
With his idiosyncratic style and spare Tele-driven setup, the inventive guitarist twists roots music on his new groove-centric album, Get It!
Rick Holmstrom says he spends “a lot of time not listening to guitar. I like trying to imagine the guitar taking the place of saxophone, Ahmad Jamal’s piano, or Mose Allison’s piano. Like Billie Holiday, who does those weird little micro bends that the great singers do—how can you get a feeling like that on the guitar?”
For Holmstrom, the answer is a style that blurs the lines between traditional blues—the genre where he’s invested most of his nearly 40-year career—and a place on the edge of the envelope, where chromatic lines, finger-crafted imitations of slide, microtonal bends, and a devout belief in the unerring power of the groove telegraph his vision. Those elements plus his clean and spanky and typically Tele-driven tone have made him Mavis Staples’ music director since 2007 and caught the ear of Ry Cooder. His ability to conjure the spirit of Mavis’ late dad, Pops Staples, on her renditions of Staple Singers classics is uncanny, yet still retains Holmstrom’s distinctive flavor.
While his resume most certainly slants toward the old-school—he’s toured with harmonica aces William Clarke, Johnny Dyer, and Rod Piazza, and recorded with Jimmy Rogers, Billy Boy Arnold, and Booker T. Jones—he’s also added spectral playing to the R.L. Burnside space-straddling classic Wish I Was in Heaven Sitting Down and recorded a solo album in 2002, Hydraulic Groove, that seamlessly wedded funk, trip-hop, ambient electronics, and roots music. In a less conservative place than the blues market, it would’ve been widely heralded as the masterpiece cognoscenti know it to be.
Bubbles - Rick Holmstrom
Now, he’s got a new instrumental album called Get It! that’s a funky and emotive showcase for his style; chasing down his passion for the almighty groove but doing so along his distinctive path where bends get weird (“Weeping Tana”), melodies swing hard (“Robyn’s Romp”), the great spirits of the genre are summoned (“King Freddie”), the strains of Morocco echo (“Taghazout”), and hip-hop-sample-worthy rhythm tracks (“Kronky Tonk”) do some heavy lifting.
Holmstrom’s journey started as a kid in Fairbanks, Alaska. His father, a local DJ, exposed Holmstrom to the blues, soul, and R&B that would define his career. No doubt the Staple Singers’ hits like “I’ll Take You There” and “Freedom Highway,” both part of Mavis’ live sets today, were on heavy rotation.
“Let’s get past all this existential, post-apocalyptic doom and have a funky good time.”
Cooder played a role in his arrival as Mavis’ musical right hand. “My band opened up for Mavis on the Santa Monica Pier,” he relates. “We get off the stage, and the promotor says, ‘Her band is stuck at LAX, but Mavis is here. Can you back her for a few songs?’ We didn’t really know her songs, but we played three or four.
“As I was walking off the stage, a guy with yellow glasses tapped me on the shoulder, and it was Ry Cooder. Ry was producing a record of Mavis’, and he liked the way we played with her. He kept telling Mavis, I guess during the session, ‘I really dug that band that played with you.’ Then our first gig with her, unbelievably, was The Tonight Show. [Laughs.]”
“The album is all my ’53 Tele except for two songs,” Holmstrom says. “It’s the variety of sounds you can get out of them. ‘All About My Girl’—that’s the neck pickup. It sounds like it could be a hollowbody. The middle is pure Stax or Motown, and then the bridge is whatever you want.”
Photo by Brad Elligood
Holmstrom’s individuality is even more surprising considering he cut his teeth during the 1980s blues explosion. While he was digging on Chicago, New Orleans, Stax, and Motown, everyone else was fixated on a particular player out of Austin, Texas. “I didn’t want anything to do with Stevie Ray Vaughan,” he says. “And that’s no diss at all. He’s a really great guitar player. But when he came out, I was like 12 years old. Playing was still an option for me. Then he came along, and it was almost enough to give up guitar.
