
Good Vibes
A hallmark of Ronson’s style is his unique vibrato, which could be so wide that at times it almost sounded more like a series of quick bends. But its quirkiness fit right in with the glam sensibility, and it always came across as musical. Ronson is possibly most well known for being a member of David Bowie’s backing band, the Spiders from Mars, and his outro solo in Bowie’s “Moonage Daydream” from the classic album Ziggy Stardust is a prime example of his unique vibrato.
Let’s look at Ex. 1, which puts the spotlight on a Ronson-style exaggerated vibrato coupled with bent notes. This can be a challenging technique, and the best way to execute it successfully is by starting with the traditional rock-style fretting-hand grip. With your fretting-hand thumb over the neck, rest the area between your thumb and index finger on the underside of the neck, creating a fulcrum point. Once you’ve bent the string, quickly rotate your wrist back and forth. Be sure not to push the string with your fingers, as this won’t provide as much strength and control as your wrist.
To fully emulate Ronson, be sure to bring swagger and confidence, like he always did. He brought a next-level intensity to Bowie’s shows, as evidenced by the following video. Witness the havoc he wreaks with his delay at 3:54.
Bending Melodies
Ronson had a particularly keen sense of melody and could create interesting melodic lines to fit over both simple and more complex chord progressions. A great example is his hypnotic guitar melody in Bowie’s “Suffragette City,” also from Ziggy Stardust.
To execute the entire melody, Ronson never once moves his fretting hand. He simply manipulates a single note by bending it varying degrees to fit over the chords. As far as technique, it’s best to use the same approach here as we did with vibrato, so as to have the most control over your bends. From a compositional standpoint, it can be helpful to be aware of the chord tones available, especially when dealing with a bit of an odd progression, like the one in Ex. 2. Here, the chord progression is: G (G–B–D), A (A–C#–E), G#m (G#–B–D#). We can think of this as IV–V–#IVm in the key of D (D–E–F#–G–A–B–C#) with the G#m chord being an odd, out-of-key choice. Looking at the chord tones, all are diatonic (in the key), with the exception of the G# and D# of the G#m chord.
Let’s take a look at two approaches to creating a melody similar to Ronson’s—one with not very much movement—over this sort of chord progression. First, when confronted with an out-of-key chord, such as our G#m, one approach is stress a note or notes which are out of key, as this can create an element of surprise. In measure three, the melody moves to D#, the fifth of G#m, which is out of key and works well here.
However, sometimes this approach can be jarring to the listener. The underlying chord is already out of key, and stressing one of the non-diatonic notes can prove to be a bit too much. In this case, a better choice is to find a note within the key which fits over the out-of-key chord. Now, this doesn’t have to be a chord tone, but here, the third of G#m (B), which is diatonic to our key of D can sound great, as demonstrated by this melody with almost no movement at all (Ex. 3). Note that for the G chord, the first note of the pair (B, the third) is a chord tone, whereas the second note (C#, the raised fourth) is not. It’s just the opposite for A chord: B is the second and C# is the third. After all, you don’t want to create cookie-cutter melodies, limiting yourself to chord tones alone. Always trust your ears and dare to try all sorts of options. But being aware of the chord tones can guide you through some tricky terrain.
Targeting the Third
In his work with Ian Hunter (Mott the Hoople), Ronson was sometimes called upon to dig into his bag of more traditional rock licks, but he always seemed to work his keen melodic sense into the mix as well. A great example is this live version of Hunter’s “Once Bitten, Twice Shy” from his 1975 self-titled debut solo album. Most rockers of the day would have leaned heavily on G minor pentatonic (G–Bb-C-D-F) over this common rock progression (C–G–D), but Ronson takes a different approach, mixing straight-up rock ’n’ roll with creative melody-making.
Ex. 4 takes a similar approach to the identical chords, starting with a classic Chuck Berry lick, then veering into more melodic territory by using the G major scale (G–A–B–C–D–E–F#). Stressing the thirds of the G and D chords (B and D, respectively) creates a sweet-sounding contrast to the more bombastic musical background.
