Witness drone metal overlords Stephen O’Malley and Greg Anderson pack and rattle a cave with two guitars, 14 amps, 16 cabinets, and 19 pedals to test the Earth’s crust.
We’ve featured loud rigs. We’ve stood strong in front of Matt Pike’s octet of Oranges, been washed over with waves of volume from Angus Young’s nine Marshalls for AC/DC’s “small gig setup” in an arena, trembled from J Mascis’ three plexi full stacks, and even withstood Bonamassa’s barrage of seven amps at the Ryman, but nothing prepared us or compared to the Godzilla-rising-from-the-Pacific roar that is Sunn O)))’s auditory artillery. And it’s more than the sheer sight of 14 amps and 16 cabs or the dishing of deafening decibels; it’s the interplay of these characters and their conductors.
“The third member of the band is the amplifiers!” laughed Greg Anderson in a 2014 interview with PG. “We use vintage Sunn Model Ts from the early ’70s. They’re a crucial part of the show. I’ve got more amps than I have guitars.”
Stephen O’Malley takes a more metaphysical outlook to the connection between him and the thundering Model Ts. “My philosophy is that I’m just part of this bigger circuit of the instrumentation,” he says. “You have, of course, the amplifier valves, the speaker, effects pedals acting like different and various voltage filters, the air in the room, and the feedback generated from all this equipment, so who’s in the band is immaterial.”
We learned more about O’Malley’s perspective when, following a 90-minute drive southeast from Nashville to Pelham, Tennessee, and a short descent into The Caverns, the Sunn O))) guitar tag team welcomed PG’s Chris Kies onstage for an amplifying chat. O’Malley details his signature Travis Bean Designs SOMA 1000A, while Anderson explains how a broken guitar led him to his beloved Les Paul goldtop. Both pay homage and reverence to the eight Sunn Model Ts that form the band’s foundational tonal force, and explain why the LM308-chip Rat influenced their Life Pedal collaboration with EarthQuaker Devices.
Special Silver 25th anniversary edition of the V.3 Life Pedal
Sunn O)) Official Website
Brought to you by D’Addario XPND Pedalboard.
Silverburst Slugger
This is Stephen O’Malley’s signature Travis Bean Designs SOMA 1000A that he co-designed alongside Electrical Guitar Company’s Kevin Burkett and late luthier Travis Bean’s wife, Rita Bean. Burkett revitalized the brand in the early 2010s with the guidance of Rita and Travis’ longtime business partner Marc McElwee.
First off, just like the original TB models, these feature a single piece of 7075-T651 aluminum alloy that runs the length of the guitar’s backside that makes up the headstock, neck, and the rear half of the body. Its scale length is 25.5", the neck radius is 12", and it has a brass nut set for the band’s use of A tuning. The handwound high-gain TB humbuckers are built to Stephen’s specs. The build includes CTS pots, Sprague caps, and Switchcraft hardware. The silverburst finish covers a koa body.
Stephen’s thoughts on the collaboration: “Being honored with a signature model is great, but the bigger achievement or accomplishment is having an interaction with Kevin and the Bean family, who produced an instrument we’re all proud of.”
Strong T
Here’s the standard eye-catching T headstock and brass nut featured on all old and new Travis Bean instruments.
Stephen’s Specter
This transparent devil is an Electrical Guitar Company Ghost that has a 1-piece aluminum neck that covers backup duties for O’Malley. Fun fact: this has the same pickups in it as Steve Albini’s high-output single-coils in his Travis Bean Designs TB500 signature. They are RWRP (reverse-wound, reverse-polarity) to reduce the 60-cycle hum.
Greg’s Lucky Goldtop
While touring with Boris in 2008 or ’09, Greg’s main 1989 Gibson Les Paul goldtop endured a neck fracture. On their next day off, he wandered into the nearest Guitar Center and walked out with the above 2005 Gibson Les Paul Deluxe. It originally had mini humbuckers, but Anderson felt they were “thin-sounding.” So, he swapped them out for a set of DiMarzio P90 Super Distortions, that are actually humbuckers housed in P-90 enclosures for replacements that don’t require routing. He loves the violent output and grind provided by the P90 Super Distortions.
Sonic Protagonists
“The amps are certainly the main characters of the band,” concedes O’Malley. The main protagonists for Sunn O)))’s sonic saga are the eight Sunn Model T heads they set onstage. (Six are on and plugged into, while each member has a dedicated backup.) Stephen mentions in the Rundown that he prefers lower-wattage speakers, but when requesting backlines or renting gear from SIR, they can’t be too picky with the vast amount of cabinets they need. O’Malley runs his Model Ts and ’80s Ampeg MTI SVT through either 4x12s from Sound City or Fryette. The silver-panel Ampeg SVT-VRs flanking both ends of the semi-circle, are being slaved by each member’s MTI SVT, and that signal is hitting their matching Ampeg Heritage SVT-810AV cabinets outfitted with 10" Eminence drivers.
