
Sorry Kermit, it is easy being green. From recycling and repurposing old gear, to the larger movement for harvesting sustainable woods, we explore ways players can soften their impact on the natural world.
Guitar players love making messes. Slathering on too much fuzz at inopportune times, peaking VU meters, and rendering separation useless in the studio. It goes with the territory. True, sometimes you need complete isolation or the pristine precision of a Steely Dan record, but more often than not, there's something special about getting gross with your guitar.
But that's just aesthetics.
Unfortunately, guitarists also generate a lot of physical waste. Old strings, picks, batteries, and tubes need to be disposed of. Blown speakers, frayed wires, trashed amps, unwanted enclosures, and fried electronics need to be discarded as well. For better or worse, modern music making generates a small mountain of unwanted junk.
But don't fret—pun intended—these are solvable problems. Options and innovations abound.
In this modest dissertation, we focus on three areas: recycling waste, innovative repurposing of discarded materials, and—at what first glance might seem like a side point—sustainable harvesting of wood.
Part I talks about garbage. Some things, like guitar strings and metal amp chassis, are easy to recycle and might even have marketable value. But others, like old tubes and single-use batteries, raise difficult questions and could be too much trouble—or just too expensive—to recycle.
Part II profiles two innovative businesses—Wallace Detroit Guitars and Analog Outfitters—that do incredible things while repurposing old materials. Each company, in its own manner, has found a way to turn trash into treasure.
Part III is about wood. Most guitars are made of wood and many of those woods are rare and expensive. But two of those woods, rosewood and ebony, are becoming scarce. That scarcity has raised enough alarm that CITES—the international body that deals with such matters—has imposed new, strict regulations. But it isn't as bleak as it sounds. We focus our attention on the important initiatives being made to develop a more sustainable model for both the growing and harvesting of these precious tonewoods.
"Above all, don't put metal in your trash." —Christopher Bosso, professor of public policy at Northeastern University
In this story, we speak with entrepreneurs, captains of industry, tenured professors, and other experts to give you an overview of these complex and sometimes complicated issues. There's a lot more to say, but consider this a thorough introduction. Ultimately, guitar players make messes, but for the most part, those messes—at least the non-musical ones—can be cleaned up.
Part I: Responsible Junk Disposal
Broken strings, worn out picks, dead batteries, fried circuits, non-functioning gear, stripped cables, and blown tubes—what should you do with all that junk?
Strings
Electric guitar strings are made from different types of metal and that's true for most acoustic guitar strings, too (with the obvious exception of nylon). Those metals include steel, nickel, cobalt, bronze, and various other alloys.
But guitar strings don't last forever. They wear out, break, or get crusty and gross, and at some point, you must change them. Most players change their strings on a regular basis. Many pros change them every gig.
What should you do with your old strings? Should you throw them in the trash?
"Anything with metal in it should be recycled," Christopher Bosso, a professor of public policy at Northeastern University says. "It has material value and local recycling programs actually give money for that."
D'Addario recently made string recycling easier for guitar players, with their Playback program, which allows players to drop off unwanted strings at more than 400 music retail spots around the U.S., including all Guitar Center locations. As an incentive, those who join the program earn points for recycling that can be used toward new strings or gear.
Through the Playback string recycling program, D'Addario and partner TerraCycle have recycled over 1.2 million strings in 2017. A reported 1.5 million pounds of strings are accumulated in landfills each year.
You can also take matters into your own hands. Ben Juday, the founder of Analog Outfitters, a company that builds amplifiers from repurposed Hammond organs, recommends having special bins for metal waste. "I have a couple of 5-gallon pails in my garage," he says. "Any scrap or bit of wire, brass or copper, or any little bit—anything from guitar strings to cans to little pieces of steel—I put in there and either put it out for the scrappers or take it to the scrapyard."
Scrapyards pay for junk metal, melt it down, and resell it. But don't expect to get rich recycling strings. "You would have to have a heck of a lot," Bosso says. "Scrapyards deal with significant amounts. Obviously, there's an aggregator. Cities and towns that do that place big magnets over their recyclables and anything that's metal gets pulled to a separate place. It's then sold by the ton or gets separated into the different types of metals, depending on where it is in the waste stream. More recyclables than we care to admit don't actually end up being recycled. But anything that has metal in it is of value in the marketplace. The real trick is, how do you get that into the right stream? If you put your strings into a recycling container or where the collection bin is, that's better than tossing it into the trash. Above all, don't put metal in your trash."
