Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Eventide UltraTap Review

"Single-function" in name only, this inspiring multi-tap delay excels at everything form tough rock to spacy, experimental sounds.

A plethora of inspiring multi-tap echo sounds for just about any style. Wonderfully streamlined and easy to use. Pristine, lovely fidelity.

Takes more effort than traditional stompboxes to get the real goods.

$279

Eventide UltraTap
eventideaudio.com

5
5
4
5

The Eventide UltraTap puts the multi-tap delay power of the company's famous late-'80s H3000 rack unit (which attracted players like Eddie Van Halen and Steve Vai) into a streamlined, single-effect pedal format. Of course, that same algorithm is also in Eventide's ultra-deep H9 multi-effect pedal. But UltraTap nixes the H9's multi-function knob, LCD display, and multitudes of menus and other effects in favor of a more conventional stompbox design capable of controlling up to 64 delay "taps" (kinda like 64 playback heads on an Echoplex tape delay with pristine digital fidelity), up to four seconds of delay time, and a whole slew of otherworldly modulation sounds. All that is available via just six knobs (mix, taps, length, feedback, spread, and taper), a pair of footswitches, and a couple of buttons—or by interfacing with your computer.


Minimal Tapping, Maximum Ping-Pongin'

While the UltraTap is dedicated to delay, there is still a lot going on. It comes with five onboard factory presets (indicated by the LED "ladder" at left and cycled via the right-side footswitch) and the ability to swap them out for any of 41 others included with the downloadable Eventide Device Manager software (for Mac or Windows). Additionally, the manager offers 81 user slots (for a total of 127) for building and saving your own sounds.

Recorded with a Curtis Novak-loaded Telecaster into a SoundBrut DrVa MkII drive, a Ground Control Tsukuyomi mid boost, the UltraTap, and both a Fender Vibrolux Reverb (miked with a Royer R-121) and a Fender Rumble 200 1x15 (miked with an Audix D6) feeding an Audient iD44 interface with no EQ-ing, compression, or effects.

If the thought of having to plug a pedal into your computer makes you queasy, rest assured the software is very self-explanatory and blessedly spartan: Presets are listed along the right margin and placing one into an UltraTap preset location is as easy as dragging it to one of the top five slots and letting go of the mouse button. The manager also avails control of UltraTap's myriad auxiliary functions—from MIDI-control channels to expression-pedal parameter assignment, bypass mode, and more. There are also graphical representations of the UltraTap's six top-panel knobs and another six representing their secondary functions, which you access by holding the triangle button at upper right on the pedal.

Never Tapped Out

For many players, it's easy to read technical stuff like this and think, "What the hell would I do with all that?" But just because a pedal can do many things doesn't mean that's how you have to use it. Indeed, many artists have told us in Rig Rundowns that they only use the more powerful H9 for one or two out-of-this-world sounds. (On the flip side, don't underestimate how many useful, inspiring sounds you can get out of a pedal that's "just a delay.")

"What's perhaps neatest of all is how rhythms created by the various "playback heads" … can push you in creative directions you may never have gone before."

Though I'm typically a one-delay-pedal guy, I was drawn to the UltraTap's ability to dial up hauntingly smudged (or slurmed, as Eventide calls it) delays of the sort Andy Summers would use for his trademark wide, clean-toned arpeggios. It's equally great for chopped, stuttering LFO textures, cathedral-esque valleys that seem to extend for miles, disorienting trippiness that Jonny Greenwood might have used for OK Computer, and even great small-room sounds that inspire tough Brit-rock riffing. What's perhaps neatest of all is how rhythms created by the various "playback heads"—whether they're multi-taps you dream up, or ones Eventide put into the manager—can push you in directions you may never have gone before.

The Verdict

While more complicated than your average delay unit, the Eventide UltraTap strikes a pretty killer balance between straightforward operation and nearly boundless possibilities. What's more, succinct documentation, clear labeling, helpful videos, and nearly foolproof editor software should take the jitters out of all but the most tech-averse players. Especially because once you get the pedal set, it's a piece of cake to use it just like your other "plug-and-play" stomps.

With a team of experts on hand, we look at six workhorse vintage amps you can still find for around $1,000 or less.

If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.

Read MoreShow less

Amazon Prime Day is here (July 16-17). Whether you're a veteran player or just picking up your first guitar, these are some bargains you don't want to miss. Check out more deals here! https://amzn.to/3LskPRV

Read MoreShow less

A technicolor swirl of distortion, drive, boost, and ferocious fuzz.

Summons a wealth of engaging, and often unique, boost, drive, distortion, and fuzz tones that deviate from common templates. Interactive controls.

Finding just-right tones, while rewarding, might demand patience from less assured and experienced drive-pedal users. Tone control could be more nuanced.

$199

Danelectro Nichols 1966
danelectro.com

4.5
4
4
4.5

The Danelectro Nichols 1966, in spite of its simplicity, feels and sounds like a stompbox people will use in about a million different ways. Its creator, Steve Ridinger, who built the first version as an industrious Angeleno teen in 1966, modestly calls the China-made Nichols 1966 a cross between a fuzz and a distortion. And, at many settings, it is most certainly that.

Read MoreShow less

The author standing next to a Richardson gunstock lathe purchased from Gibson’s Kalamazoo factory. It was used to make six necks at a time at Gibson in the 1950s and 1960s.

Keep your head down and put in the work if you want to succeed in the gear-building business.

The accelerated commodification of musical instruments during the late 20th century conjures up visions of massive factories churning out violins, pianos, and, of course, fretted instruments. Even the venerable builders of the so-called “golden age” were not exactly the boutique luthier shops of our imagination.

Read MoreShow less