Other new models include a fanned-fret model in 5- and 6-string versions.
Bensalem, PA (February 23, 2015) -- Ibanez released several new basses at the Winter NAMM show.
Black Eagle 2609B Reissue
Itās a rare instance when the bass builders at Ibanez re-visit the companyās history. But even for the very forward-thinking Ibanez design team, the 40th anniversary of the legendary Black Eagle bass was too important a milestone to ignore. Hereās a limited edition re-issue that opens the door to an alternate universe circa 1975.
The first head-turner is mahogany body with its sharp inward-turned cutaways, along with its gracefully shaped F-hole headstock, which sets the stage for this Black Eagle re-issue to brim with 70s-era cool. Its Maple fretboard boasts an intricate custom inlay, but the decorative pièce de résistance is most certainly the white-on-black Abolone eagle that lives near the lower horn.
LIST: $599.99
BTB33NTF
The mission of the Ibanez Bass Workshop is to pioneer new frontiers in bass development by pushing the boundaries of conventional designs. The impetus behind each one of these unique instruments comes from the desire of the Ibanez bass development group to satisfy the specific needs of a very particular player and to hopefully inspire new vistas of creativity.
Designed for players looking to explore the upper region of the fretboard, the BTB33NTF is a 5-string bass is factory tuned from E to C. Excellent for playing chords and soloing up into baritone territory, this 5-piece Maple/Bubinga neck helps to create the proper tension and tonal quality for the C string without compromising the deep tone of the E string. It also facilitates faster playing and easier chording.
Another innovative feature of the BTB33NTF is the inclusion of a height adjustable Rosewood Finger Ramp. The ramp prevents players from digging in too hard when plucking finger-style and encourages a lighter playing technique, which helps promote a broader dynamic range and better tone. It also acts as a thumb rest that provides access to a wider plucking area, allowing players to explore more tonal options by varying the distance of their hand from the bridge.
The BTB33NTF includes a Mahogany with an Ash top, the neck sports a Rosewood fingerboard with Abalone inlays and a Mono-Rail V bridge provides optimum adjustment for superior intonation. Electronics feature the excellent tone of Bartolini BH1-5 pickups through an Ibanez 3-band EQ with a mid frequency selector switch for advanced tone control.
List: $1377.76
SR1406TEVNF
The new Ibanez SR1406TEVNF is a stylish 6-string bass that boasts āneck-throughā construction for the optimum in tone, sustain and stability. As part of the Ibanez Premium line, it delivers "Performance Beyond Expectation" at pricing friendly to the working musician.
The SR1406TEVNF begins with a beautiful figured Maple top/Mahogany body combination that produces a robust, full-balanced tone. The Vintage Natural Flat finish allows the body to resonate more freely and creates an understated look of elegance. The 5-piece Wenge/Bubinga Atlas-6 neck features āneck-throughā construction, which runs from the top of the headstock down to the lower strap pin. This design increases sustain, improves tuning stability and allows unfettered access to the even highest frets. Thanks to the Premium Fret Edge Treatment, super-smooth, hand-crimped medium frets on a Rosewood fretboard with oval Abalone inlay, this handsome bass is as enjoyable to play, as it is to look at. String vibration and sustain are also optimized by the innovative Mono-Rail IV bridge for the most precise intonation.
For electronics, the SR1406TEVNF comes loaded with two Nordstrand āBig Singleā passive pickups. Additional sound shaping is provided by an Ibanez 3-band Active EQ with EQ bypass switch and mid-frequency switch.
List: $2,066.65
SRFF805BKS and SRFF806BKS Ibanez is proud to introduce the first-ever production model fanned-fret basses: the five-string SRFF805BKS and the six-string SRFF806BKS. Introduced in 1989, the fanned fret system is a revolutionary concept designed to create a better sounding, better playing bass. Previously, fanned fret instruments were available only to those who could afford the high-priced boutique instruments from private luthiers. Now, as part of their Premium Instrument line, Ibanez makes this unique, high-quality instrument available to the working musician.
Built at the Ibanez Premium Production Facility, the SRFF805 and 806 each consists of an Ash body attached to a 5pc Jatoba/Bubinga SR neck with a Rosewood fretboard, Medium frets and Acrylic custom fanned inlays. The innovative Mono-Rail V Bridge system was decided as the perfect match for a fan-fret instrument, allowing for independent positioning of each stringās bridge piece to provide excellent intonation and superior vibration transference. Electronics include Bartolini BH1 pickups, for a thick, punchy, full-range of tone, and a 3-band EQ w/ Bypass switch and Mid-Frequency switch for complete sonic control.