Batteries
Most effects pedals used to run on batteries, though the industry trend seems to be moving away from that. "I've probably sold close to 1,000 pedals and I've only had two people ask about batteries," Eric Junge, the owner of Hungry Robot Pedals, told us in an earlier interview ("Stompbox Savants," September 2016"). "I think the general consensus is, most people aren't using batteries anymore," he added. "A lot of my designs are very tight internally—I couldn't even fit a battery into a couple of them. So my take is, 'Am I going to make this pedal bigger for the 0.1 percent of the public that's going to use a battery?'"
That said, some players still rely on batteries and they are recyclable, although most communities are not set up to handle them. "In an ideal world, you would take these single-use batteries and figure out a way to recycle them," Bosso says. "But hardly any states have recycling programs for single-use batteries. Car batteries do have a very high recycle rate. That's because they contain a valuable metal, lead, and they're big, and most times they are replaced by professionals at repair shops. You have a collection process, market value, and there is actually a process to extract the metal and other stuff from the batteries. There is a very high rate of recycling for car batteries as contrasted to consumer batteries."
In 1996, legislation was passed to phase out the use of mercury in batteries, making it legal in most states to dispose of single-use alkaline batteries via the regular trash. But single-use batteries can still be recycled at local recycling centers, along with rechargeable batteries and other electronic waste, which are restricted from being tossed in with regular trash.
Destroyed Amps, Fried Circuits, and the Forgotten Gear Graveyard
Anyone who's played long enough—and loud enough—has probably fried their fair share of circuits, amps, and speakers. (For example, I fried the output circuitry on my Peavey Heritage 2x12 combo twice. Smoke billowed from the chassis and everything. The second time was at an audition. I didn't get the gig.) You can leave your old gear in the garage. You can convert it into a lamp or coffee table. Or—believe it or not—you can sell it. Reverb even has a category for non-functioning gear. "Keep in mind," the site claims, "there are still plenty of buyers out there who are in the market for project guitars and other fixer-upper items."
Juday agrees. "I partly got my start by buying broken equipment, fixing it, and reselling it back in my repair days. There are people who want broken gear for a bargain." But if no one wants it, bring the metal parts to the scrapyard. "Take out the speaker and metal chassis and take that to a local scrapyard. They weigh it and pay you for the scrap metal. That metal is chopped up, melted down, and turned into new steel. However, there really isn't a good way to recycle the wooden cabinet. Your best bet is to break it down with a sledgehammer and throw the wooden enclosure away."
Circuit boards and non-functioning electronics are recyclable as well. Your local scrapyard will take them. However, the EPA also lists several retailers—including Staples and Best Buy—that have buy-back and drop-off programs. "If you want to see some interesting videos," Juday says, "search 'circuit board recycling.' You would not believe what they're able to do by grinding them up and melting them down. A circuit board has all kinds of precious metals—like gold and silver—and also harmful metals like lead and cadmium. They can all be recovered through the recycling process."
Tubes, Cables, and Picks
What should you do with blown tubes? Short of converting them into shot glasses, not much. "People say, 'You should recycle them,'" Bosso says. "But the response is, 'Where do I take them? What's going to happen to them?' It's a pain in the ass to do it. Cities and towns will hold the occasional eWaste day. You bring them your eWaste and what happens, frankly, is oftentimes it is put in a big container and shipped off to developing countries where someone might try to get the metals out of it."
"Anything with metal in it should be recycled." —Christopher Bosso, professor of public policy at Northeastern University
Juday agrees. "There's not a good way of recycling tubes, which is unfortunate," he says. "The good news is they don't have very much metal in them. They do have some precious metal in there, like tungsten and other metals, but it's in such small quantities that it's not really worth anything."
Your frayed cables can be disposed of like other metals and the copper wiring can be reused for various projects. Some even claim you can use old braided and shielded cable as solder wick (Visit Instructibles.com for " How to Recycle an Old Dead Cable" article.), but the verdict is out on that.
There's also not much you can do with your old, beaten, worn-out picks. "Some plastics are recyclable," Bosso says. "They have some value in the marketplace because they can be reused. But a lot of plastics increasingly don't have much market value, so cities and towns may end up incinerating it."
