A pair of overdrives with vintage aesthetics and tones to match.
Rugged build. Sweet saturation.
Can sound ragged around the edges at high gain.
$149
Warm Audio Warmdrive
warmaudio.com
Many recording enthusiasts know Warm Audio for their well-regarded and affordable takes on otherwise unattainable classic studio microphones, preamps, and processors. Most of these imitate the handsome aesthetics of those units along with their functionality, which adds to the allure. Warm Audio ventured into pedal building a few years back with lovingly rendered versions of the Roland Jet Phaser and Foxx Tone Machine. This time out, though, they’ve taken on two less obscure pedals, the Lovepedal/Hermida Zendrive and Klon Centaur, in the form of the Warmdrive and Centavo, respectively.
Some of the language Warm Audio uses to describe the Warmdrive and Centavo pedals—like “accurate recreation” and “true reproduction”—is bound to raise eyebrows among circuit snobs. Yet both pedals are ruggedly built. Plenty of attention is paid to the cosmetic details. Both circuits are put together using sturdy through-hole boards and populated with reputable components. And there’s a general air of quality about them, both inside and out, that promises real road reliability which should squash a lot of the chagrin from naysayers.
In some ways, the company’s decision to build clones of two pedals that have been copied many times over is a curious one. But Warm Audio’s attention to aesthetic details will no doubt entice cost-conscious enthusiasts chasing both the sound and visual cachet attached to these historically important effects.
Warmdrive
The original Zendrive was created by Alfonso Hermida in the mid ’00s as an attempt to re-create Robben Ford’s hallowed Dumble-driven lead tones in an overdrive pedal. That remains a lofty goal. But many players agree that Hermida succeeded just about as well as one could. The results were good enough for Ford himself, who frequently uses a Zendrive with non-Dumble amps (often a Fender Twin Reverb).
The Warmdrive control layout is identical to that of the Zendrive, and includes gain, volume, tone, and voice knobs. The latter is a versatile control that moves the pedal’s overall character between dark and bright tones in a more expansive way than you experience using a typical high- or low-pass-filter-based tone knob. Signal-sweetening gubbins include 1N34A germanium diodes, 2N7000 MOSFETs, and an NE5532 op-amp. The steel enclosure and true-bypass switch feel more than solid enough to survive repeated stomping. The cosmetics, in typical Warm Audio fashion, imitate the original.
Dum Dum Drive
With a Gibson Les Paul, Fender Telecaster, ’66 Fender Princeton combo, and 65amps London head and 2x12 cab, the Warmdrive was a fast track to the kind of Dumble-y, creamy saturation that’s kept players drooling through the decades. I suspect even cynics will be smiling when they slide into sustain-driven fusion improvs.
The Warmdrive is a thick, chewy overdrive at heart, but moves easily from smooth and warm to crisp and crackling, depending on where you set the voice knob. And there’s lots of room to fine-tune further using the tone control. There’s also plenty of range in the gain and level controls, which makes the pedal capable of much more than full-on lead tones. It’s a surprisingly good low-gain drive as a result. Even so, the real treats are in the near pedal-to-the-metal settings. Setting the gain around 2 o’clock, the volume around 11 o’clock, and tone and voice pretty close to noon makes a sound I could truly get lost in. I didn’t think about its Dumble-imitating origins, or how it sounded compared to a Dumble, or for that matter a Zendrive. I just knew it sounded great. If you want to feel like Robben Ford for a few minutes, this is an easy way to get there.
Centavo
Cloning a pedal that’s unavailable in its original form (and prohibitively costly when you find one) is generally a service to the guitar community. In the case of the Klon, however, there are enough klones, and hype around them, that the addition of yet another will probably induce a few eye rolls. That said, the ongoing, often raging, debate over which klone clones the Klon best, indicates there’s still room for anyone that wants to take a shot at building a better, more accurate one.
To date, only one klone I know of comes in an accurate die-cast enclosure like the box that houses the Centavo: the well-regarded Centura from Ceriatone Amplification of Malaysia. So, Warm Audio’s insistence on vintage accuracy will be a boon for players seeking the original’s handsome look at a fair price. The 6.75" x 5" x 2.25" dimensions, though, mean itmight be less appealing to those eager to conserve real-estate on crowded boards.
Elsewhere, Warm Audio chased authenticity pretty relentlessly. Like the original, the Centavo uses buffered bypass, TL072 op-amps, and a charge-pump voltage regulator. The oxblood pointer knobs for gain, treble, and output are another nice vintage touch that looks great. Warm Audio did take one very practical liberty with original design in the form of a MOD switch, which is situated between the input and output on the pedal’s crown and extends the circuit’s low-end response.
