The silky smooth slide man may raise a few eyebrows with his gear—a hollow, steel-bodied baritone and .017s on a Jazzmaster—but every note and tone he plays sounds just right.
KingTone’s The Duellist is currently Ariel Posen’s most-used pedal. One side of the dual drive (the Bluesbreaker voicing) is always on. But there’s another duality at play when Posen plugs in—the balance between songwriter and guitarist.
“These days, I like listening to songs and the story and the total package,” Posen told PG back in 2019, when talking about his solo debut, How Long, after departing from his sideman slot for the Bros. Landreth. “Obviously, I’m known as a guitar player, but my music and the music I write is not guitar music. It’s songs, and it goes back to the Beatles. I love songs, and I love story and melody and singing, and there was a lot of detail and attention put into the guitar sound and the playing and the parts—almost more than I’ve ever done.”
And in 2021, he found himself equally expressing his yin-and-yang artistry by releasing two albums that represented both sides of his musicality. First, Headway continued the sultry sizzle of songwriting featured on How Long. Then he surprised everyone, especially guitarists, by dropping Mile End, which is a 6-string buffet of solo dishes with nothing but Ariel and his instrument of choice.
But what should fans expect when they see him perform live? “I just trust my gut. I can reach more people by playing songs, and I get moved more by a story and lyrics and harmony, so that’s where I naturally go. The live show is a lot more guitar centric. If you want to hear me stretch out on some solos, come see a show. I want the record and the live show to be two separate things.”
The afternoon ahead of Posen’s headlining performance at Nashville’s Basement East, the guitar-playing musical force invited PG’s Chris Kies on stage for a robust chat about gear. The 30-minute conversation covers Posen’s potent pair of moody blue bombshells—a hollow, metal-bodied Mule Resophonic and a Fender Custom Shop Jazzmaster—and why any Two-Rock is his go-to amp. He also shares his reasoning behind avoiding effects loops and volume pedals.
Brought to you by D’Addario XPND Pedalboard.
Blue the Mule III
If you’ve spent any time with Ariel Posen’s first solo record, How Long, you know that the ripping, raunchy slide solo packed within “Get You Back” is an aural high mark. As explained in a 2019 PG interview, Posen’s pairing for that song were two cheapos: a $50 Teisco Del Rey into a Kay combo. However, when he took the pawnshop prize onstage, the magic was gone. “It wouldn’t stay in tune and wouldn’t stop feeding back—it was unbearable [laughs].”
Posen was familiar with Matt Eich of Mule Resophonic—who specializes in building metal-body resonators—so he approached the luthier to construct him a steel-bodied, Strat-style baritone. Eich was reluctant at first (he typically builds roundneck resos and T-style baritones), but after seeing a clip of Posen playing live, the partnership was started.
The above steel-bodied Strat-style guitar is Posen’s third custom 25"-scale baritone. (On Mule Resophonic’s website, it’s affectionately named the “Posencaster.”) The gold-foil-looking pickups are handwound by Eich, and are actually mini humbuckers. He employs a custom Stringjoy set (.017–.064 with a wound G) and typically tunes to B standard. The massive strings allow the shorter-scale baritone to maintain a regular-tension feel. And when he gigs, he tours light (usually with two guitars), so he’ll use a capo to morph into D or E standard.
Moody Blue
Another one that saw recording time for Headway and Mile End was the above Fender Custom Shop Masterbuilt ’60s Jazzmaster, made by Carlos Lopez. To make it work better for him, he had the treble-bleed circuit removed, so that when the guitar’s volume is lowered it actually gets warmer.
"Clean and Loud"
Last time we spoke with Posen, he plugged into a Two-Rock Classic Reverb Signature. It’s typically his live amp. However, since this winter’s U.S. run was a batch of fly dates, he packed light and rented backlines. Being in Music City, he didn’t need to go too deep into his phone’s contacts to find a guitar-playing friend that owned a Two-Rock. This Bloomfield Drive was loaned to Ariel by occasional PG contributor Corey Congilio. On the brand’s consistent tone monsters, Posen said, “To be honest, put a blindfold on me and make one of Two-Rock’s amps clean and loud—I don’t care what one it is.”