However, there is a trend for converting old credit cards, vinyl records, and other hard plastics into picks. If you feel a connection to your last credit card—or maybe if you've paid it off—you can continue using it to make music.
Part II: Making Treasure out of Trash
Wallace Guitars uses reclaimed wood from abandoned Detroit buildings and houses. According to CEO Mark Wallace, old-growth pine dated between 1860 and 1930 yields favorable tonal characteristics.
Wallace Guitars
Wallace Detroit Guitars, based in Detroit, Michigan, builds guitars out of wood salvaged from the city's many abandoned properties. "When you're in Detroit, it's hard not to notice that there are a lot of vacant properties," Mark Wallace, the company's founder and CEO says. "It looks like these places should be torn down, thrown into a dumpster, and nobody should ever think about them. But what's exciting to me is that we're actually finding really incredible wood in those houses and turning that into instruments that stand up next to any handmade instrument."
Most of the wood comes from the Architectural Salvage Warehouse of Detroit, a local non-profit that functions as an unusual lumber yard. "We're not breaking into houses we don't own," Wallace says. "I walk into a warehouse that looks like a scene in Indiana Jones and it's full of reclaimed wood. I can see the wood, I can see the species, and they track which property a piece of wood came out of."
The most plentiful species of wood found in old Detroit houses, other than oak, is old-growth pine. "There are 60,000 vacant properties in Detroit and most of them have pine in the joist. I knew that if I could turn a pine two-by-four into a great guitar, I would have a supply that would last a very long time. I didn't know if it was going to work—so we spent a lot of time prototyping—because pine has different characteristics from swamp ash, maple, or anything you traditionally make a guitar out of. What I discovered, which was really thrilling, is that the pine that comes out of houses that were built between 1860 and 1930 is generally pine that was grown in old-growth forests and it's very different from pine that is grown in modern forests. Typically, if you're trying to produce a two-by-four to sell at Lowe's or Home Depot, you're going to use trees that are spaced out a certain distance to maximize light and rainfall. You're going to hit them full of fertilizers to make them grow straight. You're going to trim them so they don't have any knots in them. In the old forests, every tree is competing with every other tree. They are fighting for sunlight and grow in a context of scarcity of natural resources. The reason that matters is that the growth rings you get from the old growth forests are much tighter than the growth rings you get from a modern forest. What I have is pine, and because it's so damn old, it's much more similar to ash, almost to maple, than pine you would typically expect to see in 2017. I've got this really beautiful stuff that has this really interesting performance characteristic to it."
The bodies are made from bonded-together two-by-fours and come in two styles: long grain and end grain. "The long-grain style is like racing stripes," Wallace says. "If we find trims made out of mahogany or walnut or something, we chop that up, plane it down, and slab it together. In terms of the standard pine, I really like showing off the history of the wood: the stains and the nail holes. [For the end grain], we do a long grain back and that forms the neck pocket. We then do a 5/8" cap on top where we expose the grain."
But working with these woods does pose unique challenges. "The big one is metal. Even if you use a metal detector, you still never know what's buried inside. We burn up a lot more blades than others do. Making sure the wood is dry to a consistent level is really important to us as well. Some of this stuff has been sitting outside for years."
Wallace guitars are constructed piecemeal by different teams of luthiers around Detroit. One group does the glue-ups, one does the planing, another does the sanding and finishing coat. The necks and set-ups are done separately as well, and the necks are made from maple. "I can't find enough consistent maple to do a reclaim," Wallace says. "We use Michigan maple and try to keep it in the state, but they're not reclaimed."
Illinois-based Analog Outfitters builds, or "up-cycles," amplifiers, cabinets, effects, and MIDI controllers out of parts scavenged from old Hammond Organs.
Analog Outfitters
Analog Outfitters, based just north of Champaign, in Rantoul, Illinois, builds amplifiers out of parts scavenged from old Hammond organs. "I started in 2002 as a repair/live sound company and did a lot of work on Hammond organs," Ben Juday, the company's founder says. "People would try to give me these old organs and I took a lot of them. They had no market value—people were just throwing them away—and I started messing around with them. In 2011, we started manufacturing amplifiers and it's continued since then."
