
Photo 1
Can you turn a vintage Fender Vibrolux Reverb into a mini Super Reverb?
This month I've decided to forgo answering a question—not that I don't have plenty, and thank you for that, loyal readers. Instead we'll explore a mod to a blackface Fender Vibrolux Reverb and the thinking behind it. It's an easy and completely reversible that yields what I consider to be a more versatile amp.
Not long ago, a customer brought me a Vibrolux combo he'd recently acquired. He wanted to make it one of his regular gigging amps, so he asked me to make sure it was roadworthy. He wanted new caps, tubes, and whatever else was needed. He also wanted to remove and safely stash the original speakers while they were still in working condition. His idea was to thrash a new set of speakers on gigs and not be concerned about reliability or destroying a piece of Fender history.
Replacing speakers is actually a great upgrade for any amp of this era because speakers grow tired over the years, and a fresh set can yield a far greater improvement than most players would believe. In fact, when I install new speakers in an old amp, the owner typically experiences a wow moment. (If you have an older amp, try it—you might have that reaction too.)
Before I dive into repairing or modding an amp, I always ask how the owner expects to use it. For example: Do you like to play dirty, or are you after a big, clean tone with maximum headroom? This feedback gives me an idea of what type of tubes to install and how to tailor the circuit to the player.
It turned out this customer performs a lot of music inspired by Jonny Lang and Kenny Wayne Shepherd. Great—this gave me a reference and prompted me to offer some suggestions. We all know these players were very influenced by the late, great SRV.
Before I dive into repairing or modding an amp, I always ask how the owner expects to use it.
In my brief time working with Stevie before his death, I saw that his massive backline included two Fender Super Reverb combos, each loaded with four Electro-Voice 10s—his favorite speakers for these amps. How he managed to blow speakers with such massive power handling capability with a 40-watt Super is beyond me, but his tech at the time, the legendary René Martinez, always had spares on hand. Anyway, let's see what this knowledge can do for my customer.
First, a Vibrolux Reverb is a bit like a mini Super Reverb. With a dual-6L6 output stage, the amps offer about the same power, but the Vibrolux has two 10s instead of the Super's quad set. But they're voiced differently: While most blackface and silverface Fenders use the same value capacitors in the tone stack—a 250 pF, a 0.1 µF, and a 0.047 µF—the Super Reverb has a 0.022 µF cap in place of the 0.047 µF.
My suggestion was to modify the tone stack in the Vibrolux's first channel. This way, one channel would remain stock, the other would be a bit more like a Super, and he could use an A/B switch to access either channel as desired.
Regarding speakers: Unless you can afford a roadie, I wouldn't advise loading a Super or even a Vibrolux Reverb with EV 10s. These bad boys are heavy! Instead, I suggested swapping in a lighter set of contemporary 10s that sound similar to the EVs. The owner agreed, so let's look at what we did.
Photo 1 shows how I've installed not one but two new caps in the amp's first channel. I like replacing both the .047 and 0.1 µF caps with .022 µF caps. It makes the channel a bit beefier, and that's nice for a guitar with single-coil pickups. It also leans more towards a Marshall tone stack at this point ... but not quite. Of course, Stevie was also a Marshall guy (got to love those 200-watt Majors), so if you really want to go all the way, you can replace the 250 pF treble cap with a 470 pF, but that's not something I wanted from this particular amp.
Photo 2
Now, at this point I'm sure some of you are saying, "Yeah, cool, but there's no reverb on the first channel." Well my friends, I have a bonus for you. Look at Photo 2 and notice the blue wire. That's the audio signal wire from channel 1, which was originally connected to the circled eyelet on the right. Simply remove the wire from this connection at the input of the phase inverter and connect it to the input of the reverb drive circuit, as illustrated on the left of the photo. This routes the channel 1 signal to the reverb and tremolo circuits.
Photo 3
Cool—one more bonus! Finally, for just a little extra push, I like to move the unused 220k resistor and place it in parallel with the other 220k resistor at the input to the phase inverter (see photo).
After making these mods, I installed a new pair of 10" speakers (Photo 3), and the amp was ready for the road.
[Updated 9/1/21]
- Rig Rundown: Striking Matches - Premier Guitar ›
- Silver and Black: Simple Tube Tricks for Beginners - Premier Guitar ›
- Meet My 1965 Super Reverb—The Greatest Amp I've Ever Played - Premier Guitar ›
- Meet My 1965 Super Reverb—The Greatest Amp I've Ever Played - Premier Guitar ›
- DIY: Amp Safety 101 - Premier Guitar ›
- Must Know Amp First-Aid - Premier Guitar ›
- Silver and Black: Simple Tube Tricks for Beginners - Premier Guitar ›
- Fender Silver-Panel Owner's Manual Vintage Amps - Premier Guitar ›
- Fender Silver-Panel Owner's Manual Vintage Amps - Premier Guitar ›
- Fender Silver-Panel Owner's Manual Vintage Amps - Premier Guitar ›
Kick off the holiday season by shopping for the guitar player in your life at Guitar Center! Now through December 24th 2022, save on exclusive instruments, accessories, apparel, and more with hundreds of items at their lowest prices of the year.
We’ve compiled this year’s best deals in the 2022 Holiday Gift Guide presented by Guitar Center.
Les Paul Desert Burst Satin
Spark MINI
GAMMA 50w
Fender Classic Series 5 Guitar Case Stand Tweed
Fender Holiday Guitar Cable Keychain
Fender Limited Edition Holiday Sweater
Harbinger MLS1000 Personal Line Array Speaker System
Sterling Audio P10 Dynamic Instrument Microphone
Sterling Audio Harmony H224 USB Audio Interface
Apogee BOOM 2x2 Audio Interface
DiMarzio, Inc. announces the Relentless P (DP299), the Relentless J Bridge (DP301), Relentless J Neck (DP300), and the Relentless J Pair (DP302) for 4 string basses.
