Hard-hitting, dance-punk duo Death From Above 1979 takes production into its own hands and delivers an onslaught of noisy dance mayhem on Is 4 Lovers.
For brash Canadian rock 'n' roll duo Death From Above 1979, the road to maximum impact has always been paved with as few elements as possible: drums, vocals, a bit of synth, and some wildly athletic and fuzzed-out bass guitar.
Bassist Jesse Keeler and drummer/vocalist Sebastien Grainger came out of the gate swinging in 2004 with their debut LP, You're a Woman, I'm a Machine, a record that proved the band's mix of unexpectedly sparse instrumentation, danceable rhythms, highwire vocals, and grimy, hardcore punk sonics to be a tremendously compelling sound. The duo imploded shortly after that album's release, but the waves created on that record would ripple long after the split as DFA 1979's legend grew.
Death From Above 1979 - One + One (Official Music Video)
When Keeler and Grainger regrouped in 2011 and set about recording their sophomore effort, The Physical World, there was tremendous pressure to nurture and preserve the sound of that first album in order to avoid alienating the fanbase they'd harnessed in their time away. Keeler explains, "When we started playing again in 2011, this idea of Death From Above was an external thing that had lived without us, so we came back to it not wanting to screw that up. We were working in service to this thing that had lived without us. That's exactly how the producers felt, so we had those producers to keep us being that band."
The Physical World, produced by Dave Sardy, made good on the band's intentions to hone the brutal dance-punk sound that made the band's debut such a smash, and the group's 2017 Eric Valentine–produced effort, Outrage! Is Now, opted to stick to a similar program. Rather than tread water for a fourth release, DFA 1979 has returned with a decidedly playful new record entitled Is 4 Lovers, which brings a new, defiant flavor to the band's discography.
"I have riff diarrhea. I have riff IBS and I just can't shut it off!" —Jesse Keeler
Is 4 Lovers takes listeners on a turbulent trip straight to the center of Keeler and Grainger's musical psyche. The record feels not unlike a sweaty, blistering live set as their dancy churn and gritty sonics remain intact, especially on tracks such as "Totally Wiped Out," and the two-part "N.Y.C. Power Elite." Elsewhere, songs like "Glass Homes" and "No War" show a new level of maturity in the band's sound as the combative edge that lined their past efforts has been replaced by a heavier dose of melody and a more thoughtful use of effects and synths.
This time around, Keeler and Grainger decided it was time to take production duties into their own hands. As a result, Is 4 Lovers may be the purest expression of what DFA 1979 is about since their debut.
Jesse Keeler's Dan Armstrong Lucite basses are all outfitted with custom pickups made by Kent Armstrong, son of Dan Armstrong. Keeler also swaps out the original fixed rosewood bridges for custom brass units milled by Canadian luthier Les Godfrey.
Photo by Debi Del Grande
Frustrated with how other producers changed their sound in the past, Keeler explains their decision: "We wanted to make it really apparent on this album that you're listening to the band—just the two of us. Part of being in a two-piece 20 years ago was dealing with people in the music business who thought it was a bad idea. They liked the music, but they thought it would need help. Producers always wanted to pad up the sound. It's not a knock to anyone we've worked with in the past, but if you're someone that's mixed all these records where the guitar is a really important thing and we ask them to do the same thing with our sound but without the tools they're used to working with, it can be tough. Doing it all ourselves, we don't have those hang-ups and we never come at it thinking there's this hole we have to fill in our sound."
The duo still makes a hell of a lot of noise on Is 4 Lovers, even without a producer pushing them to pad their sound with additional instrumentation. As longtime fans will expect, Keeler's bass tones kick the listener in the jaw with plenty of the square-wave filth he's reveled in since DFA 1979's inception. However, his rig has changed dramatically for the first time in the band's history. Rather than plugging into his trusted backline of a vintage Peavey Super Festival F-800B and an Acoustic 450 head—a pair of amps which Keeler has always described as defining elements of the band's sound—the bassist tracked his parts with a pair of Orange Bax Bangeetar preamp/EQ pedals that he modified himself.
TIDBIT: Death From Above 1979's fourth studio album, Is 4 Lovers, was entirely written and produced by band members Jesse Keeler and Sebastien Grainger and recorded all in one room.
Why the change after so many years? Part of it was the need to sidestep the isolation headaches of miking loud amps while the duo tracked Is 4 Lovers live, together in one room. But Keeler also found the modded Bax Bangeetars remedied some things he always disliked about his tone."The old rig sounded good through the monitors," he says, "but it had the same issues I've always had with it. I love how all the 300-500 Hz stuff sounds through the amps but recorded it can come out as mud and there's always some loss of clarity, especially when I'm competing with tones in the drums."
