This 1968 Gibson signature-model hollowbody has kept its glow—and nearly all its components—through the decades.
From the sparse, smoky ballads of Julie London to the hard bop of Sonny Rollins, Barney Kessel could back up just about anybody. The bandleader, session great, Wrecking Crew member, and sideman was one of the most accomplished guitarists of his era. His chordal complexity not only got him steady work and accolades, but also a collection of signature guitar models bearing his name.
This 1968 Gibson Barney Kessel Custom is a top-of-the-line example. It’s the higher-end counterpart to the Barney Kessel Regular, both built from 1961 until 1974. They followed a trio of Barney Kessel signatures that Kay sold between 1957 and 1960.
Barney Kessels often became parts donors, with their hardware, tuners, and pickups (original PAFs, Pat. No., and T-Tops, depending on the year) being stripped and sold separately.
Each Gibson model has a hulking 17"-wide and nearly 3"-deep body, with two humbuckers, a Tune-o-matic bridge, and a bound rosewood fretboard. The attractive Barney Kessel tailpiece is also common to both, while the controls will be familiar to any Gibson player: two volume pots, two tone knobs, and a 3-way selector switch. The dual Florentine cutaways—a design first seen in these Barney Kessels and later used in Gibson’s Trini Lopez signature—cut a striking silhouette.
Of the two Gibson Kessels, the Custom alone is dressed to the nines, swapping in gold-plated hardware for the Regular’s nickel, and bowtie inlays for the Regular’s fretboard parallelograms. There’s also a 3-piece maple neck with two pinstripe-thin mahogany strips taking over for the Regular’s solid mahogany. And the Custom tops off its outfit with a pearl headstock inlay in the shape of a musical note.
Such features were a huge upgrade to the art-deco stylings and Kleenex-box pickups of Kay’s Kessel signatures, which Kessel snubbed, reportedly saying, “I don’t play that Kay. It’s a terrible guitar!” Interestingly, he often chose not to play these Gibson signatures, either, instead typically using his favorite 1940s ES-350.
When they were introduced, Gibson’s Barney Kessel Custom model had a list price of $599, while the Regular’s was $399. Both sold in respectable if not incredible numbers, with sales peaking in 1968. However, the following decades were not particularly kind to the guitars. As the vintage market took off for Les Pauls, SGs, and other classic Gibsons, Barney Kessels often became parts donors, with their hardware, tuners, and pickups (original PAFs, Pat. No., and T-Tops, depending on the year) being stripped and sold separately. You can still find Barney Kessel husks on the market—project guitars looking for a new owner to rebuild them. And many of the complete Barney Kessels you’ll find for sale have been rebuilt.
A rear view indicates this Kessel was not heavily played. There’s no belt rash, finish wear, or other marks, and the new-guitar tags typically indicate that the previous owner or owners had a collector’s sensibility.
That’s what makes the particular Barney Kessel Custom featured here so special. It’s nearly all original, with Patent pickups intact and even its Custom-stamped hang tags. The only modification is one replaced tuner (along with a couple patched screw holes from a previous replacement). The cherry in its cherry sunburst finish is one of the most vibrant we’ve ever seen, and the condition of the finish overall is in impeccable vintage shape.
This Custom model is classic Gibson, with its 4-knob control array, 3-way toggle, and Pat. No. pickups. Unique flourishes include the special Barney Kessel tailpiece and bow-tie fretboard inlays.
Because of the wide array of Barney Kessel Customs on the used market—many with non-original parts—you can find them across the price spectrum, from about $3,000 on the low-end to $12,000 or more on the high. This Custom, listed on Reverb now by Nationwide Guitars, fittingly lands on the higher end, with an asking price of $8,999.
Sources for this article include Gruhn’s Guide to Vintage Guitars by George Gruhn and Walter Carter, American Guitars: An Illustrated History by Tom Wheeler, Reverb’s “Player Profile: The Hard-Swinging Barney Kessel” by Greg Cooper, Premier Guitar’s “Gibson and Barney Kessel” by Jim Bastian, and Reverb listings from Retrofret Vintage Guitars and Vintage Correct Parts.
