Flash back to an era when 6-string beasts with names like Teisco, Silvertone, Hofner, Wandre, Cipher, and Maier (quietly) roared.
Let me take you back, good people, to a time when The Ed Sullivan Show was featuring rock ’n’ roll bands beamed into homes via brand-new color televisions. This was when the U.S.A. was experiencing a prosperous, post-WWII era filled with ideas of space exploration, jukeboxes packed with vinyl records, and muscle cars cruising the highways. For most in the States, the early 1960s was a great time to grow up and an even better time to want to play electric guitar. It was the era that birthed garage bands. Demand for electric guitars boomed, and guitars were being designed as original models rather than copies of copies. I could write several volumes about guitar design variations, but for this article let’s examine a curious chapter of electric guitar production: the age of fully transistorized Japanese electrics, from 1964 to 1966.
For historical perspective, let’s look at the dawn of solid-state technology. Back in 1947, Bell Laboratories developed an alternative to the costly and problematic vacuum tubes that powered most electronic devices. This transistor technology slowly found its way into consumer products, but was truly embraced in portable radio formats. Before this time many radios were huge and bulky, often positioned as the centerpieces of living rooms. Transistors made it possible to seriously downsize radios so you could carry a pocket-sized one, cranking out the latest Beatles tunes. It may not seem like much of an innovation compared to our palm-sized smart phones, but this new form of technology appealed to the young baby-boom generation. It allowed for more expedient ways to get news and music, all wrapped up in the novelty of transistor radio design. These little radios appeared concurrently with electric guitars in all sorts of pop-culture references on TV, in movies, and in print publications.
Transistor technology was available to many Americans in the 1950s, although the cost of such devices was often expensive. But a few visionary Japanese engineers were visiting the U.S., including Masaru Ibuka, with their eyes on the market. He was the co-founder of Sony, and his fledgling company began making transistorized electronic equipment under license from AT&T. By the early 1960s, Japan had become a major player in transistor radio production, with Sony competing with other Japanese companies such as Toshiba and Sharp. This manufacturing boom was concurrent with the electric-guitar boom and the explosion of popular guitar music. The planets aligned, and soon the technology of both guitars and radios morphed into an interesting combination: the “amp-in-guitar” concept.
Image 1: Attaching a simple, radio-like circuit board platform to a pickup begat the concept of onboard amplification.
One of the earliest examples of these transistor amplifiers appeared on the German-made Hofner “Bat” guitar of 1960—the year it debuted at a European trade show. The Hofner Bat, known as the Fledermaus in the company’s catalog, was produced in very low numbers and is now arguably the rarest of all Hofner electric guitars. It featured a pretty radical angular-but-symmetrical design that incorporated a transistorized amplifier and speaker inside the guitar’s body. Also appearing in the early ’60s were the Italian-made Wandre Bikini Avanti 1, which featured a detachable amp that connected to the lower bout of the guitar, and the Meazzi-branded Transonic, which had a fully integrated amp and speaker in its body.
Image 2: Wandre’s Bikini models sported a detachable amp that connected to the guitar’s lower bout.
Photo by Robert Patrick
Even though these models pre-dated the Japanese models with onboard amps, the Italian guitars were also hard to find in the U.S. and were very expensive. The Wandre Avanti 1 was imported by the Maurice Lipsky Music Company in the early ’60s and priced at an astounding $395.
Image 3: Italian guitars like the Meazzi Transonic arrived on these shores as pricey imports.
But the advertisement for the Avanti 1 read, “No Wires, No Outlet Worries, Plays Anywhere.” Those taglines really reflect the sense of freedom and mobility that transistor technology offered the guitar-playing community. Hey, take your Wandre Bikini to the beach party!
Teisco Silvertone TRG 1 Amp-in-Guitar Vintage Japan
Japanese guitar maker Teisco introduced two transistorized models in 1964: the round-necked TRG-1 and the TRH-1 lap steel. Of course, the true proliferation of the technology was dominated by the Japanese makers of the time, and the Teisco Company led the way when Japan Music Trades magazine featured the newly introduced Teisco TRG-1 in June 1964. Also introduced was a lap steel called the TRH-1.