Stacked Speakers
The loaner vertical 2x12 cab was stocked with a pair of Two-Rock 12-65B speakers made by Warehouse Guitar Speakers.
Ariel Posen’s Pedalboard
There are a handful of carryovers from Ariel’s previous pedalboard that was featured in our 2021 tone talk: a TC Electronic PolyTune 3 Noir, a Morningstar MC3 MIDI Controller, an Eventide H9, a Mythos Pedals Argonaut Mini Octave Up, and a KingTone miniFUZZ Ge. His additions include a custom edition Keeley Hydra Stereo Reverb & Tremolo (featuring Headway artwork), an Old Blood Noise Endeavors Black Fountain oil can delay, Chase Bliss Audio Thermae Analog Delay and Pitch Shifter, and a KingTone The Duellist overdrive.
Another big piece of the tonal pie for Posen is his signature brass Rock Slide. He worked alongside Rock Slide’s Danny Songhurst to develop his namesake slide that features a round-tip end that helps Posen avoid dead spots or unwanted scratching. While he prefers polished brass, you can see above that it’s also available in a nickel-plated finish and an aged brass.
- Pro Pedalboards 2022! ›
- Ariel Posen: “Dynamics Are the Most Important Thing.” ›
- Hooked: Ariel Posen on the Beatles' "Because" ›
- Ariel Posen Steps Out with 'How Long' ›
The in-demand New York-based musician and singer shares how she became one of the music industry’s buzziest bass players.
At 26, Blu DeTiger is the youngest musician ever to have a signature Fender bass guitar. The Fender Limited Player Plus x Blu DeTiger Jazz Bass, announced in September, pays tribute to the bassist and singer’s far-reaching impact and cultural sway. She’s played with Caroline Polachek, Bleachers, FLETCHER, Olivia Rodrigo, and more, and released her own LP in March 2024. In 2023, Forbes feature her on their top 30 Under 30 list of musicians. So how did DeTiger work her way to the top?
DeTiger opens up on this episode of Wong Notes about her career so far, which started at a School of Rock camp at age seven. That’s where she started performing and learning to gig with others—she played at CBGB’s before she turned 10. DeTiger took workshops with Victor Wooten at Berklee followed and studied under Steven Wolf, but years of DJing around New York City, which hammered in the hottest basslines in funk and disco, also imprinted on her style. (Larry Graham is DeTiger’s slap-bass hero.)
DeTiger and Wong dish on the ups and downs of touring and session life, collaborating with pop artists to make “timeless” pop songs, and how to get gigs. DeTiger’s advice? “You gotta be a good hang.”
Wong Notes is presented by DistroKid.
Use this link for 30% off your first year.
Gibson Band Featuring Slash, Duff McKagan, and Cesar Gueikian Announce Benefit Single
100% of "I Can Breathe" song proceeds to benefit the National Alliance on Mental Illness, NAMI.
On Giving Tuesday, Gibson announces a new release from the Gibson Band--a revolving collective of musicians who join together to make music and raise funds and awareness for worthy causes.. A hard-hitting rock song, the new benefit single “I Can Breathe” features rhythm guitars and piano from Cesar Gueikian, CEO of Gibson, with special guests Duff McKagan on lead vocals and lyrics, and Slash on lead guitar and solos. 100% of the proceeds from the sale of the song “I Can Breathe” will benefit the National Alliance on Mental Illness (NAMI), through Gibson Gives. NAMI is the nation’s largest grassroots mental health resource organization that is dedicated to building better lives for the millions of Americans affected by mental illness.
