
Selenium, an alternative to silicon and germanium, helps make an overdrive of great nuance and delectable boost and low-gain overdrive tones.
Clever application of alternative materials that results in a simple, make-everything-sound-better boost and low-gain overdrive.
Might not have enough overdrive for some tastes (although that’s kind of the idea).
$240 street
Cusack Project 34 Selenium Rectifier Pre/Drive Pedal
cusackmusic.com
The term “selenium rectifier” might be Greek to most guitarists, but if it rings a bell with any vintage-amp enthusiasts that’s likely because you pulled one of these green, sugar-cube-sized components out of your amp’s tube-biasing network to replace it with a silicon diode.
That’s a long-winded way of saying that, just like silicon or germanium diodes—aka “rectifiers”—the lesser-seen selenium can also be used for gain stages in a preamp or drive pedal. Enter the new Project 34 Selenium Rectifier Pre/Drive from Michigan-based boutique maker Cusack, named after the element’s atomic number, of course.
An Ounce of Pre-Vention
As quirky as the Project 34 might seem, it’s not the first time that company founder Jon Cusack indulged his long-standing interest in the element. In 2021, he tested the waters with a small 20-unit run of the Screamer Fuzz Selenium pedal and has now tamed the stuff further to tap levels of gain running from pre-boost to light overdrive. Having used up his supply of selenium rectifiers on the fuzz run, however, Cusack had to search far and wide to find more before the Project 34 could launch.
“Today they are usually relegated to just a few larger industrial and military applications,” Cusack reports, “but after over a year of searching we finally located what we needed to make another pedal. While they are a very expensive component, they certainly do have a sound of their own.”
The control interface comprises gain, level, and a traditional bright-to-bassy tone knob, the range of which is increased exponentially by the 3-position contour switch: Up summons medium bass response, middle is flat response with no bass boost, and down is maximum bass boost. The soft-touch, non-latching footswitch taps a true-bypass on/off state, and power requires a standard center-negative 9V supply rated at for least 5 mA of current draw, but you can run the Project 34 on up to 18V DC.
Going Nuclear
Tested with a Telecaster and an ES-355 into a tweed Deluxe-style 1x12 combo and a 65 Amps London head and 2x12 cab, the Project 34 is a very natural-sounding low-gain overdrive with a dynamic response and just enough compression that it doesn’t flatten the touchy-feely pick attack. The key adjectives here are juicy, sweet, rich, and full. It’s never harsh or grating.
“The gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character.”
There’s plenty of output available via the level control, but the gain knob is pretty subtle from 10 o’clock up, which actually helps keep the Project 34 in character. Settings below there remain relatively clean—amp-setting dependent, of course—and from that point on up the overdrive ramps up very gradually, which, in amp-like fashion, is heard as a slight increase in saturation and compression. The pedal was especially fantastic with the Telecaster and the tweed-style combo, but also interacted really well with humbuckers into EL84s, which certainly can’t be said for all overdrives.
The Verdict
Although I almost hate to use the term, the Project 34 is a very organic gain stage that just makes everything sound better, and does so with a selenium-driven voice that’s an interesting twist on the standard preamp/drive. For all the variations on boost and low/medium-gain overdrive out there it’s still a very welcome addition to the market, and definitely worth checking out—particularly if you’re looking for subtler shades of overdrive.
Paul Reed Smith also continues to evolve as a guitarist, and delivered a compelling take on Jeff Beck’s interpretation of “Cause We’ve Ended As Lovers” at the PRS 40th Anniversary Celebration during this year’s NAMM.
After 40 years at the helm of PRS Guitars, our columnist reflects on the nature of evolution in artistry—of all kinds.
Reflecting on four decades in business, I don’t find myself wishing I “knew then what I know now.” Instead, I’m grateful to still have the curiosity and environment to keep learning and to be in an art that has a nonstop learning curve. There’s a quote attributed to artist Kiki Smith that resonates deeply with me: “I can barely control my kitchen sink.” That simple truth has been a guiding principle in my life. We can’t control the timing of knowledge or discovery. If profound learning comes late in life, so be it. The important thing is to remain open to it when it arrives.