Let’s try this “targeting thirds” approach with a different set of chords, as in Ex. 5. Here, we’re in the key of D, and over the chord progression D–F–G, we’re going to target the third of each chord — F#, A, and B, respectively. Stressing the third will often result in satisfying melodies, though doing it too much will have your listeners feeling as if they’ve eaten too much candy. Also, note how the F chord (bIII) functions as a non-diatonic bridge from the I chord (D) to the IV chord (G). Choosing to play its third (A) is another example of how stressing an in-key note over an out-of-key chord can yield smooth melodies.
Classical Gas
During his time with Bowie, Ronson could never quite be sure what musical setting he’d find himself in. “Time,” from Bowie’s 1973 release Aladdin Sane is a song with shades of Baroque music (think Bach), and in his solo, Ronson seamlessly adds lines that sound as if they could easily have been played by a classical trumpeter. First, enjoy David Bowie in his theatrically androgynous glory, as Ronson’s guitar emerges from behind his vocal. (Stay with it through the 4:00 mark!)
How does he accomplish this? He clearly draws from his classical music studies, but interestingly enough, it’s not about the notes as much as it stems from the rhythms he chooses. Ex. 6 showcases simple lines, all within the key of C (C–D–E–F–G–A–B), relying on mostly steady eighth- or 16th-note rhythms to lend a strict classical feel. As they often do, the details matter here: For example, notes with a dot above are to played staccato, or short. To accomplish this, after striking the note, quickly lift your finger so it rests on the string, thereby deadening it. Incorporating this sort of articulation and the quick 32nd-note flourish in measure one, along with rock-style vibrato and the sly bend in measure four creates a mix of modern and classical flair that Ronson could effortlessly summon.
Nothing Fancy Required
Aside from occasional use of delay, Ronson plugged his trusty 1968 Gibson Les Paul directly into various amps, most often a Marshall Major 200-watt head. Always with an eye toward detail, he had the finish stripped from his guitar, as he felt it gave the instrument more resonance. Armed with his vast musical experience and an equal ability to be subtle or unbridled, his playing remained unpredictable, as he loomed large over the glam rock scene. Let’s leave off with Ronson deftly weaving some melodic magic on the Bowie classic “Space Oddity,” of which the singer clearly approves.
A live editor and browser for customizing Tone Models and presets.
IK Multimedia is pleased to release the TONEX Editor, a free update for TONEX Pedal and TONEX ONE users, available today through the IK Product Manager. This standalone application organizes the hardware library and enables real-time edits to Tone Models and presets with a connected TONEX pedal.
You can access your complete TONEX library, including Tone Models, presets and ToneNET, quickly load favorites to audition, and save to a designated hardware slot on IK hardware pedals. This easy-to-use application simplifies workflow, providing a streamlined experience for preparing TONEX pedals for the stage.
Fine-tune and organize your pedal presets in real time for playing live. Fully compatible with all your previous TONEX library settings and presets. Complete control over all pedal preset parameters, including Global setups. Access all Tone Models/IRs in the hardware memory, computer library, and ToneNET Export/Import entire libraries at once to back up and prepare for gigs Redesigned GUI with adaptive resize saves time and screen space Instantly audition any computer Tone Model or preset through the pedal.
Studio to Stage
Edit any onboard Tone Model or preset while hearing changes instantly through the pedal. Save new settings directly to the pedal, including global setup and performance modes (TONEX ONE), making it easy to fine-tune and customize your sound. The updated editor features a new floating window design for better screen organization and seamless browsing of Tone Models, amps, cabs, custom IRs and VIR. You can directly access Tone Models and IRs stored in the hardware memory and computer library, streamlining workflow.
