Djentlemen Jake Bowen, Mark Holcomb, and Misha Mansoor show off their cavalcade of signature gear from Ibanez, PRS, Jackson, Seymour Duncan, DiMarzio, Bare Knuckle, and Peavey—and then explain how digital modelers continue shaping and shifting their sound.
Our third Rig Rundown with Periphery’s Jake Bowen, Mark Holcomb, and Misha Mansoor—at Nashville’s Marathon Music Works on April 2—caught the band on their final tour stop for a spring run in support of the brand-spankin’-new Periphery V: Djent Is Not a Genre. Our time with the triumvirate of tone reminded us that these fellas never rest their ears. They know gear and how to make it work for them. That’s why each of them has spent extensive time in several R&D collaborations with some of the biggest, most influential companies in guitardom. This time Bowen, Holcomb, and Mansoor all dish on the evolutions of their signature gear and how everything meshes and molds together for the greater, Transformer-like machine that is Periphery. Whether it’s going up to 27 frets, utilizing Alnico 8 magnets, or adding an Evertune bridge to compensate for deeply dropped tunings, this trio of tone hounds will sniff it out. Let’s dig in!
Brought to you by D’Addario XPND Pedalboard.
Final Fantasy 27
Jake Bowen busted out this blue belle first because it’s his most-recent signature—an Ibanez JBM9999 that features a basswood body in their RGA shape, a 5-piece maple-walnut neck, a bound-ebony fretboard, a 25.5" scale that crams in 27 frets, Gotoh MG-T locking tuners, and Ibanez’s Gibraltar Elite bridge, plus it comes loaded with a fresh set of Bowen’s latest signature DiMarzio Mirage humbuckers. The neck model is a custom-voiced, Strat-style, single-coil-sized humbucker that incorporates some finessed tones via the 5-way. Position one and five are standard and individually engage the bridge and neck humbuckers (respectively). Position four puts the neck humbucker into parallel mode. The center slot gets both humbuckers involved, while position two selects the bridge side of the neck humbucker and the neck side of the bridge humbucker. The reason Jake opted for the single-coil-sized humbucker was to inspire fans who want to swap in their favorite single-coil pickups without any extra routing.
Ibanez is known for their wild combinations of letters and numbers for product cataloging, but the 9999s have a significance to Bowen … beyond sounding like an injury law firm’s phone number. He’s a superfan of the Final Fantasy world and 9999 is the max damage you can get in the earlier games, so Bowen requested that gamer Easter egg and they obliged. All his 6-string signatures take Horizon Devices Progressive Tension Heavy 6 strings (.010–.014–.019–.030–.042–.058).
Back in Black
Bowen commissioned this sleek JBM9999 from Ibanez’s L.A. Custom Shop. It matches all the previous model’s accoutrements but shakes it up by including an Evertune bridge. That appointment means it comfortably rides in G–G–C–F–A–D tuning and sees the stage for “Reptile” and “Zagreus.”
The Mojo Machine
This JBM9999 has a few different wrinkles than the previous two. It has a roasted-maple neck and fretboard, and while the single-coil-sized neck humbucker looks like another Mirage model, it’s actually DiMarzio’s The Chopper. That pickup worked as a starting point when Bowen was testing out their rail hum-canceling Strat pickups, and that ultimately led him to the voicing of his signature Mirage version.
Knight in White Satin
Lastly, here’s Jake’s signature Ibanez JBM100 7-string, stocked with his original signature DiMarzio Titan ’buckers, that was shown off in the 2017 Rundown. His first standard sig model was generally done in a matte black finish, but he wanted something special and felt the gold pickup covers would really pop with a white finish. The JBM100s have a mahogany body/maple top configuration.
A $200 Private Stock PRS?!
Back in 2016, Mark Holcomb ordered this 7-string custom from PRS’ Private Stock team. It’s based on his 2015 signature model, but with all of Paul Reed Smith’s bells and whistles. A few things make this guitar unique to PRS’ signature artist roster in that it has a 26.5" scale length, a flat 20" radius on the fretboard, and Holcomb’s first signature Seymour Duncan Alpha & Omega humbuckers.
