From vintage to modern, single-coil to humbucker, wide range to gold-foil, and just about anything else you can dream up, the world of JM-style pickups just keeps getting bigger.
If youāre into modding guitars, there has never been a better time in terms of options for hardware, electronic components, and, of course, pickupsāāespecially for fans of Fender offsets, where one quick Google search calls up an embarrassment of riches.
Over the last 20 years, pickup winders have benefitted these oft-maligned musical marauders by bringing to market a near-endless array of tone-twisting options. But with so many to sift through, it can be a tall order to pick out the crĆØme de la crĆØme.
If youāre looking to change up the sound of your Jazzmaster, hereās a rundown of some of my favorites from having swapped out hundreds upon thousands of pickups over the years.
Setting a Baseline
Itās a fairly safe assumption that the majority of you reading this article might be starting with stock Fender pickups, whether your guitar is a Squier, MIM, MIJ/CIJ, or U.S. model. Even within that space, Fender hasnāt made it too easy to know what it is you actually have. The popular Squier J Mascis model, for instance, features P-90s stuffed under Jazzmaster covers; same goes for the Classic Player line.
What exactly is a āproperā Jazzmaster pickup, then? Succinctly, itās a wide, flat coil wound hot around six alnico rod magnet poles. Fenderās popular Pure Vintage ā65s fit that bill, so letās use them as our baseline here. Theyāre a fine representation of what a Jazzmaster sounds like, though Iād point out that theyāre a bit thin and underpowered at 6.5k ohms, compared with actual vintage units which typically measure out in the mid 7s through the high 8s.
So, where do we go from here? Letās start with āvintageā sounds, then work our way forward in time.
The black-bobbin pickups on early ā58āā62 models are generally louder and darker than the gray-bobbin ones found on ā64 and later guitars, with a few changes to wire type and magnet type in between that had a marked effect on the sound. For era-correct tones, I recommend the following, broken into two generalized groups:
ā50s
Seymour Duncan Antiquity I Jazzmaster pickups, sans cover
Seymour Duncanās Antiquity I ($238/set street) set is a great over-the-counter option for a fuller, more present pickup that will add some much-needed girth to your sound. They feature alnico 2 rod magnets and average DC resistance over 8k in both positions, and are wax-potted to reject feedback.
The Antiquity I bridge pickup shines with some sorely-needed low end, while the neck pickup stays warm and syrupy. These are great if you want to tackle jazz and rock tones with your offset.
āThe black-bobbin pickups on early ā58āā62 models are generally louder and darker than the gray-bobbin ones found on ā64 and later guitars, with a few changes to wire type and magnet type in between that had a marked effect on the sound.ā
In need of a more robust treatment? Curtis Novakās Historic line seeks to faithfully replicate four different eras of Jazzmaster pickup construction, but Curtisā finely tuned ear has allowed him to hone in on the specs and frequencies that really make a guitar sing.
Guitars lacking low-midrange thickness can be improved with Novakās Historic ā58 ($145 street) set and ā58-FAT models ($170 street), the latter adding even more heft to the bridge position and making it ideal for distorted tones. Rich and decadent like lava cake, the Historic ā58 is among my most recommended sets.
ā60s
Seymour Duncanās Antiquity II ($238/set street) strikes out at that mid-1960s Jazzmaster sound: brighter, sweeter, clearer. Featuring A5 magnets with similar resistance readings to the AI set, the added treble zing makes these pickups great choices for twangy surf, country, and 2020s lightly driven indie tones.
Back to Curtis Novak, he once again rises to the challenge with his Historic 1960-1964 ($145 street) and 1965-1969 ($145 street) sets, both of which emphasize treble definition with relaxed midrange. Quintessentially ā60s, any of the above options will jangle to your heartās content.