Stephen O’Malley’s Pedalboard
“My concept in playing this music for tone involves many, many, many different gain stages that are all intonated differently depending on the pitch of the sound. There are slight shades of color saturation or grain as if it’s a paint—the shorter bandwidth color gradation or the density of the paint.” All these subtle sweeps of saturation, sustain, and feedback are enlivened and exaggerated with Stephen’s pedal palette. His current collection of slaughtering stomps include the band’s most recent collaboration with EarthQuaker Devices (Life Pedal V3), an Ace Tone FM-3 Fuzz Master, a Pete Cornish G-2, and an EarthQuaker Devices Black Ash. For subtler shadings, he has a J. Rockett Audio Designs Archer.
The EQD Swiss Things creates effects loops to engage the FM-3, G-2, or the Black Ash. In addition, he runs a Roland RE-201 Space Echo through the Swiss Things, too. O’Malley uses the Aguilar Octamizer as a “fun punctuation that comes on once in a while. It abstracts the guitar into minimalist electronics [laughs].” The custom Bright Onion Pedals switcher keeps the amps in sync with phase controls and ground lifts. A Peterson StroboStomp HD keeps his Travis Bean in check. Off to the side of the board is a Keeley-modded Rat that initiated the band’s core sound, plus a Lehle Mono Volume. (Stephen is a Lehle endorsee.) This circuit includes the heralded LM308 chip and was the basis for their partnership with EQD and the Life Pedal series.
Space and Time
Elevated off the stage floor and secured by a stand are O’Malley’s Roland RE-201 Space Echo and Oto Machines BAM Space Generator Reverb.
Greg Anderson’s Pedalboard
“To be honest with you, I try to keep it pretty simple now because I love pedals and have fallen down a lot of rabbit holes with them, but I found myself troubleshooting and having more issues than my sound warranted. When I started with this band, it was just a Rat and tuner pedal, so I try to just bring what I need,” says Anderson. He found a potent pairing with the EQD Life Pedal V2 acting as a boost and running into a vintage Electro-Harmonix Sovtek Civil War Big Muff that creates a “powerful, chewy, ooze” tone. Like O’Malley, he also has a custom Bright Onion Pedals box and an Aguilar Octamizer set to unleash a “ridiculous, beating, fighting, chaotic, sub-bass sound.” An Ernie Ball VP Junior handles dynamics, a Boss TU-2 Chromatic Tuner keeps his goldtop in shape, and an MXR Mini Iso-Brick powers his pedals.
- Drone Alone: The Savage Soundscapes of Sunn O))) ›
- First Look: EarthQuaker Devices Sunn O))) Life Pedal V3 ›
- Rig Rundown: Sleep ›
- Mission and Fender Announce the return of Sunn Amplifiers - Premier Guitar ›
- Experience Raw Power with Sunn Amps DoomBox ›
Featuring a newly-voiced circuit with more compression and versatility, these pedals are hand-crafted in Los Angeles for durability.
Messiah Guitars custom shop has launched a pair of new pedals: The Eddie Boostdrive Session Edition and Lil’ Ed Session Drive.
The two pedals are full-size and mini-sized versions of a newly-voiced circuit based on Messiah’s successful Eddie Boostdrive. The two new “Session” pedals feature more compression and versatility in the overall tone, and showcase Messiah’s ongoing collaboration with Nashville session guitarist Eddie Haddad.
The new Session Boostdrive schematic includes a fine-tuned EQ section (eliminating the need for the Tight switch on the earlier Boostdrive) and two independently operated circuits: a single-knob booster, and a dual-mode drive featuring a 3-band EQ. The booster consists of a single-stage MOSFET transistor providing boost ranging from -3dB to 28dB. At low settings, the boost adds sparkle to the tone, while a fully cranked setting will send your amp to a fuzzy territory. Thebooster engagement is indicated by a purple illuminated foot switch.
The overdrive contains a soft-clipped op-amp stage, inspired by a screamer-style circuit. The pedal includes a classic Silicon clipping mode (when activated, the pedal’s indicator light is blue)and an LED mode for a more open, amp-like break up (indicator light is red).
The active 3-band EQ is highly interactive and capable of emulating many popular drive sounds. Although both effects can be used separately, engaging them simultaneously produces juicy tones that will easily cut through the mix. Both new pedals accept a standard 9V pedal power supply with negative center pin.
“I love my original Boostdrive,” says Haddad, “but I wanted to explore the circuit and see if we could give it more focused features. This would make it more straightforward for guitarists who prefer simplicity in their drive pedals. The boost is super clean and loud in all the right ways…it can instantly sweeten up an amp and add more heft and sparkle to the drive section.”
