
Fuzz, octave, and odd intervals co-mingle and clash with bizarre, mangled, musical, pretty, and often shockingly unpredictable results.
Scores of tones that span the musical and the ridiculous. Fun and ferocious fuzz. Octave can be used independently. Often intuitive in spite of its complexity. Tracks pitch shifts without glitches
Easy to get lost in the weeds if you don’t do your homework.
$249
Keeley Octa Psi
robertkeeley.com
I’d venture that most guitarists instinctively regard fuzz as a brutish, brainless effect (which is funny given how much energy in our community is dedicated to dissecting the nuances and merits of different fuzz types). Keeley’s Octa Psi, however, transcends mere troglodyte status by combining a fundamentally nasty fuzz voice in three switchable variations, and a web of octave and interval tones that transform the Octa Psi into a synthesizer capable of textures ranging from soaring to demented to downright evil.
Crush of the Space Invader
It’s no mistake that the little figure adorning the face of the Octa Psi looks like a sinister cross between a Space Invader and a Cylon. The Octa Psi often evokes the 8-bit, synthy sounds of ’80s arcade games. But the fact that the Octa Psi’s sounds range to cartoonish extremes shouldn’t suggest to a potential user that the Octa Psi is anything less than musical. And the smart, if complex, control layout ensures you can span both extremes with ease.
The Octa Psi is effectively made up of an analog fuzz and a digital octave section. The knobs on the fuzz side are no-brainer stuff: fuzz, master level, and tone. The 3-position toggle, however, expands the potential of those three knobs exponentially. In each mode the fuzz has a cool, snorkel-y, almost filtered essence, with hints of cocked-wah snarl. The punch voice features a bass-heavy profile that’s cloaked in pea-soup fog at the extreme treble-cut/bass-boost ends of the tone control’s range, but crushes like a Tony Iommi-operated wrecking ball in the middle section. The psi mode is even thicker and doomier, though not just heavier in the bass. There’s also more midrange presence that lends extra definition and makes the fuzz feel more explosive under the fingers. The scoop setting, in very relative terms, sounds almost thin compared to the other two. But no voice is exactly short on power here, so perhaps it’s best to call it focused. Each of these modes, which already have heaps of tonal range thanks to the versatile tone knob, can be altered dramatically by the octave section.
Getting a feel for the octave options definitely takes practice. And though intuitive exploration of the possible combinations is rewarding, it’s essential that you do your homework if you want to maximize the pedal’s potential and avoid musical muddles. The Octa Psi’s complexity is largely down to the fact that it gives you much more than just a few octaves up or a few octaves down to work with. First, you can blend in the amount of octave signal. Then there are eight pitch modes available via the rotary switch. Each of these modes shifts in character, depending on whether you select the octave up, octave down, or dual octave setting with the toggle switch. But you can also reshape the tone by pressing and rotating the blend switch, which, depending on where you’ve set the other octave controls, will add octave intervals, like sharp ninths, stacked fourths, and major and minor voicings. Additionally, each of the preset modes will save your settings in dual mode—even after you unplug.
Controlled Chaos
There is another reason the video game correlation implicit in the Octa Psi logo is appropriate: At times, using it can feel like the sky above your moon base is raining laser bombs and you’re being menaced by alien aircraft from all sides. It can be really chaotic, particularly if you’re finding your way by ear rather than consulting the extensive pitch matrix in the manual. Chords are sometimes rendered into atonal glop, and, like any octave fuzz, it’s often easiest to stick with single-note lines.
But for all the mayhem Octa Psi can unleash, finding a clear musical path can be easy and feel like striking gold. Plus, the pedal is, in its way, quite forgiving. It tracks pitch changes well, and rarely collapses on itself—even when executing whole step bends colored by dissonant intervals. You can also use the octave without the fuzz, which yields conventional sounds like pretty faux-12-string, watery chorus tones, and subtle harmonies for clean leads.
The Verdict
The Octa Psi’s power and tonal vocabulary is impressive. You’ll have to be brave or have a very good memory to move between radically different settings on a dimly lit stage. And we didn’t even mention the wealth of “advanced” settings that include volume tilt, pitch ramping, effect order shifts, and more. But the bounty of smooth-to-sick sounds here means the Octa Psi could be a difference-maker in a studio or recording environment when you’re reaching for tone colors and moods that break norms. And though the Octa-Psi could, on the surface, seem nichey, it’s fun to think about the many musical styles and applications where its sounds could find a home—from doomy Sabbathoid chug, to film scores, to glitchy hip-hop hooks, to video-game sound design.
