Stoner metal, desert rock, trippy psychedelia, and swampy blues swirl with just three guitars, a bastardized Rick, and custom-built, beastly stacks.
Expanding, evolving, exploring, and enchanting are all applicable when describing the orbit of All Them Witches. Since their 2016 Rig Rundown, the quartet have continued pursuing their sonic mission, unbound by anything but regeneration. Their never-ending musical mutation has yielded three more individualistic, intrepid releases since our last check-in.
Sleeping Through the War, in 2017, explored more purposeful, mystical songcraft cloaked in hypnotic, rambunctious rock. For 2018’s ATW, the band’s IV-like retreat (substitute Headley Grange for a Tennessee cabin) extracted a doomier, more chaotic side A equally matched by a side B that’s a psychedelic painkiller. And 2020’s Nothing as the Ideal shows the temporary power trio (drummer Robby Staebler completes the line-up) striking a levitating balance within a menacing, mortar of metal that binds and anchors their emotive, effervescent excursions. (Drop the needle on closer “Rats in Ruin” and let it wash over you.)
Just before their sold-out show at Nashville’s historic Ryman Auditorium (on Halloween, no less), Witches guitarist Ben McLeod and bassist/vocalist Charles Michael Parks Jr. welcomed PG’s Chris Kies onstage to re-chronicle their setups. The resulting conversation covers their modified war horses, deciphers their esoteric stacks, and reveals the secrets of the “doom broom.” Plus, we get hip to new builder Elad Shapiro of Dale Amps.
[Brought to you by D’Addario 360 Rechargeable Tuner: https://www.daddario.com/NexxusRR]
McLeod’s Monster
Starting off the Rundown, just like the 2016 episode, we have Ben’s beloved 2010 Gibson Les Paul Traditional. He’s done several mods to make this instrument a third appendage. McLeod had removed the stock speed knobs, opting for witch-hats (of course). However, he’s a big proponent of precise volume manipulation, so he put back the speed knobs for the two volume controls. He replaced the plastic nut with one made of bone. He says it not only helps with intonation but gives the guitar a silkier, smoother sound. The stock bridge Classic ’57 humbucker was swapped out for a DiMarzio Super Distortion. And, although it was mentioned last time, it’s worth noting that the pickguard was removed because McLeod is a big fan of Duane Allman and he didn’t feel like covering the full burst.
All the guitars take D'Addario NYXLs (.010–.046) and are typically tuned to D standard or drop C (C-G-C-F-A-D). And all his guitar maintenance is handled by Eastside Music Supply tech and PG contributor Derek Ness, who authored our 2019 edition of No-Brainer Mods.
Knaggs Nailed It
When a custom builder like Joe Knaggs comes calling as a fan, you answer. The Maryland-based luthier wanted to send McLeod a few guitars and the 6-stringing Witch said, “absolutely!” The SG-ish Honga is his favorite. “This guitar has an ungodly amount of midrange, and it is so awesome,” gushes McLeod. “It’s an amazingly, well-built guitar.” The set-neck, double-cutaway axe has a 24.75" scale length and came with Bare Knuckle Mules. The lone mod on this guitar (again done by Derek Ness) was swapping the pickup selector from below (near the control knobs) to up top, like Les Pauls.
Roy Marks the Spot
“I’m obsessed with Roy Buchanan,” admits McLeod. “So, I had to have a guitar that looked like his, with a butterscotch blonde finish and black pickguard.” This bombshell is a Fender American Vintage ’52 Telecaster. Ben reversed the control plate and put the volume knob ahead of the tone control, so he had easier access to the volume knob for county-ish, pedal-steel bends. He also dropped in a set of Fralin Blues Special Tele single-coils because he heard that his current favorite picker, Kenny Vaughan, loves them. For ATW, it’s primarily a safety net, but when he’s home he plays this T the most. (And for a taste of how it sounds, spin Ben’s surf-western side project El Castillo.)
Slippery Slides
For songs like “Rats in Ruin,” McLeod will grab a Dunlop Heavy Wall Large Glass Slide (213), and he attacks the strings with Dunlop Tortex .73 mm picks.