A straightforward drop-down menu provides quick access to hardware-stored Tone Models conveniently sorted by type and character. Additionally, the editor offers complete control over all key parameters, including FX, Tone Model Amps, Tone Model Cabs/IR/VIR, and tempo and global setup options, delivering comprehensive, real-time control over all settings.
A Seamless Ecosystem of Tones
TONEX Editor automatically syncs with the entire TONEX user library within the Librarian tab. It provides quick access to all Tone Models, presets and ToneNET, with advanced filtering and folder organization for easy navigation. At the same time, a dedicated auto-load button lets you preview any Tone Model or preset in a designated hardware slot before committing changes.This streamlined workflow ensures quick edits, precise adjustments and the ultimate flexibility in sculpting your tone.
Get Started Today
TONEX Editor is included with TONEX 1.9.0, which was released today. Download or update the TONEX Mac/PC software from the IK Product Manager to install it. Then, launch TONEX Editor from your applications folder or Explorer.
For more information and videos about TONEX Editor, TONEX Pedal, TONEX ONE, and TONEX Cab, visit:
www.ikmultimedia.com/tonexeditor
The luthier’s stash.
There is more to a guitar than just the details.
A guitar is not simply a collection of wood, wire, and metal—it is an act of faith. Faith that a slab of lumber can be coaxed to sing, and that magnets and copper wire can capture something as expansive as human emotion. While it’s comforting to think that tone can be calculated like a tax return, the truth is far messier. A guitar is a living argument between its components—an uneasy alliance of materials and craftsmanship. When it works, it’s glorious.
The Uncooperative Nature of Wood
For me it all starts with the wood. Not just the species, but the piece. Despite what spec sheets and tonewood debates would have you believe, no two boards are the same. One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.
Builders know this, which is why you’ll occasionally catch one tapping on a rough blank, head cocked like a bird listening. They’re not crazy. They’re hunting for a lively, responsive quality that makes the wood feel awake in your hands. But wood is less than half the battle. So many guitarists make the mistake of buying the lumber instead of the luthier.
Pickups: Magnetic Hopes and Dreams
The engine of the guitar, pickups are the part that allegedly defines the electric guitar’s voice. Sure, swapping pickups will alter the tonality, to use a color metaphor, but they can only translate what’s already there, and there’s little percentage in trying to wake the dead. Yet, pickups do matter. A PAF-style might offer more harmonic complexity, or an overwound single-coil may bring some extra snarl, but here’s the thing: Two pickups made to the same specs can still sound different. The wire tension, the winding pattern, or even the temperature on the assembly line that day all add tiny variables that the spec sheet doesn’t mention. Don’t even get me started about the unrepeatability of “hand-scatter winding,” unless you’re a compulsive gambler.
“One piece of ash might have a bright, airy ring, while another from the same tree might sound like it spent a hard winter in a muddy ditch.”
Wires, Caps, and Wishful Thinking
Inside the control cavity, the pots and capacitors await, quietly shaping your tone whether you notice them or not. A potentiometer swap can make your volume taper feel like an on/off switch or smooth as an aged Tennessee whiskey. A capacitor change can make or break the tone control’s usefulness. It’s subtle, but noticeable. The kind of detail that sends people down the rabbit hole of swapping $3 capacitors for $50 “vintage-spec” caps, just to see if they can “feel” the mojo of the 1950s.
Hardware: The Unsung Saboteur
Bridges, nuts, tuners, and tailpieces are occasionally credited for their sonic contributions, but they’re quietly running the show. A steel block reflects and resonates differently than a die-cast zinc or aluminum bridge. Sloppy threads on bridge studs can weigh in, just as plate-style bridges can couple firmly to the body. Tuning machines can influence not just tuning stability, but their weight can alter the way the headstock itself vibrates.