Time Travelling
Now, the fun of having such distinct eras of pickups to choose from is the ability to mix and match tones for your own needs. When Iām building sets for a specific guitar, Iāll grab an Antiquity I bridge and a II for the neck, or a Novak ā58-Fat and ā64 combo which lets me get the best of both eras: a darker, heartier bridge pickup with a brighter neck, with the added bonus of a thrillingly complex middle position.
The point is: donāt be afraid to experiment with different pickups in either position!
Modern
A beloved Creston JM with Lollar Jazzmaster pickups
For many years at this point, Jason Lollar made a singular Jazzmaster set that served as the benchmark of a good, strong-sounding pickup. Like everything that comes out of his shop, that set has a sort of hi-fi quality to it: lots of clarity, dynamic articulation, perfectly suited for blues, rock, or funk sounds.
Thatās not to say Lollarās Jazzmaster pickups hold no connection to their Fender forebears, but rather that the Lollar sound is so unique and refined that categorizing them as purely āvintageā feels unnecessarily limiting.
That set is still in production, recently renamed Lollar Original ā58 ($115 street) but retaining its design hallmarks, including radiused pole pieces for truly balanced string-to-string response and a mid-8k DC resistance range. Itās a classy affair that feels like dressing up your guitar in a tuxedo. The nameās Lollar. Jason Lollar.
āWhen Iām building sets for a specific guitar, Iāll grab an Antiquity I bridge and a II for the neck, or a Novak ā58-Fat and ā64 combo which lets me get the best of both eras: a darker, heartier bridge pickup with a brighter neck, with the added bonus of a thrillingly complex middle position.ā
Along with that name change, Lollar has also introduced a companion set known as the Lollar ā63 ($115 street), based on the pickups found in repair tech Jeff Hoppeās personal instrument. The ā63 incorporates a fuller-sounding neck pickup, flat A2 poles, and matched DC resistance readings between the pickups for a bright yet percussive voice.
Last but not least, thereās also the exclusive Lollar Black Bobbin set, a co-venture with the Chicago-based shop helmed by Shelby Pollard. With radiused A2 poles and lower output, this set mimics the sound of 60-year-old pickups for a darker tone than the Original ā58.
The authorās ā58-style holoflake JM loaded with a set of Sunday Handwoundās 5859s
I would be remiss if I also didnāt give a shoutout to Sunday Handwound and their incredible 5859 set ($145/set). The name might fool you into thinking this recommendation belongs in the āvintageā category, but like the Lollars, this set takes its inspiration from the old and blends it with the new.
Inspired by a custom Stratocaster set wound for a customer, the 5859s retain the general Jazzmaster construction ethos with some careful re-voicing to make them bigger, bolder, and punchier than youāre likely to hear from stock pickups. Better yet, the bridge is overwound for a meaner personality, making it ideal for heavier single-coil tones.
I have the 5859s in my gold-guard holoflake Jazzmaster, and let me tell you, they are formidable. Loud and low-noise, superb for stage use. Paired with a Muff-style fuzz and some delay, I feel like Iām David Gilmour.
P-90
P-90 Jazzmaster pickups by The Creamery
For those about to rock, we politely suggest starting here.
If your tastes skew into the Gibson realm, youāll be happy to learn that most of your favorite winders probably already make the perfect pickup for you in the form of a P-90 in a Jazzmaster-shaped bobbin.
To name a few, Creameryās P90 Jazzmaster ($115 street), Fralinās Steel-Pole ($115 street), Lollarās P-90 for Jazzmaster ($145 street), Novakās JM-90 ($140 street), and Porterās J90 ($130 street) will fit the bill here. They all marry true P-90 bar magnet construction with a relatively Jazzmaster-like coil shape, so you get the more aggressive midrange bark of a P-90, but with some snap on top for good measure.
When using a P-90 in a Jazzmaster, do take your potentiometers into consideration. Each of these options sound great with the brightness of the stock 1M pots but can be declawed by stepping down to 500k as youād find on a proper P-90-equipped Gibson. Again, donāt be afraid to experiment!
