The bass lord morphs and mutates between rhythm and lead parts with a hearty Wal 4-string, Gallien-Krueger crushers, and a pedalboard that could make Adam Jones jealous.
“Will the next Tool album take more than 10,000 days?”
That was an ongoing (and agonizing) joke for Tool fans that awaited the band’s fifth album following the release of 2006’s 10,000 Days. (A cruel clairvoyance of a title.) For those counting, when Fear Inoculum was finally delivered on August 30, 2019, it was just 4,868 days from their previous album. All crummy jokes aside, the anticipation of the album was real for a reason: the music. And the rhythmic cog of their constant contorting of depth and darkness is bassist Justin Chancellor.
Sure, drummer Danny Carey is a living legend bashing everything his large frame can smash and crash. Adam Jones transforms his guitar into a Hans Zimmer production with varied textures, temperaments, and traits his tone expresses. During shows, singer and lyricist Maynard James Keenan prowls in the shadows adding to the band’s musical mysticism. This triumvirate core dished out the punishing EP Opiate in 1992, and their 1993 debut full-length Undertow was more complex and calculated in its rage. But in 1995, when Justin Chancellor replaced Paul D’Amour on bass, Tool immediately expanded their dimensionality. The original three continued to dazzle and dumbfound listeners, but the addition of Chancellor and his pocket-minded role unlocked a collective vocabulary previously unspoken. Simply put, if Tool was an octopus, Chancellor was the head. The others could be momentarily independent tentacles exploring the melodic murkiness of their respective reaches, but when they needed to propel forward, Chancellor was steering. His lines are the base for the band’s groove and attitude that became a focal point on subsequent releases with 1996’s Ænima, 2001’s Lateralus, 2006’s 10,000 Days, and eventually 2019’s Fear Inoculum. The former three went triple-platinum, while the latter three were No. 1 on the Billboard 200. (Ænima landed in the No. 2 spot.)
If you ever catch yourself playing air guitar to Tool, you’re probably mimicking Chancellor’s parts. “Schism,” “The Pot,” “Forty Six & 2,” “H.,” “Fear Inoculum,” “Descending,” “The Grudge,” and plenty of others feature his buoyant bass riffs.
Chancellor’s tone has had a longstanding relationship with Wal basses, Gallien-Krueger amps, and Mesa/Boogie cabs. The evolving part of his rig has been his pedalboard. At this juncture of the band’s run supporting Fear Inoculum, Chancellor’s board is larger than his guitar-playing counterparts. Yet everything has a place and purpose. Some of it is duplicity, some of it is to avoid any required knob-turning during the show, and as we find out in the Rundown, some of it is just for fun. Grab a seat and get comfortable as Chancellor and his tech Pete Lewis walk PG’s elated Chris Kies through his live setup.
Brought to you by D’Addario: https://ddar.io/wykyk-rr
and D’Addario XPND Pedalboard: https://www.daddario.com/XPNDRR
Like a Glove
While recording Ænima, Chancelor borrowed a friend’s Wal bass that was originally fretless, but his pal did the dirty work of embedding frets into it. “That original bass’ tone immediately fit in with the band and covered the right area of sound,” remembers Chancellor. He promptly ordered his own replica of that build, and this is the second edition of it. The above 4-string has been his main bass for the last 15 years. It has a mahogany core, bird’s-eye maple caps, a neck incorporating mahogany, maple and rosewood, and a rosewood fretboard. Some minor changes to improve comfort and playability include lighter hardware and Luminlay fret markers. Chancellor’s basses take a custom set of Ernie Ball Hybrid Slinky Bass strings that have the standard .045-.065-.85, but because they tune down to drop-D for most songs, he swaps in a .110 from the Power Slinky pack. And when they go to drop-C for their oldest material, he’ll put on a .135 string. He hammers on the strings with a custom Dunlop (1 mm) Tortex Tri pick. All his instrument cables come from Mogami.
