
A very Vox-like template yields a surprising wealth of trans-Atlantic tones—all in a light, compact head.
Relatively small and light. All-tube power and preamp sections. Surprising versatility for a single-channel format.
You’ll have to be willing to tinker a lot with the EQ to tap into the maximum number of sounds.
$1,499
Victory The Deputy Compact Guitar Head
victoryamps.com
If a venue’s dimensions demand you turn down, you might as well lighten your load.Victory Amps are hip to this trade-off. Their line is now thickly populated with amps that are smaller, quieter, but still sound massive.
The EL86-driven, 25-watt, single-channelThe Deputy Compact Head is the newest of Victory’s mighty mites. Although it’s generally lunchbox-sized, The Deputy looks like a proper amp head—eschewing the mostly metal, vented enclosure design used in some other Victory offerings. Created in conjunction with Pete Honoré (known to many YouTube guitar heads as Danish Pete), The Deputy Compact Head aims to span ’60s British-style clean tones and ’70s classic-rock overdrive. It’s truly compact at 15" x 8" x 7.5" and 17.6 pounds.
Dawg Daze
Other than the bijou size, which is not unusual these days, The Deputy stands out for its use of EL86 output tubes. Although it can be re-biased to use the more common EL84, Victory ships the head with a pair of new-old-stock EL86 tubes which are broadly similar to EL84s in character and output power—though capable of a little more of it from a little less voltage. They are also relatively available and affordable as NOS components. The preamp is driven by three 12AX7s. Rectification is solid-state.
The straightforward controls include gain, treble, middle, bass, reverb, and master, plus a 2-way bright switch and a 3-way voice switch. The latter is arguably more of a gain-structure switch, though gain, voice, and tone are often used interchangeably in guitar-speak. The amp’s lowest gain setting is accessed via the upper position. The middle position stacks another +6 dB of gain on top of that, and the lower position adds upper-mid and treble on top of the extra 6 dB. As for the reverb, Victory describes it as a mix of plate- and hall-type textures, and it is probably meant to sound a bit more contemporary, studio-like, and less specific than a traditional spring reverb.
The amp’s back panel includes send and return jacks for the series effects loop, two 8-ohm speaker outputs and one 16-ohm output, bias checkpoints, and a bias adjustment pot. Rather than being cathode-biased like most EL84 amplifiers, The Deputy’s EL86s are run in adjustable fixed bias, which delivers slightly tighter, firmer response from any given pair of tubes, while maximizing their output potential (all else being equal). As such, you need to check and adjust this setting when replacing the EL86s or substituting EL84s. The Deputy’s circuit is arranged on a rugged printed circuit board, the components are all high quality, and the transformers are U.K.-made.
Hot Lunch
I tested The Deputy with an open-back 1x12 cabinet equipped with a Scumback J75 and a closed-back 2x12 with Celestion M65 Creambacks. I also paired it with a Gibson ES-355, a Fender Stratocaster, a selection of overdrive pedals at the front end, and a Source Audio Collider in the effects loop for delay and reverb. Almost regardless of what’s in the mix, The Deputy is a great-sounding little head. In fact, any sense of “little” largely vanishes from consideration once you start playing it. Full, fat, deep, clear, and vintage-leaning, with a character that’s very much its own, The Deputy doesn’t care if there’s a stompbox anywhere in sight, but it’s also an excellent pedal platform.
The Deputy’s tube complement and Victory’s English origins might imply that strictly Vox-like voices emit from this diminutive head, but the circuit enables many more trans-Atlantic sounds. With the EQ dialed in right and the bright switch engaged, The Deputy will indeed cop AC-style tones on the clean and crunchy side of that spectrum. But the robust preamp voicing and fixed-bias output stage—as well as the solid-state rectification—lend a tautness that enables convincing Fender-like tones when you want them. By dialing down the middle control to around 10 o’clock with the voice in the low-gain position, the gain below noon, and master just advanced from midday, I heard pretty good Deluxe Reverb sounds. There’s certainly more than just one breed of clean to source.