- Stomp School: What's Inside Your Pedals? ›
- DIY: How to Repair a Wet Pedal ›
- Confessions of a Pedal Nerd ›
A satin finish with serious style. Join PG contributor Tom Butwin as he dives into the PRS Standard 24 Satin—a guitar that blends classic PRS craftsmanship with modern versatility. From its D-MO pickups to its fast-playing neck, this one’s a must-see.
PRS Standard 24 Satin Electric Guitar - Satin Red Apple Metallic
Standard 24 Satin, Red App MetThe exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
This forward-thinking custom guitar commissioned by our columnist makes a special case for partnership in the guitar building community.
Owning a guitar shop, your brain is full of to-do lists, questions, and plenty of compulsive thoughts over details. And when you run a shop that specializes in custom builds that you spec out from boutique companies, the ideas for these guitars often come at the most random times of day (and night). While I don’t subscribe to the notion of fate, the following makes a case for its existence.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, I’m never shy about talking up builds from any of our vendors. Spec’ing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuff—sort of a “game recognizing game” kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Tim’s response was something like, “Oh wow! That’s really cool. Their stuff is amazing and we have a lot of respect for those guys.” At first, I thought he was just being polite, but I’ve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: “Why aren’t guitar companies like that?” “Why can’t we do a collab guitar?”
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was “Hell yeah, let’s do it!” and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortions—the first pedal I bought from Caroline in 2013—that he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that I’m not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmen—and who truly geek out over each other’s work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that I’ve clung to and has inspired me for most of my life. There is a cliché about the journey being greater than the destination, and while the destination in this case is one of the finest guitars I’ve ever laid my hands on, I’d have to say it holds true
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.
Introducing the Gibson Acoustic Specials – J-45, Hummingbird & L-00 Special - YouTube
Great Eastern FX Co. has released the limited-edition OC201 Preamp, featuring vintage Mullard OC201 transistors for a unique fuzz sound. Part of the 'Obsolete Devices' series, this pedal combines classic circuits with modern components for optimal tone and reliability.
Boutique British pedal designers GreatEastern FX Co. have released a new pedal. Limited to just 50 units, the OC201 Preamp is an intriguing twist on the familiar two-transistor fuzz circuit, built around a pair of new-old-stock Mullard OC201 transistors.
“The OC201 is a very early silicon transistor,” company founder David Greeves explains. “It was actually the first silicon transistor made by Mullard, using the same method as their germanium devices. It’s pretty crude by modern standards, with very low gain and limited bandwidth, but that’s exactly what makes it so great in a fuzz pedal.”
This little-known low-gain silicon transistor is responsible for the OC201 Preamp’s palette of sounds, which GreatEastern FX say ranges from dirty boost and garage rock drive sounds up to a raw and richly textured fuzz, all with the excellent volume knob clean-up characteristics this style of fuzz is famous for. The circuit has also been tweaked to deliver a healthy kick of volume to your amp.
This limited-edition pedal is the first in a new series that Great Eastern FX are calling ‘Obsolete Devices’. According to the company, the Obsolete Devices series will feature the company’s take on a range of classic circuits, constructed using a mixture of vintage and modern components. It’s a distinct departure from Great Eastern FX’s main range of pedals.
“With pedals like the Design-a-drive and the XO Variable Crossover, we’re really committed to developing original designs that bring something new to the table,” founder David Greeves explains. “I’m always very conscious of choosing parts that aren’t going to go obsolete so we can go on making the pedals for as long as people want to buy them. But I also love messing around with old parts and classic circuits, which is a totally different mentality. The Obsolete Devices series is basically a way for me to have fun modifying these classic circuits and experimenting with my stash of NOS components, then share the results.
“The name is a little bit of an inside joke,” he continues. “I think what gets labelled as ‘obsolete’ is very subjective. As pedal designers and guitar players, we obsess over obsolete components and what, in any other field, would be considered outdated designs. So the name is a nod to that. I also loved the thought of us coming out with some brand-new Obsolete Devices of our own!”
Alongside the pedal’s new-old-stock Mullard OC201 transistors – which are the reason only 50 of them are being made – the OC201 Preamp uses quality modern components, including high-tolerance Dale metal film resistors and WIMA capacitors. GreatEastern FX say that this hybrid approach, using vintage parts where they make the most difference sonically and low-noise modern parts elsewhere, will deliver the best combination of tone and reliability while also keeping the price from spiralling out of control.
The OC201 Preamp will cost £249 in the UK, $299 in the US and €299 in the EU. It’s available now direct from Great Eastern FX Co. and from the following dealers:
- UK – Andertons
- Europe – Pedaltown.nl
- USA – Sound Shoppe NYC
- Canada – Electric Mojo Guitars
For more information, please visit greateasternfx.com.