Full-Circle StingRay
Chancellor recalls auditioning for Tool with an Ernie Ball StingRay, but it just didn’t work with the band’s sound at the time. Fast forward two decades and the StingRay has found a cozy place in the Tool setlist. The 2018 Music Man StingRay Special is used on “Descending” from Fear Inoculum. Anyone keen on details will notice the high-tech solution of duct tape and marker that allows Justin to incrementally notch up the volume during the song’s blossoming midsection.
Pretty Practice P
Justin scooped this beautiful 1963 Fender P bass from Norm’s Rare Guitars. He does have a small collection of old instruments, but they have to meet two requirements before he makes the buy: They have to sound amazing and they have to be players so he can “bang away on them” without remorse. He doesn’t play it onstage (the vintage P’s output doesn’t have enough horsepower for Tool), but he does bring it on tour because he finds it inspirational to play, so it’s often with him backstage, on the bus, or in the hotel room.
Welcome to the Thunderdome!
This configuration of Demeter preamps and Gallien-Krueger power amps has been the nucleus of power for Justin’s studio and stage sound for years. The Gallien-Krueger 2001RB heads each hit their own cabinet. The “clean” RB runs into a Mesa/Boogie RoadReady 8x10. The middle RB head in the rack is the “dirty” amp that goes into a prototype Mesa/Boogie 4x12 that is EQ’d gnarlier and takes all of Chancellor’s pedals. He feels the 10" speakers retain the integral low-end bass tone better than the 12s, while the larger speakers are better suited for offering his distorted or effected tones an overall warmth that can disappear in the 10s. (The bottom 2001RB is on deck in case either head fails.)
Above the G-Ks are the Demeter Bass Tube Preamplifiers that give FOH a pure sound to mix in as needed. (The second Demeter unit is a backup.)
And up to the Radial JD7 Injectors are amp switchers that also help remove noise, signal loss, or hum and buzz.
Mesa Mountains
Here are the two Mesa/Boogie cabs—the 8x10 on the left and the custom prototype 4x12 on the right.
Justin Chancellor's Pedalboard
This setup is either a bass player’s dream or nightmare, but for someone as adventurous as Chancellor, this is where the party starts. At a glance, you’ll notice many of his pedals are available at your favorite guitar store, including six Boss boxes, an Ernie Ball Volume Pedal, and MXR Micro Amp. Crucial foot-operated pedals are in blue with the Dunlop JCT95 Justin Chancellor Cry Baby Wah with a Tone Bender-style fuzz circuit (far left) and DigiTech Bass Whammy (middle). He really likes using the Tech 21 SansAmp GT2 for distortion and feedback when the Whammy is engaged or he’s playing up the neck. Covering delays are three pedals—he has the pink Providence DLY-4 Chrono Delay for “Pneuma” that is programmed to match Danny’s BPMs, which slightly increase during the song from 113 ms to 115 ms. The Boss DD-3s are set for different speeds with the one labeled “Faster” handling “The Grudge” and the other one doing more steady repeats. There’s a pair of vintage Guyatone pedals—the Guyatone VT-X Vintage Tremolo Pedal (Flip Series) and Guyatone BR2 Bottom Wah Rocker (a gift from Adam Jones). The Gamechanger Audio Plus pedal is used to freeze moments and allow Justin to grab onto feedback or play over something. The Boss GEB-7 Bass Equalizer and Pro Co Turbo Rat help reinforce his resounding, beefy backbone of bass tone. The MXR Micro Amp helps goose his grimy rumbles. The Boss LS-2 Line Selector is a one-kick escape hatch out of the complicated signal chain for parts of “Schism.” The Wal and Music Man stay in check with the TU-3S tuner, a pair of Voodoo Lab Pedal Power 2 Pluses help bring things to life, and everything is wired up with EBS patch cables.
