[Originally published February 14, 2022]
Welcome to another Dojo! This time I’m going to show you how to reamp your guitar and explore some creative ways you can re-amps other tracks as well (soft synths, vocals, drums, etc.). In my earlier column “Why Guitarists Shouldn’t Diss DIs,” I mentioned the benefits of using a DI for creative recording. If you have a DI box, dust it off! You’ll need it when I show you how to get more out of your DI-recorded guitar and bass tracks by reamping them into your pedals and amps to capture new perspectives and even add some new reverberant spaces. Tighten up your belts, the Dojo is now open.
To begin, you’re going to need a reamp box such as the Radial JCR Studio Reamper ($229 street) and most likely a TRS-to-male XLR cable (like the Asterope Pro Studio Series TRS to XLRs, $55 street). I like passive re-amp boxes because they don’t require external power and are easy to move around. Some would argue that passive models loose signal strength, which is true, but how many boost/overdrive pedals do we guitarists have? At least one, right? Put one after the reamp box and before your amp. Boom. Problem solved, and you can drive your amp even harder. Otherwise, you’re going to shell out more dinero for active reamp boxes, which isn’t really necessary, and I like the inherent lo-fi nature of this process.
Reamping is a two-part endeavor. The first part involves using a DI box to record the guitar directly into your DAW. If you’re unsure how to do this, I recommend going online and reading my Dojo article mentioned above. It’s very easy and straightforward. The second part involves routing the DI-recorded guitar track out of your DAW and into your reamp pedal. Depending on your interface, you might need the TRS-to-male XLR cable previously mentioned.
Fig. 1
Look at Fig. 1 and do the following: Plug the XLR end of the cable from your audio interface’s out into the input of your reamp box. Now use your regular guitar cable and connect the output of your reamp box to the input of your amp. Place a microphone in front of your guitar amp, plug that into your interface, and record-enable that track. When you hit playback, the DI track will play back through your amp, and you will be recording the amp. You’re now re-amping! You can make new recordings each time you change amp settings or mic positions.
Fig. 2
For even more craziness, check out Fig. 2. You can add any (and all) pedals (even entire pedalboards) into the signal chain. Get creative. But wait, there’s more!
You can also route any track’s output in your DAW to your reamp box and really start going berserk. Try your lead vocal, the background vocals, keys, and drums (especially drum machines) and listen to how it sounds. Reamping also gives you the ability to manually tweak pedal knobs and make dynamic parts that are really changing as the track plays. Try playing with the times and feedback amount of your delays. Fun!
Finally, depending on how much you are driving your amp, you could keep it clean, move the mic further away from the speaker, and start capturing more of the sound of your room. I like to do this on drum machines. It puts them in a real space. Specifically, your space. No reverb plug-in can get that! As always, I invite you to come by my website to hear and see these concepts in action. Until next time, namaste.
Huge shocker incoming: Zach Broyles made a Tube Screamer. The Mythos Envy Pro Overdrive is Zach’s take on the green apple of his eye, with some special tweaks including increased output, more drive sounds, and a low-end boost option. Does this mean he can clear out his collection of TS-9s? Of course not.
This time on Dipped in Tone, Rhett and Zach welcome Tyler Bryant, the Texas-bred and Nashville-based rocker who has made waves with his band the Shakedown, who Rhett credits as one of his favorite groups. Bryant, it turns out, is a TS-head himself, having learned to love the pedal thanks to its being found everywhere in Texas guitar circles.Bryant shares how he scraped together a band after dropping out of high school and moving to Nashville, including the rigors of 15-hour drives for 30-minute sets in a trusty Ford Expedition. He’s lived the dream (or nightmare, depending on the day) and has the wisdom to show it.
Throughout the chat, the gang covers modeling amps and why modern rock bands still need amps on stage; the ins and outs of recording-gear rabbit holes and getting great sounds; and the differences between American and European audiences. Tune in to hear it all.
Get 10% off your order at stewmac.com/dippedintone
Hats off to Carmen Vandenberg of Bones UK, our celebrity Question of the Month respondent.
Guest Picker - Carmen Vandenberg, Bones UK
The cover of Soft, Bones UK’s new album, due in mid-September.
A: My favorite method these days (and to be honest, from when I started playing) is to put on my favorite blues records, listen with my eyes closed, and, at the end, see what my brain compartmentalizes and keeps stored away. Then, I try and play back what I heard and what my fingers or brain decided they liked!
Bone UK’s labelmade, Des Rocks.
Obsession: Right now, I am into anyone trying to create sounds that haven’t been made before—bands like Queens of the Stone Age, Jack White, and our labelmate, Des Rocs! There’s a Colombian band called Diamanté Electrico who I’ve been really into recently. Really anyone who’s trying to create innovative and inspiring sounds.
Reader of the Month - Sam C. Schiff.
Sam spent endless hours trying to learn the solo Leslie West played on “Long Red,” off of The Road Goes Ever On.
A: The best way to learn guitar is to listen to some good guitar playing! Put on a record, hear something tasty, and play on repeat until it comes out of your fingers. For me, it was Leslie West playing “Long Red” on the Mountain album, The Road Goes Ever On. I stayed up all night listening to that track until I could match Leslie’s phrasing. I still can’t, no one can, but I learned a lot!
Smith’s own low-wattage amp build.
Obsession: My latest musical obsession is low-wattage tube amps like the 5-watt Fender Champ heard on the Laylaalbum. Crank it up all the way for great tube distortion and sustain, and it’s still not loud enough to wake up the neighbors!
Gear Editor - Charles Saufley
Charles Saufley takes to gear like a duck to water!
A: Learning by ear and feel is most fun for me. I write and free-form jam more than I learn other people’s licks. When I do want to learn something specific, I’ll poke around on YouTube for a demo or a lesson or watch films of a player I like, and then typically mangle that in my own “special” way that yields something else. But I rarely have patience for tabs or notation.
The Grateful Dead’s 1967 debut album.
Obsession: Distorted and overdriven sounds with very little sustain—Keith Richards’ Between the Buttons tones, for example. Jerry Garcia’s plonky tones on the first Grateful Dead LP are another cool, less-fuzzy version of that texture.
Publisher - Jon Levy
A: I’m a primitive beast: The only way I can learn new music is by ear, so it’s a good thing I find that method enjoyable. I’m entirely illiterate with staff notation. Put sheet music in front of me and I’ll stare at it with twitchy, fearful incomprehension like an ape gaping at the monolith in 2001: A Space Odyssey. I’m almost as clueless with tab, but I can follow along with chord charts if I’m under duress.
The two-hit wonders behind the early ’70s soft-rock hits, “Fallin’ in Love” and “Don't Pull Your Love.”
Obsession: Revisiting and learning AM-radio pop hits circa 1966–1972. The Grass Roots, Edison Lighthouse, the Association, the Archies, and Hamilton, Joe Frank & Reynolds—nothing is too cheesy for me to dissect and savor. Yes, I admit I have a serious problem.
