A decisively dank love letter to the fuzz/phase combo.
Phase and fuzz voices pair well. Simple controls. Radical neon looks.
More controls would open up more possibilities.
$189
Fuzzrocious Electric Ocean
fuzzrociouspedals.com
Pairing a phaser with a fuzz pedal dates to the halcyon days of stompbox invention. Hendrix's Fuzz Face and Uni-Vibe certainly set the stage. But by 1975, Roland packaged phaser and fuzz together in in the AP-7 Jet Phaser, which Larry Graham would use to drive his bass to heavier and funkier places.
The minds behind New Jersey's Fuzzrocious pedals have composed their so-called "love letter" to the Jet Phaser in the form of the Electric Ocean, an original take on a fuzz/phase circuit that is nonetheless heavily inspired by the Jet Phaser's functionality. Created in collaboration with Nicholas Williams of Dunwich Amplification, the Electric Ocean is a relatively straight-ahead stomp. But don't let the simplicity fool you: There's a lot of fun to be had here.
Two's Company
At 5.75" x 4.75", the Electric Ocean takes up more pedalboard room than some will like. But its enclosureāemblazoned with neon pink and yellow seahorsesāwill have plenty of folks asking, "Hey, what's that one?" after the set ends. Three hot-pink knobs control the volume of the phaser signal and two different phase rates, which are selectable via the left footswitch. The two yellow knobs control fuzz volume and tone. At the top of the unit, two toggles select the fuzz/phase effect order and turn the fuzz on and off (the fuzz is not footswitchable). An internal trim pot alters the phase voice via a bandpass filter. It has an impressively wide sweep that offers everything from dark to tinny voicings and a useful range of more conventional phase sounds. To my ears, the trim pot yielded the widest range of tones in the middle setting, so I left it there. Pink and yellow LEDs for the bypass and phase rate switches add extra saccharine charm.
āDialed-In from the Get-Go
Fuzzrocious took care of much of the guesswork associated with using fuzz and phase together by dialing in the basic voices and keeping the ability to adjust them to a minimum. But while there's less control over certain parameters, the basic voices sound really good, so I'm not going to argue with their approach. Using the phaser on its own, I was reminded of the Bob Moog-designed Maestro MP-1, which, like the Fuzzrocious, is a 6-stage OTA-driven circuit. I would happily swap the phaser volume control on the Fuzzrocious with a dry blend knob or the Maestro's "balls" (depth) control. That said, the Fuzzrocious gives me all the control I need to go from satisfying warm, slow ooze to fast ray-gun vibrato sounds, and I can use the left switch to jump between them to my heart's delight. (Switches between phase settings do not ramp in speed and intensity.)
With nothing more than a little spring reverb, the Electric Ocean served doomy riffage just as well as Fillmore-style noodling and basement strumming.
The midrange-focused silicon Fuzz Faceāstyle circuit pairs well with the phase circuit. And pair it shall, because the fuzz effect cannot be used in isolation. The fuzz tone control is subtle, so I mostly set it and forgot it, and used the level to move from moderate fuzz to fully doused saturation. That said, there's nothing delicate about the fuzz in any mode.
With my sound fully sauced, the most dramatic control on the pedal was the effect order switch. It's a lot of fun to hear the fuzz and phaser interact in different ways. With a slower phase feeding the fuzz I found the effect touch-sensitive and interactive. With just a little spring reverb, the Electric Ocean served doomy riffage just as readily as Fillmore-style noodling and basement strumming. And in this effect order you can really hear how the Electric Ocean's simplicity lends flexibility.
Flipping the order and bumping the fuzz volume creates a totally heavy-handed, saturated sound that, like many strong flavors, might not be what you want all the time. But when you want to sound over the top and are less concerned about dynamics, this is the move.
The Verdict
Some might gripe about the Electric Ocean's limited controls. Personally, I applaud Fuzzrocious for keeping the variables to a minimum. It's a confident move that makes the pedal's intent clear and streamlines operation. Sure, I can imagine an external depth knob adding flexibility. But the Electric Ocean sounds great exactly how it is. From clean gurgle-y phaser tones to liquid fuzz bliss, I found my tones quickly and spent my time playing my guitar rather than twiddling knobs.
Fuzzrocious Electric Ocean Demo | First Look
- Fuzzrocious Feed Me Review - Premier Guitar āŗ
- Fuzzrocious Blast Furnace Review - Premier Guitar āŗ
- Add Filter to Fuzz ā¦ and Freak Out - Premier Guitar āŗ
An amp-in-the-box pedal designed to deliver tones reminiscent of 1950s Fender Tweed amps.
Designed as an all-in-one DI amp-in-a-box solution, the ZAMP eliminates the need to lug around a traditional amplifier. Youāll get the sounds of rock legends ā everything from sweet cleans to exploding overdrive ā for the same cost as a set of tubes.
The ZAMPās versatility makes it an ideal tool for a variety of usesā¦
- As your main amp: Plug directly into a PA or DAW for full-bodied sound with Jensen speaker emulation.
- In front of your existing amp: Use it as an overdrive/distortion pedal to impart tweed grit and grind.
- Straight into your recording setup: Achieve studio-quality sound with easeāno need to mic an amp.
- 12dB clean boost: Enhance your tone with a powerful clean boost.
- Versatile instrument compatibility: Works beautifully with harmonica, violin, mandolin, keyboards, and even vocals.
- Tube preamp for recording: Use it as an insert or on your bus for added warmth.
- Clean DI box functionality: Can be used as a reliable direct input box for live or recording applications.
See the ZAMP demo video here: https://www.youtube.com/watch?v=xJp0jE6zzS8
Key ZAMP features include:
- True analog circuitry: Faithfully emulates two 12AX7 preamp tubes, one 12AX7 driver tube, and two 6V6 output tubes.
- Simple gain and output controls make it easy to dial in the perfect tone.
- At home, on stage, or in the studio, the ZAMP delivers cranked tube amp tones at any volume.
- No need to mic your cab: Just plug in and play into a PA or your DAW.
- Operates on a standard external 9-volt power supply or up to 40 hours with a single 9-volt battery.
The ZAMP pedal is available for a street price of $199 USD and can be purchased at zashabuti.com.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibsonās EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (Itās easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didnāt look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as youāre able to find today. āWhy?ā you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fenderās eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ā56), the Longhorn 4623 (ā58), and the Shorthorn 3612 (ā58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses ābaritone guitars,ā to add to our confusion today. But these vintage ābaritonesā were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the ātic-tacā bass sound of Nashville records produced by Chet Atkins, or the āclick-bassā tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
āWhen the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fenderās eye.ā
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button āTone Selector Switchā that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
Itās sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
Itās sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? Thatās because the modelās single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul āBursts. So as people repaired broken āBursts, converted other LPs to āBursts, or otherwise sought to give other Gibsons a āGolden Eraā sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isnāt original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesnāt have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald Cityās $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Baconās āDanelectroās UB-2 and the Early Days of 6-String Bassesā Reverb News article, Gruhnās Guide to Vintage Guitars, Tom Wheelerās American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmarkāincluding delay time, feedback, and independent rate and depth knobs for the modulationāplus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ā80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.