Fourth-Grade Fender
This is still the same Fender Twin Reverb reissue Ben was using in 2016, which he’s been blasting through since fourth grade, when he got it for Christmas. He’s had it outfitted with a master volume knob (far right control) so he can dial back its roar at home. (He leaves it wide open when onstage.) Another alteration was removing the pair of Jensens for a couple of alnico Warehouse Guitar Speakers 50W Blackhawks.
The Gain Monster
This mysterious box of rock is a very angry interpretation of a 50W JCM800. Built by Nashvillian Elad Shapiro (Dale Amps is the company), it features a Hiwatt output transformer and Mullard EL34s. A 2x12 open-back Dale cab is loaded with a set of Warehouse Guitar Speakers ET65s. In flight, he uses either the Twin Reverb (clean) or the Dale (heavy). (During the Rundown, Ben alludes to a forthcoming 100W version that will be used on their winter run and into 2022.)
For those who can’t read Hebrew, the controls are as follows: (top, from left) preamp gain, master volume, and presence, while below you have treble, mids, and bass.
Lucky for us, we had the amp builder himself on hand, and here’s what he said about his creation: “It’s a 4-stage, high-gain amplifier with three EL34s in the output, three 12AX7s in the preamp, and it has a Hiwatt Partridge output transformer. I like to use them because they’re very open and chime-y sounding. The biggest difference between this and a JCM800 is that it doesn’t have a cold-clipper stage—how the tube is biased causes it to do something unpleasing to my ear. And it cleans up real nice when you ease off the volume.”
6-pack and a Wah
As diverse as the band’s sound can be, Ben keeps his stomps relatively straightforward. His sweet baby Boss BD-2 Blues Driver still finds a home on his board. The rest of his colors come from fresh friends: a duo each of Electro-Harmonix (Holy Grail and Deluxe Memory Man 1100-TT) and MXR (Carbon Copy and Phaser 90) boxes, and a Stomp Under Foot La Scatola Nera. This pedal was a result of a request from Ben to SUF’s Matthew Pasquerella “to have a new and different fuzz from his Alabaster pedal, and add an octave.” Off to the right he has a Dunlop Cry Baby 95Q wah that replaced his Vox V847 Wah because he prefers its wide sweep and not having to engage the circuit, thanks to its auto-return switching. The Radial BigShot ABY True Bypass Switcher controls the amps, while the TC Electronic PolyTune 3 Mini keeps his guitars in check.
In our last Rundown, we picked our jaw off the floor and left scratching our head when first encountering bassist Charles Michael Parks, Jr. amputated 1972 Rickenbacker (left). At that time, he used the bewildering 4001 most of the night. The only sub happened when going for his 1966 Rickenbacker 450/12 for Dying Surfer Meets His Maker songs Call Me a Star” and “Talisman.” As the story went, the guy he bought it from was left-handed, and he chopped off the upper bout, slashed off some of the headstock, and flipped it around to play lefty. Parks got the bass super cheap, had set it up to play right-handed, reworked the electronics, shaved the bridge and moved it back, and then outfitted it for a proper stereo jack. It usually has D’Addario Half Round (.050–.105) strings. And, as Parks puts it, “it’s a battle axe. If being dragged behind a truck had a sound, it’d be this.”
Since then, he had budding luthier and tech whiz Derek Ness build him a more dependable, road-worthy replica of the oddball (right). Besides the original’s brighter toaster pickups and its frayed look, the biggest difference is that the Ness Custom model has a Hipshot BT3 Bass Xtender detuner.
Daddy Played Bass
This 1962 Fender P bass was bought by Parks’ father in 1965 and was recently gifted to him. His father’s friends were sound engineers and, like the P’s designer, didn’t play the instrument, but they heavily tinkered with its circuitry by putting in a Jazz bass pickup and additional switching. Shortly after purchasing the P, his father smashed the switches and gave it a bizarrely beautiful sound.
The Groove
From all the years of playing it, Parks’ father worked a serious thumbprint just above the J pickup.