Juday only dismantles organs that people don't want—he gets most of them for free—and his biggest expense is hauling them back to his warehouse. "Sometimes people are upset with us for destroying these old instruments," he says. "But you've got to realize, the ones that we destroy literally [would otherwise] end up on the side of the road, in the rain, and in the landfill."
He tries to salvage, or "up-cycle," as he calls it, as much as he can from the organs as well. "We reuse the wood, the copper wiring, the amplifiers, and [even] the tubes whenever we can," he says. "Hammond used redwood, mahogany, walnut, and a lot of really good woods—some of which you can't even get any more. We use these premium woods in our wooden enclosures. We're not able to use all recycled materials, obviously, and I've never actually calculated the percentage, but a high percentage of the materials in our products are repurposed."
"If you saw our warehouse, we probably have about 100 organs that are not disassembled and another 200 that are." —Ben Juday, Analog Outfitters
But Juday is motivated by more than just green considerations; he also thinks old organs, particularly their output transformers, sound great. He says vintage transformers, like vintage pickups, possess a special mojo not usually found in newer gear. "Many vintage transformers have that same magic sound and it has to do with how they were wound," he says. "They used methods that are more expensive to do and today people have taken shortcuts. The thing to remember about a guitar amp—a tube guitar amp—is that the output transformer is the most important part of the whole amp. It's like the transmission in your car. I don't care how good your engine is, if you don't have a way to harness that power with a good transmission, you're not going anywhere. It's the same thing with a guitar amp. The output transformer takes the energy created by that amplifier and couples it to your speaker. If you don't have a good coupling device, you're never going to get the tone that you want."
Building amps from repurposed materials isn't simple or cheap. "It's not like we just flip a few wires," Juday says. It's a painstaking process that involves transporting, dismantling, cataloging, and warehousing the reclaimed materials. "If you saw our warehouse, we probably have about 100 organs that are not disassembled and another 200 that are—the transformers are here, the amp chassis are here, the speakers go over here, the wood is catalogued here, the wiring goes here. It's a pretty involved process." Plus, reworking an existing chassis also involves a lot of metal work, like drilling new holes and stripping away unwanted parts. "It probably takes more labor to do it the way we do, but the best form of recycling is repurposing and we really are repurposing a lot of those old parts."
Here's Analog Outfitters Scanner that was reviewed by PG and is used onstage by Doyle Bramhall II.
Analog Outfitters doesn't just build amps. They make the Scanner, which repurposes the vibrato and reverb units from old Hammond organs. They make a MIDI controller from repurposed keyboards. They use the organ's wood—when they're not using decommissioned street signs—to make speaker cabinets and enclosures. But they can't use everything.
"People try to give us organs from the '70s," Juday says. "We have to say no, because the wood that they used was particle chipboard, which is essentially junk, and the amps were transistor based. So those 1970s organs are of no value to us. We don't have the room to take those and to try to recycle them. But anything from the '50s or '60s, that used real solid wood and vacuum tube components, has value to us."
Part III: Wood
Bob Taylor walks in the Cameroon bush during a visit in 2017. Taylor Guitars—in partnership with Madinter Trade, a Spain-based supplier of tonewoods—recently purchased an ebony mill in Cameroon, an African country on the Gulf of Guinea.
Photo courtesy of Taylor Guitars
In January 2017, CITES, the Convention on International Trade in Endangered Species, which, according to their website, is "an international agreement between governments whose aim is to ensure that international trade in specimens of wild animals and plants does not threaten their survival," listed the entire Dalbergia genus—i.e. every species of rosewood—as Appendix II. That means, in a nutshell, that rosewood is considered a species at risk and its international usage is regulated.
Needless to say, that sent the guitar world into a tizzy.
"Basically, what happened is there has been growing demand for rosewood, mainly from China," Eric Meier, the author of WOOD! Identifying and Using Hundreds of Woods Worldwide and the administrator of The Wood Database, says. "I'm not trying to completely blame the Chinese, but they have a growing middle class and a cultural tradition of rosewood furniture. The resurgence in demand for rosewood furniture is an unprecedented amount of global demand, which was the main contributing factor. Obviously, there are other factors as well, but that was the main contributing factor for the CITES decision. CITES controls how and when wood moves across international borders."
