Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Why MIDI Matters

Pedalboard

Bryan’s MIDI-based ’board.

The ability to MIDI-enable your pedalboard and convert audio to MIDI using plugins or software adds a whole new level of experimentation and creativity for guitarists.

In 1983, music had a banner year: U2’s War, the Police’s Synchronicity, Metallica’s Kill ’Em All, Stevie Ray Vaughan’s Texas Flood, Talking Heads’ Speaking in Tongues, and ZZ Top’s Eliminator were all released (to name but a few). It was also the year MIDI (Musical Instrument Digital Interface) was unveiled, and saying that it forever changed the musical landscape is an understatement. Until very recently, guitar-oriented manufacturers had never taken advantage or expanded on MIDI possibilities.


For guitarists, MIDI was a bit of a useless concept—something the synth player in your band endlessly yammered about while you plugged in your amp and pedalboard and set up for the gig. Well, tighten up your belts, the Dojo is now open.

The Paradigm Changes

Developed by a consortium of musical heavyweights, including MIDI’s progenitor Dave Smith (Sequential Circuits), Ikutaro Kakehashi (Roland Corporation), and engineer Tom Oberheim, MIDI enables synths and drum machines from various makers to “talk” to one another using a standardized “language” over a 5-pin cable. The original MIDI instruments included Roland’s TR909 and Jupiter-6, and Smith’s own Prophet 600. Today, MIDI can be carried over USB, 3.5 mm, and 1/4" TRS cables, as well as Bluetooth. It’s also something that more and more pedal makers are taking advantage of en masse. Many months ago with the help of my friends at XAct Tone Solutions here in Nashville, I finally wired up a MIDI-based pedalboard (Photo 1). Why would I ever go down this rabbit hole?

“Until very recently, guitar-oriented manufacturers never took advantage or expanded on MIDI possibilities.”

For several huge reasons: It gives me greater control over all of a given pedal’s obvious (and hidden) parameters that I can adjust simultaneously using expression pedal(s); the ability to toggle, latch, or tap tempo for many pedals at once; to create, save, and adjust wildly divergent preset parameters on the fly (using CC and PC messages); and organize song lists and set lists, for starters.

While this is possible with multi-effects pedals from Line 6, Fender, Neural DSP, Boss, Kemper, etc., I often find that I don’t like all the sounds bundled within these units. I may not like certain types of amp models, overdrives, choruses, reverbs, fuzz, and delay offerings from one maker, and prefer the algorithms of another brand entirely. With more and more pedal manufacturers embracing MIDI, we’re much closer to a “having our cake and eating it too” scenario.

I can further use my MIDI-enabled pedals with instruments beyond keyboards, drum machines, samplers, and other MIDI controllers (this may be the subject of a future Dojo). But for now, I want to get your creativity fully charged, and take you down another rabbit hole I stumbled into!

Becoming a Convert

Let me give you one of my new favorite “effects” I’ve been exploring. This involves using any plugin or software that will convert audio to MIDI. Certain DAWs (Ableton, Pro Tools, etc.) already have the ability to convert an audio file to MIDI. If your DAW does not, you can use Melodyne and pitch-based plugins, or free ones specifically made for this like NeuralNote or Basic Pitch, which were developed by Spotify.

Try This

Now let’s “break” the plugin. Either use a prerecorded audio track (guitars, vocals, bass, keys, or even ambient field recordings), or grab your guitar and record something with all the effects you would normally use. Delays are particularly fun to have here since they repeat pitches already played! Now convert this audio track to MIDI. In Pro Tools, right-click on the audio file and select “Copy Audio as MIDI.” I tried this using a fuzzed-out solo I played on a recent record I produced.

Next, create an instrument track and instantiate a soft synth of your choice (I’ve used Arturia’s Jup-8 with one of my tweaked presets). Now paste (Cmd or Ctrl+V) the MIDI-ized audio onto the instrument track. Based on your sensitivity settings, you should have all kinds of crazy extraneous notes in various octaves.

From here, solo the instrument track with your new MIDI, and let your imagination loose! Pay attention to the parts of your original audio track that were accurately “preserved” and what parts were not. You can now play with velocity, duration, quantization, and transposition for any and all notes. For example, I chose to isolate notes that were originally part of the delay and then adjusted them to match the underlying implied chords I soloed over—thus turning my guitar’s delay into a MIDI chord accompaniment for my solo!

I hope you canceled your dinner plans. Blessings, and until next time, Namaste.

Supported by Focusrite

Sign up below to join our newsletter list for daily NAMM show updates, so you don't miss our world-class gear coverage!

Read MoreShow less
Godin Guitars Artisan TC & ST II Whiskeyburst Demos | NAMM 2025
- YouTube

Canadian crew Godin Guitars reintroduced their Artisan line (original run in the '90s) with some modern updates and posh appointments. Both the Artisan TC (slide 1) & Artisan ST-II (slide 2) include Canadian Laurentian basswood bodies drizzled with a barrel-proof, high-gloss Whiskeyburst finishes, hard-rock maple necks, a maple fretboard on the singlecut and an ebony board on the double cut, and the T was loaded with Fralin pickups (Split Blade Tele & Unbucker), while the ST-II comes with Fishman Fluence Classic humbuckers.

Fishman Greg Koch Gristle Tone Single Width 3 Pickup Set Demo | NAMM 2025
- YouTube

Fishman introduced a new set of Greg Koch signatures, the Gristle-Tone ST Strat-style trio, at NAMM 2025, as part of its Fluence series. They are remarkably hi-fi sounding, with exceptional definition, clarity, and punch. And while they come stock in Koch’s latest Reverend Signature model, the Gristle ST, you can get ’em from Fishman for your S-style axe at $269 (street) per set. PS: You gotta watch the demo video!

Radial Engineering Highline & Highline Stereo | NAMM 2025
- YouTube

Naw, this ain’t a DI. It’s Radial’s NAMM-fresh Highline passive line isolator, which comes in mono ($179 street) and stereo ($249), and uses premium Jensen transformers to preserve your signal’s pure sound. The Highline takes 1/4" cable (with XLR outs) for connecting amp simulators or pedals to your amps or a DAW. It’s compact and pedalboard friendly, and the Mono version sums stereo sources down to mono. The Stereo can take four 1/4 ” inputs and deliver a stereo signal, but it can also sum stereo sources down to mono. And it fits snugly under a pedalboard.

Read MoreShow less