“All you had to do was look around and see all these guys that were copying him. Everybody had a Strat, a hat, some boots, and a Super Reverb,” he explains. “So, I got a big hollowbody with a single P-90 and no cutaway and tried to learn saxophone and big band horn-section melodies.”
In forging his own way, Holmstrom sidestepped the blues-shred of those years. Preferring to let his parts breathe, he fills that space with … nothing. Check out his solo on “Looky Here” from Get It! The guy sometimes drops out for a full measure. He even ends the solo by basically not playing at all for the last two bars. Not surprisingly, it wasn’t a guitarist who inspired this restraint.
Looky Here
When Rick Holmstrom was writing his new album, Get It!, the songs started with him developing melodies by singing them, then transposing them to guitar.
“Years ago, we were playing in Boston with Mavis,” Holmstrom recalls. “We got there a night early, and Ahmad Jamal was playing. He would break down a melody and only use two of the notes. It draws you in because you’re not hearing all the notes that could be there. Your brain is allowed to imagine the rest. That was a life-changing gig for me.”
Like his playing, Holmstrom’s songwriting is also decidedly non-guitar-centric. Instead of plugging in, turning up, and going for it, he says he listens. “When I’m making up songs or getting a groove going, I’ll hum or sing to myself,” he says. “Then I'll think, ‘Where does this melody go next?’ I’m not playing the guitar at that point. I’m humming it and singing it to myself. ‘Does that flow? Okay, now let’s go back and learn that on guitar.’”
Of course, the contemporary zeitgeist—not just a quest for melody—also played a role on the creation of Get It!Rick Holmstrom’s Gear
Holmstrom primarily picks with his fingers but will revert to a pick for some solos to achieve a sharper attack and a more gain-colored tone.
Photo by Joseph A. Rosen
Guitars
- 1953 Fender Telecaster with Ron Ellis neck pickup and ’50s Fender lap-steel bridge pickup
- 1955 Les Paul Special with phase switching
- 1940s Gibson ES-150
Effects
- SIB Electronics Echodrive
- ’60s Fender Reverb Tank
- Milkman The Amp (used as a preamp for the rented AC15 when touring)
Amps
- 1950s Valco-made 1x10 Bronson combo modded to tweed Tremolux specs (with 6V6 tubes)
- Fender silver-panel Vibrolux (with 6V6 tubes)
- Vox AC15 (rented backline when touring, with EL84 tubes)
Strings
- Dunlop (.011–.050)
“It was January ’21 and my previous record, See That Light, hadn’t even come out. Then the insurrection happened, and it started to drive me nuts,” he says. “I’m watching MSNBC and reading The Times and stuff, and it was really bugging me. The only thing I could figure to do was get creative and get my mind off it. I booked a session and started making drum loops of grooves that I thought might work.”
While the world’s events have led some artists to exercise their struggles via dark, introspective works, Holmstrom went the other way. Get It! is all about having a good time, feeling free, and reminding us of a simpler, joyful way of looking at the world. “I wanted this record to be something you might put on when you get your friends together or when you’re having a barbecue,” he says. “Let’s get past all this existential, post-apocalyptic doom and have a funky good time.”
“I’ve gotten to the point where I hate guitar pedals.”
While the album is crammed with great blues, songs like “Surfer Chuck” and “Taghazout” play with ’60s surf rock, sultry Middle Eastern motifs, and whatever else caught Holmstrom’s fancy. “FunkE3,“ in particular, with its percolating Meters-style groove and stylistic shifts, shows how far Holmstrom and crew can go.
That one had been hanging around a while. “We did a tour years ago with Mavis, where Joan Osborne opened, and we also backed Joan,” Holmstrom relates. “One of our background vocalists said, ‘Man, why don’t you walk her off with an instrumental, and then, boom, go right into the Mavis set?’ So ‘FunkE3’ is the song I started working on and ended it up being that [transitional] song a lot of nights.”
