The Philadelphia band looked back to classic disco and funk grooves to create Playing Favorites, the year’s dirtiest and most danceable power-pop record.
“There are two wolves inside me,” says Kyle Seely. “One of them wants to just bring the JCM800 and a distortion pedal, and the other one’s like, ‘I’m bringing the Helix and I’m making a different patch for every song.’”
Seely, who plays lead guitar in Philadelphia band Sheer Mag, is the designer and engineer behind the guitar sounds for the arena-gone-garage-rock outfit. Matt Palmer, his rhythm guitar counterpart, smirks. “Every single tour, Kyle is like, ‘I’ve finally figured it out, I’m going to simplify it.’ It’s never simpler,” he chuckles.
Seely’s self-described “endless tone quest” and the tight, gritty weave of his and Palmer’s guitars have helped grow Sheer Mag into one of the most beloved independent American guitar bands of the past decade. The core quartet, with vocalist Tina Halladay and bassist and producer Hart Seely, Kyle’s brother, emerged from Philly’s punk scene in 2014 with a string of bare-knuckled EPs. Their first full-length, 2017’s Need to Feel Your Love, scored spots on plenty of reputable year-end lists, and the track “Expect the Bayonet” was featured at one of Bernie Sanders’ 2019 rallies. That year, the band released A Distant Call, another fan and critic favorite, via their Wilsuns label.
Sheer Mag signed to Jack White’s Third Man Records for their new release, but they still did things their way, recording in an industrial warehouse jam space on the edge of Philadelphia.
Now 10 years in, they launched their third LP, Playing Favorites, in March with Third Man Records—their first step into “the proper label world,” says Seely. The record is a lo-fi riot, a hyper, tireless romp through the gasoline-slicked back alleys of disco, punk rock, glam, and metal.
But on Playing Favorites, more than any of their other records, the band is open about their compositional ambition and commitment to making songs that are just a blast to listen to. (The record’s title winks at this.) The thrifted and dirtied-up disco of “All Lined Up” is one of the band’s most impressive compositions to date, topped only by the Boston-ish funk-rock odyssey of “Mechanical Garden.” After a vintage metal intro, the track warps into a string section that slows and then, thanks to some careful tape trickery from Hart Seely, gradually melts upward to a new key and swaggering groove. Later, a scorching, treble-blasted solo from Tuareg guitar hero Mdou Moctar streaks across the stars. But the record’s highlight has to be the delicious strut of “Moonstruck,” which might have the best chorus of the year, and sports some of Kyle Seely’s most exciting lead work yet. (Seely’s Southern rock tendencies and the round, percussive tone of his Nashville Tele are virtually calling cards for the band at this point. “I can’t not add a ton of vibrato,” he says. “I love the Allman Brothers, Marshall Tucker Band, a lot of the major, mixolydian kind of soloing.”)
Kyle Seely's Gear
Kyle Seely handles the bulk of the band’s tone-sculpting, digging for sounds between his JCM800 and his brother Hart’s effects units.
Photo by Joanna Roselli
Pedals
- TC Electronic Mimiq
- Ensoniq DP/4
Strings & Picks
- D’Addario XL Pure Nickel strings
- Dunlop Jazz III nylon picks
Despite the label association, the band recorded Playing Favorites in true Sheer Mag style, in a warehouse in Philly that doubles as a practice space for a bunch of bands. The space’s wiring produces an audible hum on any amp that plugs in there, a stamp that Kyle says can be heard at the very start of “Moonstruck.” Hart engineered the sessions using a 16-channel mixer to a Tascam tape machine—another piece of Sheer Mag’s rough-edged charm. And Hart’s bass lines, which often form a unique melody on their own, cement the band’s signature dual-guitar growl. Though they haven’t been quite as audible until now, disco and funk have always been cornerstones of the Mag sound, alongside classic rock and power-pop. Kyle and Palmer agree that the give-and-take of Chic’s Nile Rodgers and Bernard Edwards was particularly instructive. “They would do this stuff where they were just filling in the space between each other, so they weren’t all just playing the same riff, but there’d be a groove,” says Seely.
