Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.
Make'n Music - Chicago - Part I
Premier Guitar went On Location to check out Chicago's Make'n Music, a ridiculously well-stocked, high-end guitar store.
For more information:
Make'n'Music
The in-demand gunslinger brings a load of silverware to arenas across the world.
Devon Eisenbarger, session ace and touring shredder for stars including Chappell Roan and One Direction’s Zayn Malik, met up with PG’s Chris Kies at Nashville’s Bridgestone Arena before hitting the stage with Katy Perry to show off the sleek 6-string rig she’s using on Perry’s Lifetimes tour.
Eisenbarger cut her teeth on a Stratocaster, and its sonic character still feels like home. She filmed a demo for Fender using this American Professional II Strat with a coil-splitting humbucker in the bridge—the best she’s heard so far. This one and all other electrics run D’Addario strings (.010–.046).
Fiery Fiore
Eisenbarger just scored this PRS Fiore before this tour. It has a beefier, slightly more midrange-y sound than the Strat.
Silver Surfer
This Ernie Ball Music Man StingRay II, designed in collaboration with Cory Wong, was made for Eisenbarger just before this run of shows.
Saintly Signature
Eisenbarger uses this Ernie Ball Music Man St. Vincent Signature for “I Kissed a Girl.”
Taped-Up Taylor
This Taylor 814ce, wrapped in silver tape, comes out for a mid-show acoustic set.
Devon Eisenbarger’s Rack Setup
Eisenbarger runs an all-digital rig, contained in this rack backstage. The key pieces are a Radial JX42, two Shure AD4Ds, a Kemper Profiling Amplifier, and a Fractal Axe-Fx. The Kemper runs a SELAH SOUNDS pack of profiles and impulse responses.
With no onstage monitors, Eisenbarger’s signal runs only to in-ear monitors and front of house.
The cosmic-country cowboy touts a rig inspired by the greats and powered by a mix of vintage and modern-day gear.
Hot on the heels of his new record, Horizons, Daniel Donato took PG’s John Bohlinger on a trip through his live setup, which spans more than 70 years of electric-guitar history.
This Fender Custom Shop 1963 Telecaster has “everything that a great traditional Telecaster needs,” says Donato.
Jack of All Trades
This DGN Custom Guitars T-style, built by Dan Neafsey, is dubbed the Epoch. Donato wanted a Tele that he could play all night without tiring of the tones, so Neafsey assembled this do-it-all electric. Its body is an eighth of an inch smaller than a traditional Tele’s, and its flame-maple neck sports a compound radius. Neafsey wound the PAF-style pickups, which can be configured as overwound single-coils via a coil-tap function. The steel ashtray bridge was cut to fit a humbucker.
Donato plays Dunlop Jazz III picks, and loads his guitars with a .010–.052 set of Ernie Ball Slinky strings.
Pro Tip
This 1966 Fender Pro Reverb is the first black-panel amp Donato ever purchased. It’s been converted to a 2x12 configuration in place of the usual 1x15, and it’s loaded with Weber 12F150 speakers.
Daniel Donato’s Pedalboard
Donato says that while the Pro Reverb is the steak, the Fender Tonemaster Pro is the best thing to season it with. His effects run into this floor unit, which is set to a black-panel Twin Reverb program, through a Radial Highline, and out to the front of house at a clean, crisp level. Donato uses some of the Tonemaster Pro’s onboard effects, too, like a graphic EQ and tape echo.
The rest of the board, designed by XAct Tone Solutions, carries a Dunlop X Volume Mini and CAE Wah, Gamechanger Audio Plus, Greer Lightspeed, a Keeley Noble Screamer, Cosmic Country Phaser, and Rotary, a Strymon TimeLine, Walrus R1, Universal Audio Max, DigiTech FreqOut, and Eventide H90.
An EHX Hum Debugger, always on, rests on top of his amp to keep his Teles in line.
OC Pedal Co. was formed in 2024 by Santa Ana native Evan Haymond, a session ace who toured with Jack Russell of Great White in the 2010s. Not surprisingly, OC Pedal Co.’s U.S.A.-made LA HABRA Hard Clipper evokes many of the crunchy sounds from that era.