When it was built, PRS sent the special instrument via FedEx (signature required), and it was left by the delivery person without Holcomb’s John Hancock outside his Austin, Texas home. It was swiped by a porch pirate and assumed to be gone forever. Mark rallied his online followers to get the word out and a fan recognized it in a flea market 60 miles south of Austin. The kicker: It was being sold for $200! The fan bought the guitar and returned it to Mark. The best part, Holcomb didn’t let the sloppy bandit deter him from touring with it as he uses it on “Ragnarok” and other low-tuned riffers. He laces all his 7-strings with Progressive Tension Heavy 7 (.010–.014–.018–.028–.039–.050–.065).
Holcomb Burst
For any Periphery songs that only require a standard 6-string attack, he shoulders his brand-new 2023 PRS SE Mark Holcomb that is off-the-shelf stock. Ingredients include a mahogany body topped with a quilted maple top that incorporates an elegant violin carve, a satin maple neck with 24 frets, an ebony fretboard with a flat 20" radius, a 25.5" scale length, and this one leaves the factory with Holcomb’s just-released Seymour Duncan Scarlet & Scourge humbuckers. Controls are just a 3-way pickup selector, master volume, and push/pull tone knob for coil splitting. Holcomb puts Horizon Devices Progressive Tension Heavy 6 strings on all standard guitars.
7th Heaven
This is Holcomb’s PRS SE SVN signature that is identical to its little brother, but has the added string and a 26.5" scale.
Evertune Eviscerater
For the set opener “Reptile,” Holcomb enlists this PRS SE SVN signature that was modded with an Evertune bridge to accommodate “the stupid-low G tuning” that Mark stumbled upon while riffing away on vacation in Spain.
Reptilian Rocker
For the band’s rumbling G–G–C–F–A–D tuning, Misha Mansoor grabs this Jackson USA Misha Mansoor Signature Juggernaut HT6. Its DNA starts with a caramelized basswood body, caramelized quartersawn maple neck and fretboard, 24 jumbo stainless-steel frets, a Graph Tech TUSQ XL nut, a 25.5" scale, Hipshot open-gear locking tuners, and Misha’s signature Bare Knuckle Ragnarok humbuckers. He puts Horizon Devices Progressive Tension Heavy 6 strings on it. And it has a retro-fitted Evertune to keep things tight, prompting Mansoor to commented that “this tour is the most in-tune ‘Reptile’ has ever sounded. It’s been wonderful.” He notes that he recorded nearly all his parts for Periphery’s last two albums with this silver siren.
Orange You Glad
A few years back, Mansoor listed a bunch of gear on Reverb during an equipment purge. He almost listed this one but had second thoughts and is very glad he didn’t. His tech Vinnie gave it some serious TLC and it’s back in the rotation. A cool tidbit about this first-generation Jackson USA Misha Mansoor Signature Juggernaut HT7 is that it has a stunning quilted maple cap sitting over a roasted basswood body. There was a slight blemish on its top, so to salvage the build Misha suggested painting over the quilt, but leaving the edges exposed for a quilted binding effect. It sees work for “Ragnarok,” in their unique variation of drop-A-flat tuning (F#–D#–G#–C#–F#–A#–D#).
Snobs Need Not Apply
Another staple for Mansoor during Periphery’s live set is this import Jackson Pro Series Signature Misha Mansoor Juggernaut HT7 in shimmery blue sky burst. Many of the same appointments are here: a basswood body and a caramelized maple neck and fretboard. The stock models roar with a set of Jackson MM1 humbuckers, but Mansoor opted to upgrade with a set of Bare Knuckle Ragnaroks.
Easy Peasy
“This thing just shreds, man. It’s just so easy to play and it doesn’t fight me for the little note-y bits in ‘Marigold.’” The set closer puts this matte Jackson USA Misha Mansoor Signature Juggernaut HT6 into drop-C tuning. Mansoor is a mega car enthusiast and Formula 1 fan, so he had Jackson put this one in matte red to match Ferrari finishes.
