This refinished and modded 1958 Gibson Les Paul Special exemplifies the plusses of buying a “player’s guitar.”
Sometimes, the easiest route to vintage tone and playability is by finding a guitar that’s had a refinish, or other mods that haven’t disturbed its musical essence. These are called “players” or “player-grade” guitars in the vintage market, versus “collectors' guitars,” which are unaltered from their original state. This month’s featured instrument, a 1958 Gibson Les Paul Special, is a players' guitar—and I’m that player.
The Les Paul Special has a deep lineage. The original Les Paul model, which came to be known as the Les Paul Standard in 1958, debuted in 1952. Two years later, as the line diversified, the Les Paul Custom arrived, as well as a student model called the Les Paul Junior. The Junior was the first slab-mahogany-body Gibson, with additional cost-saving measures evident in its single pickup, unbound fretboard, lack of binding, and plain dot neck markers. It sold for $99.50, versus the princely $225 price tag on the Standard, making the Junior the most affordable guitar in the 1954 Gibson catalog.
A year later, enter the Special. It also has a slab mahogany body, but upped the ante with two soapbar P-90 pickups, a Les Paul-style control set of two volume and two tone dials plus a 3-way toggle, a Tune-o-matic bridge and stop tailpiece (a combo Gibson debuted in 1953 on the Super 400), a wide ’50s-style fretboard, and a 1-piece mahogany neck with binding along the rosewood fretboard. The model came finished in TV yellow, and from 1955 to 1958 it featured a single cutaway. Priced at $179.50 in 1958, the Special was intended as an intermediate-level 6-string, nestled between the Junior and the original Les Paul. By 1959, the Special’s core design was changed to a double-cutaway and remained that way until a single-cutaway edition called the ’55 Les Paul Special was reissued in 1974. Today, the Les Paul Special still remains part of Gibson’s product line.
Long after someone had refinished this month’s featured guitar down to its mahogany body, I purchased it in the mid-1990s at Cambridge Music in Cambridge, Massachusetts. The other modifications are the replacement of the original Kluson tuners with Schaller’s and the swap of the original wraparound bridge with a Tune-o-matic, also done by a previous owner. And, of course, there’s a story.
I first saw this guitar on consignment inside a glass wall case. At the time, I did not have a slab-style Gibson, and it immediately spoke to me. I also did not yet own a P-90-equipped guitar, which amplified that voice. Honestly, I was afraid that if I played it, I’d fall in love and need to shell out the $1,200 asking price. Months passed, and it sat in the wall case, teasing me every time I made my frequent visits to the shop. One day, the inevitable happened: I asked to play it. I plugged into a couple Fenders and a Marshall combo and was struck by how comfortable the 12"-radius neck felt and how sweet the guitar sounded through a Fender Deluxe, and how spanky and barking it was through a Marshall with low-to-moderate gain, thanks to those P-90s. The term “bite” was coined for this guitar.
“That day, I walked away … but in the ensuing weeks I literally dreamed about this Les Paul Special.
That day, I walked away … but in the ensuing weeks I literally dreamed about this Les Paul Special. And then, a check for the first band profile I wrote for Rolling Stone, on Thalia Zedek and Chris Brokaw’s brilliantly edgy rock outfit Come, arrived. Clearing it with my wife, Laurie, I went to Cambridge Music with that check in my pocket. I explained to the shop’s co-owner, Dennis Keller, that if the consigner would agree to a price of $1,000, tax included, I would cross the street to my bank and bring back cash. Miraculously, the consigner agreed, and about a half-hour later I hit the subway with that refin Special in a black plastic “chainsaw” case with the Gibson logo on its side. I felt like a courier, escorting home a million bucks.
This ’58 Special is worth something in the neighborhood of $4,000 or a little less today. Similar single-cutaway Specials with the original finish, depending on road wear, are selling for between $13,000 and nearly $18,000. But I’m not jealous. This guitar is a flagship of great playability and classic, slab-body Gibson tone, and, due to that, this Special has paid back my initial investment with every trip it’s made to the studio and stage for nearly 30 years.
- Vintage Vault: 1956 Gibson Les Paul ›
- Gibson Releases 1961 Les Paul Tribute ›
- When Gibson Met Hagstrom ›
- Gibson Brands Announces CEO Transition - Premier Guitar ›
- Meeting Les Paul and Leo Fender - Premier Guitar ›
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibson’s EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (It’s easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didn’t look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as you’re able to find today. “Why?” you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ’56), the Longhorn 4623 (’58), and the Shorthorn 3612 (’58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses “baritone guitars,” to add to our confusion today. But these vintage “baritones” were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the “tic-tac” bass sound of Nashville records produced by Chet Atkins, or the “click-bass” tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
“When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye.”
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button “Tone Selector Switch” that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
It’s sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
It’s sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? That’s because the model’s single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul ’Bursts. So as people repaired broken ’Bursts, converted other LPs to ’Bursts, or otherwise sought to give other Gibsons a “Golden Era” sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isn’t original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesn’t have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald City’s $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Bacon’s “Danelectro’s UB-2 and the Early Days of 6-String Basses” Reverb News article, Gruhn’s Guide to Vintage Guitars, Tom Wheeler’s American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
Some of us love drum machines and synths, and others don’t, but we all love Billy.
Billy Gibbons is an undisputable guitar force whose feel, tone, and all-around vibe make him the highest level of hero. But that’s not to say he hasn’t made some odd choices in his career, like when ZZ Top re-recorded parts of their classic albums for CD release. And fans will argue which era of the band’s career is best. Some of us love drum machines and synths and others don’t, but we all love Billy.
This episode is sponsored by Magnatone
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.