Less is More
The LA HABRA’s control panel is minimal, with just two knobs—volume and tone. There’s no gain knob, instead you get a gain switch that lets you choose between two clipping profiles. In the right position the pedal employs op-amp clipping. Set it to the left and a set of LED diodes are activated. With humbuckers, the gain switch set to LED mode, and the tone knob at 11:00, the LA HABRA produced a toothy sound that, sure enough, produced power chord sounds that sounded more than a little like Great White’s cover of “Once Bitten, Twice Shy.”
Though the lack of a gain knob may leave some players feeling limited, the tone knob is a powerful tool for shaping the characteristics of the distortion, and with the tone knob at its darkest setting, the LA HABRA still delivers ample definition. Move the tone knob up to around 3:00, though, and there’s enough clarity and treble detail to make leads sizzle. To my ears this is where the pedal shines, and bumping the tone knob all the way up (with the gain switch still set to the LED clipping mode), the sound is super aggressive without being over-saturated.
In general, with the gain switch set to LED clipping you get a high-end boost and hear and feel more compression. Op-amp clipping tames some of the highs yielding a more balanced output, which is particularly noticeable when the tone knob is set to 3:00 and above. I generally preferred the gain switch set to op-amp clipping but each clipping mode yields sounds that can work in many contexts.
The Verdict
The LA HABRA has plenty of definition for melodic parts and is tough enough for bluesy riffs. For legato shred-type playing, there were times when I wished the pedal had a little more gain. But LA HABRA has a knack for feeling amp-like, particularly in terms of dynamics and touch sensitivity—much more so than many pedals that occupy this mid- to high-mid-gain category.
Darkglass Electronics is a bass player’s company. And like many bass-centric brands, they sometimes seem determined to ensure that guitar players aren’t the only ones having fun when it comes to amps and effects. If that’s true, the DSP-driven Anagram may be their most impressive form of revenge yet.
All The Things, All So Small
The Anagram is a sleek unit with just three footswitches and six knobs above the touch screen. Plug in the unit (there’s no on/off) and the screen lights up, welcoming you to your journey. It’s an inviting interface, and it’s hard to avoid the impulse to just start tapping and scrolling.
Connection options are plentiful: There’s a send and return that can be configured as a stereo effects loop or a mono loop and expression pedal input, a 1/8" headphone jack, and a USB-C port along with two 1/8" MIDI ports for connecting an external MIDI controller and sending MIDI. Four outputs take up half of the back panel, with two XLRs and two 1/4" jacks.
Looking Through the Darkglass
There are 19 pages of tutorial you can scan on the touch screen after the initial power up, but that shouldn’t be discouraging. The Anagram is, in general, easy to grasp. There are three modes that can be used to navigate its many features. Preset mode uses footswitches to move between presets, though there will be an audible gap when you switch between them. Stomp mode allows you to use the footswitches to toggle between three virtual stompoxes within a preset, so you can, for instance, use the chorus on a bridge and overdrive for your bass solo. The deeper scene mode enables you to seamlessly switch between scenes, which can include completely different groups of pedals and settings. Think of it as an octopus switching multiple stomps and turning knobs for you all at once.
Three screen views are available: chain, bindings, and name. Chain view provides the most pedalboard-like representation of the signal path. This is where you can manage and route your preset’s effects in an efficient, more “analog” way. It’s intuitive and the most direct way to create a preset from scratch or reshape an existing one. Bindings mode allows access to parameters within a preset and enables you to assign the most critical controls to the six knobs at the top of the Anagram. Name mode displays—you guessed it—the name of the active preset. It’s the easiest readout to see in a low-light stage setting. But if any of the individual views don’t serve your purposes, the modes can be combined in multiple configurations.
The Anagram makes editing global settings a breeze. Hold down the sixth knob to enter mixer mode, where you can control the L/R and XLR outputs—either individually or linked for consistent volume—as well as the headphone and master outputs. Tapping the “EQ” box in this screen takes you to the very precise global EQ, where you can adjust gain, width, and frequency in a range from 25 Hz to 16.0kHz.