Pass the Scalpel, Please
This might look yet another Jackson USA Misha Mansoor Signature Juggernaut HT6 with a basswood core and quilted maple top, but it has a mahogany body and flame maple cap for a darker sound and heftier weight. Misha’s signature Bare Knuckle Juggernauts give this baby a bite. Mansoor says the Ragnaroks are a sledgehammer, whereas the Juggernauts are a precision tool.
All in the Family
Misha and Jake have nearly identical setups and patches when it comes to amps and effects. Both are using Peavey Invective120 heads—a design alliance with Mansoor—that each run their own Fractal Audio Axe-Fx II XL+ units through a Peavey Invective 412 and out to FOH. The cabinets are loaded with two pairs of Celestion speakers: Vintage 30s and Creambacks. Mark uses a Fractal Audio Axe-Fx II XL+, but his is juiced by a Seymour Duncan PowerStage 700. He also has a Peavey Invective 412 cabinet onstage. In addition to live stage audio via 4x12s, each guitarist relies on Sennheiser EW IEM G4 Wireless In-Ear Monitor and side fills for a complete sound. And the three amigos plug their shred sticks into Shure ULXD4Q Wireless Units.
- Haunted Shores’ Misha Mansoor and Mark Holcomb ›
- PRS Guitars Unveils SE Signature Model with Periphery’s Mark Holcomb ›
- Jackson Releases Misha Mansoor Signature Juggernaut Guitars ›
- Prog-Metal Pioneers Periphery Raise the Bar for Djent - Premier Guitar ›
The two pedals mark the debut of the company’s new Street Series, aimed at bringing boutique tone to the gigging musician at affordable prices.
The Phat Machine
The Phat Machine is designed to deliver the tone and responsiveness of a vintage germanium fuzz with improved temperature stability with no weird powering issues. Loaded with both a germanium and a silicon transistor, the Phat Machine offers the warmth and cleanup of a germanium fuzz but with the bite of a silicon pedal. It utilizes classic Volume and Fuzz control knobs, as well as a four-position Thickness control to dial-in any guitar and amp combo. Also included is a Bias trim pot and a Kill switch that allows battery lovers to shut off the battery without pulling the input cord.
Silk Worm Deluxe Overdrive
The Silk Worm Deluxe -- along with its standard Volume/Gain/Tone controls -- has a Bottom trim pot to dial in "just the right amount of thud with no mud at all: it’s felt more than heard." It also offers a Studio/Stage diode switch that allows you to select three levels of compression.
Both pedals offer the following features:
- 9-volt operation via standard DC external supply or internal battery compartment
- True bypass switching with LED indicator
- Pedalboard-friendly top mount jacks
- Rugged, tour-ready construction and super durable powder coated finish
- Made in the USA
Static Effectors’ Street Series pedals carry a street price of $149 each. They are available at select retailers and can also be purchased directly from the Static Effectors online store at www.staticeffectors.com.
Computerized processes have given repair techs the power to deliver you a better-playing guitar. But how do they work?
When we need to get our guitars fixed by a professional, a few nagging questions run through our heads: Will the repair specialist be thorough? Will their procedures ensure an optimal sounding and easy-to-play instrument, or will they merely perform cursory work to make the guitar somewhat playable without resolving underlying issues? Have they followed the tested advancements in understanding, tools, and techniques, or are they stuck in the ideas of the ’70s?
Presently, many certified guitar-repair specialists possess the expertise required to deliver an instrument that both sounds and plays wonderfully. The standards set by manufacturers and distributors have significantly risen, safeguarded by rigorous quality protocols to guarantee the best possible acoustic experience for customers. Additionally, lutherie training has raised the bar for critical processes, and one of the most tricky is fretwork.
Traditional fretwork once involved manual labor, with technicians utilizing sandbags or similar supports to steady the neck as they straightened it with a truss rod during the filing process. A notable advancement in this field came in the mid 1970s when Don Teeter, an author and repair expert, imposed a new method: fixing the guitar body to the bench and using blocks to maintain the neck in a playing position. This refinement was one of many in the continued quest to produce superior instruments by standardized methods.