“We’re almost like a mashup band, where it’s original content, but we’re essentially mashing up different philosophies of rock.” —Kyle Seely
Those influences are especially present this time out—Playing Favorites is certainly the band’s most danceable record yet. But it’s still a hard-rockin’ power-pop record, and Sheer Mag are still jacking the best vibes from Duke Jupiter, Stampeders, the Records, Neil Diamond, Quiet Riot, Badfinger, and other oddities from the borders of ’70s and ’80s guitar music. Somehow, those sounds haven’t lost their luster. When Palmer returned to Philadelphia from a stint living in Australia, he started playing old Thin Lizzy, Bee Gees, and Twisted Sister records to prepare for making the new album. He was pleasantly surprised to find those classics still moved him. “It was a really special feeling to be as excited about the original influences of the band 10 years later,” says Palmer. “The initial Mag feeling was still there.”
Matt Palmer's Gear
Palmer, seen here with his Peavey T-60, revisited the band’s original influences to prepare for Playing Favorites. They hadn’t lost any of their magic.
Photo by Joanna Roselli
Guitars
- Peavey T-60
Amps
- Fender Hot Rod DeVille III 410
Pedals
- Boss TU-3
- Boss ME-90
Strings & Picks
- Tortex Standard Pick .60mm
- D’Addario .011s
But unlike some of the big-budget, one-note arena- and glam-rock records of the ’80s—which has become one of the most passé and snickered-about genres of the past 100 years—Sheer Mag bookend their hooks with production flourishes that deepen their impact: a weirdo delay here, a doubled vocal there, a grimy sonic palette flickering in the background, all rendered with delicious imagination and precision.
“You do want to punch them in the face with something memorable, but also, I think the record is built to reward repeat listening, and you can dig into the deeper textures and complexity the more you listen to it,” says Kyle Seely. “We’re almost like a mashup band, where it’s original content, but we’re essentially mashing up different philosophies of rock. I get excited when people are like, ‘That sounds like Jackson 5 meets Aerosmith.’”
Sheer Mag - Expect the Bayonet [Live at Urban Lounge]
Sheer Mag rip through their Bernie Sanders-approved warning cry, “Expect the Bayonet,” in Salt Lake City in 2022.
Stompboxtober continues! Enter below for your chance to WIN today's featured pedal from LR Baggs: The Align Series Reverb! Come back each day during the month of October for more chances to win!
LR Baggs Align Reverb Acoustic Reverb Pedal
The Align Series Reverb was built from the ground up to complement the natural body dynamics and warmth of acoustic instruments that we love so much. The circuit seamlessly integrates the wet and dry signals with the effect in side chain so that it never overwhelms the original signal. We shaped the reverb with analog EQ to reflect the natural voice inherent in acoustic instruments. Additionally, the tone control adds versatility by sweeping from warm and muted to open and present. The result is an organic reverb that maintains the audiophile purity of the original signal with the controls set in any position.
Fuchs Audio introduces the ODH Hybrid amp, featuring a True High Voltage all-tube preamp and Ice Power module for high-powered tones in a compact size. With D-Style overdrive, Spin reverb, and versatile controls, the ODH offers exceptional tone shaping and flexibility at an affordable price point.
Fuchs Audio has introduced their latest amp the ODH © Hybrid. Assembled in USA.
Featuring an ODS-style all-tube preamp, operating at True High Voltage into a fan-cooled Ice power module, the ODH brings high-powered clean and overdrive tones to an extremely compact size and a truly affordable price point.
Like the Fuchs ODS amps, the ODH clean preamp features 3-position brite switch, amid-boost switch, an EQ switch, high, mid and low controls. The clean preamp drives theoverdrive section in D-Style fashion. The OD channel has an input gain and outputmaster with an overdrive tone control. This ensures perfect tuning of both the clean andoverdrive channels. A unique tube limiter circuit controls the Ice Power module input.Any signal clipping is (intentionally) non-linear so it responds just like a real tube amp.
The ODH includes a two-way footswitch for channels and gain boost. A 30-second mute timer ensures the tubes are warmed up before the power amp goes live. The ODH features our lush and warm Spin reverb. A subsonic filter eliminates out-of-band low frequencies which would normally waste amplifier power, which assures tons of clean headroom. The amp also features Accent and Depth controls, allowing contouring of the high and low response of the power amp section, to match speakers, cabinets andenvironments. The ODH features a front panel fully buffered series effects loop and aline out jack, allowing for home recording or feeding a slave amp. A three-position muteswitch mutes the amp, the line out or mute neither.