The Bax Bangeetars provided an ideal surrogate for the old amps, but not without a bit of tinkering from the tech-savvy bassist, who explains his handiwork: "Those pedals are a very simple circuit, but they have this power pump that takes the 9 volts in and charges up the cap, which slowly releases it at 24 volts. I found at high gain, even with the highest milliamp 9V power supply I could find, it couldn't keep the cap filled up fast enough. I had these science-grade variable power supplies and, if you wire around the pedal's stock power supply so that you can feed that cap directly, then you don't get that headroom loss at all and it sounds really good."
Jesse Keeler's Gear
Basses
- Ampeg Dan Armstrong Lucite basses (modified with custom Kent Armstrong pickups and brass bridges made by luthier Les Godfrey)
Amps
- Orange Bax Bangeetar Guitar Preamp & EQ (modified by Keeler)
Strings and Picks
- Ernie Ball Regular Slinky Nickel Wound Electric Bass Strings (.050–.105)
- Dunlop .73 mm Tortex Triangle
Effects
- Death By Audio Echo Dream 2
- Death By Audio Fuzz War
- EarthQuaker Devices Bit Commander
- FoxRox Octron3
- Ibanez CS9 Stereo Chorus
- MXR Ten Band EQ
- Overstayer Modular Channel Stereo 8755D
Keeler says that increased headroom has long been a special ingredient to his tone and adds, "The secret with my Peavey F-800B head and part of the reason why it's so special is that it's running on 36 volts. The schematic for that Peavey amp says 24 volts, so whenever anyone would clone the circuit, they'd do it to run on 24 volts and, when you try to play it like I do with the distortion cranked up to 10, it starts self-compressing and crapping out!"
Despite the major shakeup in Keeler's amp world, the bassist's primary muse remains his small collection of vintage Ampeg Dan Armstrong Lucite basses. Thanks to their skinny neck profile, short scale length, and easy access to all 24 frets, the bassist credits these instruments with unlocking his unconventionally athletic playing style in which he bends strings and frequently combines droning open notes with guitar-lead-like riffs that he plays simultaneously in the upper frets.
While these basses are a great fit for Keeler, he's found some need for modifications. All of his Dan Armstrong basses have been re-fretted with wider fretwire and outfitted with custom pickups made by Kent Armstrong, son of Dan Armstrong. The most important mod that Keeler does to all of his basses is to swap out the original fixed rosewood bridges for custom brass units milled by Canadian luthier Les Godfrey. Godfrey's bridges have fully adjustable saddles, which makes life a lot easier as Keeler used to struggle with the original bridge's intonation issues.
Jesse Keeler mainly sticks to his modded Dan Armstrong basses, but he also has several custom Rickenbacker 4030 models.
Photo by Jim Bennett
The brass bridges also offer an important tonal benefit. "The overall problem with that bass is that it sounds like talking with your hand over your mouth; it's a very muffled, low/mid sound with not enough brilliance, even with brand new strings on it," Keeler says. "I wanted as much bright attack as I could get out of it. When playing notes in quick succession, I want the initial attack of the note to be very present, so brass saddles and brass nuts really help with that." These modifications take a lot of effort, but he adds, "I did all this work to make them right because I love them so much."
For effects, Keeler pulled his usual pedalboard apart and got experimental in the studio. A pair of Foxrox Octron3 octave pedals appear on nearly every track, with each one sent to their own Bax Bangeetar and set to accentuate slightly different frequencies. The bassist also frequently called upon a Death By Audio Fuzz War but claims to have had the fuzz control barely on, using the pedal more for its powerful filter than its heaps of gain. One of the most vicious tones on Is 4 Lovers can be heard on "N.Y.C. Power Elite Part II," which he happened upon by plugging into an EarthQuaker Devices Bit Commander and turning the volume on his bass down to the point where it began to starve the synth box of enough signal to track its multiple octaves properly.
Bassist Jesse Keeler says he and drummer/vocalist Sebastien Grainger no longer have to talk about writing: They simply feel it out and intuitively know when an idea has clicked. Their shared killer instincts are palpable onstage.