On the whole, I preferred heavier amp-generated crunch and lead sounds with the voice switch in the middle position, the bright switch off, and a little bump from the midrange control. Set this way, The Deputy lends thickness to a Strat without adding harsh or spiky clipping, while the ES-355’s humbuckers are blissfully muscular and aggressive. With more conservative gain settings, the extra upper mid and high end from the brighter voice add cutting power and a shimmering, cranked-Vox-like character that plays well with many styles. Add digital reverb—which moves readily from “just a touch” to an evocative atmospheric wash—and the palette of tones at hand becomes even more impressive.
The Verdict
With an able assist from Pete Honoré, Victory has pulled off another deft design. It’s a toneful performer that can sound and feel bigger than it is. For a single-channel head, it’s crazy versatile—with or without pedals. But if you’re into economy on the equipment and cost fronts, you’re bound to be pleased with how much you can do with this high-quality, diminutive head, a cab, a guitar, and nothing else.
Victory Amplification The Deputy 25 25-watt Tube Amplifier Head
Deputy 25W Tube Head- Pairing Amps for Golden Tones ›
- Tube Amp Troubleshooting 101 ›
- Tone Tips: Dialing in Your Gear for Great Sound ›
A satin finish with serious style. Join PG contributor Tom Butwin as he dives into the PRS Standard 24 Satin—a guitar that blends classic PRS craftsmanship with modern versatility. From its D-MO pickups to its fast-playing neck, this one’s a must-see.
PRS Standard 24 Satin Electric Guitar - Satin Red Apple Metallic
Standard 24 Satin, Red App MetIntroducing the new Firebird Platypus, a tribute to the rare transitional models of 1965.
In early 1965, the original Firebird design transitioned through several different iterations. One of the significant transitions that occurred flipped the headstock to the Non-Reverse shape. Unlike the original Reverse Firebird headstock design, which featured a two-layered headstock with a holly veneer, the new headstock was flat, like the bill of a platypus.
Mahogany body and glued-in mahogany neck
The Firebird Platypus has a mahogany body with the appearance of a traditional neck-through Reverse Firebird body for that classic Reverse Firebird appearance, while the neck of the Firebird Platypus uses glued-in, set neck construction like the Les Paul and SG and delivers outstanding sustain and resonance.
Platypus transitional headstock design
The headstock features the flat, transitional style “platypus” design that was found only on rare models from the 1965 transitional period when the Firebird was gradually switching over from the features found on the original models that were released in 1963 to the features that were used for the later Non-Reverse Firebird models.
Firebird humbucker pickups
It’s outfitted with two Firebird humbucker pickups. These pickups are equipped with Alnico 5 magnets and have a unique sound that is not quite like any other humbucking pickup, with unmatched clarity, chime, and bite. They sound great for both clean and overdriven tones.
Exclusive Cherry Sunburst finish
This exclusive Cherry Sunburst finish is available only on Gibson.com and at the Gibson Garage.
For more information, please visit gibson.com.
The exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
This forward-thinking custom guitar commissioned by our columnist makes a special case for partnership in the guitar building community.
Owning a guitar shop, your brain is full of to-do lists, questions, and plenty of compulsive thoughts over details. And when you run a shop that specializes in custom builds that you spec out from boutique companies, the ideas for these guitars often come at the most random times of day (and night). While I don’t subscribe to the notion of fate, the following makes a case for its existence.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, I’m never shy about talking up builds from any of our vendors. Spec’ing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuff—sort of a “game recognizing game” kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Tim’s response was something like, “Oh wow! That’s really cool. Their stuff is amazing and we have a lot of respect for those guys.” At first, I thought he was just being polite, but I’ve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: “Why aren’t guitar companies like that?” “Why can’t we do a collab guitar?”
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was “Hell yeah, let’s do it!” and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortions—the first pedal I bought from Caroline in 2013—that he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that I’m not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmen—and who truly geek out over each other’s work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that I’ve clung to and has inspired me for most of my life. There is a cliché about the journey being greater than the destination, and while the destination in this case is one of the finest guitars I’ve ever laid my hands on, I’d have to say it holds true
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.