
The 1976-issued Schaffer–Vega Diversity SVDS Model X-10 Transmitter & 63EX Receiver system was discontinued in 1981, but a reproduction is now available.
Wireless technology is thriving in all parts of the techno-sphere and it's time for bassists to catch up.
What were the most dangerous times for bassists, guitarists, and singers? Surely the '60s. Not because of wild backstage parties, drug abuse, or high-risk early international travel, but simply because of electrocution caused by amateurish electrical installations with missing grounds.
That's exactly what inspired Leo Fender to develop the TR-105, the first "Wireless Remote Unit," as they called it, back in 1961. Unlike the P-bass, this was really a world's first, but unfortunately a rather unsuccessful one. The unit was directed at guitarists, bassists, and accordionists, and had a radius of 50 feet—enough distance for those pre-arena stage dimensions. It looked surprisingly similar to modern units: a set-top box and a belt pack. Its transmitter, which weighed only 5 ounces, had an impressive frequency range of 20 Hz–75 kHz, while the receiver covered 20 Hz–20 kHz, with 100 to 150 hours of operation on one mercury battery. The system came with a hardcase, weighed 15 pounds, and cost $269.50—roughly $2,500 today. For whatever reason, it didn't catch on and Fender only offered it for around a year.
It wasn't until 1976 that Nasty Cordless, Inc. (later renamed Nady Systems) and Ken Schaeffer's Vega Diversity successfully entered a broader market. Both were analog devices and used a process called companding: a word-mix of compression at the sender side and expansion on the receiver side.
The specialty of the Vega was an integrated audio circuit that was known to colorize tone. This doesn't have to be a bad thing, as AC/DC's Angus Young is still using his today, even in the studio, and sees it as a central device for his signature sound. (See PG's AC/DC Rig Rundown from September 2016.) These systems also had greater operation ranges, so they were good for stadium stages.
Today, wireless technology is thriving in all aspects of electronic products, with cables nearly a thing of the past, except among—astonishingly—many musicians who still like to knot and tangle them.
Wireless systems got a bad reputation because of their early teething troubles, which included dropouts and problems picking up radio transmissions. Some guitarists really look down on them because of these initial foibles. Today's budget analog wireless systems can have companders with a fixed ratio, and this can make them sound unnatural. Better ones have more natural sounding companders that make it much harder to tell the difference between wired and wireless sounds. And the newer digital systems are even topping these, with their high-quality A/D converters.
In the foreground of today's discussions about wireless systems are most often things like tone, dynamics, range, energy consumption, bandwidth, and dropouts, while electrocution isn't that much of an issue. Although it should be for anyone touring exotic places with lesser-controlled electrical environments.
Today, wireless technology is thriving in all aspects of electronic products, with cables nearly a thing of the past, except among—astonishingly—many musicians who still like to knot and tangle them. As with all things mechanical, cable breakage isn't such a rarity and one might even be tempted to say that newer wireless devices excel in reliability. And—opposed to many early transmitters—they've switched to USB-equipped accumulators and far lower energy consumption. Choosing a system is almost a no-brainer, even though the sheer number of models is vast. With the exception of low-end budget models, almost all units fulfill the criteria of reliability, tone, ease of use, and operational range.
Fender was first in the wireless game with its unsuccessful TR-105 in 1961.
For us bassists, there are a few extra points to keep in mind. Our signal is pretty dynamic, so our wireless system should be as well. Analog wireless systems need to compress the dynamic range of the audio before it can be carried on a radio wave. Not only can this have an impact on tone; it also limits dynamics. Therefore, digital is the way to go, especially since these have a better low-end range.
All those owning basses with active pickups or preamps should check compatibility before buying, plus keep a few other things in mind. It's sometimes not mentioned in a system's spec lists whether it will work with an active instrument's stereo output jacks, due to a TRS-related connection issue that can occur. Output levels of active pickups can be another issue, which is why many devices come with a gain-adjustment at the transmitter. And finally, there can be whining and noise caused by insufficient shielding of the preamp on your bass, once the transmitter is plugged in and close to the electronics housing. To solve that, just look for a cable-equipped belt pack to keep the receiver's antennas farther away from it.
Some other common features to look for are capacity-load cable simulations, which are more directed at guitarists, and durable metal body packs, for the touring artist. Multiple transmitter supports could be nice to have, but are not essential.
Some research will help you find the right system. Don't be afraid to cut the cable! You might enjoy your new freedom to roam the stage.
