Dave Friedman evolves the Marshall Super Lead template with a 50-watt thumper that adds tone-shaping flex on top of the Plex.
Bright switches add flexibility. Master volume sounds good at lower levels. Switchable built-in Variac.
No effects loop. Priced at upper end of plexi modern reproduction market
$2,799
Friedman Plex Head
friedmanamplification.com
The first entry in Friedman Amplification’s much-anticipated Vintage Collection is the Plex, a painstakingly crafted homage to Dave Friedman’s own 1968 JMP Super Lead plexi—the archetype and foundation on which the entireFriedman lineup is based.
Any working ’60s JMP Super Lead is an amazing amplifier, but the combination of Dave’s ears, experience, and quality time with his own Super Lead add up to a melding of twists and tradition that captures the richness, power, and dynamics of Marshall non-master-volume amps in a high-quality and, if you want, quieter package.
Stripped Down, Lowdown, Bright, and Brighter
True to lineage, the 50-watt Plex uses a pair of EL34 power tubes and a trio of 12AX7s pulling preamp and phase inverter duties. The familiar volume 1, volume 2, presence, bass, and mid knobs handle gain and EQ tasks. But the Plex deviates from tradition, too. An old Marshall Super Lead has four inputs—high and low sensitivity inputs for channel I and II. The Plex, however, uses a single pair of inputs that are hardwired in jumpered fashion—the same way you might jumper on the front panel of a 2-channel Marshall—effectively mixing the two preamp stages. A post-phase-inverter master volume helps keep the sound pressure level in check when you need to cool it without compromising feel and dynamics. And above each volume knob is a 3-way bright switch. The switches alter the frequency and gain response of the corresponding volume control, toggling between a darker bypassed setting, a mild treble boost enabled by a 100 pF bright capacitor, or a screaming third setting with a 4700 pF cap in the line. The power switch doubles as a high/low voltage selector, engaging an internal Variac that drops operational voltage from 120 volts to 90 volts, achieving the brown sound synonymous with ’80s hard-rock Super Lead applications.
The spartan back panel sports outputs for 4-, 8-, or 16-ohm loads and an IEC mains power input. The head weighs in at a reasonable 34 pounds with dimensions of 24" x 10" x 8.75"—just a hair smaller than a real JMP. The circuit is arrayed on a high-quality printed circuit board—a manufacturing method Friedman favors in many respects for quality control purposes.
But … Does It Van Halen?
Hell yes it does. Dime the Plex, flip it to low voltage, and you’re living in the Eddie zone. Recreating that high-octane, modded-Marshall aggression and kerrang with the most familiar Marshall-style knobs is easy and intuitive. But this amp is full of surprises, too, and many sonic possibilities hide behind the simple additional controls.
The lead channel, controlled by volume 1, is aggressive and edgy, capturing the cut and midrange growl most immediately associated with vintage plexis. Anything below 3 on the gain control is pretty clean. At around 4, hot pickups will induce breakup. And in the 5-to-6 range, it comes alive with rich saturation, enhanced harmonics, and sustain. Approaching 10, the Friedman blossoms into something furious and snarling. The 100 pF bright capacitor setting gently lifts the top end for a hint of jangle, while the 4700 pF cap boosts upper midrange and treble, adding even more chimey range and sharper bite.
The normal channel, controlled by volume 2, feels very much like the antithesis of the lead channel. It’s dark and brooding with lots of resonance in the bass. Keeping the gain below 5 still yields a woolly, forceful voice. Starting around 6 it slips into thick clipping, and as you move toward 10, the Friedman delivers progressively denser tonalities, more compression, and more sustain. The 100 pF bright cap mode adds a splash of air, while the 4700 pF setting significantly jacks the drive and boosts frequencies from 1200 Hz up. Each is a very different version of a cool color.
Sonic Structure
Much of the amp’s tone-shaping flexibility comes from using the volume knobs, not just for gain, but as tone controls to create a best match for a specific guitar. In a general sense, the normal channel adds fullness and body to single-coils, while the lead channel brings definition, bite, and clarity to humbuckers. With a Stratocaster, setting both channel volumes in the 3-to-6 range achieves classic Marshall clean that hints at Hendrix. Strat pickups sound zingy with bright caps bypassed, but the 100 pF setting adds even more attractive shimmer. Lead mode and high gain settings are a nice fit for a Strat, too. Setting the lead channel to 7-to-8 and backing the normal channel to 4 pushes the amp to full-bodied, blistering sustain, and adding the 4700 pF bright cap adds upper midrange urgency. P-90s in a Les Paul Jr. are a more extreme version of this recipe—gritty, snarling, and explosive. But if I ever sensed the signal was lacking, just rolling up the normal channel and using the 100 pF cap did the trick—evoking, more than once, the gritty style of the Pixies’ Joey Santiago.
The Plex’sdynamics and touch sensitivity are outstanding. Using just variation in guitar volume and picking intensity, I effortlessly moved from clean arpeggios to crunch and full-on shred. The low sensitivity input felt especially nice for working with these intensity adjustments, too. It predictably reduces gain, but it also darkens and mellows edgier pickups. The vintage-voiced tone stack is sensitive as well. Treble, mid, bass, and presence controls are accommodating, cover a lot of harmonic range, and even extreme EQ settings never seem to neuter the fundamental voice. If you use pedals, you’ll run them straight into the front of the amp. There’s no effects loop here. Still, a Riveter Electric Brass Tacks treble booster with dark amp settings conjured the sounds of early Sabbath, and the front end easily handled the extra level.