Image 4: Teisco TRG-1
The “TR” standing for “transistor,” these new models were basically takes on existing guitar designs. The TRG-1 featured a slightly larger Teisco ET-300-style body and one pickup, with the small amplifier mounted under the pickguard where a bridge pickup would otherwise reside.
Image 5: Teisco TRH1
This model had a few different names in its early days, such as TRE-100, TRET-100 (with a tremolo), TRG-1, TRG-1L, and probably a few others. But they were all essentially the same model, offering “new sounds in music.” In 1964 and 1965, Teisco really promoted the amp-in-guitar models in Japan and, here in America, Weiss Musical Instruments was placing advertisements in Music Trades magazine as early as February 1965. Also appearing in 1965 was a Silvertone-branded variation, called the 1487 in Sears literature.
Image 6: Teisco’s ads of the era boasted “new sounds in music” and a decidedly “mod” look.
All of these Teisco-made guitars could be plugged into an amplifier and played like a “normal” guitar, or you could use the internal amplifier powered with 9V batteries that were installed through an access plate on the back of the guitar.
Image 7: Sears’ in-house guitar brand, Silvertone, entered the competition in 1965 with the 1487 model.
All of these Teisco-made guitars could be plugged into an amplifier and played like a “normal” guitar, or you could use the internal amplifier powered with 9V batteries that were installed through an access plate on the back of the guitar.
Image 8: A 3" speaker with 1 watt of power was de rigueur for the self-contained 6-strings of the 1960s.
The batteries fired a tiny transistor amplifier that put out about 1 watt of power through a 3" speaker. You definitely weren’t going to play a house party with this setup, but it was perfect for bedroom jamming and learning songs off the record player.
There were several other Japanese amp-in-guitar models that appeared during 1965, including a super-cool instrument made by the short-lived Shinko Gakki company in the city of Tatsuno. The rarely seen Shinko example was sold in the U.S. through the New York-based Inter-Mark Company, which branded all their guitars as “Cipher” models.
Image 9: This one-pickup Cipher model imported by the Inter-Mark Company originated in Tatsuno, Japan.
The Maier example pictured below was made by another Japanese manufacturer, forgotten by time. After examining the components, this guitar seems to have been produced in the Matsumoto area of Japan. Even the import name of “Maier” is a relative mystery. After pouring through stacks of trade magazines from the era, the only possible clue I’ve found is the R.J. Maier Corp. of Sun Valley, California.
Image 10
They were primarily known as a maker of clarinet and saxophone reeds, but during the guitar boom of the mid-’60s, all sorts of musical instrument companies were importing electric guitars. Either way, the Maier variation follows the familiar blueprint of a single-pickup guitar powering a tiny amp through a 3" speaker.
Image 11
Finally, this two pickup variation, also below, was made at yet another Japanese factory that remains a mystery. I have owned this same model without the internal amp, and the designers simply routed out the regular guitar bodies to accept the transistorized components. But this example features a headphone jack!
The makers of these guitars—a one-pickup model with a Maier-marked headstock and a two-pickup model with a headphone jack—are a mystery today.
There aren’t any records of how many of these amp-in guitars were sold, and I often wonder about the popularity of this format. But by 1966 most all of these guitars had vanished from catalogs, advertisements, and literature. As with many of the Japanese imports, these all-transistor guitars were relegated to closets and pawnshops. Rory Gallagher famously adored his Teisco TRG-1 and recorded with it. But other than that famous connection, the brief history of these guitars has been largely ignored.
Meazzi Supersonic Vintage 60s - Demo
So how do these internal amps sound? Well, they sound like a tiny transistor radio! And for those of you too young for the comparison, imagine a seriously lo-fi sound that’s tinny and raw. Really, these amps were more about portability than sound. Even when direct miked, they sound weak, but—as with all tones—there is a place for this sound in someone’s creative imagination.