DiMarzio, Inc. announces the release of the Relentless P (DP299), the Relentless J Bridge (DP301), Relentless J Neck (DP300), and the Relentless J Pair (DP302) for 4 string basses. The new Relentless P and Relentless J series pickups feature the Relentless cover designed in collaboration with Billy Sheehan.
As with the Relentless pickups, we removed all the hard edges from the standard P Bass and standard J Basspickups, and added an arch to the top of the pickups to bring the sensing coils and pole pieces closer to the strings. These improvements increase the dynamic range and make active circuitry unnecessary.
The Relentless P and Relentless J pickups incorporate Neodymium magnets and produce 70 percent more output than traditional passive pickups, and they’re dead quiet due to the incorporation of metal covers and foil-shielded cables. To dial in (or fine-tune) the individual string output, the Relentless P and Relentless J include eight adjustable pole pieces. These pickups also have a broad magnetic field so you can even bend notes without volume dropout.
DiMarzio’s extra shielding makes the Relentless P and Relentless J better for both recording and stage performances. We’ve mounted them onto robust .09375” thick circuit board base plates to eliminate the annoying protruding mounting screws — ultimately creating a more comfortable and consistent foundation to rest your fingers on.
The new Relentless P steps beyond the traditional P-Bass sound and can only be described as massive. It has more of everything: more volume, beefier lows, a growling midrange, and crispy highs with better individual string definition.
The Relentless J incorporates a new invention, (patent pending) parallelogram-shaped coils, offering an expanded mid-range punch, snappy highs, precise lows, and a new dimension to the sound of the Relentless series pickups.
Relentless P and Relentless J pickups will breathe new life into any bass, increase playability, and work well for any style of music from Motown to metal.
DiMarzio’s Relentless P, Relentless J Bridge, Relentless J Neck, and Relentless J pair are made in the U.S.A. and may now be ordered for immediate delivery.
Suggested List Price for the Relentless P is $169.00 (MAP $119.99).
Suggested List Price for the Relentless J Bridge and Relentless J neck is $155.00 (MAP $109.99).
Suggested List Price for the Relentless J Pair is $296.00 (MAP 209.99).
For more information, please visit our website at dimarzio.com.
Mystery Stocking is coming soon! Sign up for PG Perks below so you don't miss it.
Sign up for PG Perks on the form below to make sure you don't miss the launch announcement!
About Mystery Stocking
Each year, Premier Guitar likes to put out these mystery boxes as a part of bringing some fun to the holiday season. Remember, this is supposed to be a fun holiday treat! If the contents of this box will ruin your holiday, deplete the last of your bank account, or end your ability to see the good in humanity, it may not be for you.
- This year's Mystery Stocking will cost $44.95. ($39.95 + $5 Flat shipping)
- Each box will be guaranteed to contain $40 or more in value.
- US only. (Sorry World.)
- Make sure your shipping address is correct.
- Have your credit card ready to go before you refresh the page. Paypal is not available. Autofill may not fill in your information.
- There will be NO REFUNDS given.
- There has been a huge demand for these in the past. We really did sell out in less than 4 minutes last year. When they are gone, they are gone.
- One per household, one per person.
Q: What's in the Mystery Stocking?
A: It wouldn't be much of a surprise if we told you, now would it?
Q: Will I definitely get my money worth?
A: Yep.
Q: Can I return it if I don't like it?
A: Nope. All sales final.
Q: What if I live outside the US?
A: Sorry, US only.
Q. How much is it?
A. $39.95 Plus $5 shipping
Q. When will it ship?
A. On or before December 10, 2022.
Q. What form of payment do you accept?
A. Credit cards only. Sorry, no Paypal for this.
Q. Can I ship to a different location than my billing address?
A. Yes
Q. I tried last year and didn't get one. Will I get one this year?
A. There is an overwhelming demand for Mystery Stocking. Be sure you have a fast internet connection and be ready when they go on sale. Last year we sold out in 3 min 33 seconds.
Q. I want to buy 5. How can I buy 5?
A. You can't. This year, we're limiting to one per household, so more people can get in on the fun!
Featuring the Adaptive Circuitry recently introduced on their Halcyon Green Overdrive, Origin Effects have brought us a pedal with a character all of its own and a new flavor of drive.
Origin Effects introduce the new M-EQ DRIVER mid booster & drive pedal. Based on a vintage Pultec studio EQ, this unique pedal offers a range of mid-focused tones, from a subtle mid boost to thick, resonant overdrive. Featuring the Adaptive Circuitry recently introduced on their Halcyon Green Overdrive, Origin Effects have brought us a pedal with a character all of its own and a new flavor of drive.
A choice of three mid-range frequencies ensures that you can boost just the right part of your guitar signal and, when pushed harder, can elicit a range of saturation from a classic “mid-hump” overdrive to fierce “cocked wah” distortion. Thanks to the Adaptive Circuitry, the high-end roll-off of the Cut control is reduced as the pedal cleans up. This allows for a smooth transition from warm overdrive to bright clean tones in response to playing dynamics or guitar volume knob changes.
Introducing... M-EQ DRIVER || Mid Booster & Drive
Built-in the UK to the highest standards, the M-EQ DRIVER continues the Origin Effects tradition of vintage, studio-inspired tones in modern guitar pedals. The Origin Effects M-EQ DRIVER is available now from Origin Effects dealers worldwide.
RRP: 259 GBP (Inc VAT) / 319 USD (Ex TAX)
For more information, please visit origineffects.com.