The goal of the fanned-fret system is to even the tension of each string. Equalized tension helps to create a more āalive,ā open tone. On the SRFF805/806, the scale length is 34ā on the highest pitch string side, expanding to 35.5 at the low B. The slant of the fanned-frets ergonomically coordinate with the way a players hand angles as it moves up and down the neck, facilitating quick, comfortable playing action. The result is better tone, expanded harmonic complexity and improved playability across all five strings.
SRFF805BKS List: $1,333.32
SRFF806BKS List: $1,399.99
Reflecting a classic Ibanez body style, the Talman Bass Series sports a cool retro look with a sound that will inspire players of all ages.
The TMB300 delivers a one-two punch by combining a passive P/J pickup configuration with a retro Ibanez body design. Features include a Mahogany body, Maple neck, Standard bridge, bound Rosewood fretboard with Block inlays and a tortoise shell pickguard for a stylish, finished look. Electronics consist of a Custom 2-band Active EQ with an Ibanez DXP neck pickup and a DJ2 double J bridge pickup for extra punch. A Split Coil Switch provides a single coil option in the bridge position for heightened definition.
The TMB100 also combines a passive P/J pickup configuration with the Ibanez-retro Talman body style. Features include a Mahogany body, a Maple neck, Rosewood fretboard with dot inlay, a Standard bridge and a tortoise shell pickguard. Electronics consist of an Ibanez DXP neck pickup and a DXJ bridge pickup and a Custom 2-band active EQ for increased tonal options.
TMB300 List: $428.56
TMB100 List: $258.70
For more information:
Ibanez
Do you overuse vibrato? Could you survive without it?
Vibrato is a powerful tool, but it should be used intentionally. Different players have different stylesāB.B. Kingās shake, Claptonās subtle touchābut the key is control. Tom Butwin suggests a few exercises to build awareness, tone, and touch.
The goal? Find a balanceādonāt overdo it, but donāt avoid it completely. Try it out and see how it changes your playing!
The author dials in one of his 20-watt Sonzera amps, with an extension cabinet.
Knowing how guitar amplifiers were developed and have evolved is important to understanding why they sound the way they do when youāre plugged in.
Letās talk about guitar amp history. I think itās important for guitar players to have a general overview of amplifiers, so the sound makes more sense when they plug in. As far as I can figure out, guitar amps originally came from radiosāalthough Iāve never had the opportunity to interview the inventors of the original amps. Early tube amps looked like radio boxes, and once there was an AM signal, it needed to be amplified through a speaker so you could hear it. Iām reasonably certain that other people know more about this than I do.
For me, the story of guitar amps picks up with early Fenders and Marshalls. If you look at the schematics, amplifier input, and tone control layout of an early tweed Fender Bassman, itās clear thatās where the original Marshall JTM45 amps came from. Also, Iāve heard secondhand that the early Marshall cabinets were 8x12s, and the roadies requested that Marshall cut them in half so they became 4x12s. Similarly, 8x10 SVT cabinets were cut in half to make the now-industry-standard 4x10 bass cabinets. Our amp designer Doug Sewell and I understand that, for the early Fender amps we love, the design directed the guitar signal into half a tube, into a tone stack, into another half a tube, and the reverb would join it with another half a tube, and then there would be a phase splitter and output tubes and a transformer. (All 12AX7 tubes are really two tubes in one, so when I say a half-tube, Iām saying weāre using only the first half.) The tone stack and layout of these amps is an industry standard and have a beautiful, clean way of removing low midrange to clear up the sound of the guitar. I believe all but the first Marshalls came from a high-powered tweed Twin preamp (which was a 80-watt combo amp) and a Bassman power amp. The schematic was a little different. It was one half-tube into a full-tube cathode follower, into a more midrange-y tone stack, into the phase splitter and power tubes and output transformer. Both of these circuits have different kinds of sounds. Whatās interesting is Marshall kept modifying their amps for less bass, more high midrange and treble, and more gain. In addition, master volume controls started being added by Fender and Marshall around 1976. The goal was to give more gain at less volume. Understanding these circuits has been a lifelong event for Doug and me.
Then, another designer came along by the name of Alexander Dumble. He modified the tone stack in Fender amps so you could get more bass and a different kind of midrange. Then, after the preamp, he put in a distortion circuit in a switchable in and out āloop.ā In this arrangement, the distortion was like putting a distortion pedal in a loop after the tone controls. In a Fender amp, most of the distortion comes from the output section, so turning the tone controls changes the sound of the guitar, not the distortion. In a Marshall, the distortion comes before the tone controls, so when you turn the tone controls, the distortion changes. The way these amps compress and add harmonics as you turn up the gain is the game. All of these designs have real merit and are the basis of our modern tubeāand then modelingāamplifiers.