Even with a wide breadth of styles on Get It!, the album’ssound and production are the secret behind its gleefully old-school character. Inspired by classic ’50s and ’60s blues albums, the musicians tracked together, in the moment, without overthinking. “I was always trying to make things sound like Chess Records in the ’50s—like that Little Walter, Muddy Waters kind of thing,” Holmstrom says. “You can tell it’s three instruments really close to each other, with some bleed.” The other two musicians in the room were Steve Mugalian on drums and Gregory Boaz on bass.
Rick Holmstrom’s band on Get It! are also his touring partners: drummer Steve Mugalian and bassist Gregory Boaz.
Photo by Brad Elligood
Holmstrom’s commitment to tradition also permeates his guitar sound. From beginning to end, he smothers the album with vintage-style amp tones from a small combo with a split pedigree. “I used a very tiny guitar amp called a Bronson. It’s a weird Valco-made amp from the ’50s. I had a buddy of mine turn it into, like, a mid-’50s tweed Tremolux. It’s a great-sounding, magical little amp.”
Despite the wide range of gain used throughout the new album, the Bronson’s onboard tremolo, a tube-driven SIB Electronics Echodrive delay, and a 1960s Fender Reverb Tank are all the effects Holmstrom used. Even that may have bordered on too much for him.
“I’ve gotten to the point where I hate guitar pedals,” he says. “I absolutely hate them. Ideally, I would love to plug straight into an amp. No 9-volt power, no wall warts, no skinny little power cables that are going to break right before the gig. I would rather use my hands.”
“I was always trying to make things sound like Chess Records in the ’50s—like that Little Walter, Muddy Waters kind of thing.”
So how does he get all his sounds? Like everything else, the old-school way. “I turn the volume of my guitar down and pick a lot with my fingers. Then, if I turn the volume on the guitar all the way up and pick with a pick, it’s pretty gain-y.”
Not surprisingly, Holmstrom also prefers vintage guitars. Save for a couple of tunes, the entire album was recorded with only one of them. “The album is all my ’53 Tele except for two songs,” he says. “It’s the variety of sounds you can get out of them. ‘All About My Girl’—that’s the neck pickup. It sounds like it could be a hollowbody. The middle is pure Stax or Motown, and then the bridge is whatever you want.”
As versatile as the Fender Tele is, the songs “King Freddie” and “Pour One Out” begged for something different. And though that something else—a 1955 Gibson Les Paul Special—is also a drool-worthy vintage piece, this one was different. “It has an out-of-phase, push-pull tone knob on the bridge pickup,” Holmstrom says. “I can blend the amount of out-of-phase so that it’s not completely nasally thin. It’s what Peter Green did, I’m sure, with his Les Paul. All points lead back to the blues, really.”
Erlee Time - Rick Holmstrom
In this live performance video of “Erlee Time,” from Get It!, Rick Holmstrom demonstrates his playful bends, joyful sense of melody, and the vintage Tele tone that’s part of his signature.
- Forgotten Heroes: Ted Greene - Premier Guitar ›
- How to Rethink the Blues Scale - Premier Guitar ›
- Forgotten Heroes: Pops Staples - Premier Guitar ›
This legendary vintage rack unit will inspire you to think about effects with a new perspective.
When guitarists think of effects, we usually jump straight to stompboxes—they’re part of the culture! And besides, footswitches have real benefits when your hands are otherwise occupied. But real-time toggling isn’t always important. In the recording studio, where we’re often crafting sounds for each section of a song individually, there’s little reason to avoid rack gear and its possibilities. Enter the iconic Eventide H3000 (and its massive creative potential).
When it debuted in 1987, the H3000 was marketed as an “intelligent pitch-changer” that could generate stereo harmonies in a user-specified key. This was heady stuff in the ’80s! But while diatonic harmonizing grabbed the headlines, subtler uses of this pitch-shifter cemented its legacy. Patch 231 MICROPITCHSHIFT, for example, is a big reason the H3000 persists in racks everywhere. It’s essentially a pair of very short, single-repeat delays: The left side is pitched slightly up while the right side is pitched slightly down (default is ±9 cents). The resulting tripling/thickening effect has long been a mix-engineer staple for pop vocals, and it’s also my first call when I want a stereo chorus for guitar.
