Though they never reached the commercial success of some of their peers, the Faces have no doubt earned a place as one of the seminal rock ’n’ roll bands of the late ’60s and early ’70s. Combining influences as varied as instrumental funk à la the Meters, traditional folk music, and a heavy dose of rhythm and blues, the Faces brand of rock ’n’ roll can be heard in some way or another in the music of countless bands that followed. After the Faces folded in 1975, all five members went on to continue making great music, but their chemistry together was undeniable.
A huge part of their unique sound and stage presence came from the unusual instruments often employed by bassist Ronnie Lane and guitarist Ron Wood. Anthony Zemaitis was a British born cabinet-maker-turned-luthier. His guitars’ distinctive metal tops, often with elaborately engraved designs provided by Danny O’Brien, can be seen with some of the era’s most legendary guitar players, but it was his connection to the Faces that really put Zemaitis’ instruments on the map.
Engraver Danny O’Brien’s handiwork on the heel plate and control cavity covers are on display in this view of the bass’ back.
The bass pictured here was one of his earliest custom designs for Ronnie Lane. Though all of Tony’s designs are one-of-a-kind, this stands out as a bass guitar truly unlike any other we’ve ever seen. This instrument has a chambered body with a neck-through design and features a 6-screw heel plate purely for cosmetics. The hollow chambers on either side of the neck block were stuffed with cotton to eliminate feedback below a laminate-wood carved top. The distinctive “suit of cards” inlays along the 32"-scale neck would become a signature of Ronnie Lane, but this is perhaps the earliest example of that motif on one of his instruments. Both the headstock and end of the fretboard are delicately carved into a crown-like pattern, perhaps drawing inspiration from mandolins and lutes of the previous century. The controls are two tone dials with on-off switches for each, plus a master volume—with a missing knob—on the upper body. Every piece of metal, from the pickup surrounds, knobs, tailpiece—even the heel plate and control cavity cover—have been intricately engraved by O’Brien. This is as much a work of art as it is a unique instrument with an inspiring tone.
Ronnie Lane is hardly the most famous name associated with the Faces, but it could be argued that the spirit of the band was largely due to his influence. His love of folk and country music even left its mark upon early Rod Stewart solo records on which Lane and his Faces bandmates played a large part. This bass was with him for early Faces performances and could easily have been used on some of these classic recordings, including the albums First Step and Long Player.
This headstock has flourishes fit for a king—possibly of clubs.
There are numerous iconic photos of the band onstage where this bass can be seen, but its value goes well beyond pure memorabilia. Zemaitis instruments hold a special place in the evolution of guitar design, and the masterful engravings of Danny O’Brien are unmistakable. The sad loss of Ronnie Lane to multiple sclerosis in 1997 makes this instrument even more special. The wear and tear he put on the bass and the music he made with it are part of his lasting legacy.
Eventually this bass found its way to a pawn shop in the southern United States, where its second owner purchased it, unaware of its famous history. The bass was played locally from the late 1970s until about three years ago, when that owner passed away, leaving the bass to his cousin. His research over the past few years led him to realize the provenance of the instrument in his possession, and he ultimately confirmed his findings with us at Rumble Seat Music in Nashville, where this legendary instrument is now proudly offered—a perfect example of the kind of rock ’n’ roll artifact we love!
- Dating A '70s Les Paul - Premier Guitar ›
- Zemaitis Tribal Tattoo Review - Premier Guitar ›
- Zemaitis Generation 2 MFA-101 NT Review - Premier Guitar ›
MXR Rockman X100 Recreates Tom Scholz's Iconic Boston Guitar Sound | First Look
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.But just as decades of advances in listening technology make the Walkman now seem clunky and dated, modern guitar tech makes the Rockman look like old news. Multi-effects units, modelers, and portable interfaces all surpass the convenience of the Rockman in form factor as well as in sheer number of sonic options. But while there are any number of ways to dial up an ’80s-style guitar tone these days, nothing’s better than the real thing. The Rockman’s analog tones are still as legit as it gets. Though Dunlop continues to produce the Guitar Ace, Metal Ace, and Bass Ace headphone amps (for a cool $99 street), a pedal version with the functionality of the original would be the ultimate modern package for ’80s fetishists, right? Enter the MXR Rockman X100.