However, according to Meier, the regulation does have a provision for touring musicians. "This doesn't affect Brazilian rosewood, which has always been restricted," he says. "But for the other species of rosewood they've put the limit at 10 kilograms (about 22 pounds) and non-commercial. Basically, as long as you're not selling the instrument—it isn't a commercial transaction, you're just traveling with it—then it's exempted."
"One small piece of rosewood on the guitar makes it a CITES-controlled product, forever." —Bob Taylor, Taylor Guitars
That isn't the case if you want to sell a guitar, even if you're selling a used instrument. "It's affected the guitar business in a negative way," Bob Taylor, the founder and CEO of Taylor Guitars, says. "People think that the 'guitar business' is conducted only by corporations. That is a false idea, because guitars are durable and last for a century or more. In that time, those guitars will have many owners. In today's world, individuals sell used guitars all day every day, often across borders. This doesn't happen with flooring, or even most furniture, for example. It's just as illegal for a person with a 20-year-old guitar to sell it across a border without all the proof and paperwork as it is for Taylor Guitars to do so with a new guitar. As the CITES rosewood regulation is currently written, it criminalizes people who have no idea or even the ability to know about the legality of a certain guitar. One small piece of rosewood on the guitar makes it a CITES-controlled product, forever. You can see the problem with this. It's relatively easy for Taylor Guitars to comply because we are a business and we deal in new guitars. We know exactly what pieces of wood are in them, their botanical names, where they came from, and we have the accompanying proof. We also know the management authorities around the world. We have the good fortune of a good reputation. We know how to file the paperwork. It isn't easy, but we can comply. It's very hard for an individual, who is the third owner of a guitar to comply, because he has to know all this, too, and prove it."
The challenge is greater for smaller, boutique builders—especially those who have been in business for a long time. "Most of the sources that we have always gotten wood from—and 'we' means the guitar-building community at large—are places that have done this forever," Amilcar Dohrn-Melendez, the materials buyer for Ryan Guitars, says. "A lot is older material, which is really good for us, and is the stuff that's harder to track. Kevin [Ryan] has been building for 30 years and he has material that is that old. Most shops do. When you get serious about building guitars, a lot of your investment early on is to get those source materials. You can use them forever and the longer they cure, the better. Guitar builders are wired to be like squirrels and keep gathering stuff. But how do you find out who the person you bought it from bought it from if you bought it 10 years ago? You can imagine, if it was longer than 15 or 20 years ago, it's just a wash in terms of how any of us kept track."
"We're married to ebony because it works," says Bob Taylor. "Substitutes don't work as well. Plus, they have their own sustainability problems." This majestic ebony tree resides in a forest in Cameroon, in Central Africa.
Photo courtesy of Taylor Guitars
Ebony is another wood the guitar building community is concerned about, especially since it's one of the best woods to use for fretboards. "As a builder, one of the things I would say about ebony is that structurally it takes frets really well," Dohrn-Melendez says. "The density and how stiff it is—even compared to rosewood—frets just grab on and hold on like you want them to."
"We're married to ebony because it works," Taylor adds. "Substitutes don't work as well. Plus, they have their own sustainability problems. It's good to realize that guitars aren't the only instruments that depend upon ebony. Violins, cellos, contra-basses, also use it. I think it's better to conserve and regrow ebony than to look for alternatives."
Along those lines, Taylor—in partnership with Madinter Trade, a Spain-based supplier of tonewoods—purchased an ebony mill in Cameroon. Learning about woods at their source changed Taylor's opinion about what types of ebony were suitable for use. "When we first arrived, we found out from suppliers that they cut down many trees to find one with a pure black heart. Not all ebony trees are pure black and many trees were simply left to rot. That was not acceptable to us. I thought the wood was beautiful, and I felt I was in a position—not as a supplier of ebony, but as a maker of guitars—to change perception. Today, we are repurposing much of the colored wood into sides and backs. We had to build a lot of capabilities, but it's a great use of that material, and we don't have to depend upon using it solely on fingerboards."
Taylor Guitars is committed to replanting and conserving ebony through the Cameroon Project. The first stage of the project planted 15,000 seedlings in the Crelicam nursery, with the goal of supplying instrument manufacturers with high-quality ebony in the future.
