Having gained access to a specimen from Seattle's Museum of Pop Culture, Paul Reed Smith takes aim at the tones of Hendrix's modified Woodstock head.
Fantastic range of Marshall-esque tones, from clean and lovely to tough, mean, and singing.
No standby switch. Minor cab rattling audible at moderate volumes. Head may need securing at high volume and bass settings.
$2,900 (head)
$899 (2x12 Stealth)
PRS HX 50
prsguitars.com
Just as PRS's 2012 HXDA was inspired by firsthand looks at one of slide legend Duane Allman's amps from his seminal AtFillmore East performance, the brand-new HX 50 is the result of Paul Reed Smith and PRS amp guru Doug Sewell getting extensive access to a Marshall head reportedly used by Jimi Hendrix during his iconic performance at the 1969 Woodstock festival.
That amp—a circa-'68/'69, 100-watt Super Lead modified for Hendrix by Dave Weyer of West Coast Organ and Amp—currently resides at the Museum of Pop Culture in Seattle, Washington, and Smith and Sewell's perusing of the circuit was made possible by the museum's proprietor, Microsoft cofounder Paul Allen. Lending additional credence to the original amp's provenance and pedigree, a small stenciling of the "Authentic Hendrix" badge appears on the HX 50's rear panel to indicate endorsement by the late guitarist's estate.
Under the Hood
The HX 50 reviewed here is powered by a pair of New Sensor EL34s and it uses a custom power supply whose rectification and capacitor arrangements are exactly like the 100's. Ostensibly, this avails more reasonable volumes and easier breakup while helping to imbue the amp with headroom and responsiveness more like the 100. The circuit is meticulously handwired on a thick (2 mm), 2-sided, through-hole printed circuit board—which, in a nice homage, is purple rather than the typical green. A trio of 12AX7s drives a preamp with presence, bass, middle, treble, treble volume, and bass volume knobs, as well as an off/on high-mid toggle and a 3-position brightness selector. While vintage Super Leads like Hendrix's Weyer-modified Marshall feature four inputs—which many famous players have "jumpered" (connected in series using a 1/4" patch cable) to tap more gain from the circuit, the HX 50 and 100 have a single input that's internally jumpered to the same effect.
By way of explaining the deviations from vintage-plexi architecture, Sewell says, "This is not a painstakingly historical recreation of the amplifier Hendrix used, but a snapshot in the development of a series of modified amps he came to use on tour and in the studio. Consideration was given to reliability, compatibility with his effects and guitars, the tones he achieved, and the feel and response of the amp."
In most cases I found myself turning outboard boost or gain pedals off before long, preferring the HX 50's beautifully articulate and open-feeling power-amp distortion—although a vintage-voiced germanium fuzz sounded as Hendrix-y wonderful as I could've hoped.
Castles Made of Sound
I tested the HX 50 (through the accompanying PRS cab featuring two Celestion G12H-75s) using a Strat, a Jazzmaster with Curtis Novak JM-V and JM-Fat pickups, a '57 Classic-loaded Les Paul, and a Schecter Ultra III equipped with a TV Jones Magna'Tron. From the outset I was impressed with the low noise floor, even at very loud and saturated settings. I didn't really hear any hum or squealing unless I was very close to the amp and using single-coils or slathering on gain from a stompbox. (On the latter point, in most cases I found myself turning outboard boost or gain pedals off before long, preferring the HX 50's beautifully articulate and open-feeling power-amp distortion—although a vintage-voiced germanium fuzz sounded as Hendrix-y wonderful as I could've hoped.)
As you'd expect from an amp inspired by a vintage classic, the range of tones available from the HX 50's EQ is moderate compared to some modern designs, but in terms of what you'd expect from a procured plexi, it's impressively wide ranging. With humbuckers or single-coils, I had no trouble making any guitar chime, sing, or sting—or the other way around—using just the knobs. The presence and mid controls can either sharpen your guitars' teeth or imbue them with a more "American," scooped-mid cushiness. Meanwhile, facile combinations of the treble and bass channel volumes—or even dialing one out completely—further the lean-and-clean(-ish) to velvety-thick possibilities. (Interestingly, even as a favorer of bright-ish single-coil tones, I rarely felt the need to engage the high-mid or bright toggles—neither of which were featured on the reference Marshall, although players of darker-sounding instruments or users of extensive outboard effects might appreciate their inclusion.)