Built on the same solid steel chassis platform as the Fuchs FB series bass amps, the amps feature a steel chassis and aluminum front and rear panels, Alpha potentiometers, ceramic tube sockets, high-grade circuit boards and Neutrik jacks. The ICE power amp is 150 watts into 8 ohms and 300 watts into 4 ohms, and nearly 500 watts into 2.65 ohms (4 and8 ohms in parallel) and operates on universal AC voltage, so it’s fully globallycompatible. The chassis is fan-cooled to ensure hours of cool operation under any circumstances. The all-tube preamp uses dual-selected 12AX7 tubes and a 6AL5 limiter tube.
MAP: $ 1,299
For more information, please visit fuchsaudiotechnology.com.
Cort Guitars introduces the GB-Fusion Bass Series, featuring innovative design and affordable pricing.
Cort Guitars have long been synonymous with creating instruments that are innovative yet affordably priced. Cort has done it again with the GB-Fusion Bass series. The GB-Fusion builds upon Cort’s illustrious GB-Modern series and infuses it with its own distinctive style and sound.
It starts with the J-style bass design. The GB-Fusion features a solid alder body – the most balanced of all the tonewoods – providing a fantastic balance of low, mid, and high frequencies. The visually stunning Spalted maple top extends the dynamic range of the bass. A see-through pickguard allows for its spalted beauty to show through. The four-string version of the GB-Fusion is lacquered in a supreme Blue Burst stained finish to show off its natural wood grain. The five-string version features a classic Antique Brown Burst stained finish. A bolt-on Hard maple neck allows for a punchier mid-range. An Indian rosewood fretboard with white dot inlays adorns the 4-string Blue Burst version of the GB-Fusion with an overall width of 1 ½” (38mm) at the nut, while the GB-Fusion 5 Antique Brown Burst features a Birdseye Maple fretboard with black dot inlays and an overall width of 1 7/8” (47.6mm) at the nut. Both come with glow in the dark side dot position markers to help musicians see their fretboard in the dark. The headstock features Hipshot® Ultralite Tuners in classic 20:1 ratio. They are cast of zinc with aluminum string posts making them 30% lighter than regular tuners providing better balance and tuning accuracy.
Cort’s brand-new Voiced Tone VTB-ST pickups are the perfect J-style single coil with clear and robust bass sounds and classic warmth. The GB-Fusion comes with a 9-volt battery-powered active preamp to dial in the sound. With push/pull volume, blend knob, and 3-band active electronics, players can access a wide array of tones. The MetalCraft M Bridge is a solid, high-mass bridge. It provides better tone transfer and makes string changes easy. Strings can be loaded through the body or from the top giving players their choice of best string tension. The MetalCraft M4 for 4-string has a string spacing of 19mm (0.748”) while the MetalCraft M5 is 18mm (0.708”). Speaking of strings, D’Addario® EXL 165 strings complete the GB-Fusion 4. D’Addario EXL 170-5SL strings complete the GB-Fusion 5.
Cort Guitars prides itself on creating inventive instruments musicians love to play. The GB-Fusion Bass Series is the latest and greatest for musicians looking for a stellar bass guitar that is not only economical, but has the reliable robust sound needed to hold up the back end in any playing situation.
GB-Fusion 4 Street Price: $699.99
GB-Fusion 5 Street Price: $849.99
For more information, please visit cortguitars.com.
Here’s a look under the hood of the funky rhythm-guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. Since we’re still celebrating the 70th birthday of the Stratocaster, this month we will have a look under the hood of the Fender Cory Wong model to see just what’s so special about it. (I can tell you—it’s special!)
Guitarist, songwriter, and producer Cory Wong is renowned for his solo work, his band Fearless Flyers (with Mark Lettieri, Joe Dart, and Nate Smith), and collaborations with artists such as Vulfpeck, Jon Batiste, and Dave Koz. His playing style is deeply rooted in funk rhythm guitar, with a heavy dose of rock and jazz. Well-known for playing a Stratocaster, his signature model was released in 2021, and it’s a unique offering. If you want to build your personal Cory Wong Strat, here is your shopping list, starting with the primary structure:
• Alder body, scaled down to slightly smaller than a regular Stratocaster, with Fender American Ultra body contours
• Maple neck with a rosewood fretboard with rolled edges, modern Fender American Ultra D neck profile, slightly larger headstock, 25.5" scale, 10" to 14" compound radius, 22 medium jumbo frets
• Locking tuners with all short posts, a bone nut, and two roller string trees
• Vintage-style 6-screw synchronized tremolo
• Hair tie around the tremolo springs (which mutes them to enhance the rhythm tone)
• .010–.046 strings (nickel-plated steel)
“While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat.”