Photo courtesy of Taylor Guitars
Part of the challenge, in terms of sustainability, is that trees take a long time to grow. "Some of the controversy in Madagascar was someone cut down protected trees in the national forest," Meier says. "The trees were 200 or 300 years old. Yes, trees can grow back, but if you just consider that that was a 200-year-old tree—there is an element of timing. Is it realistically going to be sustainable in our lifetime?"
However, in spite of that, Taylor is planting new trees. "We have a huge project to replant ebony and it's in full swing," Taylor says. "In fact, we just signed a public-private partnership with the government of Cameroon on November 14, 2017, at the United Nations Climate Change Conference in Bonn, Germany, to cooperate on our initiative. We are partnered with the Congo Basin Institute in Yaoundé, Cameroon, which has UCLA as the driving partner. Professor Tom Smith, the director of the Center for Tropical Research, has spent 35 years working in Cameroon on forest-related science. There is top-notch science being implemented with them as our partner. Together, we are making progress planting ebony as well as fruit and medicine trees in villages, and the villages own these projects. This first stage of the project will plant 15,000 ebony trees. My partner Vidal de Teresa from Madinter Trade in Spain oversees the work."
One thing that isn't possible—at least not on a significant scale—is growing these tropical trees in greenhouses. "What you need is good site location, good soil, and good seeds," Taylor says. "Hawaii is a contender to grow ebony, rosewood, and mahogany. There's a lot of mahogany already on Hawaii, so we know it grows well there. There is also the topic of improving the species through planting shoots from a good tree, thus copying that tree's qualities. With time, we may be able to crossbreed trees as well to make certain varieties that serve us well, just like it's done with edible plants. While we haven't crossbred anything yet, we have grown new trees from cuttings of trees we like."
"The environment that these trees grow in has so much to do with what they become as trees and, then by proxy, how we can use them as builders," Dohrn-Melendez says. "It's a difficult thing to manufacture. For example, you have to have a rainforest if you want to grow Brazilian rosewood. You might not have to go to Brazil, but Nebraska isn't going to cut it."
[Updated 8/10/21]
- The Environmentally Conscious Guitarist - Premier Guitar ›
- DIY: How to Install Onboard Effects - Premier Guitar ›
- Tone Tips: Is Rock Guitar Eating Itself? - Premier Guitar ›
- How Pedal Buyers and Builders Can Help Save the Planet - Premier ... ›
- The String Tension Follies Experiment, Continued - Premier Guitar | The best guitar and bass reviews, videos, and interviews on the web. ›
- How to Pick your Pick - Premier Guitar | The best guitar and bass reviews, videos, and interviews on the web. ›
- String Myths, Part 1 - Premier Guitar ›
- String Myths, Part 1 - Premier Guitar ›
- The Recording Guitarist: Should You Change Your Electric's Strings Before Tracking? - Premier Guitar ›
- The Recording Guitarist: Should You Change Your Electric's Strings Before Tracking? - Premier Guitar ›
“Get It Right, Get It Fast”: Jerry Douglas on Bluegrass History and Session Secrets
The legendary Dobro player talks about how to get session work, working with Allison Kraus, and the “baton pass” involved in recording great songs.
Bluegrass music is bigger than a genre. It’s become an entire world of ideas and feelings in the popular American imagination. And musician Jerry Douglas has been a key part of its celebration and revival over the past 30 years. “It's an old form of music that came from people in the south playing on the porch and became this juggernaut of a genre,” says Douglas. “It’s a character. It's a physical music.”
Douglas has racked up an impressive cabinet of accolades, including Grammys, American Music Association Awards, and International Bluegrass Music Association Awards. He’s been dubbed the CMA Awards’ Musician of the Year three times, and played with everyone from Allison Krauss and Elvis Costello to Bela Fleck and John Fogerty. He’s an encyclopedic guide to contemporary American roots music, and on this episode of Wong Notes, he walks Cory Wong through the most important moments in his 50-year career.
Tune in to hear Douglas’ assessment of bluegrass’ demanding nature (“Honestly, there's not so many genres nowadays that require as much technical facility as something like bluegrass”), what’s required of roots players (“Get it right, get it fast, make it hook”), and why the O Brother, Where Are Thou? soundtrack connected with so many listeners. Wondering how to get involved with session work? Douglas says there’s no one-size-fits-all answer, and what worked for him might not work today. The key is to be dynamic—and know when to keep your mouth shut.
