![Foo Fighters’ Chris Shiflett Rig Rundown [2024]](https://www.premierguitar.com/media-library/youtube.jpg?id=53453295&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
The Foos’ guitarist and intrepid Shred With Shifty host opens the guitar garage for his current tour and details his brand-new pedal setup.
The last time PGcaught up with Chris Shiflett, Chris Kies paid a visit to Foo Fighters headquarters at Studio 606. This time, he meets Shiflett in Cincinnati, onstage at Great American Ballpark ahead of the Foos’ July 25 headlining date at the stadium. It was a hot one out there, but that didn’t stop our jeans-wearing Kies and towel-drying Shifty from tackling the guitarist’s new and improved 2024 tour rig. You’ll see some familiar faces, but some new ones too, including a sharp ’80s shredder and a pink partscaster. The biggest change of all comes in the form of a Dave Friedman-designed pedalboard, an impressive rackmount setup with a massive RJM switcher to hit all the set pieces. Plus, Shifty gives some juicy teasers on future signature gear collabs and talks about how hosting Shred With Shifty has impacted his own playing.
Brought to you by D’Addario.
Leave It to Clever
The beloved high-end version of Shifty’s signature Fender Telecaster Deluxe is equipped with Lindy Fralin P-90s, a rosewood fretboard, and Shifty’s Arsenal pin on the strap—haters be damned.
Eat the Rich
Shifty was on tour in Washington, D.C., when PG’s Jason Shadrick sent him the Reverb listing for this 1983 B.C. Rich Mockingbird. As luck would have it, the ’bird was just north in Maryland, and the seller agreed to drive the axe down and deliver it in person. Shifty swapped in some Dimarzio Super Distortion pickups, but the wiring was a bit screwy, so the kind folks at B.C. Rich reached out and arranged to fix things up. This one has D’Addario .010–.046 strings.
Pink Partscaster
This simple, eye-catching partscaster is an homage to Shifty’s favorite players from the ’80s, chief among them Eddie Van Halen. It has a single Seymour Duncan SH-4 JB Model humbucker, a Floyd Rose tremolo system, and a lone volume knob. The online-ordered headstock has Shiflett’s name on it, just so no one takes it by accident. Eric Chaz at Eric’s Guitar Shop in Van Nuys, California, assembled this pink plucker for Shiflett.
Shifty’s still using this one to workshop pieces of Van Halen’s tapping work on “Eruption,” and the haters can eat their hearts out, because perfect imitation isn’t the goal. “If it’s loud and you do it with some measure of confidence, it kind of works,” he says.
Kickass Korina
This Skynyrd-style Gibson Explorer has been hot rodded with a Seymour Duncan ’59 humbucker and another Duncan SH-4 JB Model.
Original Recipe
This is the original Fender Chris Shiflett Telecaster Deluxe, the guitarist’s first signature model which was designed and priced for accessibility to all players. This one got upgraded with a prized Tom Holmes humbucker. Stay tuned: Shifty teases that a new, American-made Shiflett signature might be coming by end of year….
Sticker Magnet
Shifty picked up this Gibson ES-335 around the tour cycle for One by One, and he’s since decorated it with a few stickers. This one’s got his classic Seymour Duncan ’59/JB humbucker combo, and stays in drop-D tuning for songs like “Monkey Wrench” and “Everlong.”
Fabulous '57
This is Shiflett’s “most vintage-y” vintage guitar: a 1957 Gibson Les Paul. He initially planned to reserve it for studio use, but fellow Foo guitarist Pat Smear convinced him to bring it out on the road. It started out as a goldtop, but now sports a finish that shows the wood and three-piece construction. It’s still loaded with the original pickups.
Stack City
Shiflett runs a beastly quartet of half-stacks, with two Friedman BE-100 heads and two Vox AC30 heads, all accompanied by matching 4x12 cabs. Shifty keeps the Friedmans in 50-watt mode, but look out—there could be a custom Shiflett Friedman amp coming down the line.
Death of the Tap Dance
Shiflett finally got tired of tap dancing around his pedalboard, and called up Dave Friedman for some help prepping a tour-ready rig. “He said, ‘Oh, so you decided to finally get a big boy rig?’” Shiflett laughs. Friedman designed it around an RJM Mastermind GT/22, with all of Shifty’s pedals housed in a rack sidestage. It took some getting used to, but now Shiflett’s built up the muscle memory to navigate the system. For adding new sounds, he’ll text his tech, Mark Lubetski, which settings or sounds he wants for certain “scenes,” and Mark will program them in.
Pedal Playpen
Shiflett’s pedal setup takes up two shelves in this side-stage rack. On the lower shelf, there are two Strymon Decos and two Strymon Timelines—one of each assigned to either the Voxes or the Friedmans—plus an Electro-Harmonix Micro POG, a Boss CE-2w, a Suhr microMIDI Control, and a Friedman Power Grid 10.
On the upper shelf, Shifty keeps the fun stuff: a JHS Muffuletta, Xotic EP Booster, Origin Effects Cali76, Fulltone WahFull, Klon KTR, Andy Green Pedals Seaverb, MXR EVH Phase 90, and MXR Flanger.