The second-gen H3000S, introduced the following year, cemented the device’s guitar bona fides. Early-adopter Steve Vai was such a proponent of the first edition that Eventide asked him to contribute 48 signature sounds for the new model (patches 700-747). Still-later revisions like the H3000B and H3000D/SE added even more functionality, but these days it’s not too important which model you have. Comprehensive EPROM chips containing every patch from all generations of H3000 (plus the later H3500) are readily available for a modest cost, and are a fairly straightforward install.
In addition to pitch-shifting, there are excellent modulation effects and reverbs (like patch 211 CANYON), plus presets inspired by other classic Eventide boxes, like the patch 513 INSTANT PHASER. A comprehensive accounting of the H3000’s capabilities would be tedious, but suffice to say that even the stock presets get deliciously far afield. There are pitch-shifting reverbs that sound like fever-dream ancestors of Strymon’s “shimmer” effect. There are backwards-guitar simulators, multiple extraterrestrial voices, peculiar foreshadows of the EarthQuaker Devices Arpanoid and Rainbow Machine (check out patch 208 BIZARRMONIZER), and even button-triggered Foley effects that require no input signal (including a siren, helicopter, tank, submarine, ocean waves, thunder, and wind). If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute. (Spin the big wheel and find out what you’ve won!)
“If you’re ever without your deck of Oblique Strategies cards, the H3000’s singular knob makes a pretty good substitute.”
But there’s another, more pedestrian reason I tend to reach for the H3000 and its rackmount relatives in the studio: I like to do certain types of processing after the mic. It’s easy to overlook, but guitar speakers are signal processors in their own right. They roll off high and low end, they distort when pushed, and the cabinets in which they’re mounted introduce resonances. While this type of de facto processing often flatters the guitar itself, it isn’t always advantageous for effects.
Effects loops allow time-based effects to be placed after preamp distortion, but I like to go one further. By miking the amp first and then sending signal to effects in parallel, I can get full bandwidth from the airy reverbs and radical pitched-up effects the H3000 can offer—and I can get it in stereo, printed to its own track, allowing the wet/dry balance to be revisited later, if needed. If a sound needs to be reproduced live, that’s a problem for later. (Something evocative enough can usually be extracted from a pedal-form descendant like the Eventide H90.)
Like most vintage gear, the H3000 has some endearing quirks. Even as it knowingly preserves glitches from earlier Eventide harmonizers (patch 217 DUAL H910s), it betrays its age with a few idiosyncrasies of its own. Extreme pitch-shifting exhibits a lot of aliasing (think: bit-crusher sounds), and the analog Murata filter modules impart a hint of warmth that many plug-in versions don’t quite capture. (They also have a habit of leaking black goo all over the motherboard!) It’s all part of the charm of the unit, beloved by its adherents. (Well, maybe not the leaking goo!)
In 2025, many guitarists won’t be eager to care for what is essentially an expensive, cranky, decades-old computer. Even the excitement of occasional tantalum capacitor explosions is unlikely to win them over! Fortunately, some great software emulations exist—Eventide’s own plugin even models the behavior of the Murata filters. But hardware offers the full hands-on experience, so next time you spot an old H3000 in a rack somewhere—and you’ve got the time—fire it up, wait for the distinctive “click” of its relays, spin the knob, and start digging.
6V6 and EL84 power sections deliver a one-two punch in a super-versatile, top-quality, low-wattage combo.
Extremely dynamic. Sounds fantastic in both EL84 and 6V6 settings. Excellent build quality.
Heavy for a 9-to-15-watt combo. Expensive.