SG Me to 69, Please
A week after Woodstock (possibly after seeing Carlos Santana rip on an SG Special), Parks’ father picked up this 1969 Gibson SG Custom (factory built with only two pickups and a Bigsby) at Hazen’s Music Store in Plattsburgh, New York. Again, being the generous father he is, he gifted it to his son.
Twin Towers
Parks’ trusts his tone to Dale, aka Elad, Shapiro, too. The clean amp (right) pumps out 120W and is loosely based on an Ampeg circuit, but uses six 6L6s (instead of KT88s) because Elad prefers “a rounder, thumpier, bluesier sound.” It has an additional midrange control and a robust transformer for a solid DI out (aiming for the Motown gold-standard tone). The left-side head is chasing the thunderous sound of a Sunn Model T. It has an added gain stage and a beefed-up power supply for more voltage, making it the ultimate companion to the doom broom. Both Dale cabinets have a single 15" speaker (below) and a pair of 12s (top). The 1980s Sovtek Mig 100H is just paperweight backup for now.
Parks' Pedal Playground
The lone survivor from our 2016 rundown is Parks’ Red Panda Raster, because of his love for its reverse-delay setting. New arrivals include a Boss DD-200 Digital Delay (used only on “Diamonds”), a Greer Little Samson, MXR FOD (hits the dirty amp), and a Boss RV-5 Digital Reverb. A Radial Twin City Active ABY Switcher controls the amps, a Radial Voco-Loco Effects Switcher colors his vocals, and a Sonic Research ST-300 Turbo Tuner keeps his instruments in line.
- Riff Rundown: All Them Witches' "When God Comes Back" - Premier ... ›
- Hooked: All Them Witches' Ben McLeod on R.E.M.'s Monster ... ›
- Spellbinders: Ben McLeod and Charles Michael Parks, Jr. of All ... ›
- Thomas V Jäger—Monolord’s Dark Prince of the V - Premier Guitar ›
- Wolfmother's Andrew Stockdale Guitar Rig Rundown ›
Stompboxtober is rolling on! Enter below for your chance to WIN today's featured pedal from Peterson Tuners! Come back each day during the month of October for more chances to win!
Peterson StroboStomp Mini Pedal Tuner
The StroboStomp Mini delivers the unmatched 0.1 cent tuning accuracy of all authentic Peterson Strobe Tuners in a mini pedal tuner format. We designed StroboStomp Mini around the most requested features from our customers: a mini form factor, and top mounted jacks. |
Intermediate
Intermediate
• Learn classic turnarounds.
• Add depth and interest to common progressions.
• Stretch out harmonically with hip substitutions.
Get back to center in musical and ear-catching ways.
A turnaround chord progression has one mission: It allows the music to continue seamlessly back to the beginning of the form while reinforcing the key center in a musically interesting way. Consider the last four measures of a 12-bar blues in F, where the bare-bones harmony would be C7-Bb7-F7-F7 (one chord per measure). With no turn around in the last two measures, you would go back to the top of the form, landing on another F7. That’s a lot of F7, both at the end of the form, and then again in the first four bars of the blues. Without a turnaround, you run the risk of obscuring the form of the song. It would be like writing a novel without using paragraphs or punctuation.
The most common turnaround is the I-VI-ii-V chord progression, which can be applied to the end of the blues and is frequently used when playing jazz standards. Our first four turnarounds are based on this chord progression. Furthermore, by using substitutions and chord quality changes, you get more mileage out of the I-VI-ii-V without changing the basic functionality of the turnaround itself. The second group of four turnarounds features unique progressions that have been borrowed from songs or were created from a theoretical idea.
In each example, I added extensions and alterations to each chord and stayed away from the pure R-3-5-7 voicings. This will give each chord sequence more color and interesting voice leading. Each turnaround has a companion solo line that reflects the sound of the changes. Shell voicings (root, 3rd, 7th) are played underneath so that the line carries the sound of the written chord changes, making it easier to hear the sound of the extensions and alterations. All examples are in the key of C. Let’s hit it.
