Learn to land your phrases like Coltrane, Cannonball, and Dexter.
Advanced
Intermediate
• Use rhythmic "push-pull" technique to create momentum.
• Extend your lines with turnaround progressions.
• Build tension with repetitive motifs.
The solo break can often be one of the most exciting moments in a jazz recording. Allow me to set the scene: The band sets up a tune with a light intro. They play through the melody of the tune, all while ramping up in energy and building the audience's anticipation towards an unaccompanied improvisational break where the first soloist will mark their entrance and establish the mood for their first chorus. This break is a test of a soloist's ability to sustain momentum without the accompaniment of a rhythm section. A good solo break can make an audience jump out of their seats, tap their toes, or even laugh. It commands their attention.
Some of the most famous solo breaks are fiery, virtuosic displays of instrumental prowess. Take for example John Coltrane's solo break on "I Love You," from the album Lush Life (1961). Following in the footsteps of Charlie Parker's famous "A Night in Tunisia" solo break, Coltrane plays a robust and perfectly articulated 16th-note phrase that establishes an energetic start to his legendary solo on this tune. (It happens at about 1:09 in the video below.)
John Coltrane - I Love You
The break gives us a taste of Coltrane's command of harmony. The line in question (similar to Ex. 1) outlines an Fmaj7–Am7–D7 harmony. Despite there being no harmonic accompaniment, you can hear the chord changes as clear as day. This is due to the chord tones primarily being placed on strong beats. In the case of a double-time line, strong beats are both downbeats as well as upbeats (the "and" of each beat), while the other subdivisions ("e" and "a") would be weaker beats. You don't always have to place chord tones on strong beats, but if your goal is to coherently spell chord changes, it's a good thing to keep in mind!
The Art of the Solo Break Ex. 1
Pay close attention to the shape (where it goes up and down) of Coltrane's line. Try singing this line—not necessarily with exact pitches, but just try to match the general direction. This will help you internalize melodic ideas for use in your own improvisations, which will put you on the path to creating your own jaw-dropping solo breaks!
Here's a line that I composed over the same implied chord progression (Fmaj7–Amin7–D7) that takes some of my favorite shapes from the Coltrane line (Ex. 2). In this phrase, I'm also conscious of putting a healthy amount of chord tones on strong beats. To further the process of internalizing Coltrane's ideas, I put these shapes alongside things that I typically improvise. Framing new vocabulary with old vocabulary is key to getting transcribed vocabulary to come out in your playing.
The Art of the Solo Break Ex. 2
Ex. 3 is another line using some of Coltrane's shapes over a different chord progression, a IIm7–V7–I in F major:
The Art of the Solo Break Ex. 3
In addition to the melodic and harmonic qualities of a double-time solo break, the line's ending will determine how well you can keep your listeners' attention. Part of what makes Coltrane's break satisfying is that he lands in a way that assures you he's completely in control of the pulse. Not only does his phrase line up right on the first beat of the form, but he also extends his line past the break with an eighth-note triplet figure that gives music an interesting "push-pull" quality. When you're creating your solo break, be mindful of how you're landing, and how the ideas you play after the break relate to what you just played (Ex. 4).
The Art of the Solo Break Ex. 4
Ex. 5 flips the rhythmic skeleton of Coltrane's idea. Now the break is a series of eighth-note triplets, while the line after the break is mainly 16th-notes, reintroducing that "push-pull" quality.
The Art of the Solo Break Ex. 5
Now that we've seen an example of a bebop-oriented solo break, let's explore a more bluesy break that relies heavily on repetition to get a listener to bob their head and tap their toes. Ex. 6 is similar to what Cannonball Adderley plays on "One for Daddy-O" from his album Something Else (1958).
Cannonball Adderley - One for Daddy-O
This line (Ex. 6) begins with a Bb blues-based motif that you'd be likely to hear in a big band shout chorus and ends with a more bebop-oriented figure that (similarly to Coltrane's idea) outlines an implied F7–the V chord.