Unfortunately, these old amps are almost always in need of repair due to bad capacitors. The values on these capacitors are often odd, but they can be repaired easily enough by almost any good electronics repair tech. I’ve owned eight of these transistorized electric guitars over the years, and all but one needed repair work on the amp circuitry. But when these guitars are fixed up, I love using them. I still take my Teisco TRG-1 to the shore every year. And when my kids were born, you can bet my playing was limited to the 1-watt amps in these guitars as I plucked lullabies in the wee hours of the night. Even today there’s a place for these oddities of ’60s technology and guitar playing!
Frank Meyers is the author of History of Japanese Electric Guitars, published in 2015.
[Updated 3/2/22]
Stompboxtober rolls on! Enter today to win a pedal from Electro-Harmonix. Keep coming back for daily chances to win!
Electro-Harmonix Lpb-3 Linear Power Booster & Eq Effect Pedal Silver And Blue
The effect that launched Electro-Harmonix gets a makeover with the Electro-Harmonix LPB-3 Linear Power Booster & EQ. With an active EQ featuring a Parametric Mids control and up to a walloping 33dB of boost, the LPB-3 is the perfect tool for any tone tailoring task. Boost your sound into saturated bliss with transformative precision like never before.
The LPB-3 is capable of boosting up to +33dB of gain with the powerful tone shaping of a 3-band EQ with parametric Mids. The active 3-Band EQ features TREBLE and BASS knobs plus a powerful parametric Mids control with adjustable MID FREQ and Q. BOOST sets the overall output of the pedal with the MAX switch toggling between 20dB and 33dB of maximum boost. Use the PRE-GAIN knob to fine-tune the total gain and boost.
Additional features include selectable Buffered/True Bypass switching and internally extended 30V power rails for enhanced headroom.
Although inspired by the classic Fuzz Face, this stomp brings more to the hair-growth game with wide-ranging bias and low-cut controls.
One-ups the Fuzz Face in tonal versatility and pure, sustained filth, with the ability to preserve most of the natural sonic thumbprint of your guitar or take your tone to lower, delightfully nasty places.
Pushing the bias hard can create compromising note decay. Difficult to control at extreme settings.
$144
Catalinbread StarCrash
catalinbread.com
Filthy, saturated fuzz is a glorious thing, whether it’s the writ-large solos of Big Brother and the Holding Company’s live “Ball and Chain,” the soaring feedback and pure crush of Jimi Hendrix’s “Foxy Lady,” or the sandblasted rhythm textures of Queens of the Stone Age’s “Paper Machete.” It’s also a Wayback Machine. Step on a fuzz pedal and your tone is transported to the ’60s or early ’70s, which, when it comes to classic guitar sounds, is not a bad place to be.
Catalinbread’s StarCrash is from their new ’70s collection, so the company is laying its Six Million Dollar Man trading cards on the table—upping the ante on traditional fuzz with more controls and, according to the company’s website, a little more volume than the average fuzz pedal, while still staying in the traditional Fuzz Face lane.
The Howler’s Viscera
Arbiter Electronics made the first Fuzz Face in 1966. The StarCrash is inspired by that 2-transistor pedal, but benefits from evolution, as did almost all fuzz pedals in the ’70s, when the standard shifted from germanium to silicon circuitry to improve the consistency of the effect’s performance. The downside is that germanium is gnarlier to some ears, and silicon transistors don’t respond as well to adjustments made via a guitar’s volume control.
While Fuzz Faces have only two knobs, volume and fuzz, the silicon StarCrash has three: volume, bias, and low-cut. Catalinbread’s website explains: “We got rid of that goofy fuzz knob. We know that 95 percent of all players run it dimed, and the remaining 5 percent use their guitar’s volume knob to rein it in.”
I suspect there are plenty of players who, like me, do adjust the fuzz control on their pedals, but the most important thing is that the core fuzz sound here is excellent—bristly and snarling, with a far girthier tone than my reissue Fuzz Face. It’s also, with the bias and low-cut controls, far more flexible. The low-cut control allows you to range from a traditional, comparatively thinner Fuzz Face sound (past noon and further) to the StarCrash’s authentic, beefier voice (noon and lower). Essentially, it cuts bass frequencies from 40 Hz to 500 Hz, resulting in an aural menu that runs from lush and lowdown to buzzy and slicing. And the bias control is a direct route to the spitty, fragmented, so-called Velcro-sound that’s become a staple of the stoner-rock/Jack White school of tone. The company calls this dial a “dying battery simulator,” and it starves the second transistor to achieve that effect.