I look at what’s happened at PRS Guitars over the last 40 years with real pride. I love what we’ve built—not just in terms of instruments but in the culture of innovation and craftsmanship that defines our company. The guitar industry as a whole has evolved in extraordinary ways, and I’m fortunate to be part of a world filled with passionate, talented, and good-hearted people.
I love learning. It may sound odd, but there’s something almost spiritual about it. Learning isn’t constant; it comes in stages. Sometimes, there are long dry spells where you can even struggle to hold onto what you already know. Other times, learning is sporadic, with nuggets of understanding appearing here and there that are treasured for their poignancy. And then there are those remarkable moments when the proverbial floodgates open, and the lessons come so fast that you can barely keep up. I’ve heard songwriters and musicians describe this same pattern. Sometimes, no new songs emerge; sometimes, they trickle out one by one; and sometimes, they arrive so quickly it’s impossible to capture them all. I believe it’s the same for all creatives, including athletes, engineers, and everyone invested in their art.
Looking back over 40 years in business and a decade of preparation before that, I recognize these distinct phases of learning. Right now, I’m in one of those high-gain learning periods. I’ve taken on a teacher who is introducing me to concepts I never imagined, ideas I didn’t think anyone could explain—things I wasn’t even sure I was worthy of understanding. But when he calls and says, “Have you thought about this?” I lean in, eager to absorb, not just to learn something new for myself, but because I want him to feel his teaching is appreciated, making it more likely that the teaching continues.
“Learning isn’t just about accumulating knowledge; it’s about applying it, sharing it, and evolving because of it.”
Beyond structured teaching, learning also comes through experience, discovery, and problem solving. We recently got our hands on some old, magical guitars, vintage pickups, microphones, and mic preamps. These aren’t just relics; they’re windows into a deeper understanding of how things work and what the engineers who invented them knew. By studying the schematics of tube-mic preamps, we’re uncovering insights that directly influence how we wire guitar pickups and their electronics. It may seem like an unrelated field, but the many parallels in audio engineering are there if you look. Knowledge in one area has a ripple effect, unlocking new possibilities in another.
Even as I continue learning, I recognize that our entire team at PRS is on this journey with me. We have people whose sole job is to push the boundaries of what we understand about pickups, spending every day refining and applying that knowledge so that when you pick up a PRS guitar, it sounds better. More than 400 people work here, each contributing to the collective advancement of our craft. I am grateful to be surrounded by such a dedicated and smart team.
One of my favorite memories at PRS was at a time we were deep into investigating scale lengths on vintage guitars, and some unique pickup characteristics, when one of our engineering leaders walked into my office. He had just uncovered something astonishing and said, “You’re not going to believe this one.” That excitement and back-and-forth exchange of ideas is what keeps this work so rewarding.
As I reflect on my journey, I see that learning isn’t just about accumulating knowledge; it’s about applying it, sharing it, and evolving because of it. I get very excited when something we’ve learned ends up on a new product. Whether lessons come early or late, whether they arrive in waves or trickles, there is always good work to be done. And that is something I just adore.
PG contributor Tom Butwin demos seven direct boxes — active and passive — showing off sound samples, features, and real-world advice. Options from Radial, Telefunken, Hosa, Grace Design, and Palmer offer solutions for any input, setting, and budget.
Grace Design m303 Active Truly Isolated Direct Box
The Grace Design m303 is an active, fully isolated DI box, delivering gorgeous audio performance for the stage and studio. Our advanced power supply design provides unbeatable headroom and dynamic range, while the premium Lundahl transformer delivers amazing low-end clarity and high frequency detail. True elegance, built to last.