Further, while the HX 50 certainly won't pummel like, say, a Mesa Rectifier or a Diezel through a Rivera sub, for its size and power, it's impressively punishing in the lower registers. Enough so that, at more aggressive settings, even the middle position on my Jazzmaster threatened to vibrate the head toward its cab-diving demise (thank you, Gorilla Tape!). Meanwhile, even at low channel volumes (treble volume at 2 and bass volume at 1, with presence and bass dimed, made for a lovely pedal platform), the HX 50 sounds virile and open, yet is also loud enough to hang with a reasonably volumed band.
The Verdict
In terms of construction, tones, and versatility, the PRS HX 50 is a lovely brute of an amp worth trying regardless of your affinity for Hendrix or his tones. Sure, it can help you get to hazy-purple realms if you're so inclined, but for me it was even more fun to discover a slew of sounds that work for what I do. Whichever way you dial it, it's a damn good-sounding vintage British-style specimen.
- First Look: PRS SE Hollowbody II Piezo - Premier Guitar ›
- PRS Silver Sky John Mayer Review - Premier Guitar ›
- How Mikael Åkerfeldt Made Opeth's New Album: “Big, Pompous ... ›
- PRS Studio Review - Premier Guitar ›
- PRS Releases the SE Santana Abraxas 50th Anniversary Limited Edition - Premier Guitar ›
- PRS Takes on Hendrix—the PRS HX 50 First Look Demo - Premier Guitar ›
- First Look: PRS SE Silver Sky John Mayer - Premier Guitar ›
- PRS Introduces the Robben Ford LE, HDRX Amp, & Two Acoustics - Premier Guitar ›
- Factory Tour: PRS Guitars - Premier Guitar ›
Stompboxtober is finally here! Enter below for your chance to WIN today's featured pedal from Diamond Pedals! Come back each day during the month of October for more chances to win!
Diamond Pedals Dark Cloud
True to the Diamond design ethos of our dBBD’s hybrid analog architecture, Dark Cloud unlocks a new frontier in delay technology which was once deemed unobtainable by standard BBD circuit.
Powered by an embedded system, the Dark Cloud seamlessly blends input and output signals, crafting Tape, Harmonic, and Reverse delays with the organic warmth of analog companding and the meticulous precision of digital control.
Where analog warmth meets digital precision, the Dark Cloud redefines delay effects to create a pedal like no other
Jackson Guitars announces its first female signature artist model, the Pro Series Signature Diamond Rowe guitar.
“I‘m so excited about this new venture with the Jackson family. This is a historic collaboration - as I am the first female in the history of Jackson with a signature guitar and the first female African American signature Jackson artist. I feel so honored to have now joined such an elite group of players that are a part of this club. Many who have inspired me along this journey to get here. It’s truly humbling.” says Diamond.
Diamond Rowe is the co-founder and lead guitarist for the metal/hard rock band Tetrarch. Since co-founding the band in high school, Tetrarch has become one of the most talked about up-and-coming bands in the world - with several press outlets such as Metal Hammer, Kerrang, Revolver, Guitar World and many others boldly naming Diamond Rowe the world’s next guitar hero. Tetrarch has connected with many fans while performing on some of the world's biggest stages garnering spots alongside several of the heavy music world’s biggest names such as Guns N’ Roses, Slipknot, Lamb of God, Disturbed, Avenged Sevenfold, Sevendust, Rob Zombie, Trivium, and many many others. The Jackson Pro Series Signature Diamond Rowe DR12MG EVTN6 is based on Jackson’s single-cut Monarkh platform and is a premium guitar designed for progressive metal players seeking precision and accuracy.
Crafted in partnership with Diamond, this model boasts a 25.5 “ scale, Monarkh-styled nyatoh body draped with a gorgeous poplar burl top, three-piece nyatoh set-neck with graphite reinforcement, and 12˝ radius bound ebony fingerboard with 24 jumbo frets. The black chrome-covered active EMG® 81/85 humbucking bridge and neck pickups, three-way toggle switch, single volume control, and tone control provide a range of tonal options. The Evertune® bridge ensures excellent tuning stability, while the Dark Rose finish with a new custom 3+3 color-matched Jackson headstock and black hardware looks simply stunning.