Humbucker
Lambertoneās Crema set
Throwing humbuckers in a Jazzmaster turns it into a Jazzblaster, something I back fully. I adore my single-coils, but thereās something undeniably fun about slapping some double-coils in your trusty offset guitar.
Companies like Lambertone make this easy with the ability to grab their PAF-inspired Crema ($345/set street) model under a Jazzmaster cover, and the same goes for the Curtis Novak JM-PAF ($175 street). The McNelly Jazzmaster HB ($155 street) does a similar thing but allows you to select any of their traditional humbuckers for a drop-in fit.
Wide Range
Fenderās Cunife Wide Range Humbucker set for Jazzmasters
Although first introduced on Telecasters in 1971, and later appearing as standard on Fenderās semi-hollow Starcaster, there is perhaps no other humbucker model that feels like a perfect match for Jazzmasters than Fenderās Wide Range pickup. Paradoxically single-coil-like in response, these massive humbuckers deliver big output, complex low end, and attenuated yet crisp highs.
Accounting for this, Curtis Novak, Creamery, and Porter have for years offered drop-in wide range pickups with appropriate plastic covers, and Lollar joined in a few years back with their Regal for Jazzmaster ($225 street) set. Each of these winders have a different take on the wide range, but they all sound excellent. Seriously, thereās not a bad sound in the bunch.
āThere is perhaps no other humbucker model that feels like a perfect match for Jazzmasters than Fenderās Wide Range pickup.ā
Just this year, Fender released their own drop-in Cunife (Copper, Nickel, Iron) Wide Rangepickups ($399/set street), the companyās first proper wide ranges since the ā70s. With the correct magnet type in play, this is a return to form for the wide range with a vintage-correct sound.
Better yet, each of the makers listed in this section offer the original massive, chrome-covered versions of these pickups, so thereās nothing stopping you from dropping them in your guitarāat least, nothing aside from some routing.
Noiseless
EMGās JMaster set in black
Since weāre in the hum-canceling wheelhouse, letās talk about noise. For some, itās an unavoidable nuisance and a trade-off for having a preference for the sound and response of true single-coils. For others (myself included), itās far from the top of the list of guitar-related annoyances. In all honesty, it doesnāt bother me at all, but Iāll admit that I have my signal chain wired up for the lowest possible noise, my guitars are well-shielded, and I roll off my volume when not playing.
For the former group, there is hope! Kinman should be an already familiar name in the noiseless pickup landscape, and weāre all lucky that the company offers a whole host of Jazzmaster options that includes three types of pole-piece spacing, and four different models to meet the needs of individual players: the FatMaster ($189 street), SurfMaster ($189 street), the double-voiced SurfMasterĀ DV ($295 street), and the ThickMaster ($189 street).
Itās not so difficult to intuit the sound profiles from the names of these pickups, so Iāll refrain from describing them here. What I can say is that every experience Iāve had with these pickups has been stellar, so if youāre sensitive to hum but also whatās lost with most hum-canceling options, Kinman may be the ideal solution for you.
Other excellent noise-free pickups come from Brandonwound with their Noiseless Jazzmaster ($125 street), Novakās JM-Stealth HC ($170 street), Fralinās Hum-Canceling Jazzmaster ($159 street), and EMGās JMaster ($229/set street) sold as a pickguard assembly or in pickup sets.
I could write a standalone piece about the EMGs, but to sum up: I find them genuinely impressive in their versatility and utility, and the JMasters somehow stay true to the Jazzmaster flavor. If youāre already an EMG fan, the JMaster is totally worth your time.