My Kid’s Asleep
Usually, implementing a master volume in this type of circuit can produce sonic anemia at low levels. But Dave Friedman’s addition of a unique post-phase-inverter master volume means you can preserve much more tone, character, and feel at tiny-venue levels. The low-voltage Variac mode offers interesting less-hot options, too, enabling spongier, more saturated, creamier tones at less deafening volumes.
The Verdict
The Plex offers a perfect balance of vintage Marshall-ness and a not-too-busy list of practical extra features—maintaining the essence of plexi tone while expanding tone-shaping functionality and increasing the amp’s useful volume range. But for all its enhancements, the Plex stays close to its vintage inspiration, giving it a brash, raw, unruliness that’s always exciting
Friedman PLEX 50-Watt Tube Amplifier Head
PLEX Vintage Style 50-Watt Head with EL-34 Tubes- Friedman Fuzz Fiend Review ›
- Friedman Small Box Overdrive Review ›
- Friedman Amplification Plex Demo | NAMM 2024 ›
- Friedman Dirty Shirley Mini Review ›
This reader solicited the help of his friend, luthier Dale Nielsen, to design the perfect guitar as a 40th-birthday gift to himself.
This is really about a guy in northern Minnesota named Dale Nielsen, who I met when I moved up there in 2008 and needed somebody to reglue the bridge on my beloved first guitar (a 1992 Charvel 625c, plywood special). Dale is a luthier in his spare time—a Fender certified, maker of jazz boxes.
Anyway, we became friends and I started working on him pretty early—my 40th birthday was approaching, and that meant it was time for us to start designing his first solidbody build. If you stopped on this page, it’s because the photo of the finished product caught your eye. Beautiful, right? The 2018 CCL Deco Custom: Never shall there be another.
Old National Glenwood guitars were my design inspiration, but I wanted a slim waist like a PRS and the like. We used a solid block of korina to start, routed like MacGyver to get the knobs and switches where I wanted them. Dale builds all his own lathes and machines (usually out of lumber, y’all), as the task requires. This beast took some creativity—it’s tight wiring under that custom-steel pickguard. Many were the preliminary sketches. Four coats of Pelham blue, 11 coats of nitro. Honduran mahogany neck, Madagascar ebony fretboard with Dale’s signature not-quite-Super-400 inlays. He designed the logo; I just said, “Make it art deco.”
We sourced all the bits and bobs from StewMac and Allparts and Reverb and the like, mostly to get that chrome look I so adore. Graph Tech Ratio tuners, Duesenberg Radiator trem (had to order that one from Germany), TonePros TP6R-C roller bridge. The pickups were a genius suggestion from the builder, Guitarfetish plug ’n’ play 1/8" solderless swappable, which means I have about 10 pickups in the case to choose from: rockabilly to metal. And both slots are tapped, with the tone knobs serving as single- to double-coil switches. I put the selector on the lower horn to accommodate my tendency to accidentally flip the thing on Les Pauls—definite lifesaver.
Reader and guitar enthusiast, Cody Lindsey.
Dale offered to chamber this monster, but I said what doesn’t kill you makes you stronger. It weighs in at 11 pounds, if it’s an ounce. We carved the neck to match a ’60s SG, so it’s like the mini bat you get at the ballpark on little kids’ day. Easy peasy. 1 11/16" nut, 25" scale, jumbo frets, just 2 1/8" at the 12th fret.
Delivery in its lovely, hygrometer-equipped Cedar Creek case actually happened a month or two shy of my 41st, but hey, you can’t rush these things. We ended up with a studio Swiss Army knife; it does a bit of everything and does it effortlessly. A looker, too. Dale didn’t spend his career doing this kind of thing—he was in IT or some such—and I imagine he’s winding this “hobby” of his down these days, enjoying retirement with a bottle of Killian’s and a lawn chair at Duluth Blues Fest. But this guitar will live on as a marker of his skill and otherworldly patience. It sits at the head of the class in my practice room, welcoming any visitors and bringing a smile to my face every day. And Dale, my friend, I’ll be 50 before you know it....
Cody requested that Dale design an art deco logo for the guitar’s headstock.
Tailored for Yngwie Malmsteen's signature sound, the MXR Yngwie Malmsteen Overdrive is designd to offer simple controls for maximum impact.
Working closely alongside Yngwie, the MXR design team created a circuit that delivers clarity, expressive dynamics, and rich harmonics—all perfectly tailored for his light-speed arpeggios, expressive vibrato, and big, bold riffs. The control setup is simple, with just Level and Gain knobs.
"Want to sound like Yngwie? Crank both knobs to the max."
“This pedal is the culmination of 45+ years developing a sound that’s perfect in every possible way,” Yngwie says. “I present to you: the MXR Yngwie Malmsteen Overdrive. Prepare to be amazed.”
MXR Yngwie Malmsteen Overdrive highlights:
- Perfectly tailored for Yngwie Malmsteen's signature sound and style
- Simple control setup tuned for maximum impact
- Boost every nuance with superior clarity, expressive dynamics, and rich harmonics
- Dig into light-speed arpeggios, expressive vibrato, and big, bold riffs
The MXR Yngwie Malmsteen Overdrive is available now at $129.99 street/$185.70 MSRP from your favorite retailer.
For more information, please visit jimdunlop.com.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.