![Rig Rundown: Gov't Mule's Warren Haynes [2023]](https://www.premierguitar.com/media-library/rig-rundown-gov-t-mule-s-warren-haynes-2023.jpg?id=34115762&width=1245&height=700&quality=85&coordinates=0%2C0%2C0%2C0)
The guitarist rolls into Nashville with a crew of Les Pauls and Firebirds, a pair of 100-watters, and a fine spread of stomps.
Maestro Warren Haynes invited PG’s John Bohlinger to Nashville’s historic Ryman Auditorium, where they hang out after Gov’t Mule’s soundcheck and take a tour through his live rig. This Gibson-heavy collection has been a 40-year-work in progress for the guitarist, who has spent his career playing with David Allan Coe, Dickey Betts, The Allman Brothers, The Dead, leading Gov’t Mule, and much, much more.
New Gov't Mule Album Peace...Like A River out 6/16.
Brought to you by D’Addario XS Strings.
Chester
“Chester,” the guitarist’s own signature Gibson Les Paul, was inspired by a ’58 body and ’59 neck, and is loaded with Burstbucker pickups and a switchable buffered preamp.
Big Red Two
“Big Red Two” is another of Haynes’ signature models, this time an ES-335, which is a copy of the guitarist’s PAF-loaded ’61 model.
Almost Firewood
Thanks to a pair of extra screw holes that were a factory accident, this flame-bedazzled tobacco ’burst LP was marked as a flaw and spent a couple years hanging around, unable to be sold. But back when he was in the Allman Brothers, Haynes visited Gibson and fell in love. He installed Classic ’57 pickups and he’s toured with it since.
The Dead Bird
Haynes picked up his blue mini-humbucker-loaded Gibson Firebird, “The Dead Bird,” when he was playing with the Grateful Dead in 2009 and says it “has a unique sound that’s somewhere between a Gibson and a Fender.”
Three's a Crowd
This Gibson Custom Shop Firebird is loaded with a trio P-90s and, like his other Firebird, stays tuned down a half step. Each of Haynes’ 6-strings are strung with GHS Nickel Rockers .010–.046.
Dirty Dozen
It takes a massive headstock to fit a dozen strings on this Les Paul. Haynes keeps “Railroad Boy” tuned to drop D, and he uses its coil-tap switch for extra flexibility when needed.
100 Watts for Might
Haynes runs a two-amp rig and calls on each at different times—never both at once. On one side is his Soldano SLO-100, which the guitarist had modded by Mike Soldano to boost low-mid response at his preferred low preamp volume settings. The 100-watt head is paired with a Marshall cab loaded with a quartet of 75-watt Celestions.
Home Is Where the Tone Is
On the other side is a 100-watt Homestead head that Haynes runs into a 4x12 cab loaded with 25-watt Celestion Greenbacks.
Warren Haynes' Pedalboard
Haynes uses a Custom Audio Electronics MIDI foot controller to access most of his pedals, which live in an offstage rack. His Ernie Ball JP Jr. volume pedal, signature G-Lab WOWEE Wah WH-1, and a D’Addario tuner sit alongside.
On one shelf of Haynes’ rack sits a gold Klon Centaur, Diaz Texas Ranger treble booster, Boss OC-2 Octave, Emma DiscumBOBulator envelope filter, and a CAE Super Tremolo.
And on the other is a Hughes & Kettner Rotosphere, G-Lab DR-3 Dual Reverb, DigiTech Hardwire DL-8 Delay Looper, MXR Carbon Copy, and a Boss GE-7 Equalizer.
Phat Machine
The Phat Machine
The Phat Machine is designed to deliver the tone and responsiveness of a vintage germanium fuzz with improved temperature stability with no weird powering issues. Loaded with both a germanium and a silicon transistor, the Phat Machine offers the warmth and cleanup of a germanium fuzz but with the bite of a silicon pedal. It utilizes classic Volume and Fuzz control knobs, as well as a four-position Thickness control to dial-in any guitar and amp combo. Also included is a Bias trim pot and a Kill switch that allows battery lovers to shut off the battery without pulling the input cord.
Silk Worm Deluxe Overdrive
The Silk Worm Deluxe -- along with its standard Volume/Gain/Tone controls -- has a Bottom trim pot to dial in "just the right amount of thud with no mud at all: it’s felt more than heard." It also offers a Studio/Stage diode switch that allows you to select three levels of compression.