It’s All Connected
Then there’s the neck joint—the place where sustain goes to die. A tight neck pocket allows the energy to transfer efficiently. A sloppy fit? Some credit it for creating the infamous cluck and twang of Fender guitars, so pick your poison. One of the most important specs is scale length. A longer scale not only creates more string tension, it also requires the frets to be further apart. This changes the feel and the sound. A shorter scale seems to diminish bright overtones, accentuating the lows and mids. Scale length has a definite effect on where the neck joins the body and the position of the bridge, where compromises must be made in a guitar’s overall design. There are so many choices, and just as many opportunities to miss the mark. It’s like driving without a map unless you’ve been there before.
Alchemy, Not Arithmetic
At the end of the day, a guitar’s greatness doesn’t come from its spec sheet. It’s not about the wood species or the coil-wire gauge. It’s about how it all conspires to either soar or sink. Two guitars, built to identical specs, can feel like long-lost soulmates or total strangers. All of these factors are why mix-and-match mods are a long game that can eventually pay off. But that’s the mystery of it. You can’t build magic from a parts list. You can’t buy mojo by the pound. A guitar is more than the sum of its parts—it’s a sometimes unpredictable collaboration of materials, choices, and human touch. And sometimes, whether in the hands of an experienced builder or a dedicated tinkerer, it just works.
MT 15 and Archon 50 Classic amplifiers offer fresh tones in release alongside a doubled-in-size Archon cabinet
PRS Guitars today released the updated MT 15 and the new Archon Classic amplifiers, along with a larger Archon speaker cabinet. The 15-watt, two-channel Mark Tremonti signature amp MT 15 now features a lead channel overdrive control. An addition to the Archon series, not a replacement, the 50-watt Classic offers a fresh voice by producing retro rock “classic” tones reminiscent of sound permeating the radio four and five decades ago. Now twice the size of the first Archon cabinet, the Archon 4x12 boasts four Celestion V-Type speakers.
MT 15 Amplifier Head
Balancing aggression and articulation, this 15-watt amp supplies both heavy rhythms and clear lead tones. The MT 15 revision builds off the design of the MT 100, bringing the voice of the 100’s overdrive channel into its smaller-format sibling. Updating the model, the lead channel also features a push/pull overdrive control that removes two gain stages to produce vintage, crunchier “mid gain” tones. The clean channel still features a push/pull boost control that adds a touch of overdrive crunch. A half-power switch takes the MT to 7 watts.
“Seven years ago, we released my signature MT 15 amplifier, a compact powerhouse that quickly became a go-to for players seeking both pristine cleans and crushing high-gain tones. In 2023, we took things even further with the MT 100, delivering a full-scale amplifier that carried my signature sound to the next level. That inspired us to find a way to fit the 100's third channel into the 15's lunchbox size,” said Mark Tremonti.
“Today, I’m beyond excited to introduce the next evolution of the MT15, now featuring a push/pull overdrive control on the Lead channel and a half-power switch, giving players even more tonal flexibility to shape their sound with a compact amp. Can’t wait for you all to plug in and experience it!”
Archon Classic Amplifier Head
With a refined gain structure from the original Archon, the Archon Classic’s lead channel offers a wider range of tones colored with gain, especially in the midrange. The clean channel goes from pristine all the way to the edge of breakup. This additional Archon version was developed to be a go-to tool for playing classic rock or pushing the envelope into modern territory. The Archon Classic still features the original’s bright switch, presence and depth controls. PRS continues to stock the Archon in retailers worldwide.
“The Archon Classic is not a re-issue of the original Archon, but a newly voiced circuit with the lead channel excelling in '70s and '80s rock tones and a hotter clean channel able to go into breakup. This is the answer for those wanting an Archon with a hotrod vintage lead channel gain structure without changing preamp tube types, and a juiced- up clean channel without having to use a boost pedal, all wrapped up in a retro-inspired cabinet design,” said PRS Amp Designer Doug Sewell.
Archon 4x12 Cabinet
As in the Archon 1x12 and 2x12, the mega-sized PRS Archon 4x12 speaker cabinet features Celestion V-Type speakers and a closed-back design, delivering power, punch, and tight low end. Also like its smaller brethren, the 4x12 is wrapped in durable black vinyl and adorned with a British-style black knitted-weave grill cloth. The Archon 4x12 is only the second four-speaker cabinet in the PRS lineup, next to the HDRX 4x12.