Rupert Neve Designs RNDI-M Active Transformer Direct Interface
Compact design, giant tone. The RNDI-M brings the stunning tone & clarity of its award-winning counterparts to an even more compact and pedalboard-friendly format, with the exact same custom Rupert Neve Designs transformers and discrete FET input stage as the best-selling RNDI, RNDI-S and RNDI-8.
Telefunken TDA-1 1-channel Active Instrument Direct Box
The TDA-1 phantom powered direct box uses high-quality components and classic circuitry for rich, natural sound. With discrete Class-A FET, a European-made transformer, and a rugged metal enclosure, it delivers low distortion and a broad frequency response. Assembled and tested in Connecticut, USA, for reliable performance and superior sound.
Hosa SideKick Active Direct Box
The Hosa SideKick DIB-445 Active DI delivers clear, strong signals for live and studio use. Ideal for guitars, basses, and keyboards, it minimizes interference over long runs. Features include a pad switch, ground lift, and polarity flip. With a flat frequency response and low noise, it ensures pristine audio.
Radial JDI Jensen-equipped 1-channel Passive Instrument Direct Box
The Radial JDI preserves your instrument’s natural tone with absolute clarity and zero distortion. Its Jensen transformer delivers warm, vintage sound, while its passive design eliminates hum and buzz. With a ruler-flat response (10Hz–40kHz) and no phase shift, the JDI ensures pristine sound in any setup.
Radial J48 1-channel Active 48v Direct Box
The Radial J48 delivers exceptional clarity and dynamic range, making it the go-to active DI for professionals. Its 48V phantom-powered design ensures clean, powerful signal handling without distortion. With high headroom, low noise, and innovative power optimization, the J48 captures your instrument’s true tone—perfect for studio and stage.
Palmer River Series - Ilm
The Palmer ilm, an upgraded version of the legendary Palmer The Junction, delivers studio-quality, consistent guitar tones anywhere. This passive DI box features three analog speaker simulations, ensuring authentic sound reproduction. Its advanced filter switching mimics real guitar speaker behavior, making it perfect for stage, home, or studio recording sessions.
Learn more from these brands!
PRS Guitars launches the CE 22 Limited Edition, featuring a 22-fret, 25” scale length, mahogany body, maple top, and vintage-inspired 58/15 LT pickups. With only 1,000 made, this model offers classic PRS aesthetics and a blend of warmth and bolt-on articulation for vintage-inspired tone and modern versatility.
PRS Guitars today announced the launch of the CE 22 Limited Edition. Only 1,000 will be made, marking the brief return of a 22-fret version of this bolt-on mainstay. The 22-fret, 25” scale length CE 22 Limited Edition combines a mahogany body and maple top with a bolt-on maple neck. The guitar is outfitted with PRS’s vintage-inspired 58/15 LT pickups, push/pull tone control, three-way toggle switch, and PRS locking tuners with wing buttons.
“This limited-edition, 22-fret model in our CE line offers classic PRS aesthetics and a voice that blends warmth with bolt-on articulation for vintage-inspired tone and modern versatility,” said PRS Guitars Director of Manufacturing, Paul Miles.
The original CE, with 24 frets, first appeared in stores in 1988 and offered players PRS design and quality with the added snap and response of traditional bolt-on guitars. It wasn’t until 1994 that a 22-fret version debuted, just a few months after the release of the Custom 22. Last in stores in 2008, this refreshed CE 22 Limited Edition marks the model’s return to the market.
With a unique combination of specs, the CE 22 Limited Edition is a different animal from the CE 24. These differences include the model of pickups, placement of pickups, and, of course, the number of frets. That is all while retaining the CE family’s combination of maple and mahogany, nitro finish, PRS Patented Tremolo and Phase III Locking Tuners.
The limited-edition model comes in Black Amber, Carroll Blue, Faded Blue Smokeburst, Faded Gray Black and McCarty Sunburst.
For more information, please visit prsguitars.com.
CE 22 Limited Edition | Demo | PRS Guitars - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Billy Strings' signature dreads are distinguished by a 25" scale and wider nut width.