![Rig Rundown: Third Eye Blind [2019]](https://www.premierguitar.com/media-library/youtube.jpg?id=26133292&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C90)
Before the band's co-headlining slot alongside Jimmy Eat World at Nashville's Ascend Amphitheater, lead guitarist Kryz Reid took some time with PG's Perry Bean to update us not only on the additions to his guitar arsenal (yes, he still names them after Star Wars characters, although he has avoided using Jar Jar Binks), but also explains why he stored away his vintage Marshalls and Custom Shop Fender heads in order to embrace the 21st-century power of a Kemper. In addition, we get a peek at lead singer/guitarist Stephan Jenkins' lineup of electrics and acoustics thanks to tech Danny Nolan.
This is Kryz Reid’s No. 1 Gibson Les Paul. It’s named “The Emperor,” and is a custom ’59 made with aged wood and outfitted with relic’d hardware.
This Gibson SG (that’s actually Stephan’s guitar) is only in the touring vault because “Blinded” is in the set within a melody of jams and requires an odd tuning (F–A–C–F–A–E).
Another one the modern side, Kryz Reid plays a 2011 Fano JM6 named “Fett.” Based on a Jazzmaster, the guitar has Lindy Fralin P-90s in the neck and bridge positions and a Bigsby vibrato.
This is Kryz Reid’s Fano TC6 that’s named after Maul.
In our 2014 episode with Kryz Reid, he was traveling with a stock 1966 Fender Telecaster Custom, but this Fender Custom Shop Tele has taken over the touring duties and name of “TK-421.”
This is Kryz Reid’s 2009 Gibson Custom Shop Les Paul named “Tarkin” that is tuned a half-step up.
Here is the newest addition to Kryz Reid’s guitar family—a 2009 Gibson Les Paul Traditional II that comes with pull pots, but he wanted the guitar to be as black as possible (to match its dark name, “Vader”) so all the pots and pickguard were exchanged for something a tad eviler.
One of the newest guitars brought in by Kryz Reid is this Gibson Custom Shop R8 Les Paul that he’s dubbed “BB-8.” All of his guitars use D’Addario strings—this one and all other standard-tuned instruments take .010s. Guitars that are tuned down a whole step take .011s, and anything tuned lower than that uses .012s so Reid has a consistent feel under his fingertips.
This Gibson Custom Shop R0 Les Paul is nicknamed “Tydirium.” Reid keeps it tuned to open D (D–A–D–F#–A–D). It has a weight-relief body with a ’60s profile neck. Kryz shyly admits that it came specially loaded with a set of the same humbuckers put in Jimmy Page’s Custom No. 2.
For stage volume, feedback, and the ultimate, last-ditch backup, Kryz Reid has the Fender Tone-Master ready to rock. The custom finish was done by TokiDoki creator and Italian artist Simone Legno.
In our 2014 Rig Rundown, Kryz Reid was all tube, all day (using a ’93 Custom Shop Fender Tone-Master with a 1965 Marshall Plexi), but since then, and at the behest of the band’s FOH, he and Stephan made the move to the Kemper Profiler. Kryz admits in the video he was a big-time skeptic, but after working with “Dr. Kemper” aka Michael Britt to profile all his tube amps into the Kemper, he was onboard for the ease of touring.
And everything is under Kryz Reid’s control via his feet thanks to this RJM Mastermind GT and a trifecta of Mission Engineering EP-1 pedals.
This Gibson ES-335 used to be Stephan Jenkins’ longtime No. 1 before the Iceman came into the picture.
A second Gibson Explorer that is set to DADGAD for the song “Wounded.”
Here’s an old Gibson Explorer that Stephan Jenkins’ hasn’t toured with since 2002/03.
Paul Stanley’s John Hancock on the guitar’s back plate.
Stephan Jenkins' 1981 Ibanez Iceman
Before you laugh, you gotta watch the opening part of the video where Stephan Jenkins’ tech Danny Nolan explains why and how this became Perkins main ride. Yes, you read that right, a 1981 bolt-on neck Ibanez Iceman is Stephan Jenkins favorite touring guitar. About 10 days before the Nashville date, one of Danny Nolan’s buddies called him up and said that he just got an old Ibanez Iceman signed by Paul Stanley and wondered if he or Stephan would want it. Well, after inspecting it, it was determined it was obviously an import guitar from the early ’80s with a single owner. Danny bought the guitar for less than a new Squier and was walking back to the bus when Stephan spotted the black beast. He grabbed it, took it on the bus, and at soundcheck the next day, Stephan plugged it and blew the FOH guy away. It’s been Stephan’s go-to ever since because it sounds like Dokken—loud and raunchy!