The first turnaround is the tried and true I-VI-ii-V progression, played as Cmaj7-A7-Dm7-G7. Ex. 1 begins with C6/9, to A7(#5), to Dm9, to G7(#5), and resolves to Cmaj7(#11). By using these extensions and alterations, I get a smoother, mostly chromatic melodic line at the top of the chord progression.
Ex. 2 shows one possible line that you can create. As for scale choices, I used C major pentatonic over C6/9, A whole tone for A7(#5), D Dorian for Dm9, G whole tone for G7(#5), and C Lydian for Cmaj7(#11) to get a more modern sound.
The next turnaround is the iii-VI-ii-V progression, played as Em7-A7-Dm7-G7 where the Em7 is substituted for Cmaj7. The more elaborate version in Ex. 3 shows Em9 to A7(#9)/C#, to Dm6/9, to G9/B, resolving to Cmaj7(add6). A common way to substitute chords is to use the diatonic chord that is a 3rd above the written chord. So, to sub out the I chord (Cmaj7) you would use the iii chord (Em7). By spelling Cmaj7 = C-E-G-B and Em7 = E-G-B-D, you can see that these two chords have three notes in common, and will sound similar over the fundamental bass note, C. The dominant 7ths are in first inversion, but serve the same function while having a more interesting bass line.
The line in Ex. 4 uses E Dorian over Em9, A half-whole diminished over A7(#9)/C#, D Dorian over Dm6/9, G Mixolydian over G9/B, and C major pentatonic over Cmaj7(add6). The chord qualities we deal with most are major 7, dominant 7, and minor 7. A quality change is just that… changing the quality of the written chord to another one. You could take a major 7 and change it to a dominant 7, or even a minor 7. Hence the III-VI-II-V turnaround, where the III and the VI have both been changed to a dominant 7, and the basic changes would be E7-A7-D7-G7.
See Ex. 5, where E7(b9) moves to A7(#11), to D7(#9) to G7(#5) to Cmaj9. My scale choices for the line in Ex. 6 are E half-whole diminished over E7(#9), A Lydian Dominant for A7(#11), D half-whole diminished for D7(#9), G whole tone for G7(#5), and C Ionian for Cmaj9.
Ex. 7 is last example in the I-VI-ii-V category. Here, the VI and V are replaced with their tritone substitutes. Specifically, A7 is replaced with Eb7, and G7 is replaced with Db7, and the basic progression becomes Cmaj7-Eb7-Dm7-Db7. Instead of altering the tritone subs, I used a suspended 4th sound that helped to achieve a diatonic, step-wise melody in the top voice of the chord progression.
The usual scales can be found an Ex. 8, where are use a C major pentatonic over C6/9, Eb Mixolydian over Eb7sus4, D Dorian over Dm11, Db Mixolydian over Db7sus4, and once again, C Lydian over Cmaj7(#11). You might notice that the shapes created by the two Mixolydian modes look eerily similar to minor pentatonic shapes. That is by design, since a Bb minor pentatonic contains the notes of an Eb7sus4 chord. Similarly, you would use an Ab minor pentatonic for Db7sus4.
The next four turnarounds are not based on the I-VI-ii-V chord progression, but have been adapted from other songs or theoretical ideas. Ex. 9 is called the “Backdoor” turnaround, and uses a iv-bVII-I chord progression, played as Fm7-Bb7-Cmaj7. In order to keep the two-bar phrase intact, a full measure of C precedes the actual turnaround. I was able to compose a descending whole-step melodic line in the top voice by using Cmaj13 and Cadd9/E in the first bar, Fm6 and Ab/Bb in the second bar, and then resolving to G/C. The slash chords have a more open sound, and are being used as substitutes for the original changes. They have the same function, and they share notes with their full 7th chord counterparts.
Creating the line in Ex. 10 is no more complicated than the other examples since the function of the chords determines which mode or scale to use. The first measure employs the C Ionian mode over the two Cmaj chord sounds. F Dorian is used over Fm6 in bar two. Since Ab/Bb is a substitute for Bb7, I used Bb Mixolydian. In the last measure, C Ionian is used over the top of G/C.