The Art of the Solo Break Ex. 6
Using the language of the blues in a jazz context is key to creating a musical statement linked to the tradition and rhythmic placement is key to making a blues idea speak. Cannonball's repetitive rhythmic figure not only creates tension, but it also gives a listener something to latch onto. Toward the end of Cannonball's solo break, we feel another example of the "push-pull" which comes from his use of contrasting rhythms: The muscular 16th-note-heavy phrase that begins the break is contrasted with a wispy 16th-note triplet idea that carries us into the form.
Ex. 7 uses a rhythmic skeleton like Cannonball's line. I start with a bluesy idea with a repetitive rhythm (a polyrhythmic group of five 16th-notes over 4/4 time) and break things up with a bebop-derived 16th-note triplet idea that lands squarely on beat 1 of the third measure.
The Art of the Solo Break Ex. 7
Let's take a look at our final type of solo break, which arguably is the most effective in commanding a listener's attention: the quote. Quotes are commonplace in jazz improvisation, with soloists taking something as dense as a bebop melody (or as recognizable as a nursery rhyme) and superimposing it on top of a new set of chord changes. A quote-based solo break is a surefire way to establish a playful (and sometimes humorous) mood for your first solo. The break we'll use for this example is Dexter Gordon on "Three O' Clock in the Morning" from Go (1962). Dexter Gordon is known as one of the greatest tenor saxophonists of all time, with a discography spanning bebop to post-bop, and he's also known as jazz's master of quotes.
Dexter Gordon-Three O'Clock in the Morning
In Gordon's solo break, he quotes "Westminster Quarters," which is the melody Big Ben's bells play to mark every quarter-hour (Ex. 8). This melody is also used as the intro for Gordon's version of the tune in question, as well as for Miles Davis' version of "If I Were a Bell." Gordon's quote is made even more playful by the fact that he doesn't finish the entire melody.
The Art of the Solo Break Ex. 8
Ex. 9 shows what the full quote would sound like. By leaving the melody unfinished, Gordon creates tension that is unresolved, which is a great way to leave your listener on edge. Throughout the course of his masterful solo, Gordon quotes "Take Me Out to the Ballgame," "Poinciana," and "Three Blind Mice," proving that there is no end to his bank of melodies.
The Art of the Solo Break Ex. 9
Ex. 10 uses "Jingle Bells" over "Rhythm" changes, just to show how you can really make anything work if there's enough conviction. There isn't really a recommended list of quotable tunes, it just depends on how well known the given melody is. I've heard soloists quote everything from "Careless Whisper" on a minor blues to "Pop Goes the Weasel" on "Giant Steps," the possibilities are endless!
The Art of the Solo Break Ex. 10
Now that you're familiar with three different types of solo breaks, try composing a couple of your own original breaks on a tune you're familiar with. Keep in mind the melodic, harmonic, and rhythmic characteristics of Coltrane, Adderley, and Gordon's breaks. Once you're able to hear bits and pieces of their vocabulary alongside your own, try your hand at improvising some breaks. You'll be sure to get a reaction out of your listeners!
- Jazz Chops: Arpeggio Blowout - Premier Guitar ›
- Django's Gypsy-Jazz Secrets - Premier Guitar ›
- Jazz Boot Camp: 6 Essential Solo Guitar Tricks - Premier Guitar ›
Another day, another pedal! Enter Stompboxtober Day 7 for your chance to win today’s pedal from Effects Bakery!
Effects Bakery MECHA-PAN BAKERY Series MECHA-BAGEL OVERDRIVE
Konnichiwa, guitar lovers! 🎸✨
Are you ready to add some sweetness to your pedalboard? Let’s dive into the adorable world of the Effects Bakery Mecha-Pan Overdrive, part of the super kawaii Mecha-Pan Bakery Series!
🍩 Sweet Treats for Your Ears! 🍩
The Mecha-Pan Overdrive is like a delicious bagel for your guitar tone, but it’s been upgraded to a new level of cuteness and functionality!
Effects Bakery has taken their popular Bagel OverDrive and given it a magical makeover. Imagine your favorite overdrive sound but with more elegance and warmth – it’s like hugging a fluffy cat while playing your guitar!
