Ever wonder what Skynyrd would've sounded like if they were from the Lone Star state instead of the swamp? Well, that's just a taste of what childhood friends in Whiskey Myers have been serving on ice for the last decade.
The Texas-bred band has released five records since 2008. (They're currently working on their sixth.) Through those handful of albums, the country-leaning rockers refined their from-the-gut songwriting and heartfelt performances eventually earning them a No. 1 record on both Billboard's U.S. Country and Indie charts with 2019's Whiskey Myers.
During the recording process of the forthcoming album, Whiskey Myers' cofounding guitarist John Jeffers virtually welcomed PG's Perry Bean into his Texas-based tone bunker.
In this episode, the self-taught guitarist shows off his main Gibsons (including some rare finds and classic reissues), breaks down his Vox pillars, and details the smattering of stomps he kicks on for a wide-range of tones covering the rock and the roll.
[Brought to you by: D'Addario Backline Gear Transport Pack]
1994 Gibson Les Paul Standard
Pro players typically graduate from their first love. In John Jeffers' case, one of his main axesāthe above 1994 Gibson Les Paul Standardāwas the electric that started it all. It was a gift from bandmate Cody Tate's uncle. Before it became his sweet baby, the stock pickups were swapped out for a Seymour Duncan SH-4 JB (neck) and DiMarzio Super Distortion (bridge). All of double-J's guitars take Ernie Ball Power Slinkys (.011ā.048).
2011 Gibson Les Paul Custom Blonde Beauty
A key backup would be this 2011 Gibson Les Paul Custom Blonde Beauty that Jeffers says is rare because only a few hundred were made. This was a gift from one of the band's longtime fans that used to help fill up their gas tank to ensure they could make it to the next gig.
Gibson ES-339
No your eyes aren't deceiving you, this Gibson ES-339 looks like a 335, but is actually comparable in size to a Les Paul. Other differences from its big brother is the implementation of the Memphis Tone Circuit that reverts back to simplified '50s-style wiring where the tone control is connected to the volume control rather than the pickup. It results in a less-obvious tone-control sweep.
2004 Gibson Les Paul Junior
Now he'll play slide on anything you hand him, but Jeffers does prefer to get greasy with this 2004 Gibson Les Paul Junior because it rides well in modal-G tuning for songs like "Home" and "On the River."
1992 Gibson 1967 Reissue SG Custom
Here's something Jeffers' had been lusting over for a long timeāa 1992 Gibson 1967 Reissue SG Custom. He's always wanted an original '61 Les Paul (the first year of the SG shape), but this wonderful reissue will suffice until that day comes.
Handwired Vox AC30HWHD Heads & Matching Cabinets
All those Gibsons bark and growl through a pair of handwired Vox AC30HWHD heads and matching 2x12 cabs (all loaded with Celestion Alnico Blue speakers). In a typical live setup, Jeffers will run the left stack as a rhythm tone (mic'd with a Sennheiser MK4) and right stack is for lead tone.
John Jeffers' Pedalboard
Jeffers is a man of many tones requiring only a few pedals. Currently in his arsenal is a Hermida Audio Reverb, Skreddy Pedals Echo, Menatone Red Snapper Overdrive, Union Tube & Transistor More, Analog Man Sun Face Fuzz NKT 275, and a Dunlop SW-95 Slash Signature Cry Baby wah. Managing his AC30s are a pair of Lehle Mono Volume pedals, keeping the guitars in check is a Vox VXT-1 Strobe Tuner, and powering all the pedals is a Cioks DC7.
- Hooked: Blackberry Smoke's Charlie Starr on ZZ Top's "Nasty Dogs ... āŗ
- Rig Rundown: Blackberry Smoke - Premier Guitar | The best guitar ... āŗ
- Reader Guitar of the Month: T-Style Chickadee - Premier Guitar ... āŗ
The Gibson EH-185, introduced in 1939, was one of the companyās first electric guitars.
Itās hard to overstate the importance of electric guitar in shaping American popular music over the last half-century. Its introduction was a revolution, changing the course of modern musical styles. Today, when we think of the guitars that started the revolution, we think of the Stratocaster and the Les Paul, guitars held against the body and fretted with the fingertips. But the real spark of this musical mutiny was the lap-steel guitar.