- 'Reunion!' Bruce Forman's Love Affair with Barney Kessel's Guitar ... ›
- A Burst From a Different Golden Era - Premier Guitar ›
- 1967 Gibson Trini Lopez Deluxe and 1968 Gibson Barney Kessel ... ›
We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
In the early ’60s, some of the British guitarists who would shape the direction of our instrument for decades to come all found themselves at a concert by Sister Rosetta Tharpe. What they heard from Tharpe and what made her performances so special—her sound, her energy—must have resonated. Back at home in the U.S., she was a captivating presence, wowing audiences going back to her early days in church through performing the first stadium rock ‘n’ roll concert—which was also one of her weddings—and beyond. Her guitar playing was incendiary, energetic, and a force to be reckoned with.
On this episode of 100 Guitarists, we’re joined by guitarist Molly Miller, who in addition to being a fantastic guitarist, educator, bandleader, and performing with Jason Mraz, is a bit of a Sister Rosetta scholar. We chat with Molly about Sister Rosetta’s “immediately impressive” playing, which blends jazz, gospel, chromaticism, and blues into an early rock ‘n’ roll style that was not only way ahead of its time but was also truly rockin’.
Featuring vintage tremolos, modern slicer effects, and stereo auto-panners, the update includes clever Rate and Tempo controls for seamless syncing and morphing.
Today Kemper announces the immediate availability PROFILER OS 12.0 including the highly anticipated collection of advanced Tremolo and Slicer FX for the entire range of KEMPER PROFILER guitar amps.
The Collection features three vintage tremolos, two modern slicer effects, and two stereo auto-panners, that have been derived from the slicer effects. They all feature a clever Rate and Tempo control system, that allows for syncing the tremolo to the song tempo, retriggering the timing by simply hitting the TAP switch, and changing or morphing the tremolo rate to different note values,
The new Advanced Tremolo Modules in Detail
- The Tube Bias Tremolo is the familiar Tremolo in the Kemper Profilers. Formally named "Tremolo“ and available in the PROFILERs since day one, it is a reproduction of the famous Fender Amp tremolos from the 50‘s. Placed in front of the amp it beautifully interacts with the amp distortion.
- The Photocell Tremolo dates back to the 60‘s and features a steeper pulse slope, and its width varies with the intensity.
- The Harmonic Tremolo also dates back to the 60‘s and was introduced by Fender. The low and high frequencies alternate with the tremolo rate.
- The Pulse Slicer is a modern slizer or stutter effect that will continuously transition from the smoothest sine wave to the sharpest square wave, using the "Edge“ parameter. The "Skew“ parameter changes the timing of the high level versus the low level, sometimes also called pulse width or duty cycle.
- The Saw Slicer creates a ramp like a saw wave. The saw wave has a falling ramp when "Edge“ is at full position, and a rising edge at zero position. Towards the middle position a rising and falling ramp are forming a triangle wave. The „Skew“ parameter changes the slope of the rising and falling ramp from a linear trajectory to a more convex or concave shape.
- The Pulse Autopanner and the Saw Autopanner are derivates from their respective Slicers, they spread their signals in the stereo panorama. The "Stereo“-control parameter is included in many effects of the PROFILER. Here, it introduces a novel "super-stereo" effect that lets the Autopanner send the signal well outside the regular stereo image. This effect works best if you are well positioned in the correct stereo triangle of your speakers. When you move the “Stereo” soft knob beyond the +/-100% setting, the super-stereo effect comes into place, reaching its maximum impact at +/-200%.
- A single press on the TAP button at the beginning of the bar will bring the rhythmic modulation effects, such as Tremolo or Slicer, back into sync with the music without changing the tempo. The sync will happen smoothly and almost unnoticeable, which is a unique feature. Of course, tapping the tempo is possible as well.
- Modulation Rate - The “Rate” control available in many modulation effects is based on a special philosophy that allows continuous control over the speed of the modulation and continuous Morphing, even when linked to the current tempo via the To Tempo option. The fine Rate resolution shines when seamlessly morphing from, e.g., 1/8 notes to 1/16 notes or triplets without a glitch and without losing the timing of the music.