Sweet Song of the Tribbles
Playing with the StarCrash is a lot of fun. I ran it through a pair of Carr amps in stereo, adding some delay and reverb to mood, and used a variety of single-coil- and humbucker-outfitted guitars. While both pickup types interacted well with the pedal, the humbuckers were most pleasing to my ears with the bias cranked to about 2 o’clock or higher, since the ’buckers higher output allowed me to let notes sustain longer before sputtering out. Keeping the low-cut filter at 9 o’clock or lower also helped sustain and depth in the Velcro-fuzz zone, while letting more of the instruments’ natural voices come through, of course.
With the low-cut filter turned up full and the bias at 10 o’clock, I got the StarCrash to be the perfect doppelganger of my Hendrix reissue Fuzz Face. But that’s such a small part of the pedal’s overall tone profile. It was more fun to roll off just a bit of bass and set the bias knob to about 2 or 3 o’clock. Around these settings, the sound is huge and grinding, and yet barre chords hold their character while playing rhythm, and single-note runs, especially on the low strings, are a filthy delight, with just the right schmear of buttery sustain plus a hint of decay lurking behind every note. It’s such a ripe tone—the sonic equivalent of a delicious, stinky cheese—that I could hang with it all day.
Regarding Catalinbread’s claims about the volume control? Yes, it gets very loud without losing the essence of the notes or chords you’re playing, or the character of the fuzz, which is a distinct advantage when you’re in a band and need to stand out. And it’s a tad louder than my Fuzz Face but doesn’t really bark up to the level of most Tone Bender or Buzzaround clones I’ve heard. In my experience, these germanium-chipped critters of similar vintage can practically slam you through the wall when their volume levels are cranked.
The Verdict
Catalinbread’s StarCrash—with its sturdy enclosure, smooth on/off switch and easy-to-manipulate dials—can compete with any Fuzz Face variant in both price and performance, scoring high points on the latter count. The bias and low-cut dials provide access to a wider-than-usual variety of fuzz tones, and are especially delightful for long, playful solos dappled with gristle, flutter, and sustain. Kudos to Catalinbread for making this pedal not just a reflection of the past, but an improvement on it.
Catalinbread Starcrash 70 Fuzz Pedal - Starcrash 70 Collection
StarCrash 70 Fuzz PedalIntrepid knob-tweakers can blend between ring mod and frequency shifting and shoot for the stars.
Unique, bold, and daring sounds great for guitarists and producers. For how complex it is, it’s easy to find your way around.
Players who don’t have the time to invest might find the scope of this pedal intimidating.
$349
Red Panda Radius
redpandalab.com
The release of a newRed Panda pedal is something to be celebrated. Each of the company’s devices lets us crack into our signal chains and tweak its inner properties in unique, forward-thinking ways, encouraging us to be daring, create something new, and think about sound differently. In essence, they take us to the sonic frontier, where the most intrepid among us seek thrills.
Last January, I got my first glimpse of the Radius at NAMM and knew that Red Panda mastermind Curt Malouin had, once again, concocted something fresh. The pedal offers ring modulation and frequency shifting with pitch tracking and an LFO, and I heard classic ring-mod tones as the jumping off point for oodles of bold sounds generated by envelope and waveform-controlled modulation and interaction. I had to get my hands on one.
Enjoy the Process
I’ve heard some musicians talk about how the functionality of Red Panda’s pedals are deep to a point that they can be hard to follow. If that’s the case, it’s by design, simply because each Red Panda device opens access to an untrodden path. As such, it can feel heady to get into the details of the Radius, which blends between ring modulation and frequency shifting, offering control of the balance and shift ratios of the upper and lower sidebands to create effects including phasing, tremolo, and far less-natural sounds.