Like their custom guitars and amplifiers, Messiah’s pedals are hand-crafted in Los Angeles for durability and guaranteed quality.
The Lil’ Ed Session Drive pedal includes:
- 5-knob controls, a 2-way mode side switch
- Durable, space-saving cast aluminum alloy 1590A enclosure with fun artwork
- True bypass foot switch
- Standard 9V/100mA pedal power input
The Eddie Session Edition pedal features:
- 6-knob controls, a 2-way mode switch; space-saving top-side jacks
- Durable, cast aluminum alloy 125B enclosure with fun artwork
- Easy to see, illuminated optical true bypass foot switches
- Standard 9V/100mA pedal power input
The Eddie Boostdrive Session Edition retails for $249.00, and the Lil’ Ed Session Drive for$179.
For more information, please visit messiahguitars.com.
Eddie BoostDrive and Lil' Ed pedal review with Eddie & Jax - YouTube
Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.Joe Glaser has been a pillar of Nashville's guitar community for decades. He's a man that dreams in mechanical terms often coming up ideas while deep in a REM cycle. Through his various companies he's designed, developed, and released a handful of "blue water" solutions to age-old instrument problems making the tolerable terrific. In this comprehensive visit to Glaser's home base, we get up close and personal with several of the products that enhance intonation and playability without disrupting the guitar's integrity.
In addition, Music City Bridge CEO Joshua Rawlings introduces us to a couple software ventures. Shop Flow helps increase productivity and efficiency for guitar builders and repair shops, while Gear Check aims to help guitarist's keep track of their collection and its history. Join John Bohlinger as he goes inside this inconspicuous six-string sanctuary.
With 700 watts of power, built-in overdrive, versatile EQ options, and multiple output choices, this bass head is designed to deliver unparalleled clarity and performance in a lightweight, rugged package.
PowerStage 700 Bass is compact and durable for easy transport yet powerful enough to fill any venue. This world-class bass head can also serve as the ideal clean power platform to amplify your preamp or modeler. Streamline your rig without compromising your sound and focus on what truly matters—your music.
Designed by Seymour Duncan’s legendary engineer Kevin Beller, a lifelong bass player, this 700-watt bass head delivers unparalleled clarity and performance in a lightweight, rugged package. Whether plugging in on stage or in the studio, PowerStage 700Bass provides tight low-end and rich harmonics, with a footswitchable built-in overdrive for an extra layer of sonic versatility.
A robust, bass-optimized EQ (treble, low mid, high mid, bass and presence) tailors your sound to any room. Need to switch between active and passive basses? You’re covered - PowerStage700 Bass includes a convenient -10db pad control. Multiple output options (¼”, Speakon, XLRDI, and headphone) work for any setup, whether powering cabinets, going direct to a PA, or recording straight into your audio interface.
- 700 Watts of Power at 4 ohms• Preamp voiced for a wide range of vintage & amp; modern bass sounds
- Built-in Overdrive that can go from a light vintage saturation to full-throttle bone-grinding distortion (with optional foot-switchable control)
- Effects loop allows for post-preamp processing and easy integration with modelers and preamp pedals
- 4 band EQ, Sweepable mid controls, and presence button offer dynamic tone shaping possibilities
- Aux input
- Super lightweight and durable chassis for easy transport with our optional gig bag or rack ears.
For more information, please visit seymourduncan.com.
Tone, Power, Portability: PowerStage 700 Bass | Seymour Duncan's New Bass Amp Head - YouTube
With separate Doom and Shimmer controls, low-pass and high-pass filter settings, and built-in Grit dynamic distortion, this pedal is a must-have for creating atmospheric sounds.
“Batverb was inspired by our Eurorack module, Desmodus Versio, but when we tried to bring thatexperience to guitar, we realized quickly that we would need to rethink the approach. The module andBatverb share zero code: the entire thing was redesigned from the ground up, with the dynamics and tonality of guitar at the forefront,” said Stephen McCaul, Chief Noisemaker at Noise Engineering.
Batverb was designed and built in sunny Southern California. It is currently available for preorder at $499 and will start shipping March 13, 2025.
Key Features
- Predelay/delay Time and Regen controls
- Separate Doom and Shimmer controls add in suboctaves and haunting overtones
- Low-pass and high-pass filter settings for the reverb tank allow you to add filtering and harmonics to reverb tails
- Built-in Grit dynamic distortion can apply to only the wet signal or the whole output
- Includes onboard dry/wet Blend control and input- and output-gain parameters
- Duck switch controls the reverb’s behavior using your playing to shape the output
- Three bypass modes allow control of tails when pedal is disengaged
- Create instant atmospheres with reverb-freezing Hold footswitch
- Route the expression input can to any parameter on the pedal
- Store and recall 16 presets in response to MIDI program-change messages
For more information, please visit noiseengineering.us.