
Photo 1
Believe it or not, on eight out of 10 guitars with tuning problems, the culprit is usually bad strings or the exotic ways they were installed. Here are some ways to combat these issues.
Welcome back to Mod Garage. I’ve wanted to cover this topic for a long time, but to be honest, I didn’t dare because it seems so trivial. I’m sure a lot of you already have a natural routine to assess tuning, but I receive guitars daily for repairs, and enhancing tuning stability is something I hear about a lot—on electric as well as acoustic guitars. There are many reasons why a guitar has problems staying in tune, but today we’ll discuss the simplest one: the strings.
A column about strings? Now he’s crazy, you might say. Believe it or not, on eight out of 10 guitars with tuning problems, it turns out this is caused by the strings themselves and/or the way the strings were installed. For some guitars, the nut or the saddle/tremolo is causing problems; others have problems with the tuners or worn-out bridge pins on acoustic guitars, string trees, etc. But bad strings and exotic ways to install them are reason No. 1 for tuning problems. Let’s have a deeper look into what happens here and what can be done.
“The more windings you have on your posts, the greater the chance for tuning problems.”
Over the years I’ve seen the craziest things people do with their strings. Here are some simple guidelines for you to combat tuning problems, whether it’s an electric or acoustic guitar, or if it has steel or nylon strings.
Possible Problem No. 1: The Strings Themselves
You all know this “problem” when setting up new strings on a guitar: After getting them in tune and playing for a minute, you need to tune them again, and this will last for some time, depending on the material of the strings. This is normal when strings are getting stretched for the first time; they’ll stay in tune after they’ve settled. Here are some hints to get around this:
1. Stretching the strings several times after setting them up by simply pulling them upwards with your hands will speed up this process noticeably. There are also tools for this called string stretchers, but you can simply do it with your hands. This is called pre-stretching and is very simple to do. As a rule of thumb, steel strings will settle sooner than nylon strings.
2. A customer bought “pre-stretched strings” and brought them in so I could try a set of these in the shop. I could notice no difference other than the price, but I wanted to mention that such sets exist.
3. Cryogenic-treated string sets may stay in tune faster right from the start. This treatment is widely used to remove tension, especially out of metal parts—like on high-precision components for racing engines. This might work on steel strings, but I have my doubts that it will work on nylon strings. Funny enough, I’ve never read about tuning improvement on any cryogenic-treated string set, but a lot is mentioned about how good they sound, how long they will last, etc. It’s up to you if these strings sound any different from other string sets. Give it a try. In time, each string set should stay in tune without any problems, no matter what method you use to speed things up.
“Cryogenic-treated string sets may stay in tune faster right from the start.”
Some time ago, I had a British-made Burns guitar from the ’60s on the workbench that was still equipped with the original flatwound string set it came with from the factory. These strings were perfectly in tune after almost 60 years. If the strings aren’t damaged, there should be no problem. A problem I regularly see is that completely new string sets have a rotten egg under the hood, caused by problems during manufacturing. From my experience, it’s mostly steel strings of certain brands and very often the G string, but I’ve also had bad D and B strings out of the box. With such strings, no matter what you try, you can’t get them in tune, and you’ll see they have an unnatural pattern of movement. I have no idea what causes this problem during manufacturing, but just keep this in mind if you run into tuning issues with a new set of strings. The solution is simple: Replace the bad string or the whole set with a new one.
Possible Problem No. 2: The More, the Merrier
Many people think it’s right and important to wind up the complete string length so it can stay in tune better because of the many windings, adding stability (Photo 1). Exactly the opposite is true. The more windings you have on your post, the greater the chance for tuning problems. Getting as few windings as possible on the post is the way to go. Have a look at a locking tuner. They have zero windings on the post for the best possible tuning stability. We’ll talk about how to do this in a minute. The best and funniest statement I’ve heard over the years was from a customer, when I tried to explain that it’s not a good idea to wind up the complete string length. He explained he’ll continue doing this because the manufacturer has good reasons to choose this length. I suppose somebody must do whatever makes somebody happy.
Possible Problem No. 3: Loose Tuners
Whenever you change your strings, make sure all screws and hex nuts from your tuners are tight. With a loose and moving tuner you’ll not only have tuning problems, but it’s also a common source for strange noises you can even hear in the amplified tone of a guitar. Sounds trivial but it’s important.
Possible Problem No. 4: Improper String Installation
This is by far the most common problem, and everyone has their own way of stringing up guitars. Some are superior to others. I don’t say my method I use in the shop is the best and only way that works. But over the years I tried a lot of different methods and the one I want to show and recommend to you is the best-working one for me. It incorporates what we just talked about: putting the least windings possible on the post for maximum tuning stability, mimicking the way a locking tuner works. This works on all standard tuners and is very easy to learn, so give it a try.