The progression in Ex. 11 is the called the “Lady Bird” turnaround because it is lifted verbatim from the Tadd Dameron song of the same name. It is a I-bIII-bVI-bII chord progression usually played as Cmaj7-Eb7-Abmaj7-Db7. Depending on the recording or the book that you check out, there are slight variations in the last chord but Db7 seems to be the most used. Dressing up this progression, I started with a different G/C voicing, to Eb9(#11), to Eb/Ab (subbing for Abmaj7), to Db9(#11), resolving to C(add#11). In this example, the slash chords are functioning as major seventh chords.
As a result, my scale choices for the line in Ex. 12 are C Ionian over G/C, Eb Lydian Dominant over Eb9(#11), Ab Ionian over Eb/Ab, Db Lydian Dominant over Db9(#11), and C Lydian over C(add#11).
The progression in Ex. 13 is called an “equal interval” turnaround, where the interval between the chords is the same in each measure. Here, the interval is a descending major 3rd that creates a I-bVI-IV-bII sequence, played as Cmaj7-Abmaj7-Fmaj7-Dbmaj7, and will resolve a half-step down to Cmaj7 at the top of the form. Since the interval structure and chord type is the same in both measures, it’s easy to plane sets of voicings up or down the neck. I chose to plane up the neck by using G/C to Abmaj13, then C/F to Dbmaj13, resolving on Cmaj7/E.
The line in Ex. 14 was composed by using the notes of the triad for the slash chord and the Lydian mode for the maj13 chords. For G/C, the notes of the G triad (G-B-D) were used to get an angular line that moves to Ab Lydian over Abmaj13. In the next measure, C/F is represented by the notes of the C triad (C-E-G) along with the root note, F. Db Lydian was used over Dbmaj13, finally resolving to C Ionian over Cmaj7/E. Since this chord progression is not considered “functional” and all the chord sounds are essentially the same, you could use Lydian over each chord as a way to tie the sound of the line together. So, use C Lydian, Ab Lydian, F Lydian, Db Lydian, resolving back to C Lydian.
The last example is the “Radiohead” turnaround since it is based off the chord progression from their song “Creep.” This would be a I-III-IV-iv progression, and played Cmaj7-E7-Fmaj7-Fm7. Dressing this one up, I use a couple of voicings that had an hourglass shape, where close intervals were in the middle of the stack.
In Ex. 15 C6/9 moves to E7(#5), then to Fmaj13, to Fm6 and resolving to G/C. Another potential name for the Fmaj13 would be Fmaj7(add6) since the note D is within the first octave. This chord would function the same way, regardless of which name you used.
Soloing over this progression in Ex. 16, I used the C major pentatonic over C6/9, E whole tone over E7(#5), F Lydian over Fmaj13, and F Dorian over Fm6. Again, for G/C, the notes of the G triad were used with the note E, the 3rd of a Cmaj7 chord.
The main thing to remember about the I-VI-ii-V turnaround is that it is very adaptable. If you learn how to use extensions and alterations, chord substitutions, and quality changes, you can create some fairly unique chord progressions. It may seem like there are many different turnarounds, but they’re really just an adaptation of the basic I-VI-ii-V progression.
Regarding other types of turnarounds, see if you can steal a short chord progression from a pop tune and make it work. Or, experiment with other types of intervals that would move the chord changes further apart, or even closer together. Could you create a turnaround that uses all minor seventh chords? There are plenty of crazy ideas out there to work with, and if it sounds good to you, use it!
Fuchs Audio introduces the ODH Hybrid amp, featuring a True High Voltage all-tube preamp and Ice Power module for high-powered tones in a compact size. With D-Style overdrive, Spin reverb, and versatile controls, the ODH offers exceptional tone shaping and flexibility at an affordable price point.
Fuchs Audio has introduced their latest amp the ODH © Hybrid. Assembled in USA.
Featuring an ODS-style all-tube preamp, operating at True High Voltage into a fan-cooled Ice power module, the ODH brings high-powered clean and overdrive tones to an extremely compact size and a truly affordable price point.