$3,549
Divided by 13 CCC 9/15
The announcement in January 2024 that Two-Rock had acquired Divided by 13 Amplifiers (D13) was big news in the amp world. It was also good news for anyone who’d enjoyed rocking D13’s original, hand-made creations and hoped to see the brand live on. From the start of D13’s operations in the early ’90s, founder and main-man Fred Taccone did things a little differently. He eschewed existing designs, made his amps simple and tone-centric, and kept the company itself simple and small. And if that approach didn’t necessarily make him rich, it did earn him a stellar reputation for top-flight tube amps and boatloads of star endorsements.
D13’s history is not unlike Two-Rock’s. But the two companies are known for very different sounding amplifiers and very different designs. As it happens, the contrast makes the current Two-Rock company—itself purchased by long-time team members Eli Lester and Mac Skinner in 2016—a complementary new home for D13. The revived CCC 9/15 model, tested here, is from the smaller end of the reanimated range. Although, as we’ll discover, there’s little that’s truly “small” about any amp wearing the D13 badge—at least sound-wise.
Double Duty
Based on Taccone’s acclaimed dual-output-stage design, the CCC 9/15 delivers around 9 watts from a pair of 6V6GT tubes in class A mode, or 15 watts from a pair of EL84s in class AB1 mode (both configurations are cathode-biased). It’s all housed in a stylishly appointed cabinet covered in two-tone burgundy and ivory—together in perfect harmony—with the traditional D13 “widow’s peak” on a top-front panel framing an illuminated “÷13” logo plate. Measuring 22" x 211/4" x 10.5" and weighing 48 pounds, it’s chunky for a 1x12 combo of relatively diminutive wattage. But as Taccone would say, “There’s no big tone from small cabs,” and the bigging-up continues right through the rest of the design.
With a preamp stage that’s kin to the D13 CJ11, the front end of the CCC 9/15 is a little like a modified tweed Fender design. Driven by two 12AX7 twin triodes, it’s not a mile from the hallowed 5E3 Fender Deluxe, but with an EQ stage expanded to independent bass and treble knobs. Apart from those, there are volume and master volume controls with a push-pull gain/mid boost function on the former. In addition to the power and standby switches, there’s a third toggle to select between EL84 and 6V6 output, with high and low inputs at the other end of the panel. Along with two fuse sockets and an IEC power-cord receptacle, the panel on the underside of the chassis is home to four speaker-output jacks—one each for 4 ohms and 16 ohms and two for 8 ohms—plus a switch for the internal fan, acknowledging that all those output tubes can get a little toasty after a while.
“Set to 6V6 mode, the CCC 9/15 exudes ’50s-era tweed warmth and richness, with juicy compression that feels delightful under the fingertips.”
The combo cabinet is ruggedly built from Baltic birch ply and houses a Celestion G12H Creamback speaker. Construction inside is just as top notch, employing high-quality components hand-soldered into position and custom-made transformers designed to alternately handle the needs of two different sets of output tubes. In a conversation I had with Taccone several years ago discussing the original design, he noted that by supplying both sets of tubes with identical B+ levels of around 300 volts DC (courtesy of a 5AR4/GZ34 tube rectifier), the EL84s ran right in their wheelhouse—producing around 15 watts, and probably more, in cathode-biased class AB1. The 6V6s operate less efficiently, however, and can be biased hot to true class A levels, yielding just 9 to 11 watts.
Transatlantic Tone Service
Tested with a Gibson ES-355 and a Fender Telecaster, the CCC 9/15 delivers many surprises in spite of its simple controls and is toothsome and dynamic throughout its range. Between the four knobs, push-pull boost function, and 6V6/EL84 switch, the CCC 9/15 range of clean-to-grind settings is impressive regardless of volume, short of truly bedroom levels, perhaps. It also has impressive headroom and a big, robust voice for a combo that maxes out at 15 watts. Leaving the boost switch off affords the most undistorted range from the amp in either output-tube mode, though the front end will still start to push things into sweet edge-of-breakup with the volume up around 1 or 2 o’clock. Pull up that knob and kick in the boost, though, and things get thick and gutsy pretty quick.
