Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Look Out, King Tubby! Aisha Loe’s Favorite Pedal Build

Look Out, King Tubby! Aisha Loe’s Favorite Pedal Build

State of the stump: Our columnist built this dub-inspired oscillator inside the shell of an old walkie-talkie bearing Radio Shack's Realistic brand name.

How a walkie-talkie, a tiny city of circuits, and Shrinky Dinks became a mind-blowing dub box.

My phone has become a repository of gut shots and glamour shots of my pedal builds. Once a year or so, when it gets full, I dump the photos onto a hard drive for safe keeping. Every time I do, it turns into an all-day trip down memory lane. I go back—all the way back—to when I first started building pedals, and I look at my progression from then until now. I find it so rewarding to have a visual journal of all the work, love, and intention that I put into them. It's a representation of my learning journey and a reminder of how many friends I have made along the way.


Recently, as I was scrolling through, I found photos of what remains my favorite build to this day. I want to share my experience building it. As some of you know, I love to make guitar pedals out of broken, old electronic equipment. It's honestly my passion. In particular, I enjoy gutting busted walkie-talkies and building fun things inside. The old steel cases just look so cool! This particular Realistic Rover-1500 walkie-talkie became a dub-siren-turned-guitar-pedal. I named it the Loe-Fi Dub Siren. You can hear it on Instagram.

A dub siren is a type of synthesizer used predominantly in dub reggae. It is usually a relatively simple oscillator, housed in a box, often allowing for a variety of waveforms to be altered by turning potentiometers controlling pitch, rate, and other parameters. Dub sirens are frequently activated by a button and sometimes have the functionality to toggle between continuous synthesis with one button press or sound-emission-only when the button is held.

I just love it when there is an uninterrupted, smooth flow to a rather complicated build.

I built this oscillator circuit and added a small delay circuit to it as well. It sounded really cool and was fun to jam on during testing. I decided to take it one step further and add a sweep filter so that it could sound just like the King Tubby records I took my inspiration from. After I had it all finished, I had a thought: What if I add an input jack? Then, I could play guitar, or whatever, through it and play along with the oscillator. It took some figuring out, but eventually I got it all working. It was a pretty complicated build in the end.

I took my string-of-many-circuits that was ready to go and began the process of figuring out where everything was going to fit inside the walkie-talkie enclosure. This is probably the biggest challenge of all when building inside salvaged enclosures. They are often molded and, therefore, have a lot of odd protrusions to work around when considering where all of the circuit boards can be mounted. I also needed to figure out where the controls would go.

Next, came the drilling. Let me tell you, drilling steel is no fun! Not for me, anyway. Why did I have to put so many controls on this thing? After about an hour of careful drilling, the walkie-talkie was ready for population. I carefully followed my notes and built a little city inside. Then, I moved onto wiring. Many folks who build electronics loathe the wiring process, but I love it and enjoy the challenge of doing it neatly. Nothing gets me as excited as a gut shot with really tidy wiring.

This cool, jungle-themed badge on the side of Aisha Loe's Loe-Fi Dub Siren was painstakingly made from Shrinky Dinks. It took about 20 tries to get right.

After all the hardware and circuit boards were mounted, I tested the finished work. I made a few little last minute tweaks and deemed it ready for knobs. I ridiculously obsess over knob selection. I think it's a pretty common thing among pedal builders, actually. The knobs tie the whole thing together visually. A lot of thought goes into not only aesthetics, but also how they feel. They're going to get touched a lot, so they should feel nice!

As a finishing touch, I made a name badge for the finished pedal … out of Shrinky Dinks! (If you don't know that these are, google them. They're cool!) Yes, you read that correctly. I don't know why that idea popped into my head, but it did. So, I went with it. I learned that it takes about 20 tries to get it right! I vowed to never do that again. It does look pretty sweet, though.

I learned so much in the process of putting this pedal together. Sometimes my experiments lead me down paths that dead end. I learn a lot, whether it becomes a pedal at the end of my journey or not. This one gave me a win at every turn. Every idea and modification I had for it worked out so well. I just love it when there is an uninterrupted, smooth flow to a rather complicated build. The experience of building this dub siren is a cherished memory, and the pedal now belongs to one of my favorite musicians of all time. Dreams do come true! This build will always remind me of that.

King Tubby - Real Gone Crazy Dub (Crazy Baldhead Dub)

Listen to visionary reggae producer King Tubby work the dub siren in his composition "Real Gone Crazy Dub." The sound is addictive, freaky, and psychedelic.


On her new record with her trio, Molly Miller executes a live-feeling work of structural harmony that mirrors her busy life.

Photo by Anna Azarov

The accomplished guitarist and teacher’s new record, like her lifestyle, is taut and exciting—no more, and certainly no less, than is needed.

Molly Miller, a self-described “high-energy person,” is fully charged by the crack of dawn. When Ischeduled our interview, she opted for the very first slot available—8:30 a.m.—just before her 10 a.m. tennis match!

Read MoreShow less

The new Jimi Hendrix documentary chronicles the conceptualization and construction of the legendary musician’s recording studio in Manhattan that opened less than a month before his untimely death in 1970. Watch the trailer now.

Read MoreShow less
Rivolta Guitars' Sferata | PG Plays
Rivolta Guitars' Sferata | PG Plays

PG contributor Tom Butwin dives into the Rivolta Sferata, part of the exciting new Forma series. Designed by Dennis Fano and crafted in Korea, the Sferata stands out with its lightweight simaruba wood construction and set-neck design for incredible playability.

Read MoreShow less

The "Sandblasted" SE Series features a swamp ash top with a unique sandblasted finish in five color options.

Read MoreShow less