To showcase the Pro Plus Signature Diamond Rowe DR12MG EVTN6, Diamond shares her journey as a guitarist, delving into the inspiration behind her unique design specifications and the influential artists who shaped her sound within a captivating demo video. This video prominently features powerful performances of Tetrarch’s latest release, “Live Not Fantasize,” and “I’m Not Right” showcasing the DR12MG EVTN6’s unparalleled tonal versatility and performance capabilities.
MSRP $1699.99
For more information, please visit jacksonguitars.com.
Tetrarch's Diamond Rowe Unveils Her New Signature Pro Series DR12MG EVTN6 | Jackson Guitars - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Jackson Pro Series Signature Diamond Rowe Electric Guitar - Dark Rose
Signature Diamond Rowe, Dark RoseCort Guitars introduces the GB-Fusion Bass Series, featuring innovative design and affordable pricing.
Cort Guitars have long been synonymous with creating instruments that are innovative yet affordably priced. Cort has done it again with the GB-Fusion Bass series. The GB-Fusion builds upon Cort’s illustrious GB-Modern series and infuses it with its own distinctive style and sound.
It starts with the J-style bass design. The GB-Fusion features a solid alder body – the most balanced of all the tonewoods – providing a fantastic balance of low, mid, and high frequencies. The visually stunning Spalted maple top extends the dynamic range of the bass. A see-through pickguard allows for its spalted beauty to show through. The four-string version of the GB-Fusion is lacquered in a supreme Blue Burst stained finish to show off its natural wood grain. The five-string version features a classic Antique Brown Burst stained finish. A bolt-on Hard maple neck allows for a punchier mid-range. An Indian rosewood fretboard with white dot inlays adorns the 4-string Blue Burst version of the GB-Fusion with an overall width of 1 ½” (38mm) at the nut, while the GB-Fusion 5 Antique Brown Burst features a Birdseye Maple fretboard with black dot inlays and an overall width of 1 7/8” (47.6mm) at the nut. Both come with glow in the dark side dot position markers to help musicians see their fretboard in the dark. The headstock features Hipshot® Ultralite Tuners in classic 20:1 ratio. They are cast of zinc with aluminum string posts making them 30% lighter than regular tuners providing better balance and tuning accuracy.
Cort’s brand-new Voiced Tone VTB-ST pickups are the perfect J-style single coil with clear and robust bass sounds and classic warmth. The GB-Fusion comes with a 9-volt battery-powered active preamp to dial in the sound. With push/pull volume, blend knob, and 3-band active electronics, players can access a wide array of tones. The MetalCraft M Bridge is a solid, high-mass bridge. It provides better tone transfer and makes string changes easy. Strings can be loaded through the body or from the top giving players their choice of best string tension. The MetalCraft M4 for 4-string has a string spacing of 19mm (0.748”) while the MetalCraft M5 is 18mm (0.708”). Speaking of strings, D’Addario® EXL 165 strings complete the GB-Fusion 4. D’Addario EXL 170-5SL strings complete the GB-Fusion 5.
Cort Guitars prides itself on creating inventive instruments musicians love to play. The GB-Fusion Bass Series is the latest and greatest for musicians looking for a stellar bass guitar that is not only economical, but has the reliable robust sound needed to hold up the back end in any playing situation.
GB-Fusion 4 Street Price: $699.99
GB-Fusion 5 Street Price: $849.99
For more information, please visit cortguitars.com.
Here’s a look under the hood of the funky rhythm-guitar master’s signature 6-string.
Hello and welcome back to Mod Garage. Since we’re still celebrating the 70th birthday of the Stratocaster, this month we will have a look under the hood of the Fender Cory Wong model to see just what’s so special about it. (I can tell you—it’s special!)
Guitarist, songwriter, and producer Cory Wong is renowned for his solo work, his band Fearless Flyers (with Mark Lettieri, Joe Dart, and Nate Smith), and collaborations with artists such as Vulfpeck, Jon Batiste, and Dave Koz. His playing style is deeply rooted in funk rhythm guitar, with a heavy dose of rock and jazz. Well-known for playing a Stratocaster, his signature model was released in 2021, and it’s a unique offering. If you want to build your personal Cory Wong Strat, here is your shopping list, starting with the primary structure:
• Alder body, scaled down to slightly smaller than a regular Stratocaster, with Fender American Ultra body contours
• Maple neck with a rosewood fretboard with rolled edges, modern Fender American Ultra D neck profile, slightly larger headstock, 25.5" scale, 10" to 14" compound radius, 22 medium jumbo frets
• Locking tuners with all short posts, a bone nut, and two roller string trees
• Vintage-style 6-screw synchronized tremolo
• Hair tie around the tremolo springs (which mutes them to enhance the rhythm tone)
• .010–.046 strings (nickel-plated steel)
“While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat.”