A twist on the hard-to-find Ibanez MT10 that captures the low-gain responsiveness of the original and adds a dollop of more aggressive sounds too.
Excellent alternative to pricey, hard-to-find, vintage Mostortions. Flexible EQ. Great headroom. Silky low-gain sounds.
None.
$199
Wampler Mofetta
wamplerpedals.com
Wampler’s new Mofetta is a riff on Ibanez’s MT10 Mostortion, a long-ago discontinued pedal that’s now an in-demand cult classic. If you look at online listings for the MT10, you’ll see that asking prices have climbed up to $1k in extreme cases.
It would have been easy for Wampler to simply make a Mostortion clone and call it a day, but they added some unique twists to the Mofetta pedal. While the original Mostortion had a MOSFET-based op amp, it actually used clipping diodes to create its overdrive. The Mofetta is a fairly accurate replica and includes that circuitry, but also has a toggle switch for texture, which lets you choose between the original-style diode-based clipping in the down position and multi-cascaded MOSFET gain stages in the up position.
Luscious Low Gain and Meaty Mid-Gain
The Mofetta’s control panel is very straightforward and conventional with knobs for bass, mids, treble, level, and gain. The original Mostortion was revered for its low-gain tone and is now popular among Nashville session guitarists. Wampler’s tribute captures that edge-of-breakup vibe perfectly. I enjoyed using the pedal with the gain on the lower side, around 9 o’clock, where I heard and felt slight compression that gave single notes a smooth and silky feel. I particularly enjoyed the tone-thickening the Mofetta lent to my Ernie Ball Music Man Axis Sport’s split-coil sound as I played pop melodies and rootsy, triadic rhythm guitar figures. The Mofetta has expansive headroom, and as a result there’s a lot of space in which you can find really bold, cutting tones without muddying the waters too much. Even turning the gain all the way off yields a pleasing volume bump that would work well in a clean boost setting.
There’s a lot of space in which you can find really bold, cutting tones without muddying the waters too much.
Switching the texture switch up engages the MOSFET section, introducing cascading gain stages that elevate the heat and add flavor the original Mostortion didn’t really offer. Classic rock and early metal are readily available via the MOSFET setting. If you need to stretch out to modern metal sounds, the Mofetta probably isn’t the pedal for you. Again, the original Mostortion was, first and foremost, a low-to-mid-gain affair, so unless you’re using it as a boost with a high-gain amp, the Mofetta is not really a vehicle for extreme sounds.
One of the Mofetta’s real treats is its responsiveness. Even at higher gain settings the Mofetta is very touch sensitive. You can tap into a wide range of dynamic shading just by varying the strength of your pick attack. I enjoyed playing fast, ascending scalar passages, picking with a medium attack then really slamming it hard when I hit a high climactic note, to get the guitar to really scream.
The Verdict
Wampler is a reliably great builder who creates pedals with a purpose. I own two of his pedals, the Dual Fusion and the Pinnacle, and both are really exceptional units. The Mofetta captures the essence of the Mostortion and makes it available at an accessible price. But even if you’ve never heard or played an original Mostortion, you’ll appreciate the truly versatile EQ, touch sensitivity, and the bonus texture switch, which expands the Mofetta’s range into more aggressive spaces. The wealth of dirt boxes on the market today can make a player jaded. But Wampler pushed into a relatively unique, satisfying, and interesting place with the Mofetta.
Although inspired by the classic Fuzz Face, this stomp brings more to the hair-growth game with wide-ranging bias and low-cut controls.
One-ups the Fuzz Face in tonal versatility and pure, sustained filth, with the ability to preserve most of the natural sonic thumbprint of your guitar or take your tone to lower, delightfully nasty places.
Pushing the bias hard can create compromising note decay. Difficult to control at extreme settings.