While the power disparity between the 6V6 and EL84 settings is noticeable in the amp’s perceived output, which enhances its usefulness in different performance settings, you can also think of the function as an “era and origins” switch. Set to 6V6 mode, the CCC 9/15 exudes ’50s-era tweed warmth and richness, with juicy compression that feels delightful under the fingertips. The EL84 setting, on the other hand, ushers in ’60s-influenced voices with familiar British chime, sparkle, and a little more punch and cutting power, too.
The Verdict
If the CCC 9/15 were split into different 6V6 and EL84 amps, I’d hate to have to choose between them. Both of the amp’s tube modes offer expressive dynamics and tasty tones that make it adaptable to all kinds of venues and recording situations. From the pure, multi-dimensional tone to the surprisingly versatile and simple control set to the top-flight build quality, the CCC 9/15 is a pro-grade combo that touch-conscious players will love. It’s heavy for an amp in its power range, and certainly expensive, but the sounds and craft involved will make the cost worth it for a lot of players interested in consolidating amp collections.
The luthier’s stash.
There is more to a guitar than just the details.
A guitar is not simply a collection of wood, wire, and metal—it is an act of faith. Faith that a slab of lumber can be coaxed to sing, and that magnets and copper wire can capture something as expansive as human emotion. While it’s comforting to think that tone can be calculated like a tax return, the truth is far messier. A guitar is a living argument between its components—an uneasy alliance of materials and craftsmanship. When it works, it’s glorious.
The Uncooperative Nature of Wood
For me it all starts with the wood. Not just the species, but the piece. Despite what spec sheets and tonewood debates would have you believe, no two boards are the same. One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.
Builders know this, which is why you’ll occasionally catch one tapping on a rough blank, head cocked like a bird listening. They’re not crazy. They’re hunting for a lively, responsive quality that makes the wood feel awake in your hands. But wood is less than half the battle. So many guitarists make the mistake of buying the lumber instead of the luthier.
Pickups: Magnetic Hopes and Dreams
The engine of the guitar, pickups are the part that allegedly defines the electric guitar’s voice. Sure, swapping pickups will alter the tonality, to use a color metaphor, but they can only translate what’s already there, and there’s little percentage in trying to wake the dead. Yet, pickups do matter. A PAF-style might offer more harmonic complexity, or an overwound single-coil may bring some extra snarl, but here’s the thing: Two pickups made to the same specs can still sound different. The wire tension, the winding pattern, or even the temperature on the assembly line that day all add tiny variables that the spec sheet doesn’t mention. Don’t even get me started about the unrepeatability of “hand-scatter winding,” unless you’re a compulsive gambler.
“One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.”
Wires, Caps, and Wishful Thinking
Inside the control cavity, the pots and capacitors await, quietly shaping your tone whether you notice them or not. A potentiometer swap can make your volume taper feel like an on/off switch or smooth as an aged Tennessee whiskey. A capacitor change can make or break the tone control’s usefulness. It’s subtle, but noticeable. The kind of detail that sends people down the rabbit hole of swapping $3 capacitors for $50 “vintage-spec” caps, just to see if they can “feel” the mojo of the 1950s.
Hardware: The Unsung Saboteur
Bridges, nuts, tuners, and tailpieces are occasionally credited for their sonic contributions, but they’re quietly running the show. A steel block reflects and resonates differently than a die-cast zinc or aluminum bridge. Sloppy threads on bridge studs can weigh in, just as plate-style bridges can couple firmly to the body. Tuning machines can influence not just tuning stability, but their weight can alter the way the headstock itself vibrates.
It’s All Connected
Then there’s the neck joint—the place where sustain goes to die. A tight neck pocket allows the energy to transfer efficiently. A sloppy fit? Some credit it for creating the infamous cluck and twang of Fender guitars, so pick your poison. One of the most important specs is scale length. A longer scale not only creates more string tension, it also requires the frets to be further apart. This changes the feel and the sound. A shorter scale seems to diminish bright overtones, accentuating the lows and mids. Scale length has a definite effect on where the neck joins the body and the position of the bridge, where compromises must be made in a guitar’s overall design. There are so many choices, and just as many opportunities to miss the mark. It’s like driving without a map unless you’ve been there before.