Stephan Jenkins' 1954 Gibson LG-3
During a visit to the tone heaven that is Chicago Music Exchange, Stephan Jenkins nabbed this 1954 Gibson LG-3 and now uses it for most of the acoustic numbers. And to bring its voice to life onstage, tech Danny Nolan put in a Fishman Matrix pickup system.
Click below to listen wherever you get your podcasts:
 |  |
 |  |
D'Addario Micro Tuner:https://www.daddario.com/MicroTunerRR
- Rig Rundown: Failure's Ken Andrews [2019] | 2019-04-02 | Premier ... ›
- Rig Rundown: Silversun Pickups - Premier Guitar | The best guitar ... ›
- Gallery: Pro Pedalboards 2014, Pt. 1 - Premier Guitar | The best ... ›
Supro Montauk 15-watt 1 x 10-inch Tube Combo Amplifier - Blue Rhino Hide Tolex with Silver Grille
This month’s mod Dan’s uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel.
Don’t let the name fool you, this is a purely passive device—nothing is going to be boosted. In general, you can’t increase anything with passive electronics that isn’t already there. Period. But you can reshape the tone by deemphasizing certain frequencies and making others more prominent (so … “boost” in guitar marketing language). Removing highs makes lows more apparent, and vice versa. In addition, the use of inductors (which create the magnetic field in a guitar circuit) and capacitors will create resonant peaks and valleys (bandpasses and notches), further coloring the overall tone. This type of bandpass filter only allows certain frequencies to pass through, while others are blocked, and it all works at unity gain.
“You can’t increase anything with passive electronics that isn’t already there … but you can reshape the tone by deemphasizing certain frequencies and making others more prominent.”
All the systems I mentioned above are doing more or less the same thing, using different approaches and slightly different component values. They are all meant to be updated tone controls. Our common tone circuit is usually a variable low-pass filter (aka treble-cut filter), which only allows the low frequencies to pass through, while the high frequencies get sent to ground via the tone cap. Most of these systems are LCR networks, which means that there is not only a capacitor (C), like on our standard tone controls, but also an inductor (L) and a resistor (R).
In general, all these systems are meant to control the midrange in order to scoop the mids, creating a mid-cut. This can be a cool sounding option, e.g. on a Strat for that mid-scooped neck and middle tone.
Dan Torres offered his “midrange kit” via an internet shop that is no longer online, same with his business website. The Torres design is a typical LCR network and looks like the illustration at the top of this column.
Dan’s design uses a 500k linear pot, a 1.5H inductor (L) with a 0.039 µF (39nF) cap (C), and a 220k resistor (R) in parallel. Let’s break down the parts piece by piece:
Any 500k linear pot will do the trick, in one of the rare scenarios where a linear pot works better in a passive guitar system than an audio pot.
(C) 0.039µF cap: This is kind of an odd value. Keeping production tolerances of up to 20 percent in mind, any value that is close will do, so you can use any small cap you want for this. I would prefer a small metallized film cap, and any voltage rating will do. If you want to stay as close as possible to the original design, use any 0.039 µF low-tolerance film cap.
(L) 1.5H inductor: The original design uses a Xicon 42TL021 inductor, which is easy to find and fairly priced. This one is also used in the Bill Lawrence Q-Filter design, the Gibson standard Varitone, and many other systems like this. It’s very small, so it will fit in virtually every electronic compartment of a guitar. It has a frequency range of 300 Hz up to 3.4 kHz, with a primary impedance of 4k ohms (that’s the one we want to use) and a secondary impedance of 600 ohms. Snip off the three secondary leads and the center tap of the primary side and use the two remaining outer primary leads; the primary side is marked with a “P.” On the pic, you can see the two leads you need marked in red, all other leads can be snipped off. You can connect the two remaining leads to the pot either way; it doesn’t matter which of them is going to ground when using it this way.
Drawing courtesy of singlecoil.com
(R) 220k: use a small axial metal film resistor (0.25 W), which is easy to find and is the quasi-standard.
Other designs use slightly different part values—the Bill Lawrence Q-filter has a 1.8H L, 0.02 µF C and 8k R, while the old RA Gresco Tone Qube from the ’80s has a 1.5H L, 0.0033 µF C, and a 180k R, so this is a wide field for experimentation to tweak it for your personal tone.
This mid-cut system can be put into any electric guitar not only as a master tone, but also together with a regular tone control or something like the Fender Greasebucket, or it can be assigned only to a certain pickup. It can be a great way to enhance your sonic palette, so give it a try.
That’s it! Next month, we’ll take a deeper look into how to fight feedback on a Telecaster. It’s a common issue, so stay tuned!
Until then ... keep on modding!