Shop Justin Chancellor's Rig
Music Man StingRay Special HH
Dunlop JCT95 Justin Chancellor Cry Baby Wah
Gamechanger Audio Plus Pedal
Boss DD-3 Digital Delay
Boss BF-2 Flanger
Boss CE-5 Chorus Ensemble
Boss GEB-7 Bass Equalizer
ProCo Turbo Rat
Tech 21 SansAmp GT2
DigiTech Bass Whammy
MXR Micro Amp
Boss LS-2 Line Selector
Ernie Ball VP Junior 250K
Boss TU-3S Tuner
JHS Switchback A/B Effects Loop Switcher
Voodoo Lab Pedal Power 2 Plus
Radial JD7 Injector
- Gibson and Tool's Adam Jones Collaborate on Signature 1979 Les Paul Custom ›
- How to Riff Like Tool’s Adam Jones ›
- Dunlop JCT95 Justin Chancellor Cry Baby Wah Review ›
- Failure’s Monster Comeback ›
- Emotional Tool & Pantera Rig Rundowns: Ed Sheeran Looper, New PRS, Peavey Revealed ›
- Justin Chancellor's #1 Wal Bass Guitar for Tool ›
We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
In the early ’60s, some of the British guitarists who would shape the direction of our instrument for decades to come all found themselves at a concert by Sister Rosetta Tharpe. What they heard from Tharpe and what made her performances so special—her sound, her energy—must have resonated. Back at home in the U.S., she was a captivating presence, wowing audiences going back to her early days in church through performing the first stadium rock ‘n’ roll concert—which was also one of her weddings—and beyond. Her guitar playing was incendiary, energetic, and a force to be reckoned with.
On this episode of 100 Guitarists, we’re joined by guitarist Molly Miller, who in addition to being a fantastic guitarist, educator, bandleader, and performing with Jason Mraz, is a bit of a Sister Rosetta scholar. We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
Featuring the SansAmp section, Reverb/Delay/Roto effects, and OMG overdrive, with new additions like a switchable Pre/Post Boost and Effect Loop. Pre-configured for the RK Killer Wail wah, this pedal offers versatile tones and unmatched flexibility.
Since the debut of the original RK5 in 2014, Richie’s needs have changed, both on and off the road. The RK5 v3 retains the same SansAmp section, Reverb/Delay/Roto section, and Richie’sSignature OMG overdrive. New features include a switchable Pre/Post Boost to beef up drive and distortion or increase the overall volume to punch up fills and solos, along with the addition of an Effect Loop. It has also been pre-configured to provide phantom power for Richie’s Tech21 Signature RK Killer Wail wah.
The all-analog SansAmp section of the RK5 focuses on clean tones within the tube amplifier sound spectrum. It includes 3-band active EQ, and Level and Drive controls. To dirty things up, you have the flexibility of using the Drive control, and the Boost function, or you can add overdrive from the OMG section. Or all three. Each method achieves different tones. The OMG section is based upon the Richie Kotzen Signature OMG pedal, which provides a wide range of overdrive, from clean to aggressive. You can add personality to a clean amp or use it for extra punch with a dirty amp tone. Controls include Drive for the overall amount of gain and overdrive and Tone with specialized voicing for adjusting the high-end and mid-range. A Fuzz switch changes the character and attack of the overdrive to a fuzz-style tone, making it thicker and woolier.
Other features include an independent foot-switchable Reverb witha choice of large and small“room sizes;” Tap Tempo Delay, which can be transformed into a rotating speaker effect; included Tech 21 Model #DC9 universal self-adjusting 9V DC power supply, with interchangeable international prong assemblies for use anywhere in the world. Anticipated availability: January 2025
For more information, please visit tech21nyc.com.
OM-balance and comfort suited for the fingerstylist on a budget.
Comfortably, agreeably playable. Balanced dimensions. Nice fretwork.
Lighter mahogany top looks less classically mahogany-like. Some compressed sounds in heavy-strumming settings.
$299
Guild OM-320
guildguitars.com
The Premier Guitar crew is spoiled when it comes to hanging out with nice flattops. But while those too-brief encounters with acoustics we can’t afford teach us a lot about the flattop at its most refined, they also underscore a disconnect between the cost and the acoustic guitar’s status as a true folk instrument of the people.