Ana-tons of Tone
With more than 50 effects (Darkglass says that thousands of additional effects and amps are available via integration with the Neural Amp Modeler), Anagram's factory presets are a great place to begin exploration. I jumped down the rabbit hole starting with Factory preset 01—“harmonic booster.”In this preset, there are six elements in the chain, and when one of the six knobs along the top row are pressed, the corresponding effect goes dark, signaling that the effect is off. The same six knobs also control user-defined parameters within the effect, or a virtual speaker cab, if you switch one into the chain. Once you’re happy with your tweaks, you tap the three dots on the touch screen and save the preset. It’s really simple. Swapping effects within a preset is just as quick—tap the pedal icon you want to change, and you’ll jump straight to its edit screen.
While the sounds are superb, the Anagram truly shines in its ease of programmability and the precision with which you can switch things up.
Paired with my passive, J-bass-style Bluesman Vintage Eldorado, the harmonic booster preset was enough to make my day. Though there are 12 effect blocks available—or 24 in parallel—in that preset, only five are used in its factory preset form, permitting me to add rich chorus and octave to the already satisfying tone. The depth of familiar effects and amps is impressive. With searing overdrives, signature Darkglass pedals, and a super-wide range of bass-centric effects, I was like a kid in a candy store. And there are also 20 cab options and a boatload of mic options that can be situated in different positions relative to the cab. The options are seemingly endless.
The Verdict
The Anagram is ideal in a lot of settings. For fly dates, it’s compact and easy to re-program if, say, you add a new song to the set on a whim. Provided there is a proper P.A., the unit is truly all you need to get the job done. Able to run the gamut of vintage and modern sounds, it could be a cover-band bass player’s best friend. And while the sounds are superb, the Anagram truly shines in its ease of programmability and the precision with which you can switch things up. From an economic standpoint, the Anagram is the equivalent of purchasing several traditional floor pedals … and then getting hundreds more for free. At just under $1,200, that’s math that makes sense.
Unlock your guitar's true potential with the Fralin Pickups Push-Pull Blender Pot! Blend tones, split coils, and explore endless sonic possibilities without permanent changes. Ready to elevate your sound? Check out the Joe BonamassaHumbucker Set and more gear to keep your music alive!
Fralin Pickups
Push Pull Blender Pot
Unlock a wider range of tones with the Fralin Pickups Push-Pull Blender Pot. Compatible with guitars and basses, this versatile control blends pickup outputs, adds coil-splitting and out-of-phase options, and enables many wiring mods—giving you flexible, player-friendly tonal shaping without permanent changes to your instrument.
Joe Bonamassa has long been a fan of Tommy Bolin, whose work influenced generations of guitarists. After a 10-year search, Joe acquired Tommy’s 1960 GibsonLes Paul and worked with the Seymour Duncan Custom Shop to recreate these P.A.F.s. The first 500 sets are signed by Joe and Seymour Duncan.
Don’t let fret sprout stop you from playing your favorite guitar. This kit has everything you need to fix it yourself. When dry weather comes around, your fretboard can shrink and the fret ends poke out. Sharp fret ends can slow you down, feel uncomfortable, or cut your hand.
When performing live, the small problems can turn a great show into a nightmare. A loose screw, slipping string, or guitar poorly leaned against an amp can create major stress. So, we created the Guitar Tech Case Candy Set—a compact collection of essential tools designed to keep your guitar stage-ready.
Designed for matching specific fretboard curvatures, Floyd Rose Original saddle sets now offer several radius options without the need for individual saddle shims. Crafted in the U.S. from high-quality tool steel using precision CNC machining, the saddles are then heat-treated and plated to withstand the demands of the heaviest performers.
Introducing authentic upgradable hardware kits for FR Tremolo Systems, available in eight stainless steel finishes as well as titanium. Each hardware upgrade kit comes with seven string-lock screws, seven saddle-mounting screws, four nut-clamping screws, four block mounting screws, and string lock insert blocks.
![Devon Eisenbarger [Katy Perry] Rig Rundown](https://www.premierguitar.com/media-library/youtube.jpg?id=61774583&width=1245&height=700&quality=70&coordinates=0%2C0%2C0%2C0)
StewMac