- Tone Tips: Going Wireless in 2018 - Premier Guitar ›
- Boss Introduces the Waza-Air Wireless Personal Guitar Amplification ... ›
- Tools for the Task: Wireless Guitar Systems - Premier Guitar ›
A reverb-based pedal for exploring the far reaches of sound.
Easy to use control set. Wide range of sounds. Crush control is fun to explore. Filter is versatile.
Works best as a stereo effect, which may limit some players.
$299
Old Blood Noise Endeavors Dark Star Stereo
oldbloodnoise.com
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
The Old Blood Dark Star Stereo (DSS) is one of those pedals that lives beyond simple effect categorization. Yes, it’s a digital reverb. But like other Old Blood designs, it’s such a feature-rich, creative take on that effect that to think of it as a reverb feels not only imprecise but unfair.
In this case, reverb describes how the DSS works more than how it sounds. I’ve come to think of this pedal as a reverb-based synthesizer, where reverb is the jumping-off point for sonic creation. As such, the sounds coming out of the Dark Star can be used as subtle sweetener or sound design textures, opening up worlds that might otherwise be unreachable.
Reverb and Beyond
Functionally speaking, the DSS starts with reverb and applies a high-/low-pass filter, two pitch shifters, each with a two-octave range in each direction, plus bit-crushing and distortion. Controls for lag (pre-delay), multiply (feedback), and decay follow, with mini knobs for volume, mix, and spread. Additional control features include presets, MIDI functionality, plus expression and aux control.
The DSS can be routed in mono, stereo, or mono-in/stereo-out. Both jacks are single TRS, and it’s easy to switch between settings by holding down the bypass switch and selecting via the preset button.
Although it sounds great in mono, stereo is where this iteration of the Dark Star—which follows the mono Dark Star and Dark Star V2—really comes alive. Starting with the filter, both pitch shifters, and crush knobs at noon—all have center detents—affords the most neutral settings. The result is a pad reverb, as synthetic as but less sparkly than a shimmer. The filter control is a fine way to distinguish clean and effect signals. In low-pass mode, the effect signal can easily get dark and spooky while maintaining fidelity and without getting murky. On the other end, high-pass settings are handy for refining those reverb pads and keeping them from washing out the clarity of the clean signal.
Lower fidelity is close at hand when you want it. The crush control, when turned counterclockwise, reduces the bit rate of the effect signal, evoking all kinds of digitally compromised sounds, from early samplers to cell phones, depending on how you flavor it. Counterclockwise applies distortion to the reverb signal. There’s a lot to explore within the wide ranges of the two pitch controls, too. With a four-octave range, quantized in half steps, the combinations can be extreme, and Dark Star takes on a life of its own.
Formless Reflections of Matter
The DSS is easy to get acquainted with, especially for a pedal with so many features, 10 knobs, and two footswitches. I quickly got a feel for the reverb itself at the most neutral filter and pitch settings, where I enjoyed the weight a responsive, textural pad lent to everything I played.
With just the filter and crush controls, there’s plenty to explore. Sitting in the sweet spot between a pair of vintage Fenders, I conjured a Twin Peaks-inspired hazy fog to accompany honeyed diatonic arpeggios, slowly filtering and crushing that sound into a dark, evil low-end whir as chords leaned toward dissonance. Eventually, I cranked the high-pass filter, producing an early MP3-in-a-good-way “shhh” that was fine accompaniment to sparser voicings along my fretboard. It was a true sonic journeyThe pitch controls increase possibilities for both ambience and dissonance. Simple tweaks push the boundaries of possibility in exponentially deeper directions. For more subtle thickening and accompaniment sounds, adding octaves, which are easy to tune by ear, offers precise tone sculpting, dimension, and a wider frequency range. Hearing simple harmonic ideas plucked against celeste- and organ-like reverberations kept me in the Harold Budd and Brian Eno space for long enough to consider new recording projects.
There is as much fun to be had at the highest feedback settings on the DSS. Be forewarned: Spend too much time there and you might need a name for your new ambient band. Cranking the multiply and decay knobs, I’d drop in a few notes, or maybe just a chord, and get to work scanning the pitch knobs and sculpting with the filter. Soon, I conjured bold Ligeti-inspired orchestral sounds fit for a guitar remix of 2001: A Space Odyssey.