Alchemy, Not Arithmetic
At the end of the day, a guitar’s greatness doesn’t come from its spec sheet. It’s not about the wood species or the coil-wire gauge. It’s about how it all conspires to either soar or sink. Two guitars, built to identical specs, can feel like long-lost soulmates or total strangers. All of these factors are why mix-and-match mods are a long game that can eventually pay off. But that’s the mystery of it. You can’t build magic from a parts list. You can’t buy mojo by the pound. A guitar is more than the sum of its parts—it’s a sometimes unpredictable collaboration of materials, choices, and human touch. And sometimes, whether in the hands of an experienced builder or a dedicated tinkerer, it just works.
Two Iconic Titans of Rock & Metal Join Forces for a Can’t-Miss North American Trek
Tickets Available Starting Wednesday, April 16 with Artist Presales
General On Sale Begins Friday, April 18 at 10AM Local on LiveNation.com
This fall, shock rock legend Alice Cooper and heavy metal trailblazers Judas Priest will share the stage for an epic co-headlining tour across North America. Produced by Live Nation, the 22-city run kicks off September 16 at Mississippi Coast Coliseum in Biloxi, MS, and stops in Toronto, Phoenix, Los Angeles, and more before wrapping October 26 at The Cynthia Woods Mitchell Pavilion in The Woodlands, TX.
Coming off the second leg of their Invincible Shield Tour and the release of their celebrated 19th studio album, Judas Priest remains a dominant force in metal. Meanwhile, Alice Cooper, the godfather of theatrical rock, wraps up his "Too Close For Comfort" tour this summer, promoting his most recent "Road" album, and will have an as-yet-unnamed all-new show for this tour. Corrosion of Conformity will join as support on select dates.
Tickets will be available starting Wednesday, April 16 at 10AM local time with Artist Presales. Additional presales will run throughout the week ahead of the general onsale beginning Friday, April 18 at 10AM local time at LiveNation.comTOUR DATES:
Tue Sep 16 – Biloxi, MS – Mississippi Coast Coliseum
Thu Sep 18 – Alpharetta, GA – Ameris Bank Amphitheatre*
Sat Sep 20 – Charlotte, NC – PNC Music Pavilion
Sun Sep 21 – Franklin, TN – FirstBank Amphitheater
Wed Sep 24 – Virginia Beach, VA – Veterans United Home Loans Amphitheater
Fri Sep 26 – Holmdel, NJ – PNC Bank Arts Center
Sat Sep 27 – Saratoga Springs, NY – Broadview Stage at SPAC
Mon Sep 29 – Toronto, ON – Budweiser Stage
Wed Oct 01 – Burgettstown, PA – The Pavilion at Star Lake
Thu Oct 02 – Clarkston, MI – Pine Knob Music Theatre
Sat Oct 04 – Cincinnati, OH – Riverbend Music Center
Sun Oct 05 – Tinley Park, IL – Credit Union 1 Amphitheatre
Fri Oct 10 – Colorado Springs, CO – Broadmoor World Arena
Sun Oct 12 – Salt Lake City, UT – Utah First Credit Union Amphitheatre
Tue Oct 14 – Mountain View, CA – Shoreline Amphitheatre
Wed Oct 15 – Wheatland, CA – Toyota Amphitheatre
Sat Oct 18 – Chula Vista, CA – North Island Credit Union Amphitheatre
Sun Oct 19 – Los Angeles, CA – Kia Forum
Wed Oct 22 – Phoenix, AZ – Talking Stick Resort Amphitheatre
Thu Oct 23 – Albuquerque, NM – Isleta Amphitheater
Sat Oct 25 – Austin, TX – Germania Insurance Amphitheater
Sun Oct 26 – Houston, TX – The Cynthia Woods Mitchell Pavilion
*Without support from Corrosion of Conformity