Off the Beaten Path
EP Custom Pickups Vintage Correct Jazzmaster Pickups
Before we close out, letās take a detour on roads less traveled. Most of the makers Iāve already mentioned have quirkier, less āstandardā pickups in their catalog. Iām thinking Novakās Gold Foils for Jazzmaster ($155 street), Geminiās SuproCaster ($85 street), Lollarās Blademaster ($155 street), and Fenderās Cunife/Cobalt Chrome Jazzmaster pickups ($299/set street), but there are some smaller brands that I think deserve some attention.
EP Custom is a small operation based out of Santa Cruz, California, that specializes in Fender-style pickups with sounds that far exceed their modest price tag. Ever since installing their ā62 Jaguar set in my Coke Bottle Sparkle Jaguarāāa tribute to Dave Wronski of SlacktoneāāI can hardly think of a more perfect-sounding Jaguar for myself.
EPās Jazzmaster pickups are equally exceptional and come in two flavors: Vintage Correct ($170/set street) and Fat ($180/set street). The former features Formvar wire and has comparable output and tone to a proper 1958 set, woody and full-sounding with a nice amount of zing. The Fat is overwound for a proper āhotā pickup, with a growl perfectly suited for overdrive.
The Creamery: The majority of winders named in this article are based in the United States. With acknowledgement to the connected world we all live in, I wanted to give a proper shout to The Creamery (see the āwide rangeā heading above) based out of Manchester, U.K.
For as long as Iāve been in the offset-guitar space, The Creamery has been one of my most consistent recommendations for folks outside the U.S. who are looking for something different, something unique, something that feels specially made for them. Creamery offers everything from classic Jazzmaster pickups, wide range, and PAF-style pickups, but also an extensive list of custom options. Pole spacing, magnet type, wireāāyou name it.
Whether youāre within or without the U.K., keep The Creamery in mind if your tastes take you off the beaten path.
Black Mass: You may already be familiar with Black Mass Electronics thanks to the game-changing 1312 Distortion, a RAT-style pedal that boasts a huge range of sounds thanks to its 8-way clipping diode selection dial. What you may not be aware of is that Black Mass has entered the pickup winding world with the JMXL ($190/set street).
While it appears to be a traditional Jazzmaster pickup on the outside, it boasts 1/4" alnico 5 rod magnets and a double-tall coil with the bridge wound to around 11k. This is a heavy, punishing set thatāll put you in the mood for doom.Winding Up
With an article like this, itās impossible to feature every winder out there, each of them putting their own spin on dozens of classic designs. Iāve attempted to narrow down the list by sticking to pickups I have real-world experience with, so if something you love isnāt on this list, that doesnāt mean itās not great. Drop a line to call out your favorites so that we can all benefit from your experience, too!
- Lollar Pickups Releases the DC-90 āŗ
- Lollar Pickups El Rayo Humbuckers Review āŗ
- Builder Profile: Seymour Duncan's Maricela "MJ" Juarez āŗ
100 watts of clean-to-dirty power in a slim, light, 2-channel, tour-ready design that's as easy on the billfold as your back.
The 2-channel, Tour Baby guitar amp is incredibly versatile in a variety of playing situations. The onboard studio grade VCA compressor of Tour Babyās refined clean channel, offers pristine clean tones with active or passive pickups. It provides a consistent dynamic range and low noise in extreme settings without the need for separate pedals. It includes precise bass and treble EQ controls.
The naturally voiced dirty channel of this tone machine allows players to easily get that sought after āpoint of breakupā sound . A custom voiced presence control and powerful 3-band EQ control means the Tour Babyās tone can be shaped to cut-through the mix. Add to that a footswitchable volume control, that provides a stage-friendly volume boost option for live applications.
Leveraging 3D printing technology, the new Floyd Rose Original locking nuts are designed to deliver unmatched precision and consistency, replacing the traditional ālost waxā casting method that dominated for decades.
The shift to 3D printing allows for intricate detailing and tighter tolerances, ensuring each nut meets exact specifications.