The Verdict
The Dark Star Stereo strikes a nice balance between deep control, a wide range of sonic rewards, playability, and an always-sounds-great vibe. The controls are easy to use, so it doesn’t take long to get in the zone, and once you do, there’s plenty to explore. Throughout my time with the DSS, I was impressed with its high-fidelity clarity. I attribute that to the filter, which allows clean and reverb signals to perform dry/wet balance and EQ functions. That alone encouraged more adventurous and creative exploration. Though not every player needs this kind of tone tool, the DSS is a must-check-out effect for anyone serious about wild reverb adventures, and it’s simple and intuitive enough to be a good fit for anyone just starting exploration of those zones. However you come to the Dark Star, it’s a unique-sounding pedal that deserves attention. PG
The exquisite BilT Brothers collaborative guitar: a Frank Brothers Ultra Light in BilT eggplant sparkleburst with Arcane 3x3 Gold Foil Humbuckers and loaded with a Caroline Custom Cannonball Distortion.
This forward-thinking custom guitar commissioned by our columnist makes a special case for partnership in the guitar building community.
Owning a guitar shop, your brain is full of to-do lists, questions, and plenty of compulsive thoughts over details. And when you run a shop that specializes in custom builds that you spec out from boutique companies, the ideas for these guitars often come at the most random times of day (and night). While I don’t subscribe to the notion of fate, the following makes a case for its existence.
It was like any other random day at work: We had customers coming in, items shipping out, services on the bench. I was simultaneously working on a pedalboard for a customer and making plans with some vendors. I was on the phone with Brandon Darner of BilT Guitars when DHL dropped off our latest Frank Brothers guitar. Now, I’m never shy about talking up builds from any of our vendors. Spec’ing guitars for our shop, seeing their execution exceed my expectations, and then getting it into the hands of its new owner is one of my absolute favorite parts of my job. So, naturally I mentioned that we just got a new Frank Brothers in. Brandon told me how much he loved their stuff—sort of a “game recognizing game” kind of thing.
After we unboxed the guitar, I called Tim Frank to let him know how we continue to be impressed with their work and how much we loved the new arrival. I also mentioned Brandon had some very nice things to say about their work. Tim’s response was something like, “Oh wow! That’s really cool. Their stuff is amazing and we have a lot of respect for those guys.” At first, I thought he was just being polite, but I’ve gotten to know him pretty well. I knew that the compliment and sentiment was genuine and past the point of his wonderful Canadian pleasantness. One thing led to another, and I started a group text. Very quickly, they became friends. In fact, Brandon even ordered a Frank Brothers shortly after the introduction.
The Frank Brothers and BilT team, left to right: Tim Frank, Tim Thelen (BilT), Nick Frank, and Brandon Darner (BilT).
My last call of the day was to Philippe Herndon from Caroline Guitar Company. As we talked, he was glowing about the pedal building community and how friendly and collaborative it is, and obvious questions popped into my head: “Why aren’t guitar companies like that?” “Why can’t we do a collab guitar?”
Long story extremely short, with tons of excitement, I got Brandon and Tim on the phone and proposed the idea of doing a guitar together. Without hesitation, the response from both was “Hell yeah, let’s do it!” and it was time for us to spec it. We decided on a Frank Brothers Ultra Light. BilT would apply their world-class fit/finish as well as their signature effects treatment. I picked my favorite finish in the BilT repertoire called eggplant sparkleburst, selected Arcane 3x3 Gold Foil Humbuckers, and tapped Philippe on the shoulder to ask if he had any Custom Cannonball Distortions—the first pedal I bought from Caroline in 2013—that he could provide for the build, to which he happily obliged.
A year or so later, the BilT Brothers was born. Of course, it is exceptional beyond words and is a true testament to the results of these incredible companies working together to produce something truly remarkable. We decided, with custom shirts and all, to proudly debut our creation at Fretboard Summit in Chicago. The reaction from everyone exceeded our expectations and showed me that the level of mutual respect and admiration in this business can lead to phenomenal results.
This project has opened a lot of doors that I’m not sure anyone knew existed. For me, the most exciting part of all of this is the fact that, like the smaller pedal companies, there is an actual community here filled with like-minded, pure enthusiasts who also happen to be master craftsmen—and who truly geek out over each other’s work.
Never was this more evident than at the Wood Wire Volts show this January, where not only did the BilT and Frank Brothers crews travel and stay together, they were also often in deep chats with fellow luminaries Sacha Dunable (Dunable Guitars) and Carlos Lopez (Castedosa Guitars), discussing the trade, the work, and ideas for the future. If the vibe is any indicator, we can safely assume that while the BilT Brothers was, by all accounts, the first ever collab guitar of its kind, it will not be the last.