An example of the Plek’s readings from an acoustic guitar.
Photo courtesy of Galloup Guitars
In the late 1970s, another pivotal innovation was introduced by Dan Erlewine. He created an advanced fret jig with a specialized body-holding system and neck supports, adding another layer of precision to the repair process. During my collaboration with Dan in 1985, we developed a rotating neck jig that counterbalanced the forces of gravity, keeping the instrument in its playing orientation while adjusting the neck supports. This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry. By 1986, our approach had evolved into a freestanding workstation coupled with a sophisticated hold-down mechanism and enhanced neck supports, culminating in increased accuracy, efficiency, and consistency. Over the decades, the Erlewine/Galloup rotating neck jig has become a benchmark in numerous shops, enhancing fretwork performance.
"This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry."
By the 1990s, automated and computerized technologies permeated the guitar manufacturing and repair sectors. Initially applied by import companies in the mass production of guitars, the technology, although expediting processes, did not immediately achieve high execution standards. However, the tech dramatically improved over time, with computer-driven systems eventually transforming the industry. Contemporary automated production utilizing such advancements meets exceedingly high standards of precision. Some bespoke guitar manufacturers, such as Steve Andersen, were pioneers in adopting these methods, but it was companies like Taylor that established them in the modern era.
Inevitably, the progression of technology extended beyond the mere production of parts. Around 1995, German engineer Gerd Anke envisioned the integration of computer-assisted technology into enhancing instrument playability, giving rise to Plek technology, which uses computers to precisely measure and analyze the various components of a guitar, like neck relief, fret height, nut and bridge specs, and more. Nashville guitar-repair tech Joe Glaser was among the first to recognize the machine’s value, followed by San Francisco luthier Gary Brawer. When Heritage Guitar Inc. invested in a Plek machine, the guitar industry could no longer disregard the significance of this innovation.
“The machine’s scanning data confirmed that there was one nature of an ideal fret plane, done by hand or machine, and unsurprisingly, it conformed exactly to what physics predicts, not personal mojo.”
In the spring of 2022, Galloup Guitars obtained its first Plek machine. Promptly, our technician Adam Winarski paved the way for the Plek’s integration in our shop. Now, it’s a rarity for an instrument to leave our shop without having undergone Plek analysis and machining. Impressed by the results of our integration, we created “Intro to Plek” as a course for all students enrolled at the Galloup School of Lutherie, offering our students a practical introduction to this technology. We furthered this educational initiative with a comprehensive one-week intensive “Plek Certification Training Course” for both students and the public. This advanced Plek course serves those seeking to boost their knowledge base and employability in this high-precision field.
Plek is rapidly becoming an industry standard for major manufacturers and smaller shops alike. However, this does not mean that those without access to this technology cannot execute proficient fretwork. Personally, I continue to use my Erlewine/Galloup neck jig—not only out of nostalgia, but also because it remains an excellent method for delivering accurate and reliable guitars. Still, it’s undeniable that the process of fretting, fret dressing, and analytics of fretted instruments has undergone significant transformation, resulting in better sounding—and playing—guitars. And ultimately, that’s what it’s all about.
Plenty of excellent musicians work day jobs to put food on the family table. So where do they go to meet their music community?
Being a full-time musician is a dream that rarely comes to pass. I’ve written about music-related jobs that keep you close to the action, and how more and more musicians are working in the music-gear industry, but that’s not for everyone. Casual players and weekend warriors love music as much as the hardcore guitarists who are bent on playing full time, but they may have obligations that require more consistent employment.
I know plenty of excellent musicians who work day jobs not to support their musical dreams, but to put food on the family table. They pay mortgages, put children through school, provide services, and contribute to their community. Music may not be their vocation, but it’s never far from their minds. So where do they go to meet their music community?