Chasing Mythical Beasts
Tested via the same guitars and amps used for the Warmdrive evaluation, the Centavo provides many reminders of why the original Klon became so beloved in the first place. For me, at least, the tastiest function, just as on the original, is when it’s used as a near-clean or just slightly dirty boost. Even at unity gain it sounds excellent, which is apparent just as soon as you turn it off. If the Centavo had a photo filter equivalent, it would be one that illuminates everything with golden-hour light. Everything you hear is essentially the same—just somehow more magical.
When you wind up the gain for a more lead/overdrive setting, the Centavo doesn’t disappoint. It can sound a touch furry and woofy at times and is occasionally a little ragged around the edges. Yet it still adds loads of character to lead lines. Though purists might be bummed by its inclusion, I found the low-end lift from the MOD switch useful—particularly at lower gain settings, where it fills out the bottom end especially well. In general, though, the MOD switch’s effect on the output is subtle and doesn’t overpower the Centavo’s basic voice. If there are any noteworthy audible differences between the Centavo and an original Klon, it might be the Centavo’s lack of midrange glimmer, a quality that, for me, distinguishes the Klon Centaur. Maybe that’s why originals are $5,000 these days. But, man, that’s a lot of money for a little extra midrange!
The Verdict
Both of these new pedals from Warm Audio are well-built and carefully executed renditions of their inspirations and deliver very close approximations of the target sounds. If they aren’t dead on, and few clones ever are, they certainly get very close for extremely reasonable money, both yielding dynamic overdrive regardless of price. That they do so much to deliver the visual appeal of the originals only sweetens the deal.
Better Than the Klon & Zendrive?! Warm Audio Centavo & Warmdrive Demos | First Look
- Warm Audio Introduces the Foxy Tone Box and Jet Phaser ›
- First Look: Warm Audio Jet Phaser ›
- Warm Audio Jet Phaser Review ›
- Warm Audio Launches Two New Guitar Pedals - Premier Guitar ›
- Warm Audio ODD and Mutation Phasor Demos | PG Plays - Premier Guitar ›
- Warm Audio RingerBringer and Warm Bender Demo ›
- Warm Audio WA-C1 Chorus Vibrato & Pedal76 Release - Premier Guitar ›
- Warm Audio Pedal76 & WA-C1 Pedal Demos with Tom Butwin - Premier Guitar ›
With advanced controls, full MIDI integration, and expression pedal compatibility, the Elipse is designed for guitars, bass, synthesizers, vocals, and vintage keyboards.
Powered by Kernom’s patented Analog Morphing Core technology, the Kernom ELIPSE isn’t just another modulation pedal. With the innovative MOOD control, musicians can seamlessly morph between iconic modulation effects, from rhythmic tremolos and lush choruses to jet-like flangers and swirling phasers. The addition of the SWIRL control introduces a unique phaser-blend for rich, multidimensional textures.
Key Features
Iconic effects and more
The ELIPSE offers a wide range of modulation effects, including tremolo, harmonic tremolo, rotary speaker, vibrato, chorus, tri-chorus, flanger, phaser, and Univibe.
Innovative controls
MOOD Knob: Seamlessly transition between effects, creating rich, hybrid sounds.
SWIRL Control: Blend a slow phaser with other effects for multidimensional textures and get that “fat tones” you’ve always dreamed of, enhanced by an analog drive circuit for reacher harmonics.
Creative Modulation Tools
Advanced controls like SHAPE, MIX, and DEPTH let you tailor waveforms, blend dry/wet signals, and adjust intensity to craft your perfect tone.
Full MIDI integration
Save up to 128 presets, control all parameters via MIDI CC (including Tap Tempo and MIDI Clock), and sync with your DAW or MIDI controller.
Manage your presets and settings with the MIDI Controller Companion software.
Expression pedal
Morph between presets in real time for unparalleled dynamic expression during performances or studio sessions.
Perfect with other instruments
Built for versatility, the ELIPSE excels with guitars, bass, synthesizers, vocals and vintage keyboards. Its input stage is designed to handle both instrument and line-level signals seamlessly.
The rugged aluminum casing ensures reliability in any environment.
The Kernom ELIPSE will be available starting January 21, 2025, at a retail price of $369 (MAP). ELIPSE will be available globally beginning January 21, 2025.
Experience the ELIPSE at NAMM 2025—visit us at booth #5439.
For more information, please visit kernom.com.
Tone Demo | Kernom ELIPSE Modulation Effect - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Leveraging 3D printing technology, the new Floyd Rose Original locking nuts are designed to deliver unmatched precision and consistency, replacing the traditional “lost wax” casting method that dominated for decades.
The shift to 3D printing allows for intricate detailing and tighter tolerances, ensuring each nut meets exact specifications.
The process begins with powdered metal, which is precisely 3D printed into the desired shape using advanced metal printing technology. After printing, the parts are depowdered and cleaned before undergoing a sintering process—an advanced heat treatment—during which the parts achieve full density and hardness. Lastly, the nuts are CNC “kiss-cut” to exacting specifications for consistency and control of the fit before receiving a premium electroplating finish.