This entire experience is reminiscent of the DIY community ethos that I’ve clung to and has inspired me for most of my life. There is a cliché about the journey being greater than the destination, and while the destination in this case is one of the finest guitars I’ve ever laid my hands on, I’d have to say it holds true
Introducing the new Gibson Acoustic Special models, handcrafted in Bozeman, Montana, featuring solid wood construction, satin nitrocellulose lacquer finishes, and L.R. Baggs electronics.
Solid Wood Construction
Each of the three Acoustic Special models from Gibson are crafted using solid mahogany for the back and sides, solid Sitka spruce for the tops, utile for the necks, and rosewood for the fretboards for a sound that will only get better and better as they age.
Satin Nitrocellulose Lacquer Finishes
All three Gibson Acoustic Special models are finished in satin nitrocellulose lacquer for a finish that breathes, ages gracefully, and lets the natural beauty–both in sound and appearance–of the quality tonewoods come through.
L.R. Baggs Electronics
The Gibson Acoustic Special guitars come with L.R. Baggs Element Bronze under-saddle piezo pickups and active preamps pre-installed, making them stage and studio-ready from the moment you pick them up.
For more information, please visit gibson.com.
Introducing the Gibson Acoustic Specials – J-45, Hummingbird & L-00 Special - YouTube
Great Eastern FX Co. has released the limited-edition OC201 Preamp, featuring vintage Mullard OC201 transistors for a unique fuzz sound. Part of the 'Obsolete Devices' series, this pedal combines classic circuits with modern components for optimal tone and reliability.
Boutique British pedal designers GreatEastern FX Co. have released a new pedal. Limited to just 50 units, the OC201 Preamp is an intriguing twist on the familiar two-transistor fuzz circuit, built around a pair of new-old-stock Mullard OC201 transistors.
“The OC201 is a very early silicon transistor,” company founder David Greeves explains. “It was actually the first silicon transistor made by Mullard, using the same method as their germanium devices. It’s pretty crude by modern standards, with very low gain and limited bandwidth, but that’s exactly what makes it so great in a fuzz pedal.”
This little-known low-gain silicon transistor is responsible for the OC201 Preamp’s palette of sounds, which GreatEastern FX say ranges from dirty boost and garage rock drive sounds up to a raw and richly textured fuzz, all with the excellent volume knob clean-up characteristics this style of fuzz is famous for. The circuit has also been tweaked to deliver a healthy kick of volume to your amp.
This limited-edition pedal is the first in a new series that Great Eastern FX are calling ‘Obsolete Devices’. According to the company, the Obsolete Devices series will feature the company’s take on a range of classic circuits, constructed using a mixture of vintage and modern components. It’s a distinct departure from Great Eastern FX’s main range of pedals.
“With pedals like the Design-a-drive and the XO Variable Crossover, we’re really committed to developing original designs that bring something new to the table,” founder David Greeves explains. “I’m always very conscious of choosing parts that aren’t going to go obsolete so we can go on making the pedals for as long as people want to buy them. But I also love messing around with old parts and classic circuits, which is a totally different mentality. The Obsolete Devices series is basically a way for me to have fun modifying these classic circuits and experimenting with my stash of NOS components, then share the results.
“The name is a little bit of an inside joke,” he continues. “I think what gets labelled as ‘obsolete’ is very subjective. As pedal designers and guitar players, we obsess over obsolete components and what, in any other field, would be considered outdated designs. So the name is a nod to that. I also loved the thought of us coming out with some brand-new Obsolete Devices of our own!”
Alongside the pedal’s new-old-stock Mullard OC201 transistors – which are the reason only 50 of them are being made – the OC201 Preamp uses quality modern components, including high-tolerance Dale metal film resistors and WIMA capacitors. GreatEastern FX say that this hybrid approach, using vintage parts where they make the most difference sonically and low-noise modern parts elsewhere, will deliver the best combination of tone and reliability while also keeping the price from spiralling out of control.
The OC201 Preamp will cost £249 in the UK, $299 in the US and €299 in the EU. It’s available now direct from Great Eastern FX Co. and from the following dealers:
- UK – Andertons
- Europe – Pedaltown.nl
- USA – Sound Shoppe NYC
- Canada – Electric Mojo Guitars
For more information, please visit greateasternfx.com.