For the physical build, as you can see, Wong and Fender created a real signature instrument to his specs and wishes. While these are all interesting features, resulting in a very comfortable guitar, you don’t need to copy every detail to transform one of your Stratocasters into a Cory Wong-style Strat. My personal favorite of these is the hair tie for muting the tremolo springs. A lot of my funk-playing customers are doing similar things on their Strats to get a dry sound, and they’re using all kinds of funny things in there, like foam, rubber bands, and pieces of cotton, as well as hair ties.
Now, let’s have a look at the electronics:
• Seymour Duncan Cory Wong Clean Machine SSS pickup set
• Standard 5-way pickup-selector switch with classic Strat switching matrix
• 250k master volume pot with a 90/10 audio taper and Fender treble-bleed circuit PCB
• 250k tone pot with a 90/10 audio taper and Fender Greasebucket tone control PCB for only the neck pickup
• 250k audio push-push tone pot with Fender Greasebucket tone control PCB for only the bridge pickup; the push-push switch overrides the 5-way switch and defaults to middle + neck pickup (in parallel) as a preset
• Middle pickup is without tone control
Let’s break this down piece-by-piece to decode it:
Pickups
The pickup set is a custom SSS set from the Seymour Duncan company with the following specs:
• Overwound hum-canceling stacked bridge pickup with a 3-conductor wire and shield in permanent hum-canceling mode (red wire taped off), bevelled alnico 5 magnets, approximately 14.5k-ohm DCR
• Overwound middle single-coil, RWRP, beveled alnico 4 magnets, approximately 7.1k-ohm DCR
• Overwound neck single-coil, bevelled alnico 4 magnets, approx. 7.0k-ohm DCR
The pickups are voiced for clear highs, which perfectly suits Wong’s funky playing style and tone. While a lot of pickup companies will have pickups in that ballpark, it will be difficult to put together a full set that really works as intended. The Duncans in the Cory Wong Strat are available as a balanced set, so if you want to get as close as possible, I think this is your best bet.
5-Way Pickup Selector Switch
Nothing special here, just the standard 5-way switch with two switching stages that is wired like a classic Stratocaster:
bridge
bridge + middle in parallel
middle
middle + neck in parallel
neck
The upper tone pot is assigned to the neck pickup, while the lower tone pot is connected to the bridge pickup, leaving the middle pickup without tone control.
Master volume pot and treble-bleed circuit.
The 250k master volume pot is a standard CTS pot with a 90/10 audio taper found in all U.S.-made Fender guitars. The volume pot has the treble-bleed circuit from the Fender American Pro series, but uses a ready-to-solder PCB from Fender instead of individual electronic parts. The PCB is available from Fender individually (part #7711092000), but I have some thoughts about it. While using a PCB makes a lot of sense for mass production, it has some downsides for us mortal human beings:
• Soldering on PCBs requires some training and also special soldering tools.
• The PCB is quite expensive, while the individual electronic parts are only a few cents.
• The PCB uses ultra-tiny surface-mount parts, so it’s very difficult to repair or mod it to your personal taste.
I don’t think we need a PCB for adding a treble-bleed circuit, so let’s do this project using conventional electronic parts. The treble-bleed PCB contains a 1200 pF capacitor with a 150k-ohm resistor in parallel, plus another 20k-ohm resistor in series. Using individual parts, it looks like this:
Courtesy of single-coil.com
In general, a treble-bleed circuit will help you to combat the “volume vs. tone problem” when using passive single-coil pickups. When you turn down the volume (even just a bit), the high end or treble loss is not proportionate. In other words, a small cut in volume creates a far greater loss in your guitar’s treble response. Using a treble-bleed circuit is an easy way to get rid of this problem, as long as it is calculated carefully.
ONLINE ONLY: If you want to find out more about treble bleed circuits please have a look here: https://www.premierguitar.com/diy/mod-garage/treble-bleed-mod
Next month, we will continue with part two of the Cory Wong Stratocaster wiring, bringing it all together, so stay tuned!
Until then ... keep on modding!