On “I Can Breathe” Duff McKagan crafted the lyrics and is featured on lead vocals, Cesar Gueikian wrote the music and played rhythm guitar and piano, and Slash wrote and played thelead guitar and solos, while Jota Morelli (drums), and Seta Von Gravessen (bass) rounded outthe group in the studio. The music was recorded by Cesar at La Roca Power Studio in BuenosAires, Argentina, vocals were recorded by Duff at the Sound Factory in Los Angeles and leadguitars and solos by Slash in Los Angeles. The track was produced by Cesar Gueikian and JorgeRodriguez with collaboration from Pablo Toubes and Francisco Trillini, and mixed and masteredby Greg Gordon. A special thanks goes to Gonzalo Riviera Villatte, Gina Furia, and guitar techLisardo Alvarez for all his work at La Roca Power Studio.
Gibson Records, Duff McKagan, Slash, and Cesar Gueikian, will donate 100% proceeds from thesale of “I Can Breathe,” in addition to all auction funds raised to the National Alliance on MentalIllness (NAMI), through Gibson Gives. NAMI is the nation’s largest grassroots mental healthresource organization that is dedicated to building better lives for the millions of Americans affectedby mental illness. NAMI’s mission is to create a world where all people affected by mentalillness live healthy, fulfilling lives supported by a community that cares.
“It was such a pleasure to work with Cesar and his whole crew on this tune,” says Duff McKagan.“The musical slant and progressive rock-ness of this huge epic pushed me in a whole new direction. Ilove a challenge and Cesar killed it! Most importantly, to be of service for mental health issues andawareness is super important to me at this time. Let’s rock!”
“Cesar and Duff came to me with a really cool piece of music,” adds Slash. “I loved the riff idea, andDuff's vocal, so I felt right at home on the track.”
“Guns N’ Roses had a profound influence on me and my guitar playing, so having the opportunity towrite and record this song with Slash and Duff is a dream come true, and it’s an honor to call themfriends and partners,” says Cesar Gueikian, CEO of Gibson. “’I Can Breathe’ started as aninstrumental track I recorded at La Roca Power Studio in Buenos Aires. Upon listening to the mix thatGreg Gordon put together, Jenny Marsh (Global Director of Cultural Influence at Gibson) suggestedDuff as lyricist and vocalist. Guns N’ Roses had just come off touring when I shared the song withDuff, he loved it and quickly wrote the lyrics and cut the vocals at the Sound Factory in Los Angeles.Having Duff on vocals made the next step obvious, which was asking Slash if he would collaboratewith lead guitars and solos. Both Duff and Slash transformed the track from a collection of riffs to agreat song! While Greg Gordon’s mixing and creativity tied it all together. I am grateful for thecollaboration from Slash, Duff and Greg, and from my friend Serj Tankian’s participation with coverartwork. I’m thrilled we are donating all proceeds from the song to a great and relevant cause.”
Made in close collaboration and with significant input from Jimmy Page, the Jimmy Page EDS-1275 uses new 3D scanning technology to aid in handcrafting an effective clone of his original EDS-1275.
There are very few guitars that can claim to be as instantly recognizable and iconic as Jimmy Page’s 1969 EDS-1275 Doubleneck. The photos of him playing it on stage with Led Zeppelin are indelible to rock ’n’ roll history. While Gibson has been making doubleneck electric guitars since 1958, Jimmy was the player who defined the EDS-1275 from the day it was delivered to him. Introducing the Jimmy Page EDS-1275 Doubleneck VOS, now part of the Gibson Custom core lineup and built to the exact specifications of Jimmy’s iconic EDS-1275 Doubleneck.