With Tones Like These, Who Needs Options
After the release of the original Rockman, Scholz continued to develop the product, spawning a whole line. But for its pedal resurrection, the MXR team set their sights on the Rockman X100, which used hard-clipping LED diodes for its two distorted settings. The new stompbox version recreates all four modes from the original: cln2 is the default setting, cln1 in the second position is EQ’d with a mid-boost, edge delivers moderate clipping, and dist is high-gain. All are switchable via a small LED-lit mode button, and a control input allows for external mode switching. Another button activates an analog chorus circuit using MN3007 bucket brigade chips, as in the original.
To drive home the ’80s aesthetic, MXR used sliders for volume and input gain controls. Volume determines output, while input gain is tied to compression. Higher input gain means more compression, which is tuned for slower release on the two clean modes, and a fast release on both dirty modes. The X100 works in both mono and stereo, but to change between them, you have to pop off the back to access an internal switch. Just make sure a TRS cable is used for stereo mode, or else the output will be muted while the pedal is bypassed.
The only things I noticed that are missing from the original’s simple set of features is the headphone output and the echo settings. I don’t know how many players would find value in the headphone jack, and considering that would add circuitry, it’s probably best for cost and space savings that it was excluded. As for the echo, you can argue that it’s canon, but I find it to be the least essential feature and don’t miss it, personally.
(Much) More Than a Feeling
Since I do not have an original Scholz X100 sitting on my desk, I’m using YouTube videos and records—Def Leppard’s Hysteria, Huey Lewis and the News’ Sports, and Joe Satriani’s Surfing with the Alien, for example—as my reference points. Those are high bars to clear, and the MXR gets there.
The default cln2 setting delivers instant gratification, with a full-bodied, sparkly tone, no matter what guitar I played through it. And though it provides loads of ’80s fun, it’s much more versatile than that, offering a great all-round clean tone that requires no additional processing. Though it might seem odd that cln2 is the default, switching to cln1’s thinner, more mid-focused sound makes the design decision clear. I can imagine situations where I’d need to cut through a mix and cln1 would be preferred, but I found myself sticking with the default mode for all my clean needs.
The distorted modes are differentiated mostly by how much gain they offer. Edge tones live just beyond the point of overdrive, and the input gain control adds a range of extra texture. The dist mode is full-on, pick-squeal-inducing high-gain saturation, with loads of everlasting sustain. These modes lean into the aesthetic much harder than the clean modes, making it a less versatile tool, but for ’80s rock excess, I can’t imagine a better option.
On a couple recording sessions, I plugged the X100 right into an interface and board to deliver spanky direct clean tones as well as tight, saturated distortion. In doing so, I discovered that direct recording is my preferred use for the X100. That’s not to say it doesn’t sound great through an amp—it does. But plugging into a front end of an amp yields less classic and authentic Rockman sounds, as the amplifier’s preamp colors the tone. Plugged through a few Fenders, I found that the treble needed taming, a problem I didn’t have when forgoing the amp. For live playing, I might explore plugging the X100 into the return input on an amp’s effects loop or right into a powered speaker to deliver an unadulterated Rockman sound more in line with the original.
The Verdict
MXR nailed it with the Rockman X100 pedal by focusing on the limited options of the original unit and getting them just right. For $229, you not only get a great ’80s rock tone, you get what is arguably the ’80s rock tone, with no other gear required, unless you want to add a little ’80s-vintage reverb too. As a performance tool, it’s probably best to think less like you’re using a pedal and more like you’re using the original in a different form, which is to say that plugging straight into an amp isn’t the only way to get the sound you want—and, in fact, it’s probably not even the best way. For recording, it’s a perfect tool. PG