Photo by Debi Del Grande
Songwriting is a collaborative process for DFA 1979, and something the duo has fine-tuned over the course of their discography. Keeler admits, "I don't really think of myself as a songwriter, I just vomit out riffs," he says. "I have riff diarrhea. I have riff IBS and I just can't shut it off!" He goes on to explain, "I try to distill my ideas down to make things musical enough that Sebastien can sing over, because he wants a melody. I've given him things in the past that became very hard to find a melody for because I would write things that you could only scream over," he says. "Sebastien is the one that moved me towards making songs and not just trying to create a feeling."
On Is 4 Lovers, the writing process came from shared instinct rather than intellect. Keeler says he and Grainger no longer have to talk about writing, they simply feel it out and intuitively know when an idea has clicked. "We made this record entirely within one room," Keeler says. "We'd hit record the minute we got there and play through the day, so a lot of what you hear on the record is the actual creation of those parts the moment they were made up. I'm really into that immediacy."
This method of writing and recording allowed the band to deliver a tight and focused record that totally aligns with how Keeler and Grainger want DFA 1979 to sound. "I think the results are amazing and I think this is the best sounding record we've made," the bassist says. "Not to take anything away from anyone we've worked with in the past, but this one sounds the most right to me because it's all us."
Death From Above 1979 - Holy Books (Live in Toronto)
Jesse Keeler's bass tone will explode from your speakers in this live version of "Holy Books" from Death From Above 1979's Outrage! Is Now. The bassist's heavily distorted riffs pummel along with Sebastien Grainger's hard-hitting grooves throughout the song's main sections, while he conjures a just-on-the-verge-of-feedback tone for the melodic breakdown starting at 2:23.
- Best Albums of 2020 - Premier Guitar ›
- Death from Above's Jesse Keeler: Like an Ant Looking at the Moon ... ›
- Rig Rundown: Death From Above 1979 - Premier Guitar ›
The Hi/Low footswitch is designed to provide a gain boost with an EQ shift for tight tones.
Now featuring enhanced functionality, along with a new and improved look, the Dutch Overdrive ‘24 offers versatility in a pedalboard-friendly package.
The Dutch Overdrive retains its ability to cover a broad range of musical styles, from transparent clean tones and edgy breakup to medium-gain blues, hard rock rhythms, and searing leads. Delivering a perfect blend of classic American and British sounds, its smooth, balanced voice ensures compatibility with a wide variety of instruments and amplifiers.
In addition to a familiar four-knob control set – controlling drive, treble, bass and output level – the new Dutch ’24 offers a potent Hi/Low mode selector controlled by an independent footswitch. By engaging the Hi gain mode, you can add a preset, carefully tailored EQ/gain boost to provide just the right amount of punch, clarity, and output level to your solos.
Key features and upgrades to the Dutch Overdrive include:
- Hi/Low footswitch provides a gain boost with an EQ shift, enhancing added gain and focusing the midrange for tight tones
- A refreshed design for a modern aesthetic, with top-mounted input/output jacks
- Upgraded soft touch switching with last state memory – powers up with the same settings you were using when you previously powered down
- 9-18 volt operation using standard external supply (no battery compartment)
- US-made in Mesa, AZ
The re-release of the Dutch Overdrive brings back a classic with modern improvements. The street price for the upgraded Dutch Overdrive is $225 and is now available for purchase at lpdpedals.com.
Developing good, clean workshop practices will help you save time and money.
Who doesn’t like a sweet, sustaining, saturated guitar sound? I know I do, but I also love a clear and full clean tone maybe even more. Dirty or clean, to me a guitar sounds like a million bucks when the tubes are glowing and the playing flows. But most of the time I’m in the workshop making lots of dirt, and I don’t mean the overdriven amplifier kind. Making guitars can be a dirty business. Carving wood, plastic, and steel into a majestic instrument creates a lot of mess, and eventually you have to sweep your way clear.
Half a century ago, a mentor passed on this advice: The best way to clean up a mess is to not make one in the first place. Maybe this sounds quaint, but I assure you that it is good for business—any business. It doesn’t matter if you make pedals, guitars, amps, or even music, mess is money down the drain. Not only that, it’s a psychological strain on you that saps your energy and makes you careless.
When I worked at Fender, I was part of a team that was charged with revamping departments for efficiency, safety, and worker well-being. I can’t say that we made a huge difference, but I learned a lot that I could apply to my own shop and a host of other businesses. One thing there we didn’t have to fix was cleanliness. Despite the gargantuan scale of the enterprise, all of the factories are incredibly clean, especially considering the amount of materials that get processed. It reminded me of the race cars and shops of Roger Penske, who understood that a clean, organized workplace sets the tone for excellence. It’s also difficult to pinpoint problems when areas are cluttered, and you can’t see what’s going on clearly.