PG's demo master quickly (and easily) drops in an H-S-S setup into his 1994 40th Anniversary Stratocaster that needed help. Find out what happens when gets his first taste of active pickups.
EMG SL20 Steve Lukather Signature Pre-wired Pickguard with 3 Pickups - Black Pearl
SL20 Steve Lukather Pre-wired PG - Blk PearlHow you want to sound and what makes you happy are both highly subjective. When it comes to packing and playing gear for shows, let those considerations be your guide.
I was recently corresponding with Barry Little, aPG reader from Indiana, Pennsylvania, about “the One”—that special guitar that lets us play, and even feel, better when it’s in our hands. We got talking about the gear we bring to gigs, and Barry sent me the photo that appears with this column.
“I’m mostly old school and take quite the amp rig, and usually two or three Strats or ‘super strats,’ plus some Teles,” he wrote. “Some are in different tunings.” Barry also has a rack, built with famed guitar-rig designer Bob Bradshaw’s help, that he says holds a Bad Cat preamp bearing serial number one. For his ’70s/’80s rock outfit and his country band, this covers the waterfront.
I love Barry’s rig; it looks awesome! So … why do I feel guilty about the substantial amount of gear I take to gigs where my five-piece band will be playing a concert-length set? Onstage, my setup looks fantastic—at least to me. It’s the gear I’ve always wanted. But packed inside cases and ready to load into the Honda Odyssey with a rooftop carrier that all five of us and our instruments travel in for away dates … it seems excessive. Currently, I take three guitars: my customized reissue Fender Esquire “Dollycaster,” my Zuzu one-off Green Monster, and a Supro Conquistador, plus a 1-string electric diddley bow made from a crawfish-boiling pot. They start every show in open G octave (D–G–D–G–D–G), open D, standard tuning, and A, respectively. There’s also a Sony GLXD6+ wireless, and a pedalboard with 13 effects stomps, a tuner, and two power boxes, along with a Brown Box. That board is the launchpad for the stereo signal that runs into two Carr 1x12 combos: a Vincent and a Telstar. In addition, there’s a big black bag with spare cables, fuses, capos, strings, extension cords, microphones, straps, duct tape, and just about anything else you might need. After all that, miraculously, there is also room for my bandmates–another guitarist, bass, drums, and theremin—and their gear, plus light luggage.
I admit that’s a lot, but it used to be more—at least by the pound. In the late ’90s and early 2000s, I often played through two Marshall 4x12s with a Mesa/Boogie Duel Rectifier Trem-O-Verb on one and a ’72 Marshall Super Lead atop the other. And before that, it was the Marshall with a 4x12 plus a ’66 Fender Twin Reverb. I kept a waist back-support belt in the van, but spent a decent chunk of that era living with regular back pain.
“I admit that’s a lot, but it used to be more—at least by the pound.”
Where am I going with this? Besides a desire for you to absolve me of my guilt, I feel like all of this gear is … um … necessary? It’s the recipe for the sound I want to hear, for the versatility of the material, and for me to play from my happiest place—onstage in the middle of a glorious stereo field of my own making. It’s not really about gear and it’s not about somebody else’s definition of practicality. It’s about joy. Ideally, you should be able to bring whatever gives you joy to a gig. Period.
Sure, naysayers will yap that after a guitar, a cable, and an amp, nothing else is necessary. And on a certain misguided, intolerant level, they are right. We can all play a show with just the basics, but I, for one, don’t want to—unless maybe it’s a solo gig. Neither did Jimi Hendrix. There is a universe of tones out there waiting to be discovered and explored. There are improvisational paths that only a pedalboard can suggest. (Of course, if you’re playing a small stage, traveling in too tight quarters, or claiming turf that impinges on bandmates, those considerations apply. “Be kind” is a good rule of thumb for life, including band life.)
Remember, the naysayers are not in your bones, and onlyyour bones know what you need and want. Don’t let the voices—even in your own head—nag you. (I, too, must take this advice to heart.) Bring whatever you want to bring to gigs, as long as you can get it there. Do it guiltlessly. Have fun. And listen to your bones.