The Jimmy Page EDS-1275 features a double-cutaway one-piece mahogany body that provides exceptional access to the full length of both the12-string and six-string mahogany necks. Both necks have long tenons and are hide glue fit, and the neck profiles are recreated from 3D scans of the necks on the original guitar. The necks are both capped with bound Indian rosewood fretboards. Each fretboard is equipped with 20 authentic medium jumbo frets and adorned with aged cellulose nitrate parallelogram inlays. The fretboards of both necks have a 12” radius, which is perfect for both playing chords as well as for string bending while soloing. The 18 tuners are Kluson double line, double ring style, just like those found on the original guitar, and even the headstocks feature the correct 17-degree angle and specific logo stylization found on Jimmy’s EDS-1275. The electronics are just as authentic and deliver all of the sonic character of Jimmy’s legendary EDS-1275. Two uncovered Jimmy Page EDS-1275 Custombuckers with double black bobbins and Alnico 5 magnets are used for the two six-string pickups, while a covered pair is installed on the 12-string neck. Of course, the two volume and two tone controls use CTS potentiometers and period-correct ceramic disc capacitors, and the pickup select switch, neck select switch, and output jack are all from Switchcraft.
Here is your opportunity to own a clone of Jimmy Page’s famous EDS-1275, identical to how it appeared on the day that Jimmy first received the guitar. A Gibson Custom hardshell case is included, along with a vintage leather strap, and a certificate of authenticity with a photo from famed photographer Barrie Wentzell.
Jimmy Page EDS-1275 Doubleneck VOS '69 Cherry
Recreation of the EDS-1275 used by Jimmy Page made using 3D scans of the original guitar, one piece mahogany body, mahogany six and 12-string necks with custom Jimmy Page profiles, Indian rosewood fretboards, Jimmy Page Custombucker pickups with Alnico 5 magnets and double black bobbins, Gibson Custom hardshell case
Here’s the doubleneck dream realized, even if it weighs 9 pounds, 5 ounces.
Taking a Squier Affinity Stratocaster and Mini Precision Bass, one reader created a super-versatile instrument for looping that he can pick, pluck, tap, and slap.
I've been using a multitrack looper with a guitar and an octave pedal, which was okay for simple bass parts, but didn’t give me thick strings and I couldn’t slap with it. So I decided to build a double-neck prototype specifically for looping, with a 6-string guitar and a 4-string bass.
Since building the necks would be the hardest part, I looked around for instruments with bolt-on necks I could reuse. Squier makes an Affinity Stratocaster and a Mini Precision Bass which were affordable and had matching fretboards, so I bought those. It was also cheaper to reuse the electronics and hardware that came with them, rather than buying everything separately.
Using two precut instrument bodies saved the burden of having to route cavities for the electronics.
My plan was to design my own body from scratch. As I debated which neck should go on top, how far apart they should be, and whether to line up the nuts or the saddles, I realized there was actually enough wood there to make a double neck body, which saved me the work of recreating the neck pockets, etc. Putting the guitar on top made barre chords much more comfortable, and the 28.6" bass scale meant I could still reach the first fret easily.
After stripping the paint with a heat gun, I ran both bodies through a table saw, glued them together, and thinned them to 1 3/8". Then I created an offset body shape, a new arm bevel, and reshaped the three cutaways. The pickguards are both original, with the guitar side cut down to make a yin and yang shape. The controls are volume and tone for each neck, using the original knobs. I moved the jack to the back and upgraded it to stereo so the guitar and bass signals can run through separate effects chains.
Note the location of the jack on the back of the extended-shape body. It’s unconventional but practical.
My top concerns were weight and ergonomics. Many doublenecks are around 12 to 13 pounds and 18" wide. I knew I would never play something that big, no matter how good it sounded. To that end, I saved weight everywhere and tracked everything to the gram in a spreadsheet. (That’s also the reason I chose a fixed bridge instead of a vibrato.) I ultimately used a wipe-on gel stain to keep the weight down further. Stripping the paint from the factory saved 5 ounces! The final playable weight is 9 pounds, 5 ounces, and 15 1/4" wide at the lower bout. This has been pretty manageable, however, there is some neck dive because of the tuners. I’m taking everything I’ve learned from this prototype and designing a new doubleneck, which will be headless. I believe I can shed another pound and eliminate the neck dive that way. You can watch my entire build on YouTube.