Like the Fuchs ODS amps, the ODH clean preamp features 3-position brite switch, amid-boost switch, an EQ switch, high, mid and low controls. The clean preamp drives theoverdrive section in D-Style fashion. The OD channel has an input gain and outputmaster with an overdrive tone control. This ensures perfect tuning of both the clean andoverdrive channels. A unique tube limiter circuit controls the Ice Power module input.Any signal clipping is (intentionally) non-linear so it responds just like a real tube amp.
The ODH includes a two-way footswitch for channels and gain boost. A 30-second mute timer ensures the tubes are warmed up before the power amp goes live. The ODH features our lush and warm Spin reverb. A subsonic filter eliminates out-of-band low frequencies which would normally waste amplifier power, which assures tons of clean headroom. The amp also features Accent and Depth controls, allowing contouring of the high and low response of the power amp section, to match speakers, cabinets andenvironments. The ODH features a front panel fully buffered series effects loop and aline out jack, allowing for home recording or feeding a slave amp. A three-position muteswitch mutes the amp, the line out or mute neither.
Built on the same solid steel chassis platform as the Fuchs FB series bass amps, the amps feature a steel chassis and aluminum front and rear panels, Alpha potentiometers, ceramic tube sockets, high-grade circuit boards and Neutrik jacks. The ICE power amp is 150 watts into 8 ohms and 300 watts into 4 ohms, and nearly 500 watts into 2.65 ohms (4 and8 ohms in parallel) and operates on universal AC voltage, so it’s fully globallycompatible. The chassis is fan-cooled to ensure hours of cool operation under any circumstances. The all-tube preamp uses dual-selected 12AX7 tubes and a 6AL5 limiter tube.
MAP: $ 1,299
For more information, please visit fuchsaudiotechnology.com.
Jackson Guitars announces its first female signature artist model, the Pro Series Signature Diamond Rowe guitar.
“I‘m so excited about this new venture with the Jackson family. This is a historic collaboration - as I am the first female in the history of Jackson with a signature guitar and the first female African American signature Jackson artist. I feel so honored to have now joined such an elite group of players that are a part of this club. Many who have inspired me along this journey to get here. It’s truly humbling.” says Diamond.
Diamond Rowe is the co-founder and lead guitarist for the metal/hard rock band Tetrarch. Since co-founding the band in high school, Tetrarch has become one of the most talked about up-and-coming bands in the world - with several press outlets such as Metal Hammer, Kerrang, Revolver, Guitar World and many others boldly naming Diamond Rowe the world’s next guitar hero. Tetrarch has connected with many fans while performing on some of the world's biggest stages garnering spots alongside several of the heavy music world’s biggest names such as Guns N’ Roses, Slipknot, Lamb of God, Disturbed, Avenged Sevenfold, Sevendust, Rob Zombie, Trivium, and many many others. The Jackson Pro Series Signature Diamond Rowe DR12MG EVTN6 is based on Jackson’s single-cut Monarkh platform and is a premium guitar designed for progressive metal players seeking precision and accuracy.
Crafted in partnership with Diamond, this model boasts a 25.5 “ scale, Monarkh-styled nyatoh body draped with a gorgeous poplar burl top, three-piece nyatoh set-neck with graphite reinforcement, and 12˝ radius bound ebony fingerboard with 24 jumbo frets. The black chrome-covered active EMG® 81/85 humbucking bridge and neck pickups, three-way toggle switch, single volume control, and tone control provide a range of tonal options. The Evertune® bridge ensures excellent tuning stability, while the Dark Rose finish with a new custom 3+3 color-matched Jackson headstock and black hardware looks simply stunning.
To showcase the Pro Plus Signature Diamond Rowe DR12MG EVTN6, Diamond shares her journey as a guitarist, delving into the inspiration behind her unique design specifications and the influential artists who shaped her sound within a captivating demo video. This video prominently features powerful performances of Tetrarch’s latest release, “Live Not Fantasize,” and “I’m Not Right” showcasing the DR12MG EVTN6’s unparalleled tonal versatility and performance capabilities.
MSRP $1699.99
For more information, please visit jacksonguitars.com.