Shop Chris Shiflett's Foo Fighters Rig
Gibson Explorer
D’Addario .010–.046
Seymour Duncan SH-4 JB Model Humbucker
Seymour Duncan ’59 Humbucker
Gibson ES-335
1957 Gibson Les Paul
Friedman BE-100
Vox AC30
Strymon Deco
Strymon TimeLine
Electro-Harmonix Micro POG
Boss CE-2w
Suhr microMIDI Control
Friedman Power Grid 10
JHS Muffuletta
Xotic EP Booster
Origin Effects Cali76
Fulltone WahFull
MXR EVH Phase 90
MXR Flanger
- Rock and Grohl: A Foo Fighters Primer ›
- Alex Lifeson Breaks Down The Haunting, Legendary Solo On Rush’s “Limelight” ›
- Chris Shiflett is Over the “Shame of the ’80s” ›
- Chris Shiflett on His First "Real" Guitar ›
The Enigmatic nails the flexibility, for sure. To my ears, its tone foundation lives somewhere on a sliver of Venn diagram where a black-panel Fender and a 50-watt Hiwatt intersect. It’s alive, dimensional, snappy, sparkly, massive, and, at the right EQ settings, hot and excitable. But the Enigmatic’s powerful EQ and gain controls, multiple virtual cab and mic pairings, rock, jazz, and custom voices, plus additional deep, bright, and presence controls enable you to travel many leagues from that fundamental tone. The customization work you can do in the app enables significant changes in the Enigmatic’s tone profile and responsiveness, too. All these observations are made tracking the Enigmatic straight to a DAW—making the breadth of its personality even more impressive. But the Enigmatic sounds every bit as lively at the front end of an amp, and black-panel Fenders are a primo pairing for its saturation and sparkly attributes. The Enigmatic is nearly $400, which is an investment. But considering the ground I covered in just a few days with it, and the quality and variety of sounds I could conjure with the unit just sitting on my desk, the performance-to-price ratio struck me as very favorable indeed.
This month’s mod Dan’s uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel.
Don’t let the name fool you, this is a purely passive device—nothing is going to be boosted. In general, you can’t increase anything with passive electronics that isn’t already there. Period. But you can reshape the tone by deemphasizing certain frequencies and making others more prominent (so … “boost” in guitar marketing language). Removing highs makes lows more apparent, and vice versa. In addition, the use of inductors (which create the magnetic field in a guitar circuit) and capacitors will create resonant peaks and valleys (bandpasses and notches), further coloring the overall tone. This type of bandpass filter only allows certain frequencies to pass through, while others are blocked, and it all works at unity gain.
“You can’t increase anything with passive electronics that isn’t already there … but you can reshape the tone by deemphasizing certain frequencies and making others more prominent.”
All the systems I mentioned above are doing more or less the same thing, using different approaches and slightly different component values. They are all meant to be updated tone controls. Our common tone circuit is usually a variable low-pass filter (aka treble-cut filter), which only allows the low frequencies to pass through, while the high frequencies get sent to ground via the tone cap. Most of these systems are LCR networks, which means that there is not only a capacitor (C), like on our standard tone controls, but also an inductor (L) and a resistor (R).
In general, all these systems are meant to control the midrange in order to scoop the mids, creating a mid-cut. This can be a cool sounding option, e.g. on a Strat for that mid-scooped neck and middle tone.
Dan Torres offered his “midrange kit” via an internet shop that is no longer online, same with his business website. The Torres design is a typical LCR network and looks like the illustration at the top of this column.
Dan’s design uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel. Let’s break down the parts piece by piece:
Any 500k linear pot will do the trick, in one of the rare scenarios where a linear pot works better in a passive guitar system than an audio pot.
(C) 0.039µF cap: This is kind of an odd value. Keeping production tolerances of up to 20 percent in mind, any value that is close will do, so you can use any small cap you want for this. I would prefer a small metallized film cap, and any voltage rating will do. If you want to stay as close as possible to the original design, use any 0.039 µF low-tolerance film cap.
(L) 1.5H inductor: The original design uses a Xicon 42TL021 inductor, which is easy to find and fairly priced. This one is also used in the Bill Lawrence Q-Filter design, the Gibson standard Varitone, and many other systems like this. It’s very small, so it will fit in virtually every electronic compartment of a guitar. It has a frequency range of 300 Hz up to 3.4 kHz, with a primary impedance of 4k ohms (that’s the one we want to use) and a secondary impedance of 600 ohms. Snip off the three secondary leads and the center tap of the primary side and use the two remaining outer primary leads; the primary side is marked with a “P.” On the pic, you can see the two leads you need marked in red, all other leads can be snipped off. You can connect the two remaining leads to the pot either way; it doesn’t matter which of them is going to ground when using it this way.
Drawing courtesy of singlecoil.com
(R) 220k: use a small axial metal film resistor (0.25 W), which is easy to find and is the quasi-standard.
Other designs use slightly different part values—the Bill Lawrence Q-filter has a 1.8H L, 0.02 µF C and 8k R, while the old RA Gresco Tone Qube from the ’80s has a 1.5H L, 0.0033 µF C, and a 180k R, so this is a wide field for experimentation to tweak it for your personal tone.
This mid-cut system can be put into any electric guitar not only as a master tone, but also together with a regular tone control or something like the Fender Greasebucket, or it can be assigned only to a certain pickup. It can be a great way to enhance your sonic palette, so give it a try.
That’s it! Next month, we’ll take a deeper look into how to fight feedback on a Telecaster. It’s a common issue, so stay tuned!
Until then ... keep on modding!