PRS Guitars continues its schedule of launching new products each month in 2025. Stay tuned to see new gear and 40 th Anniversary limited-edition guitars throughout the year. For all of the latest news, click www.prsguitars.com/40 and follow @prsguitars on Instagram, Tik Tok, Facebook, X, and YouTube.
The Austin-based guitarist sticks with a tried-and-true combo of American guitars and British amps.
If you’ve been on the path of this spring’s Rhett Schull/Zach Person tour, you’ve been treated to one of the coolest rock ’n’ roll double bills criss-crossing North America this year. Person, who is based in Austin, put out his second full-length record, Let’s Get Loud, in March 2024, and it was packed with alt-, blues-, and psychedelic-rock anthems built around his take-no-prisoners playing.
This year, Person is road-doggin’ it around the United States as a two-piece unit with just a drummer, and PG’s Chris Kies caught up with him before he and Shull played the Eastside Bowl in Madison, Tennessee, to see what goods Person is bringing for this spring’s shows.
Brought to you by D’Addario
Customized Custom
This Gibson Jimi Hendrix 1967 Custom SG came from Gibson’s custom shop, and for Person, an SG with humbuckers is a hard combination to beat. He removed the Maestro trem system and had a tailpiece installed for tuning stability on the road, and he subjected the neck humbucker to a “Jimmy Page mod,” which entails removing the pole pieces to get closer to single-coil tones. This SG stays in standard tuning, with Ernie Ball or D’Addario strings (usually .010–.046s). Person digs Dunlop Flow Grip .88 mm picks.
Brown Sound
Person brought this 1967 Gibson SG Special back to life with a list of modifications and upgrades, including new pickups and a refinish, but its wood, neck shape, and original frets all made it worth it to him. The neck shape is narrow but chunky in Person’s hands, landing somewhere near the feel of Tyler Bryant’s 1962 Stratocaster. The pickups now are OX4 P-90s, and like the Custom, this one’s had its Maestro system amputated.
Jeannie Comes Alive
One Thanksgiving at his in-laws’ home in Dallas, Person mentioned how badly he wanted a Gibson LG-2 acoustic. As it happened, his father-in-law suspected his mother had one, which had been relegated to storage in a shed. Person and his wife’s father ventured through rain to dig it out, and sure enough, a very beat up LG-1 was withering away in its case. No local techs in Austin thought it was worth saving, except for Elaine Filion, who was used to taking on bigger restoration projects. Filion succeeded, taking the top off and installing an X-bracing system to turn the LG-1 into an LG-2-style guitar. Now, it’s got an L.R. Baggs pickup and bears the nameplate “Jeannie” on its headstock to commemorate his wife’s grandma, the original owner. Jeannie usually stays home, but Person brought her out specially for the Rundown.
Marshall Muscle
This Marshall JTM45 MkII is Person’s usual go-to. It runs just at breakup volume and gets pushed with some variation of a Pro Co RAT, his favorite dirt box.
Supro Signature
This Super Black Magick Reverb, Tyler Bryant’s signature, is along for the ride as a backup to the Marshall.
Zach Person’s Pedalboard
Person has done tours with just an overdrive pedal and nothing else, so by comparison, this two-tiered Vertex board is luxurious. Still, it’s compact and carries all he needs at the moment. The JHS Pack Rat is the core sound, set fairly heavy and dirty. The rest includes a Boss TU-3, EarthQuaker Devices Double Hoof, Vox Clyde McCoy wah, Boss BF-2, DigiTech Drop, Strymon El Capistan, and an Interstellar Audio Machines Marsling Octafuzzdrive. A TC Helicon Mic Mechanic rides along as a vocal effect so Person can keep control over his voice from night to night.