The process begins with powdered metal, which is precisely 3D printed into the desired shape using advanced metal printing technology. After printing, the parts are depowdered and cleaned before undergoing a sintering processāan advanced heat treatmentāduring which the parts achieve full density and hardness. Lastly, the nuts are CNC ākiss-cutā to exacting specifications for consistency and control of the fit before receiving a premium electroplating finish.
āFloyd Rose has always been synonymous with innovation, and by embracing this incredible new technology we are able to continue that legacy,ā said Andrew Papiccio, president of AP International Music Supply of which Floyd Rose is a division. āThe accuracy and flexibility of the new 3D printing method will allow us to make a more consistent piece while also giving us full control of the manufacturing right here in the USA.ā
Initially, the 3D-printed locking nuts will be available in ten classic sizes with a 10ā radius, with plans to expand the range to accommodate various fretboard radii in Spring 2025. This augmentation will offer players more options for customizing their setups to match a wide variety of fretboard curvatures.
To get a sneak peek at the new Floyd Rose USA Series, come visit us at NAMM in booth 5734 in Hall D.
With flexible voltage adjustments, precise control, customizable protection, compact design, and affordable pricing at $299, the Brownie is the ultimate solution for optimizing tone and safeguarding your gear.
AmpRx, the trusted name behind the industry-renowned BrownBox, has unveiled its newest innovation: The Brownie, a voltage-optimizing power supply for modern amps and the first of its kind.
Designed by AmpRx co-owner and CEO Cassandra Sotos (2024 NAMM Female Entrepreneur of the Year), the Brownie provides unparalleled control, flexibility, and protection specifically for modern tube amplifiers by allowing the player to both increase and decrease voltage with volt-by-volt precision.
Priced at $299, the Brownie offers an affordable and essential solution for protecting your investment in your high-quality tube amp. It allows you to optimize your tone and safeguard your gear from variations in voltage by givingthe ultimate advantage: knowing exactly what youāre feeding your amp.
Known as the secret weapon of touring professionals, AmpRx products have been spotted on stage with bands like the Red Hot Chili Peppers, Lynyrd Skynyrd, Zac Brown Band, Iron Maiden, and many more. AmpRx is now bringing its game-changing technology to an even broader audience with this compact, affordable, and versatile product. Try the Brownie for yourself and discover exactly why artists, amp designers, and technicians rely on AmpRx to provide consistent sound, performance, and extend the life of their gear.
The Brownie will be available January 20th, 2025, presented at NAMM Global Media Day and on display at Booth #5630.
WHAT MAKES THE BROWNIE SPECIAL? Building on the success of the flagship BrownBox, the Brownie offers key innovations tailored for modern amplifiers:
- Flexible Voltage Adjustments: The Brownie is the first in the AmpRx line to both decrease and increase voltage, providing optimal performance for modern tube amps (often at 117-120V).
- Precise Control: Adjust voltage in ultra-precise -1V increments when decreasing, and by +3V or +5Vwhen increasing, allowing musicians to fine-tune their tone with precision.
- Customizable Protection: The Brownie ensures safe operation, putting control directly in the player's hands, and includes two fuse options: 2A for smaller setups and 4A for larger setups, ensuring compatibility with diverse gear.
- Compact and Portable Design: Smaller and lighter than the original BrownBox, the Brownie is perfect for musicians seeking portability, durability, and streamlined functionality. It can even fit on a pedalboard or in a backpack.
- Wide Accessibility: At just $299, the Brownie offers professional-grade voltage control at a price point thatās accessible to musicians everywhere.
Email sales@brownbox.rocks to order and stop by NAMM Booth #5630 to see the Brownie in action, talk with the owners, team and artists, and see exactly why so many people insist onAmpRx products when they make music.
For more information, please visit brownbox.rocks.
When every guitar claims to be special, how can any guitar truly stand out?
