Premier Guitar features affiliate links to help support our content. We may earn a commission on any affiliated purchases.

The Recording Guitarist: Should You Change Your Electric's Strings Before Tracking?

The Recording Guitarist: Should You Change Your Electric's Strings Before Tracking?
If your strings are too crusty to play, you can always boil them and make a hearty soup.

Sometimes—depending on the vibe you’re hunting—new isn’t always best.

Hey, remember that guitar mag article on prepping for studio work? The one that said you should always change strings before recording because you want the brightest, loudest, most accurately intonated sound? I've edited words to that effect often over the years.


Then there was that column that told you to avoid last-minute string changes at all costs, because well-worn strings provide better tuning stability, more consistent dynamics, and fewer finger-squeaks. Yeah, I've edited that article at least as many times.

So who's right? I'll whip out my standard wishy-washy answer: "They both are—it depends on the context." So let's listen objectively and consider those contexts.

Unless you're cutting a solo guitar recording, the tone in isolation doesn't mean crap.

Don't you ever wash that thing?

Let's start with a recording made with filthy, disgusting strings. I grabbed my battered but beloved Hamer 25th Anniversary model (a Gibson-flavored axe retrofitted with Seymour Duncan's Joe Bonamassa PAF pickups). These days I play flatwounds almost exclusively, but I string this guitar with roundwounds to have a "normal" reference for gear reviews. It had worn the same set of U.S.-made, all-nickel strings (gauged .011-.052) for something like 18 months. I hadn't cleaned the fretboard in years, and it was thick with muck. You could have planted a crop of potatoes between the 3rd and 4th frets.

Ex. 01 Old Strings (Dry)

Still, the strings didn't intonate too terribly, so I plugged in and improvised a short phrase, recording direct and then reamping through a small combo with a hint of spring reverb, but with no additional EQ or compression in my DAW (Ex. 1).

A little plonky-sounding, perhaps, but it's not that dreadful, is it?

Ex. 02 New Strings (Dry)

Next I snipped off the ancient strings, gave the fretboard a desperately needed scrub, and installed a new set of the same string type. I played and stretched strings for five minutes or so, and then duplicated the performance at identical recording settings (Ex. 2).

As expected, there's a bit more shimmer. And curiously, it sometimes feels like the low-mids have been scooped relative to Ex. 1, though I suspect that's a psychoacoustic side effect of the revitalized highs.

Ex. 03 Old Strings (EQ)

But how meaningful is this difference in timbre? Could you duplicate the brighter treble via EQ? Check out Ex. 3, which is simply Ex. 1 again, but with a bit of a DAW EQ bump around 2 kHz.

The EQ doesn't exactly make the old strings sound new, but to my ears, the modified old-string clip now sounds closer to Ex. 2 than to its original pre-EQed tone.

Ex. 04 Old Strings (Mix)

Which sounds best? Stop—don't answer that question! It's a trick! Because unless you're making a solo guitar recording, the tone in isolation doesn't mean crap.

Ex. 05 New Strings (Mix)

Let's consider the tonal differences in the context of a band arrangement, using typical mix effects. Ex. 4 features the old strings. Ex. 5 features the new ones.

06 Old Strings (EQ'd Mix)

And in Ex. 6 the old strings are EQed to sound newer.

Um, not super dramatic, is it? It's a reminder that the quality and intensity of a performance is approximately 937 times more important than such subtle tone variations.

Making soup. Now that we have a doubled part played on very old and very news strings, what sort of sonic mischief can we get into?

Ex. 07 (Pseudo Flange)

In Ex. 07 you hear both guitars panned in center for an "organic flange" effect.

Ex. 08 (Wide Image)

The tracks are panned far left and right in Ex. 08 for a dramatic stereo spread.

Ex. 09 (Filter Mesh)

Finally, Ex. 09 is a complex mesh: Both tracks are routed through filters, but the left-panned track's filter is panned right, and vice-versa.

Change for the better?

I suppose my answer to the "should I change strings?" conundrum is, "Eh, whatever." My advice is to go with whatever is most likely to inspire your best performance. Maybe worn-in wires make you feel cool and confident, like some old-school Stax session cat who hasn't swapped strings since 1962. Or maybe installing a fresh set is an upbeat preparation ritual, like sharpening your pencils and organizing your desk before an inspired day of writing. (Though, as any writer's-block sufferer can tell you, sharpening and organizing can become obsessive habits that flourish in lieu of writing.) Musician, know thyself and string accordingly.

[Updated 10/15/21]

The Return of Johnny Cash—John Carter Cash Interview
The Return of Johnny Cash—John Carter Cash Interview on Johnny’s New Songwriter Album

The Man in Black returns with the unreleased Songwriter album. John Carter Cash tells us the story.

Read MoreShow less

This 1968 Epiphone Al Caiola Standard came stocked with P-90s and a 5-switch Tone Expressor system.

Photo courtesy of Guitar Point (guitarpoint.de)

Photo courtesy of Guitar Point (guitarpoint.de)

The session ace’s signature model offers a wide range of tones at the flip of a switch … or five.

Hello and welcome back to Mod Garage. Not long ago, I came home late from a band rehearsal, still overly excited about the new songs we played. I got myself a coffee (I know, it's a crazy procedure to calm down) and turned on the TV. I ended up with an old Bonanza episode from the ’60s, the mother of all Western TV series. Hearing the theme after a long time instantly reminded me of the great Al Caiola, who is the prolific session guitarist who plays on the song. With him in mind, I looked up the ’60s Epiphone “Al Caiola” model and decided I want to talk about the Epiphone/Gibson Tone Expressor system that was used in this guitar.

Read MoreShow less

Slinky playability, snappy sounds, and elegant, comfortable proportions distinguish an affordable 0-bodied flattop.

Satisfying, slinky playability. Nice string-to-string balance. Beautiful, comfortable proportions.

Cocobolo-patterned HPL back looks plasticky.

$699

Martin 0-X2E
martinguitar.com

4
4
4.5
4

Embracing the idea of an acoustic flattop made with anything other than wood can, understandably, be tricky stuff. There’s a lot of precedent for excellent-sounding acoustics built with alternative materials, though. Carbon-fiber flattops can sound amazing and I’ve been hooked by the sound and playability of Ovation and Adamas instruments many times.

Read MoreShow less

The GibsonES Supreme Collection (L-R) in Seafoam Green, Bourbon Burst, and Blueberry Burst.

The new Gibson ES Supreme offers AAA-grade figured maple tops, Super Split Block inlays, push/pull volume controls, and Burstbucker pickups.

Read MoreShow less