Both pedals offer the following features:
- 9-volt operation via standard DC external supply or internal battery compartment
- True bypass switching with LED indicator
- Pedalboard-friendly top mount jacks
- Rugged, tour-ready construction and super durable powder coated finish
- Made in the USA
Static Effectors’ Street Series pedals carry a street price of $149 each. They are available at select retailers and can also be purchased directly from the Static Effectors online store at www.staticeffectors.com.
Galloup’s Plek tech Adam Winarski preps a Yamaha acoustic for the machine.
Presently, many certified guitar-repair specialists possess the expertise required to deliver an instrument that both sounds and plays wonderfully. The standards set by manufacturers and distributors have significantly risen, safeguarded by rigorous quality protocols to guarantee the best possible acoustic experience for customers. Additionally, lutherie training has raised the bar for critical processes, and one of the most tricky is fretwork.
Traditional fretwork once involved manual labor, with technicians utilizing sandbags or similar supports to steady the neck as they straightened it with a truss rod during the filing process. A notable advancement in this field came in the mid 1970s when Don Teeter, an author and repair expert, imposed a new method: fixing the guitar body to the bench and using blocks to maintain the neck in a playing position. This refinement was one of many in the continued quest to produce superior instruments by standardized methods.
An example of the Plek’s readings from an acoustic guitar.
Photo courtesy of Galloup Guitars
In the late 1970s, another pivotal innovation was introduced by Dan Erlewine. He created an advanced fret jig with a specialized body-holding system and neck supports, adding another layer of precision to the repair process. During my collaboration with Dan in 1985, we developed a rotating neck jig that counterbalanced the forces of gravity, keeping the instrument in its playing orientation while adjusting the neck supports. This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry. By 1986, our approach had evolved into a freestanding workstation coupled with a sophisticated hold-down mechanism and enhanced neck supports, culminating in increased accuracy, efficiency, and consistency. Over the decades, the Erlewine/Galloup rotating neck jig has become a benchmark in numerous shops, enhancing fretwork performance.
"This step represented a significant leap in establishing control and standardization of fretwork procedures in our industry."
By the 1990s, automated and computerized technologies permeated the guitar manufacturing and repair sectors. Initially applied by import companies in the mass production of guitars, the technology, although expediting processes, did not immediately achieve high execution standards. However, the tech dramatically improved over time, with computer-driven systems eventually transforming the industry. Contemporary automated production utilizing such advancements meets exceedingly high standards of precision. Some bespoke guitar manufacturers, such as Steve Andersen, were pioneers in adopting these methods, but it was companies like Taylor that established them in the modern era.
Inevitably, the progression of technology extended beyond the mere production of parts. Around 1995, German engineer Gerd Anke envisioned the integration of computer-assisted technology into enhancing instrument playability, giving rise to Plek technology, which uses computers to precisely measure and analyze the various components of a guitar, like neck relief, fret height, nut and bridge specs, and more. Nashville guitar-repair tech Joe Glaser was among the first to recognize the machine’s value, followed by San Francisco luthier Gary Brawer. When Heritage Guitar Inc. invested in a Plek machine, the guitar industry could no longer disregard the significance of this innovation.
“The machine’s scanning data confirmed that there was one nature of an ideal fret plane, done by hand or machine, and unsurprisingly, it conformed exactly to what physics predicts, not personal mojo.”
In the spring of 2022, Galloup Guitars obtained its first Plek machine. Promptly, our technician Adam Winarski paved the way for the Plek’s integration in our shop. Now, it’s a rarity for an instrument to leave our shop without having undergone Plek analysis and machining. Impressed by the results of our integration, we created “Intro to Plek” as a course for all students enrolled at the Galloup School of Lutherie, offering our students a practical introduction to this technology. We furthered this educational initiative with a comprehensive one-week intensive “Plek Certification Training Course” for both students and the public. This advanced Plek course serves those seeking to boost their knowledge base and employability in this high-precision field.
Plek is rapidly becoming an industry standard for major manufacturers and smaller shops alike. However, this does not mean that those without access to this technology cannot execute proficient fretwork. Personally, I continue to use my Erlewine/Galloup neck jig—not only out of nostalgia, but also because it remains an excellent method for delivering accurate and reliable guitars. Still, it’s undeniable that the process of fretting, fret dressing, and analytics of fretted instruments has undergone significant transformation, resulting in better sounding—and playing—guitars. And ultimately, that’s what it’s all about.