Beyond the obvious advantages of keeping things organized, there is another benefit created by keeping things clean, one that I’m surprised that more shops I visit (and see in videos) don’t understand. Sooner or later, you’re going to have to stop making your product and clean up. When you’re buried in debris, straightening up is time-consuming, and time is money. When you determine your cost per unit, whether it’s guitars, amps, or even rehearsal time, do you factor in the hours you spend cleaning up? It may not seem like much, but it can really add up. Regardless of if you own a shop or are in a band, if you create a tangle every time you work, the time you spend undoing it is time you could have been with your friends, family, or doing anything else.
A well-designed work area that reduces clutter will save your health and save you money. You don’t have to be a big organization to justify some basic cleanliness improvements like a good dust-collection system, either. It doesn’t have to be a huge investment. There are a slew of affordable mobile dust-collectors/vacuums with adjustable arms that can be rolled from task to task.
"When you determine your cost per unit, whether it’s guitars, amps, or even rehearsal time, do you factor in the hours you spend cleaning up?"
Stop blowing dust off your workbench or machinery onto the floor—picking it up later is like throwing profit away. Everybody benefits because cleanliness improves efficiency that reduces passing unneeded costs on to your customers. Over the course of a year, cleaning up 60 minutes a week adds up to almost seven days’ worth of time you could be using for something better, and who doesn’t want an extra week?
I’ve found that if you build cleanup time into your daily routine, it reduces stress as well. It’s important to create procedures that promote a constant state of improvement and order. After a gig, pro techs have a mandated way of breaking down and stowing gear that avoids confusion when the next setup happens. Daily routines of maintenance and cleanup catch problems before they stop the show or cripple production. If you habitually clean the spilled beer off your cables and amplifier, you’re making it easier for yourself in the long run. I know this all seems pretty obvious to some of you, but I’ve learned from master Kaizen practitioners that there’s always a higher level to reach for. If you are a one-person shop or a weekend warrior musician, those steps can really make a difference.
I suppose the reverse is true for me. If I apply this multi-tiered improvement regime to my guitar playing, I’d probably be a lot happier with my proficiency. An old dog can learn new tricks, and that’s exactly what I mean to do. So when I step on that distortion pedal, it will be the only dirt I deal with.A very Vox-like template yields a surprising wealth of trans-Atlantic tones—all in a light, compact head.
Relatively small and light. All-tube power and preamp sections. Surprising versatility for a single-channel format.
You’ll have to be willing to tinker a lot with the EQ to tap into the maximum number of sounds.
$1,499
Victory The Deputy Compact Guitar Head
victoryamps.com
If a venue’s dimensions demand you turn down, you might as well lighten your load.Victory Amps are hip to this trade-off. Their line is now thickly populated with amps that are smaller, quieter, but still sound massive.
The EL86-driven, 25-watt, single-channelThe Deputy Compact Head is the newest of Victory’s mighty mites. Although it’s generally lunchbox-sized, The Deputy looks like a proper amp head—eschewing the mostly metal, vented enclosure design used in some other Victory offerings. Created in conjunction with Pete Honoré (known to many YouTube guitar heads as Danish Pete), The Deputy Compact Head aims to span ’60s British-style clean tones and ’70s classic-rock overdrive. It’s truly compact at 15" x 8" x 7.5" and 17.6 pounds.
Dawg Daze
Other than the bijou size, which is not unusual these days, The Deputy stands out for its use of EL86 output tubes. Although it can be re-biased to use the more common EL84, Victory ships the head with a pair of new-old-stock EL86 tubes which are broadly similar to EL84s in character and output power—though capable of a little more of it from a little less voltage. They are also relatively available and affordable as NOS components. The preamp is driven by three 12AX7s. Rectification is solid-state.
The straightforward controls include gain, treble, middle, bass, reverb, and master, plus a 2-way bright switch and a 3-way voice switch. The latter is arguably more of a gain-structure switch, though gain, voice, and tone are often used interchangeably in guitar-speak. The amp’s lowest gain setting is accessed via the upper position. The middle position stacks another +6 dB of gain on top of that, and the lower position adds upper-mid and treble on top of the extra 6 dB. As for the reverb, Victory describes it as a mix of plate- and hall-type textures, and it is probably meant to sound a bit more contemporary, studio-like, and less specific than a traditional spring reverb.
