmonic rhythm with F7–D7–Gm7–C7. In Roman numerals, this translates to I7–VI7–IIm7–V7.
I find the best way to play over this section is to remember you’re playing a blues, so some blues scale ideas might not be a bad idea, as shown in Ex. 7. We’ve even included some slight bends!
Click here for Ex. 7
This final example (Ex. 8) feels like another melody rather than something clever. Remember, we’re playing music, and often the best music is the type that your audience can sing along to. So don’t be afraid to hold off and play something melodic.
Click here for Ex. 8
Lastly, here’s a short backing track to help you practice these ideas, and then come up with some of your own. Keep listening and copying and before long you’ll be soaring like Bird!