As complex as that all might seem, Red Panda’s pedals always make it easy to strip the controls down to their most essential form. The firmest ground for a guitarist to stand with the Radius is a simple ring-mod sound. To get that, I selected the ring mod function, turned off the modulation section by zeroing the rate and amount knobs, kept the shift switch off and the range switch on its lowest setting. With the mix at noon and the frequency knob cranked, I found my sound.
From there, by lowering the frequency range, the Radius will yield percussive tremolo tones, and the track knob helped me dial that in before opening up a host of phaser sounds below noon. By going the other direction and kicking the rate switch into its higher setting, a world of ring-mod tweaking opens up. There are some uniquely warped effects in these higher settings that include dial-up modem sounds and lo-fi dial tones. Exploring the ring mod/frequency shift knob widens the possibilities further to high-pitched, filtered white noise and glitchy digital artifacts at its extremes.
There are wild, active sounds within each knob movement on the Radius, and the modulation section naturally brings those to life in more ways than a simple knob tweak ever could, delivering four LFO waveforms, a step modulator, two x-mod waveforms, and an envelope follower. It’s within these settings that I found rayguns, sirens, Shepard tones, and futuristic sounds that were even harder to describe.
It’s easy to imagine the Radius at the forefront of sonic experiments, where it would be right at home. But this pedal could easily be a studio device when applied in low doses to give a track something special that pops. The possible applications go way beyond guitars.
The Verdict
The Radius isn’t easy to plug and play, but it’s also not hard to use if you keep an open mind. That’s necessary, too: The Radius is not for guitar players who prefer to stay grounded; this pedal is for sonic-stargazers and producers.
I enjoyed pairing the Radius with various guitar instruments—12-string, baritone, bass—and it kept getting me more and more excited about sonic experimentation. That feeling is a big part of what’s special about this pedal. It’s so open-ended and controllable, continuing to reveal more of its capabilities with use. Once you feel like you’ve gotten something down, there are often more sounds to explore, whether that’s putting a new instrument or pedal next to it or exploring the Radius’ stereo, MIDI, or expression-pedal functionality. Like many great instruments, it only takes a few minutes to get started, but it could keep you exploring for years.
Red Panda Radius Ring Modulator/Frequency Shifter Pedal
Ring Modulator/Frequency ShifterHand-built in the Custom Shop with Alnico magnets and signed raw steel bottom plates, these limited-edition sets evoke the early days of blues, rock & roll, and country.
Seymour Duncan, a leading manufacturer of guitar and bass pickups, effects pedals, and pedal amps, is proud to announce Joe Bonamassa's 1950 Broadcaster Set.
In the history of electric guitars, few are as iconic as the Fender Broadcaster. As few as 250 of these instruments are believed to have been built from the fall of 1950 to the spring of 1951 before Fender transitioned the model to what we all know as the Telecaster at the end of 1951. To say Broadcasters are incredibly rare is an understatement, and to find one in pristine condition is an even greater challenge. Lucky for all of us, our friend and vintage guitar authority Joe Bonamassa had a very special one in his collection with a tone so remarkable that he wanted to share it with the world. Carefully testing and documenting the original guitar’s pickups, the Seymour Duncan team was able to faithfully recreate the sound and look of Joe’s coveted 1950 Fender Broadcaster.
The Joe Bonamassa 1950 Broadcaster pickups are a faithful replica of the set found in this guitar. Joe describes the neck pickup as bright and perfectly balanced with the punchy flat-pole bridge pickup. Authentic to Leo Fender’s original design, these pickups evoke the early days of blues, rock & roll, and country.
Built-in the Seymour Duncan Custom Shop, this set features Alnico 2 magnets in the neck, Alnico 4 magnets in the bridge, and a cloth push-back cable. The raw steel bottom plates of the first 250 sets will be signed by Joe and Seymour W Duncan and will also be aged to match the original set from Joe’s guitar. These sets will be numbered in limited-edition packaging.
After the 250 limited edition sets have sold out, Joe and the Seymour Duncan Custom Shop will offer these pickups as built-to-order models.
For more information, please visit seymourduncan.com.