For the physical build, as you can see, Wong and Fender created a real signature instrument to his specs and wishes. While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat. My personal favorite of these is the hair tie for muting the tremolo springs. A lot of my funk-playing customers are doing similar things on their Strats to get a dry sound, and they’re using all kinds of funny things in there, like foam, rubber bands, and pieces of cotton, as well as hair ties.
Now, let’s have a look at the electronics:
• Seymour Duncan Cory Wong Clean Machine SSS pickup set
• Standard 5-way pickup-selector switch with classic Strat switching matrix
• 250k master volume pot with a 90/10 audio taper and Fender treble-bleed circuit PCB
• 250k tone pot with a 90/10 audio taper and Fender Greasebucket tone control PCB for only the neck pickup
• 250k audio push-push tone pot with Fender Greasebucket tone control PCB for only the bridge pickup; the push-push switch overrides the 5-way switch and defaults to middle + neck pickup (in parallel) as a preset
• Middle pickup is without tone control
Let’s break this down piece-by-piece to decode it:
Pickups
The pickup set is a custom SSS set from the Seymour Duncan company with the following specs:
• Overwound hum-canceling stacked bridge pickup with a 3-conductor wire and shield in permanent hum-canceling mode (red wire taped off), bevelled alnico 5 magnets, approximately 14.5k-ohm DCR
• Overwound middle single-coil, RWRP, beveled alnico 4 magnets, approximately 7.1k-ohm DCR
• Overwound neck single-coil, bevelled alnico 4 magnets, approx. 7.0k-ohm DCR
The pickups are voiced for clear highs, which perfectly suits Wong’s funky playing style and tone. While a lot of pickup companies will have pickups in that ballpark, it will be difficult to put together a full set that really works as intended. The Duncans in the Cory Wong Strat are available as a balanced set, so if you want to get as close as possible, I think this is your best bet.
5-Way Pickup Selector Switch
Nothing special here, just the standard 5-way switch with two switching stages that is wired like a classic Stratocaster:
bridge
bridge + middle in parallel
middle
middle + neck in parallel
neck
The upper tone pot is assigned to the neck pickup, while the lower tone pot is connected to the bridge pickup, leaving the middle pickup without tone control.
Master volume pot and treble-bleed circuit.
The 250k master volume pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-made Fender guitars. The volume pot has the treble-bleed circuit from the Fender American Pro series, but uses a ready-to-solder PCB from Fender instead of individual electronic parts. The PCB is available from Fender individually (part #7711092000), but I have some thoughts about it. While using a PCB makes a lot of sense for mass production, it has some downsides for us mortal human beings:
• Soldering on PCBs requires some training and also special soldering tools.
• The PCB is quite expensive, while the individual electronic parts are only a few cents.
• The PCB uses ultra-tiny surface-mount parts, so it’s very difficult to repair or mod it to your personal taste.
I don’t think we need a PCB for adding a treble-bleed circuit, so let’s do this project using conventional electronic parts. The treble-bleed PCB contains a 1200 pF capacitor with a 150k-ohm resistor in parallel, plus another 20k-ohm resistor in series. Using individual parts, it looks like this:
Courtesy of single-coil.com
In general, a treble-bleed circuit will help you to combat the “volume vs. tone problem” when using passive single-coil pickups. When you turn down the volume (even just a bit), the high end or treble loss is not proportionate. In other words, a small cut in volume creates a far greater loss in your guitar’s treble response. Using a treble-bleed circuit is an easy way to get rid of this problem, as long as it is calculated carefully.
ONLINE ONLY: If you want to find out more about treble bleed circuits please have a look here: https://www.premierguitar.com/diy/mod-garage/treble-bleed-mod
Next month, we will continue with part two of the Cory Wong Stratocaster wiring, bringing it all together, so stay tuned!
Until then ... keep on modding!