There are plenty of gems in this interview, like Douglas’ thoughts on what makes a good solo, but the most significant might be Douglas’ big takeaway from decades of sitting in on communal roots-music sessions. “We can play in all genres,” says Douglas. “We just have to listen.”
Listen to the new track from Joe Satriani, Eric Johnson, and Steve Vai's G3 Reunion Live.
Joe Satriani, Eric Johnson, and Steve Vai returned to the G3 touring concept in 2024 for a sold-out US tour. This was the original G3 lineup that saw the three virtuosos first share a stage back in 1996. Each guitarist plays a full set with their own band and then the three join together for an encore jam.
"G3 Reunion Live" is much more than “just” a live album. It’s a full album-length set from each artist plus a collaborative supergroup LP. The deluxe edition features a different colored vinyl for each artist, a special splatter LP for the encore jam, and a 64-page photo book, divided into artist and jam chapters, with the full program also on 2 CDs. It is also available in a 2CD digipak with a 16-page photo booklet, 4 LP gatefold and digital download.
For more information, please visit satriani.com.
PG contributor Zach Wish demos Orangewood's Juniper Live, an all-new parlor model developed with a rubber-lined saddle. The Juniper Live is built for a clean muted tone, modern functionality, and stage-ready performance.
Orangewood Juniper Live Acoustic Guitar
- Equipped with a high-output rail pickup (Alnico 5)
- Vintage-inspired design: trapeze tailpiece, double-bound body, 3-ply pickguard, and a cupcake knob
- Grover open-gear tuners for reliable performanceReinforced non-scalloped X bracing
- Headstock truss rod access, allowing for neck relief and adjustment
- Light gauge flatwound strings for added tonal textures
After decades of 250 road dates a year, Tab Benoit has earned a reputation for high-energy performances at clubs and festivals around the world.
After a 14-year break in making solo recordings, the Louisiana guitar hero returns to the bayou and re-emerges with a new album, the rock, soul, and Cajun-flavoredI Hear Thunder.
The words “honesty” and “authenticity” recur often during conversation with Tab Benoit, the Houma, Louisiana-born blues vocalist, guitarist, and songwriter. They are the driving factors in the projects he chooses, and in his playing, singing, and compositions. Despite being acclaimed as a blues-guitar hero since his ’80s days as a teen prodigy playing at Tabby Thomas’ legendary, downhome Blues Box club in Baton Rouge, Benoit shuns the notion of stardom. Indeed, one might also add simplicity and consistency as other qualities he values, reflected in the roughly 250 shows a year he’s performed with his hard-driving trio for over two decades, except for the Covid shutdown.
On his new I Hear Thunder, Benoit still proudly plays the Fender Thinline Telecaster he purchased for $400 when he was making his debut album in Texas, 1992’s Nice & Warm. After that heralded release, his eclectic guitar work—which often echoes between classic blues-rock rumble-and-howl, the street-sweetened funk of New Orleans, and Memphis-fueled soul—helped Benoit win a long-term deal with Justice Records. But when the company folded in the late ’90s, his contract and catalog bounced from label to label.
Tab Benoit - "I Hear Thunder"
This bucked against Benoit’s strong desire to fully control his music—one reason he settled on the trio format early in his career. And although his 2011 album, Medicine, won three Blues Music Awards—the genre’s equivalent of Grammys—he stopped recording as a leader because he was bound by the stipulations of a record deal, now over, that he deemed untenable.
“I wanted to make records that reflected exactly how I sounded live and that were done as though we were playing a live concert,” Benoit says. “So, I formed my own label [Whiskey Bayou Records, with partner Reuben Williams] and signed artists whose music was, to me, the real deal, honest and straightforward. I couldn’t do anything on my own, but I could still continue putting out music that had a positive impact on the audience.”
Benoit’s new album, which includes Anders Osborne and George Porter Jr., was recorded in the studio at the guitarist’s home near the bayou in Houma, Louisiana.
