Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

Rig Rundown: Theo Katzman

Rig Rundown: Theo Katzman

How the Vulfpeck picker travels the funk fantastic—with a compact pedalboard, a two-amp setup, and some classic-style axes.

Theo Katzman plays with a fluency and fire that makes this guitarist, producer, singer, and songwriter an MVP of modern, funk-fueled rock and pop. At a recent gig at Nashville’s Brooklyn Bowl outpost, Katzman—who’s also a member of the formidable Vulfpeck collective—invited PG’s Rig Rundown team to soundcheck, to see the gear that makes his tone sing. And Katzman’s tech, Nick “Turk” Nagurka, provided assistance.

Brought to you by D’Addario XS Strings.

Stripped Strat

Theo Katzman’s No. 1 is a Fender 1962 reissue that he’s had since he was 16. He stripped the Strat’s finish down to the bare wood, and then added an Ilitch Back Plate Hum Canceling system, which takes the noise out of the stock single-coil pickups. The Strat stays strung with D’Addario NYXL .010 sets. When Katzman plays with a pick, he uses Strum-N-Comfort SNC-ST/EXH/6 Sharktooth 1.5 mm Heavy Pearl Celluloids.

Hole-y Moley!

Katzman’s Tele is an $800 parts guitar with TV Jones pickups that he purchased on Reverb. It lives in open Eb and also has D’Addario NYXL .010s.

Black Hat Strat

This Japan-built ’62 reissue Strat has an oddball headstock, with what looks like black epoxy or resin covering most of what’s at the top of its Mike Cornwall neck. It’s tuned in open D and is used primarily for slide. The stings? Yep, D’Addario NYXL .010s.

Princeton Grad

Katzman uses two amps, sending a dry signal to his Benson Nathan Junior and a wet signal to his 1968 Fender Princeton Reverb loaded with a Celestion Greenback 12. Both amps face 90 degrees offstage, to prevent hitting the front row with a laser beam of awesome. The Princeton gets a Beyerdynamic M88, which complements the punchy midrange of the amp with a healthy proximity effect and rounds the top end out a bit.

Benson, Benson, Benson

The Benson has a bit more grind and a more controlled tone. He uses a Sennheiser 906 for a dry, clear sound with minimal proximity effect. Both amps feed into the in-ear-monitor mix, hard panned left and right. Since there’s some degree of modulation from the pedalboard, that helps Katzman enjoy a sense of space in his sound. The front-of-house mix typically uses the Benson, too, since it has a more refined sound.

Theo Katzman's Pedalboard

With a team of experts on hand, we look at six workhorse vintage amps you can still find for around $1,000 or less.

If you survey the gear that shows up on stages and studios for long enough, you’ll spot some patterns in the kinds of guitar amplification players are using. There’s the rotating cast of backline badasses that do the bulk of the work cranking it out every day and night—we’re all looking at you, ’65 Deluxe Reverb reissue.

Read MoreShow less

Amazon Prime Day is here (July 16-17). Whether you're a veteran player or just picking up your first guitar, these are some bargains you don't want to miss. Check out more deals here!

Read MoreShow less

A technicolor swirl of distortion, drive, boost, and ferocious fuzz.

Summons a wealth of engaging, and often unique, boost, drive, distortion, and fuzz tones that deviate from common templates. Interactive controls.

Finding just-right tones, while rewarding, might demand patience from less assured and experienced drive-pedal users. Tone control could be more nuanced.


Danelectro Nichols 1966


The Danelectro Nichols 1966, in spite of its simplicity, feels and sounds like a stompbox people will use in about a million different ways. Its creator, Steve Ridinger, who built the first version as an industrious Angeleno teen in 1966, modestly calls the China-made Nichols 1966 a cross between a fuzz and a distortion. And, at many settings, it is most certainly that.

Read MoreShow less

The author standing next to a Richardson gunstock lathe purchased from Gibson’s Kalamazoo factory. It was used to make six necks at a time at Gibson in the 1950s and 1960s.

Keep your head down and put in the work if you want to succeed in the gear-building business.

The accelerated commodification of musical instruments during the late 20th century conjures up visions of massive factories churning out violins, pianos, and, of course, fretted instruments. Even the venerable builders of the so-called “golden age” were not exactly the boutique luthier shops of our imagination.

Read MoreShow less