The amp’s back panel includes send and return jacks for the series effects loop, two 8-ohm speaker outputs and one 16-ohm output, bias checkpoints, and a bias adjustment pot. Rather than being cathode-biased like most EL84 amplifiers, The Deputy’s EL86s are run in adjustable fixed bias, which delivers slightly tighter, firmer response from any given pair of tubes, while maximizing their output potential (all else being equal). As such, you need to check and adjust this setting when replacing the EL86s or substituting EL84s. The Deputy’s circuit is arranged on a rugged printed circuit board, the components are all high quality, and the transformers are U.K.-made.
Hot Lunch
I tested The Deputy with an open-back 1x12 cabinet equipped with a Scumback J75 and a closed-back 2x12 with Celestion M65 Creambacks. I also paired it with a Gibson ES-355, a Fender Stratocaster, a selection of overdrive pedals at the front end, and a Source Audio Collider in the effects loop for delay and reverb. Almost regardless of what’s in the mix, The Deputy is a great-sounding little head. In fact, any sense of “little” largely vanishes from consideration once you start playing it. Full, fat, deep, clear, and vintage-leaning, with a character that’s very much its own, The Deputy doesn’t care if there’s a stompbox anywhere in sight, but it’s also an excellent pedal platform.
The Deputy’s tube complement and Victory’s English origins might imply that strictly Vox-like voices emit from this diminutive head, but the circuit enables many more trans-Atlantic sounds. With the EQ dialed in right and the bright switch engaged, The Deputy will indeed cop AC-style tones on the clean and crunchy side of that spectrum. But the robust preamp voicing and fixed-bias output stage—as well as the solid-state rectification—lend a tautness that enables convincing Fender-like tones when you want them. By dialing down the middle control to around 10 o’clock with the voice in the low-gain position, the gain below noon, and master just advanced from midday, I heard pretty good Deluxe Reverb sounds. There’s certainly more than just one breed of clean to source.
On the whole, I preferred heavier amp-generated crunch and lead sounds with the voice switch in the middle position, the bright switch off, and a little bump from the midrange control. Set this way, The Deputy lends thickness to a Strat without adding harsh or spiky clipping, while the ES-355’s humbuckers are blissfully muscular and aggressive. With more conservative gain settings, the extra upper mid and high end from the brighter voice add cutting power and a shimmering, cranked-Vox-like character that plays well with many styles. Add digital reverb—which moves readily from “just a touch” to an evocative atmospheric wash—and the palette of tones at hand becomes even more impressive.
The Verdict
With an able assist from Pete Honoré, Victory has pulled off another deft design. It’s a toneful performer that can sound and feel bigger than it is. For a single-channel head, it’s crazy versatile—with or without pedals. But if you’re into economy on the equipment and cost fronts, you’re bound to be pleased with how much you can do with this high-quality, diminutive head, a cab, a guitar, and nothing else.
Victory Amplification The Deputy 25 25-watt Tube Amplifier Head
Deputy 25W Tube HeadThe Jason Richardson signature includes HT humbucker pickups, 24 stainless steel frets, and custom tremolo.
Inspired by over a decade of guitar string research, HT pickups deliver an ultra-high-output, powerful low-end response while retaining a distinctively clean, clear tone and definition at lower volume levels. The HT pickups in the latest Jason Richardson model have been voiced specifically for Jason with unparalleled clarity, power, and output. Additional features include 24 stainless steel frets, a custom Music Man tremolo, and innovative electronics, including a push/push volume knob for a 20+ dB gain boost and coil splitting via the push/push tone knob. The Jason Richardson Artist Series Cutlass HT is available now in two new finishes:
- Kokiri Forest—a mesmerizing translucent green finish. Crafted with an alder body, a buckeye burl top, and a roasted, figured maple neck with an ebony fretboard.
- Venetian Red —a striking translucent finish. Crafted with an alder body, a maple burl top, and a white maple neck with a striped ebony fretboard.
“These new pickups are a level up! More body and fullness, effortless pinch harmonics. I’m stoked to have more variations for everyone to choose from with my models now!” “The KokiriForest might be my new favorite color! Absolutely stunning to see in person! The Venetian Red also adds a more diverse option between the woods we haven’t done with my line before, incredibly stoked on both these guitars!” -Jason Richardson
The Jason Richardson Artist Series Cutlass HT in Venetian Red is available exclusively in the Ernie Ball Music Man Vault and is limited-to-25 units in a 6-string and limited-to-25 units in a 7-string. The Kokiri Forest colorway is available at your local Ernie Ball Music Man dealer.
For more information, please visit music-man.com