If you don’t want to compromise, there is no way around using locking tuners on your guitar. But if locking tuners are 10/10, the winding method that follows is 8.5/10, which is not bad at all.
I’m showing the winding method on an acoustic guitar with a 3/3 tuner configuration, but it also works with a 6L or 6R tuner configuration. It won’t work with the ’50s vintage Kluson types you often see on Stratocasters and Telecasters because there is no string hole on the post other than the one on top.
1. Position the post of the tuner so the string hole will be in line with the corresponding string slot for a string on the nut.
Photo 2
2. Guide the string through the string hole of the post and leave only a little slack. As a guideline, if you can put the fingers of your right hand underneath the strings, that’s enough. Now, use a finger of your right hand and lock the string after the nut, leaving a little slack lying on the fretboard (Photo 2). I like to snip off a good portion of the rest of the string at this point, to make the following process easier. But you can also leave it full length until you’re finished—whatever you like best.
Photo 3
3. Bend the rest of the string around the post sharply so it will form a “V.” Don’t forget to still keep the string locked with a finger (Photo 3).
Photo 4
4. Next, put the rest of the string underneath the string, pressing it firmly against the post, still locking the string with your finger, and bend it over the string (Photo 4 and Photo 5).
Photo 5
5. Tune up your string and release the finger you used to lock the string. You’ll only need a very small movement of the tuner to get the string up to tune, so this is something you’ll have to get used to. Cut off the rest of the string and you’re done (Photo 6).
Photo 6
On a 6-in-line tuner configuration, you can proceed with the other strings as shown. With a 3/3 configuration, you’ll have to mirror the process with the G, B, and high-E string. The rule of thumb is the rest of the string is always bent towards the middle of the headstock to create the “V.”
It’s very simple to do and very effective. It’s also important to lock the string with your finger during the whole process until it’s up to tune.
When you have a guitar that won’t stay in tune, chances are good that this is all you need to do. If this doesn’t help, at least you did everything that could be done before consulting your local luthier. And your luthier will be impressed about your troubleshooting, for sure. It will save them some time troubleshooting and it’ll save you some bucks, too.
Next month we’ll finally finish our DIY relic’ing project, so stay tuned.
Until then ... keep on modding!
- D'Addario Releases NYXL Line of Strings ›
- The Recording Guitarist: Should You Change Your Electric's Strings ... ›
- Do Bigger Strings Really Make for a Louder Acoustic Guitar ... ›
- Modifications for a Gretsch Guitar Circuit - Premier Guitar ›
- The Dangers Of Replacing Your Vintage Guitar’s Tuners ›
- Is a Variable Dummy Coil the Solution to Single-Coil Hum? ›
We’re not slowing down! Enter Stompboxtober Day 15 for your chance to win today’s featured pedal from Solo Dallas!
Orbiter Fuzz Pedal
Discover the SoloDallas Orbiter Fuzz, a meticulously crafted effects pedal designed to combine genuine vintage tones with user-friendly versatility. Building upon the legacy of the 1966 Arbiter Fuzz, the Orbiter Fuzz adds fine-tuning circuitry to this already amazing vintage circuit.
This compact multi-effects unit provides four simultaneous effects with a user-friendly experience inspired by traditional guitar pedals.
The effects are based on the award-winning Axe-Fx III, and include hundreds of classic stompbox and studio effect models, including drives, delays, reverbs, choruses, flangers, phasers, pitch, plex, EQs, compressors, wah, tremolo, and many more.
Key features include:
• Uncompromising Sound Quality: True to Fractal Audio's reputation, the VP4 delivers pristine sound quality, and is suitable for use on the world's finest stages and studios.
• Four Footswitches: Classic ON/OFF switching makes it easy and intuitive to use the VP4 like four traditional pedals. Meanwhile, the factory default “Gig Mode” switching system places Presets, Scenes, Effects, Channels, Tuner, and Tap Tempo right at your feet.
• 104 Presets: Each preset is like a complete pedalboard with your choice of four effects. This flexibility allows a single VP4 to replace an entire collection of other effects. Additionally, each preset has its own Noise Gate, Master EQ/levels, and more.
• Expression Pedal Compatibility: Connect up to two expression pedals or switches for real-time control of effect settings. The Fractal Audio EV-1 and EV-2 are perfect choices!
• Accurate Tuner: The VP4 includes a dedicated large display tuner mode, plus a handy “mini-tuner” that’s always visible. It uses our latest pitch detector from the Axe-Fx III.
• Flexible, High-Quality Connectivity: Mono/stereo analog I/O, with unity gain an ultra-low noise floor, “4CM Mode” allows you to divide effects in front of your amp and in its loop. Plus: buffered analog bypass, SPDIF digital I/O, MIDI I/O, and USB audio/MIDI capabilities.
• Beyond the Basics: For those who want to go beyond a basic pedalboard, the VP4 supports Scenes, Channels, Modifiers, and more for a highly customizable experience.