$144
Catalinbread StarCrash
catalinbread.com
Filthy, saturated fuzz is a glorious thing, whether it’s the writ-large solos of Big Brother and the Holding Company’s live “Ball and Chain,” the soaring feedback and pure crush of Jimi Hendrix’s “Foxy Lady,” or the sandblasted rhythm textures of Queens of the Stone Age’s “Paper Machete.” It’s also a Wayback Machine. Step on a fuzz pedal and your tone is transported to the ’60s or early ’70s, which, when it comes to classic guitar sounds, is not a bad place to be.
Catalinbread’s StarCrash is from their new ’70s collection, so the company is laying its Six Million Dollar Man trading cards on the table—upping the ante on traditional fuzz with more controls and, according to the company’s website, a little more volume than the average fuzz pedal, while still staying in the traditional Fuzz Face lane.
The Howler’s Viscera
Arbiter Electronics made the first Fuzz Face in 1966. The StarCrash is inspired by that 2-transistor pedal, but benefits from evolution, as did almost all fuzz pedals in the ’70s, when the standard shifted from germanium to silicon circuitry to improve the consistency of the effect’s performance. The downside is that germanium is gnarlier to some ears, and silicon transistors don’t respond as well to adjustments made via a guitar’s volume control.
While Fuzz Faces have only two knobs, volume and fuzz, the silicon StarCrash has three: volume, bias, and low-cut. Catalinbread’s website explains: “We got rid of that goofy fuzz knob. We know that 95 percent of all players run it dimed, and the remaining 5 percent use their guitar’s volume knob to rein it in.”
I suspect there are plenty of players who, like me, do adjust the fuzz control on their pedals, but the most important thing is that the core fuzz sound here is excellent—bristly and snarling, with a far girthier tone than my reissue Fuzz Face. It’s also, with the bias and low-cut controls, far more flexible. The low-cut control allows you to range from a traditional, comparatively thinner Fuzz Face sound (past noon and further) to the StarCrash’s authentic, beefier voice (noon and lower). Essentially, it cuts bass frequencies from 40 Hz to 500 Hz, resulting in an aural menu that runs from lush and lowdown to buzzy and slicing. And the bias control is a direct route to the spitty, fragmented, so-called Velcro-sound that’s become a staple of the stoner-rock/Jack White school of tone. The company calls this dial a “dying battery simulator,” and it starves the second transistor to achieve that effect.
Sweet Song of the Tribbles
Playing with the StarCrash is a lot of fun. I ran it through a pair of Carr amps in stereo, adding some delay and reverb to mood, and used a variety of single-coil- and humbucker-outfitted guitars. While both pickup types interacted well with the pedal, the humbuckers were most pleasing to my ears with the bias cranked to about 2 o’clock or higher, since the ’buckers higher output allowed me to let notes sustain longer before sputtering out. Keeping the low-cut filter at 9 o’clock or lower also helped sustain and depth in the Velcro-fuzz zone, while letting more of the instruments’ natural voices come through, of course.
With the low-cut filter turned up full and the bias at 10 o’clock, I got the StarCrash to be the perfect doppelganger of my Hendrix reissue Fuzz Face. But that’s such a small part of the pedal’s overall tone profile. It was more fun to roll off just a bit of bass and set the bias knob to about 2 or 3 o’clock. Around these settings, the sound is huge and grinding, and yet barre chords hold their character while playing rhythm, and single-note runs, especially on the low strings, are a filthy delight, with just the right schmear of buttery sustain plus a hint of decay lurking behind every note. It’s such a ripe tone—the sonic equivalent of a delicious, stinky cheese—that I could hang with it all day.
Regarding Catalinbread’s claims about the volume control? Yes, it gets very loud without losing the essence of the notes or chords you’re playing, or the character of the fuzz, which is a distinct advantage when you’re in a band and need to stand out. And it’s a tad louder than my Fuzz Face but doesn’t really bark up to the level of most Tone Bender or Buzzaround clones I’ve heard. In my experience, these germanium-chipped critters of similar vintage can practically slam you through the wall when their volume levels are cranked.