Those artists include fellow rootsers Eric McFadden, Damon Fowler, Eric Johanson, Jeff McCarty, and Dash Rip Rock. Benoit also spent plenty of time pursuing his other passion: advocating for issues affecting Louisiana’s wetlands, including those around his native Houma. His 2004 album was titled Wetlands, and shortly after it was issued he founded the Voice of the Wetlands non-profit organization, and later assembled an all-star band that featured New Orleans-music MVPs Cyril Neville, Anders Osborne, George Porter Jr., Big Chief Monk Boudreaux, Johnny Vidacovich, Johnny Sansone, and Waylon Thibodeaux. This ensemble, the Voice of the Wetlands All-Stars, has released multiple CDs and toured.
Essentially, Benoit comes from the bayous, and when it’s time to record, he goes back to them, and to the studio he has in Houma, which he refers to as “the camp.” That’s where I Hear Thunder came to life. “George and Anders came to me and said, ‘Let’s go make some music,” Benoit offers. “So, we went out to the camp. They had some songs—and George and Anders and I go back so many years it was really a treat to put everything together. It only took us a couple of days to do everything we needed to do.”
“George Porter and Anders Osborne and I saw this alligator sitting around the boat where we were writing the entire time. I guess he really liked the song.”
I Hear Thunder has become his first number one on Billboard’s blues chart. Besides the fiery-yet-tight and disciplined guitar work of Benoit and Osborne, the latter also an esteemed songwriter, the album features his longtime rhythm section of bassist Corey Duplechin and drummer Terence Higgins. Bass legend Porter appears on two tracks, “Little Queenie” and “I’m a Write That Down.” Throughout the album, Benoit sings and plays with soul and tremendous energy, plus he handled engineering, mixing, and production.
Once again, that ascribed to his aesthetic. “My main reason for taking on those extra duties was I wanted to make sure that this recording gives the audience kind of a preview of how we’re going to sound live,” he declares. “That’s one of the things that I truly don’t like about a lot of current recordings. I listen to them and then see those guys live and it’s like, ‘Hey, that doesn't sound like what was on the album.’ Play it once or twice and let’s run with it. Don’t overdo it to the point you kill the honesty. All the guys that I love—Lightnin’ Hopkins, Albert King—they played it once, and you better have the tape machine running because they’re only going to give it to you that one time. That’s the spontaneity that you want and need.
“One of the reasons I don’t use a lot of pedals and effects is because I hate gimmicks,” he continues. “ I’m playing for the audience the way that I feel, and my attitude is ‘Let’s plug into the guitar and let it rip. If I make a mistake, so be it. I’m not using Auto-Tune to try and get somebody’s vocal to seem perfect. You think John Lee Hooker cared about Auto-Tune? You’re cheating the audience when you do that stuff.”
Tab Benoit’s Gear
Benoit in 2024 with his trusty 1972 Fender Thinline Telecaster, purchased in 1992 for $400. Note that Benoit is a fingerstyle player.
Photo by Doug Hardesty
Guitar
- 1972 Fender Telecaster Thinline
Amp
- Category 5 Tab Benoit 50-watt combo
Strings
- GHS Boomers (.011–.050)
The I Hear Thunder songs that particularly resonate include the explosive title track, the soulful “Why, Why” and the rollicking “Watching the Gators Roll In,” a song that directly reflected the album’s writing experience and environment. “George and Anders and I saw this alligator sitting around the boat where we were writing the entire time. I guess he really liked the song. He’d be swimming along and responding. That gave it some added punch.” As does Benoit and Osborne’s consistently dynamic guitar work. “I’m not one of these people who want to just run off a string of notes or do a lot of fast playing,” Benoit says. “It has to fit the song, the pace, and most of all, really express what I’m feeling at that particular moment. I think when the audience comes to a show and you play the songs off that album, you’ve got to make it real and make it honest.”
When asked whether he ever tires of touring, Benoit laughs and says, “Absolutely not. At every stop now I see a great mix of people who’ve been with us since the beginning, and then their children or sometimes even their grandchildren. When people come up to you and say how much they enjoy your music, it really does make you feel great. I’ve always seen the live concerts as a way of bringing some joy and happiness to people over a period of time, of helping them forget about whatever problems or issues they might have had coming in, and just to enjoy themselves. At the same time, I get a real thrill and joy from playing for them, and it’s something that I always want the band’s music to do—help bring some happiness and joy to everyone who hears our music.”
YouTube It
Hear Tab Benoit practice the art of slow, soulful, simmering blues on his new I Hear Thunder song “Overdue,” also featuring his well-worn 1972 Telecaster Thinline.