• VP4-Edit: Customize your VP4 with VP4-Edit, a free companion software editor and librarian.
• Upgradeable Firmware: Like every Fractal Audio processor, the VP4 features upgradeable firmware, ensuring that you can enjoy free updates with new features and improvements.
The VP4 combines ease of use with exceptional performance, offering musicians a high-quality, versatile effects tool. Featuring a pristine signal path and rugged, road-ready design, the compact VP4 delivers world-class multi-FX processing to take your sound to the next level. The VP4 also works great with acoustic guitar, bass, keyboards, and other instruments.
Retail Price: $699 Availability: October 15, 2024 Visit https://fractalaudio.com/vp4 for updates and to purchase, or contact your local Fractal Audio dealer for inquiries outside the USA/Canada.
Fender's American Ultra II series offers the ultimate blend of tradition and modernity, featuring advanced Ultra Noiseless and new Haymaker Humbucker pickups, stunning finishes, and a sleek Modern “D” neck shape.
Fender Musical Instruments Corporation (FMIC) today continues its industry-defining innovation, launching the next iteration of the coveted American Ultra series—Fender’s most advanced series of electric guitars - by taking that hyper-modern recipe and turning it up to 11 for American Ultra II.
At a time when projections indicate the electric guitar market is set to grow by USD 1.45 billion from 2024-2028, driven by increasing demand for music-related leisure activities¹, the introduction of the American Ultra II series exemplifies a steadfast commitment to innovation, with every detail reflecting a relentless pursuit of perfection. At Fender, innovation is an ongoing, dynamic process fueled by a deep passion for enhancing the playing experience. Long before the American Ultra series hit the market, discussions were already underway about future possibilities, sparked by spontaneous experiments and real-world feedback from the innovators who play these guitars.
The American Ultra II series is built in Fender’s iconic California factory where guitars are meticulously crafted using a blend of time-honored techniques and state-of-the-art CNC technology, ensuring every instrument embodies the perfect balance of tradition and modernity. Massive green punch presses and decades-old tools, some dating back to the 1950s, sit alongside advanced machinery that allows for precise shaping and flawless consistency.
“With the work and heart that went into creating the American Ultra II series, there's a lot of soul in these guitars,” said Justin Norvell, EVP of Product at FMIC. “We refer to it as the “sports car” of the Fender lineup, it’s designed to push boundaries and redefine what a Fender guitar can be, catering to both traditionalists and those exploring new, faster, and more intricate playing styles. This is a guitar that doesn’t fight you; instead, it gets out of the way, allowing you to focus purely on your performance, whether you’re playing soulful solos, fast riffs, or complex chord progressions.”
Featuring stunning finishes, modern body contours, a Modern “D” neck shape, and the most advanced Ultra Noiseless™ and new Haymaker™ Humbucker pickups, American Ultra II bridges the gap between Fender’s classic designs and high-performance instruments typically associated with Fender’s specialty brands such as Charvel, EVH or Jackson. The guitars’ unique neck profiles provide an effortless glide along the fretboard, making for an incredibly smooth and responsive feel that increases precision. The American Ultra II series is an ideal fit for players who love the iconic look and sound of a Fender guitar, but crave the speed and playability of a performance guitar adept for playing across genres, from neo-soul and jazz to metal and funk.
A welcome balance to the ultra-modern specs, the American Ultra II also embodies the hallmark qualities that make Fender guitars timeless including unparalleled versatility, modularity, and signature tone. Whether a player is chasing the crystalline clarity of classic Stratocaster® sounds, the bite of a Telecaster®, or the deep growl of a Jazz Bass®, the American Ultra II series is built to handle it all. In addition to the standard models, the series includes Ultra II Jazz Bass® V, a left-hand Stratocaster® model as well Ultra II Meteora® guitar and bass.
Top Highlights Include:
- Fender’s Fastest-Playing Necks: The quartersawn maple neck has a comfortable modern “D” shape and is topped with an ebony or maple fingerboard with Luminlay side dots and Ultra rolled edges
- Upgraded Noiseless™ Pickups: The Ultra II Noiseless™ pickups deliver classic Fender® single-coil sound – without the hum
- Ultra Comfort And Playability: A sculpted neck heel and sleek rear body contours offer next-level comfort and playability
American Ultra II Models & Pricing
- American Ultra II Stratocaster - $2,199.99-2,249.99
- American Ultra II Stratocaster HSS - $2,249.99
- American Ultra II Telecaster - $2,199.99
- American Ultra II Meteora - $2,249.99
- American Ultra II Precision Bass - $2,199.99
- American Ultra II Jazz Bass - $2,299.99
- American Ultra II Jazz Bass V - $2,399.99
- American Ultra II Meteora Bass - $2,299.99
American Ultra II Series | Fender
Join Premier Guitar contributor Tom Butwin as he tries five powerful guitar plugins that will transform your guitar recordings.