A good friend of mine has studied music extensively in L.A. and New York. He’s been mentored by the pros, and he takes his playing very seriously. Like many, he always had day jobs, often in educational situations. While pro gigs were sometimes disappointing, he found that he really enjoyed working with kids and eventually studied and achieved certification as an educator. To remain in touch with his love of music, he plays evenings and weekends with as many as three groups, including a jazz trio and a country band. Not actually worrying about having a music gig that could support him in totality has changed the way he views playing out and recording. He doesn’t have to take gigs that put him in stressful situations; he can pick and choose. He’s not fretting over “making it.” In some way, he’s actually doing what we all want, to play for the music plain and simple.
Another guy I know has played in bands since his teens. He’s toured regionally and made a few records. When the time came to raise a family, he took a corporate job that is as about as far away from the music business as you can get. But it has allowed him to remain active as a player, and he regularly releases albums he records in his home studio. His longstanding presence in the music scene keeps him in touch with some famous musicians who guest on his recordings. He’s all about music head to toe, and when he retires, I’m certain he’ll keep on playing.
“Seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth.”
I could go on, and I’m sure you know people in similar situations. Maybe this even describes you. So where do we all find our musical compadres? For me, and the people I’ve mentioned, our history playing in bands and gigging while young has kept us in touch with others of the same ilk, or with those who are full-time musicians. But many come to music later in life as well. How do they find community?
Somehow, we manage to find our tribe. It could be at work or a coffee shop. Some clubs still have an open mic night that isn’t trying to be a conveyor belt to commercial success. Guitarists always go up to the stage between changes to talk shop, which can lead to more connections. I like the idea of the old-school music store. Local guitar shops and music stores are great places to meet other musicians. Many have bulletin boards where you can post or find ads looking for bandmates. When I see someone wearing a band T-shirt, I usually ask if they’re a musician. Those conversations often lead to more connections down the line. Remember, building a network of musicians often requires persistence and putting yourself out there. Don’t be afraid to initiate conversations and express your interest in collaborating with others.
Of course, I’m lucky to have worked in the music sphere since I was a teen. My path led to using my knowledge of music and guitars to involve myself in so many adventures that I can hardly count them. Still, it’s the love of music at the root of everything I do, and it’s the people that make that possible. So whether you’re a pro or a beginner, seek out music people regularly. They’re hiding in plain sight: at work, at the park, in the grocery store. They sell you insurance, they clean your teeth. Maybe they’re your kid’s teacher. Musicians are everywhere, and that’s a good thing for all of us.
An amp-in-the-box pedal designed to deliver tones reminiscent of 1950s Fender Tweed amps.
Designed as an all-in-one DI amp-in-a-box solution, the ZAMP eliminates the need to lug around a traditional amplifier. You’ll get the sounds of rock legends – everything from sweet cleans to exploding overdrive – for the same cost as a set of tubes.
The ZAMP’s versatility makes it an ideal tool for a variety of uses…
- As your main amp: Plug directly into a PA or DAW for full-bodied sound with Jensen speaker emulation.
- In front of your existing amp: Use it as an overdrive/distortion pedal to impart tweed grit and grind.
- Straight into your recording setup: Achieve studio-quality sound with ease—no need to mic an amp.
- 12dB clean boost: Enhance your tone with a powerful clean boost.
- Versatile instrument compatibility: Works beautifully with harmonica, violin, mandolin, keyboards, and even vocals.
- Tube preamp for recording: Use it as an insert or on your bus for added warmth.
- Clean DI box functionality: Can be used as a reliable direct input box for live or recording applications.
See the ZAMP demo video here: https://www.youtube.com/watch?v=xJp0jE6zzS8
Key ZAMP features include:
- True analog circuitry: Faithfully emulates two 12AX7 preamp tubes, one 12AX7 driver tube, and two 6V6 output tubes.
- Simple gain and output controls make it easy to dial in the perfect tone.
- At home, on stage, or in the studio, the ZAMP delivers cranked tube amp tones at any volume.
- No need to mic your cab: Just plug in and play into a PA or your DAW.
- Operates on a standard external 9-volt power supply or up to 40 hours with a single 9-volt battery.
The ZAMP pedal is available for a street price of $199 USD and can be purchased at zashabuti.com.