The Verdict
Catalinbread’s StarCrash—with its sturdy enclosure, smooth on/off switch and easy-to-manipulate dials—can compete with any Fuzz Face variant in both price and performance, scoring high points on the latter count. The bias and low-cut dials provide access to a wider-than-usual variety of fuzz tones, and are especially delightful for long, playful solos dappled with gristle, flutter, and sustain. Kudos to Catalinbread for making this pedal not just a reflection of the past, but an improvement on it.
Catalinbread Starcrash 70 Fuzz Pedal - Starcrash 70 Collection
StarCrash 70 Fuzz PedalIntrepid knob-tweakers can blend between ring mod and frequency shifting and shoot for the stars.
Unique, bold, and daring sounds great for guitarists and producers. For how complex it is, it’s easy to find your way around.
Players who don’t have the time to invest might find the scope of this pedal intimidating.
$349
Red Panda Radius
redpandalab.com
The release of a newRed Panda pedal is something to be celebrated. Each of the company’s devices lets us crack into our signal chains and tweak its inner properties in unique, forward-thinking ways, encouraging us to be daring, create something new, and think about sound differently. In essence, they take us to the sonic frontier, where the most intrepid among us seek thrills.
Last January, I got my first glimpse of the Radius at NAMM and knew that Red Panda mastermind Curt Malouin had, once again, concocted something fresh. The pedal offers ring modulation and frequency shifting with pitch tracking and an LFO, and I heard classic ring-mod tones as the jumping off point for oodles of bold sounds generated by envelope and waveform-controlled modulation and interaction. I had to get my hands on one.
Enjoy the Process
I’ve heard some musicians talk about how the functionality of Red Panda’s pedals are deep to a point that they can be hard to follow. If that’s the case, it’s by design, simply because each Red Panda device opens access to an untrodden path. As such, it can feel heady to get into the details of the Radius, which blends between ring modulation and frequency shifting, offering control of the balance and shift ratios of the upper and lower sidebands to create effects including phasing, tremolo, and far less-natural sounds.
As complex as that all might seem, Red Panda’s pedals always make it easy to strip the controls down to their most essential form. The firmest ground for a guitarist to stand with the Radius is a simple ring-mod sound. To get that, I selected the ring mod function, turned off the modulation section by zeroing the rate and amount knobs, kept the shift switch off and the range switch on its lowest setting. With the mix at noon and the frequency knob cranked, I found my sound.
From there, by lowering the frequency range, the Radius will yield percussive tremolo tones, and the track knob helped me dial that in before opening up a host of phaser sounds below noon. By going the other direction and kicking the rate switch into its higher setting, a world of ring-mod tweaking opens up. There are some uniquely warped effects in these higher settings that include dial-up modem sounds and lo-fi dial tones. Exploring the ring mod/frequency shift knob widens the possibilities further to high-pitched, filtered white noise and glitchy digital artifacts at its extremes.
There are wild, active sounds within each knob movement on the Radius, and the modulation section naturally brings those to life in more ways than a simple knob tweak ever could, delivering four LFO waveforms, a step modulator, two x-mod waveforms, and an envelope follower. It’s within these settings that I found rayguns, sirens, Shepard tones, and futuristic sounds that were even harder to describe.
It’s easy to imagine the Radius at the forefront of sonic experiments, where it would be right at home. But this pedal could easily be a studio device when applied in low doses to give a track something special that pops. The possible applications go way beyond guitars.
The Verdict
The Radius isn’t easy to plug and play, but it’s also not hard to use if you keep an open mind. That’s necessary, too: The Radius is not for guitar players who prefer to stay grounded; this pedal is for sonic-stargazers and producers.
I enjoyed pairing the Radius with various guitar instruments—12-string, baritone, bass—and it kept getting me more and more excited about sonic experimentation. That feeling is a big part of what’s special about this pedal. It’s so open-ended and controllable, continuing to reveal more of its capabilities with use. Once you feel like you’ve gotten something down, there are often more sounds to explore, whether that’s putting a new instrument or pedal next to it or exploring the Radius’ stereo, MIDI, or expression-pedal functionality. Like many great instruments, it only takes a few minutes to get started, but it could keep you exploring for years.