Guild’s OM-320, from the company’s new 300 series, sells for $299, which isn’t much more than a good-quality, entry-level flattop cost in the 1980s. Strikingly, there’s a lot of competition in this price class. Even so, the OM-320’s nice build quality and pretty tone in fingerpicking applications stand out in a very crowded price segment.
The United Guild of Deal-Seeking Pickers
Though Guild, in all its incarnations, has always made accessible guitars a part of their offerings, a $300 instrument with the company’s logo might give pause to players familiar with guitars from their various U.S. factories. Quality can be hit-or-miss on any guitar from any brand at the entry level. What’s more, a lot of guitars with different brand names come from just a few OEM facilities—lending a certain sameness on top of irregular quality. But the recent acquisition of Guild by Yamaha, who has a reputation for solid entry-level instruments, inspires confidence as far as these concerns go.
So, too, does the integrity of the OM-320 at the nuts-and-bolts level. I couldn’t find any overt lapses in quality control. And in many spots where that really counts, like the fretwork, the execution is especially good. Little details like the Guild logo overlay (rather than a simple decal) add a soupçon of luxury. So do the Guild-branded, Grover Sta-Tite-style butterbean tuners, which look stylish and feel sensitive and accurate.
“The neck inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue.”
Though the body is built from layered mahogany on the back and sides and a solid mahogany top, the latter is much lighter and amber- or honey-toned than the rich cocoa-hued mahogany tops you’d associate with a vintage Guild M-20, or, for that matter, theM-120 from the company’s contemporary Westerly line. As a result, you see a little more contrast in the grain and a little dimpling in certain sections of the wood. The lighter wood isn’t unattractive, it just looks less trad, if you’re chasing Nick Drake’s Bryter Layter style. If that’s important, you should adjust the “design/build” score appropriately.
Sit and Stay Awhile
Barring being covered in porcupine spines, almost any OM or 000 will qualify as a pure-comfort title finalist. It’s not too thick, too wide, nor too petite—a size and profile that also pays unique, civilized sonic dividends. Here, the OM body is complimented by a neck that feels like an especially natural match. I don’t have a bunch of inexpensive OMs on hand to compare, and there isn’t anything wildly unique about the shape, but the neck profile feels very proportionate to the body. It also, depending on your own sense of such things, inhabits a comfortable zone between C and D shapes that’s super agreeable and, at least in my case, a nice antidote for hand fatigue. The neck is not classically OM-like in terms of nut width. The M-320’s nut measures 1 13/16", which is typical of a 000, rather than the 1 3/4" associated with OMs. The extra width, of course, would make the guitar more appealing to some fingerstylists that need the space. At no point, however, did I feel anything close to cramped; it’s just very comfortable.
The combination of layered back and sides, OM/000 dimensions, and mahogany mean the OM-320 feels and sounds less than super-widescreen in terms of tone spectrum and power. Nevertheless, it sounds balanced and pretty—particularly with a droning, dropped 6th string and other more-elastic tunings where the guitar can exercise the lower extremes of its voice. Tuning to standard has the effect of highlighting midrange emphasis, which can get boxy and render the 3rd and 4th strings a bit less potent and present. That said, it’s still balanced and almost never collapses into a distorted harmonic blur. The bottom end maintains an appealing growl and, as long as you use a gentler picking approach, you can use the highest four strings in very dynamic ways. Using a capo emphasizes other cool, high-mid-focused voices in the guitar that coexist well with most strumming approaches.
The Verdict
Inexpensive guitars that feel great can make up for a lot of shortcomings in tone. But the OM-320’s deficiencies in the latter regard are few, and some perceived limitations, like midrange emphasis, are intrinsic to guitars with OM dimensions. So, while forceful strumming is not the OM-320’s strength, the comfortable playability might just lead you to those places anyway. And if you compensate accordingly with touch dynamics, you can conjure many sweetly chiming tones that might sound extra sweet given the bargain price
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.