“Floyd Rose has always been synonymous with innovation, and by embracing this incredible new technology we are able to continue that legacy,” said Andrew Papiccio, president of AP International Music Supply of which Floyd Rose is a division. “The accuracy and flexibility of the new 3D printing method will allow us to make a more consistent piece while also giving us full control of the manufacturing right here in the USA.”
Initially, the 3D-printed locking nuts will be available in ten classic sizes with a 10” radius, with plans to expand the range to accommodate various fretboard radii in Spring 2025. This augmentation will offer players more options for customizing their setups to match a wide variety of fretboard curvatures.
To get a sneak peek at the new Floyd Rose USA Series, come visit us at NAMM in booth 5734 in Hall D.
With flexible voltage adjustments, precise control, customizable protection, compact design, and affordable pricing at $299, the Brownie is the ultimate solution for optimizing tone and safeguarding your gear.
AmpRx, the trusted name behind the industry-renowned BrownBox, has unveiled its newest innovation: The Brownie, a voltage-optimizing power supply for modern amps and the first of its kind.
Designed by AmpRx co-owner and CEO Cassandra Sotos (2024 NAMM Female Entrepreneur of the Year), the Brownie provides unparalleled control, flexibility, and protection specifically for modern tube amplifiers by allowing the player to both increase and decrease voltage with volt-by-volt precision.
Priced at $299, the Brownie offers an affordable and essential solution for protecting your investment in your high-quality tube amp. It allows you to optimize your tone and safeguard your gear from variations in voltage by givingthe ultimate advantage: knowing exactly what you’re feeding your amp.
Known as the secret weapon of touring professionals, AmpRx products have been spotted on stage with bands like the Red Hot Chili Peppers, Lynyrd Skynyrd, Zac Brown Band, Iron Maiden, and many more. AmpRx is now bringing its game-changing technology to an even broader audience with this compact, affordable, and versatile product. Try the Brownie for yourself and discover exactly why artists, amp designers, and technicians rely on AmpRx to provide consistent sound, performance, and extend the life of their gear.
The Brownie will be available January 20th, 2025, presented at NAMM Global Media Day and on display at Booth #5630.
WHAT MAKES THE BROWNIE SPECIAL? Building on the success of the flagship BrownBox, the Brownie offers key innovations tailored for modern amplifiers:
- Flexible Voltage Adjustments: The Brownie is the first in the AmpRx line to both decrease and increase voltage, providing optimal performance for modern tube amps (often at 117-120V).
- Precise Control: Adjust voltage in ultra-precise -1V increments when decreasing, and by +3V or +5Vwhen increasing, allowing musicians to fine-tune their tone with precision.
- Customizable Protection: The Brownie ensures safe operation, putting control directly in the player's hands, and includes two fuse options: 2A for smaller setups and 4A for larger setups, ensuring compatibility with diverse gear.
- Compact and Portable Design: Smaller and lighter than the original BrownBox, the Brownie is perfect for musicians seeking portability, durability, and streamlined functionality. It can even fit on a pedalboard or in a backpack.
- Wide Accessibility: At just $299, the Brownie offers professional-grade voltage control at a price point that’s accessible to musicians everywhere.
Email sales@brownbox.rocks to order and stop by NAMM Booth #5630 to see the Brownie in action, talk with the owners, team and artists, and see exactly why so many people insist onAmpRx products when they make music.
For more information, please visit brownbox.rocks.
Designed by Obeid Khan, this amp is designed to offer versatile tone control for classic amp sounds.
Magnatone LLC has introduced the StarliteReverb, a 1x8” combo that offers 5 watts of sweet-toned Class A power.
This amp is designed to capture the sound of classic long-pan spring reverb authenticity, thanks to the use of an Accutronics Digi-Log Reverb. Carefully optimized gain stages ensure the reverb seamlessly integrates with the amp’s natural sound, preserving the true classic tone of Magnatone amps.
- Output wattage: 5 watts, Class A
- Three control knobs: Volume, Tone and Reverb
- Magnatone Custom 8" Ceramic Magnet, Made by WGS in the USA
- Street Price: $1799
Obeid Khan, Magnatone’s engineer and tube amp guru, designed this model based on the success of the original Starlite model, and it uses the same classic single-ended amp with a 6V6 power tube. Khan’s unique tone control knob enables players to achieve classic “black-panel or tweed” tones with just a single knob.
Ted Kornblum, President & CEO of Magnatone LLC says “The Starlite Reverb is an amp much bigger than its size and power rating. When you put a microphone on it, it’s all you need!” TheStarlite Reverb blends analog tube warmth and lush reverb resulting in a subtle depth and modulation that adds dimension to your tone.
The Starlite Reverb is available to pre-order now in a 1x8” combo or with the matching 1x12” or 2x10” extension speaker cabinet. Shipping begins mid-2025.
For more information, please visit magnatoneusa.com.