In the guitar world, a transformation is underway that reminds me of the rise and fall of empires. The modern boutique guitar market, which once felt to me like an underground treasure trove, now seems poised on the precipice. It has grown, matured, and, in my opinion, overextended itself. Are we cresting the wave? Has the boutique boom run its course, or is it simply shedding its skin in metamorphosis?
Guitar building has been around for centuries, mostly as an individual, artisanal endeavor until the late 19th century, when it began to be dominated by manufacturing entities. The boutique guitar category as we know it today began as a reaction to the hegemony of big brands. It was a calling and philosophyāa return to individual builders and small shop manufacturers in the mainstream consciousness. Builders crafted instruments that evoked the patinated romance of vintage instruments as well as the hot-rod aesthetic. What started with a handful of outliers has now become an ecosystem. But, like all trends, thereās a limit to how far it can stretch before it must adapt or collapse.
Pioneers to Proliferation
In the early 1970s, builders like Rick Turner, John Suhr, Michael Gurian, and Bernie Rico, among others, stook as renegades of the modern boutique scene. They were voices bucking the production-line trend with craftsmanship that evoked past masters like DāAngelico, Bigsby, or even Stradivarius. These builders werenāt just producing instruments; they were making statements. A guitar by Parker or a Manzer wasnāt just a tool, it was a declaration of the builderās ethos and visionāsomething that might have been lost in the guitar boom of the ā60s.
Today, the boutique world is a crowded stage where hundreds, if not thousands, of builders compete for the attention of an audience with only so much disposable income. Plus, the custom allure is no longer the sole province of artisans; custom shop offerings from major brands like Fender, Gibson, and PRS have blurred the lines. CNC machining and production streamlining have made āboutiqueā features practical, even necessary, for larger operations. To their credit, unlike at the birth of the vintage market, the big guys saw the wave as well. The once-clear delineation between boutique and mainstream is murkier than ever, which by its nature dilutes everyoneās impact in the segment.
In economic terms, this is a textbook example of market saturation. There are only so many players willing and able to spend $5,000, $10,000, or more on a guitar. Supply has exploded, but demand may be plateauing. Handmade boutique guitars, once a rarefied niche, are now ubiquitous at trade shows, online marketplaces, and across social media feeds. This leads me to a pressing question: When every guitar claims to be special, how can any guitar truly stand out?
The Instagram Paradox
Online, custom guitars have become as much about image as they are about sound. It seems any builder with a board and a butter knife is trolling for your approval. A scroll through Instagram reveals a sea of small-batch instruments, but thereās a creeping sense of dĆ©jĆ vu. How many āoffsetā guitars with stained burl tops and pre-distressed finishes can one truly appreciate before they begin to blur together? Social media, once a powerful tool for builders to connect with their clientele, has become a double-edged sword. On the one hand, itās never been easier to showcase work to a global audience. On the other, the sheer volume of content has weakened the impact.
āA guitar by Parker or a Manzer wasnāt just a tool, it was a declaration of the builderās ethos and visionāsomething that might have been lost in the guitar boom of the ā60s.ā
The Buyerās Shift
Meanwhile, players too are evolving. With the pandemic-fueled spike in sales fading, some tastes are turning away from the museum-worthy builds in favor of simpler, more traditional guitars. In a way, the legacy brands may now be a salve for the disaffected. In an ironic twist, they are seen as the true foundation of the industryāthe original and genuine as opposed to a hip fad.
What Comes Next?
So, has the boutique guitar market peaked? Perhaps. But a peak doesnāt necessarily signal decline. Just as the boutique segment was born from a reaction to mass production, the next wave may be driven by a return to fundamentals. Builders who adapt to a changing landscape or who have built their own legacy will continue to thrive. Those who have not entered the general consciousness may find themselves left behind.
In the end, the boutique guitar market will endure, not because of its size, but because of its soul. Just as guitar building began as an individual endeavor, that heritage will continue. The challenge is to capture the essence of what makes a guitar special in the first place: the connection between builder and playerāand the magic of turning wood and wire into music.