Everything in these amps makes a difference. The circuits, the capacitor values and types, the resistor values and types, the power and output transformers, and the power suppliesāincluding all those capacitor values and capacitor manufacturers.
I give you this truncated, general history to let you know that the amp business is just as complicated as the guitar business. I didnāt even mention the speakers or speaker cabinets and the artform behind those. But whatās most important is: When you plug into the amp, do you like it? And how much do you like it? Most guitar players have not played through a real Dumble or even a real blackface Deluxe Reverb or a 1966 Marshall plexi head. In a way, youāre trusting the amp designers to understand all the highly complex variations from this history, and then make a product that you love playing through. Itās daunting, but I love it. There is a complicated, deep, and rich history that has influenced and shaped how amps are made today.
Lenny Kravitzās lead-guitar maestro shares how his scorching hit solo came together.
Hold onto your hatsāShred With Shifty is back! This time, Chris Shiflett sits down with fellow west coaster Craig Ross, who calls in from Madrid equipped with a lawsuit-era Ibanez 2393. The two buddies kick things off commiserating over an increasingly common tragedy for guitarists: losing precious gear in natural disasters. The takeaway? Donāt leave your gear in storage! Take it on the road!
Ross started out in the Los Angeles band Broken Homes, influenced by Chuck Berry, Buddy Holly, and the Beatles, but his big break came when he auditioned for Lenny Kravitz. Kravitz phoned him up the next day to tell him to be at rehearsal that evening. In 1993, they cut one of their biggest hits ever, āAre You Gonna Go My Way?ā Ross explains that it came together from a loose, improvisatory jam in the studioātestament to the magic that can be found off-leash during studio time.
Ross recalls his rig for recording the solo, which consisted of just two items: Kravitzās goldtop Les Paul and a tiny Gibson combo. (No fuzz or drive pedals, sorry Chris.) As Ross remembers, he was going for a Cream-era Clapton sound with the solo, which jumps between pentatonic and pentatonic major scales.
Tune in to learn how he frets and plays the songās blistering lead bits, plus learn about what amps Ross is leaning on these days.
If youāre able to help, here are some charities aimed at assisting musicians affected by the fires in L.A:
https://guitarcenterfoundation.org
https://www.cciarts.org/relief.html
https://www.musiciansfoundation.org
https://fireaidla.org
https://www.musicares.org
https://www.sweetrelief.org
Credits
Producer: Jason Shadrick
Executive Producers: Brady Sadler and Jake Brennan for Double Elvis
Engineering Support by Matt Tahaney and Matt Beaudion
Video Editor: Addison Sauvan
Graphic Design: Megan Pralle
Special thanks to Chris Peterson, Greg Nacron, and the entire Volume.com crew.
Tobias bass guitars, beloved by bass players for nearly half a century, are back with the all-new Tobias Original Collection.
Built for unrivaled articulation, low-end punch, and exceptional ergonomics, the all-new Tobias Original Collection comprises an array of six four and five-string bass models all offered in both right and left-handed orientations. The Tobias range features Classic, Killer B, and Growler models, and each is equipped with high-quality hardware from Babicz and Gotoh, active electronics from Bartolini, and the iconic Tobias asymmetrical neck design. Crafted from the finest tonewoods, Tobias Original Collection bass guitars are now available worldwide on Gibson.com, at the Gibson Garage locations, and at authorized Gibson dealers.
The bass world has been clamoring for the return of the authentic, high-end Tobias basses, and now, Tobias has returned. Combining the look and tone of the finest exotic tonewoods, such as quilted maple, royal paulownia, purpleheart, sapele, walnut, ebony, and wenge, with the feel of the famous Tobias Asym asymmetrical neck and the eye-catching shapes of the perfectly balanced contoured bodies, Tobias basses are attractive in look and exceptional in playing feel. However, their sonic versatility is what makes them so well suited to the needs of modern bassists. The superior tone from the exotic hardwoods, premium hardware, and active BartoliniĀ® pickups and preamps results in basses with the tonal flexibility that todayās players require. Donāt settle for less than a bass that delivers everything you want and need āthe look, the feel, and the sound, Tobias.
āIām thrilled to release Tobias basses, emphasizing the use of exotic woods, ergonomics, and authenticity to the original Tobias basses,ā says Aljon Go, Product Development Manager for Tobias, Epiphone, and Kramer. āThis revival is a dream come true, blending modern craftsmanship with the timeless essence of Tobias.ā
āItās amazing to see this icon of the bass world return,ā adds Andrew Ladner, Brand Manager for Epiphone and Kramer. āThese models are truly a bass playerās bass, and true to the DNA that makes Tobias world-classāthe ace up the sleeve of bass players around the globe since 1978. Todayās players can find that unique voice and feel that only Tobias can offer.ā
For more information, please visit gibson.com.