In the early 20th century, guitar music was moving out of the parlors of homes and into public spaces where folks could gather together and dance. Guitarists needed to project their sound far beyond where their wimpy little acoustic instruments could reach. Instrument manufacturers began experimenting with larger body sizes, metal construction, and resonators to increase volume.
Around this time, George Beauchamp began experimenting with electric guitar amplification. He settled on a design using two U-shaped magnets and a single coil of wire. Beauchamp was in business with Adolph Rickenbacker, and they decided to stick this new invention into a lap steel.
If we put on our 1930s glasses, this decision makes perfect sense. The most popular music at the time was a blend of Hawaiian and jazz styles made famous by virtuosos like Solomon āSolā HoŹ»opiŹ»i. Photos of HoŹ»opiŹ»i with a metal-body resonator aboundāone can imagine his relief at being handed an instrument that projected sound toward the audience via an amplifier, rather than back at his own head via resonator cones. Beauchamp and Rickenbacker were simply following the market.
As it turned out, the popularity of Hawaiian music gave way to swing, and electric lap steels didnāt exactly take the world by storm. But Beauchamp and Rickenbacker had proven the viability of this new technology, and other manufacturers followed suit. In 1937, Gibson created a pickup with magnets under the strings, rather than above like Beauchampās.
āWhen I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christianās smooth, clean tone. But what I got was meatierācloser to what I associate with P-90s: warm and midrange-y.ā
The first page of Gibsonās āElectrical Instrumentsā section in the 1939 catalog features a glowing, full-page write-up of their top-of-the-line lap steel: the EH-185. āEverything about this new electric Hawaiian Guitar smacks of good showmanship,ā effuses the copy. āIt has smoothness, great sustaining power, and an easy flow of tone that builds up strongly and does not die out.ā
Picking up the 1940 EH-185 at Fannyās House of Music is about as close as one can get to traveling back in time to try a new one. It is just so clean, with barely any dings or even finish checking. Overall, this is a 9/10 piece, and itās a joy to behold. Speaking of picking it up, the first thing you notice when you lift the EH-185 out of the case is its weight. This is a much heavier instrument than other similar-sized lap steels, owing to a length of thick metal between the body and the fretboard. The catalog calls it āHyblum metal,ā which may be a flowery trade name for an early aluminum alloy.
This 1940 EH-185 is heavier than other lap steels in its class, thanks to a length of metal between its fretboard and body.
Photo by Madison Thorn
There are numerous other fancy appointments on the EH-185 that Gibson didnāt offer on their lesser models. Itās made of highly figured maple, with diamond-shaped decorations on the back of the body and neck. The double binding is nearly a centimeter thick and gives the instrument a luxurious, expensive look.
Behind all these high-end attributes is a great-sounding guitar, thanks to that old pickup. Itās got three blades protruding through the bobbin for the unwound strings and one longer blade for the wound strings. When I plugged in the EH-185 I expected to hear something reminiscent of Charlie Christianās smooth, clean tone. But what I got was meatierācloser to what I associate with P-90s: warm and midrange-y. It was just crying out for a little crunch and a bluesy touch. Itās kind of cool how such a pristine, high-end vintage instrument can be so well-suited for a sound thatās rough around the edges.
As far as electric guitars go, it doesnāt get much more vintage than this 1940 Gibson EH-185 Lap Steel. It reminds us of where the story of the electric guitar truly began. This EH-185 isnāt just a relicāitās a testament to when the future of music was unfolding in real time. Plug it in, and you become part of the revolution.
Sources: Smithsonian, Vintage Guitar, Mozart Project, Gibson Pre-War, WIRED, Steel Guitar Forum, Vintaxe
Editorial Director Ted Drozdowskiās current favorite noisemakers.
Ted Drozdowski - Editorial Director
My favorite is my Burns Buzz, a stomp custom-made for me by Gary Kibler of Big Knob Pedals. Gary specializes in recreations of old circuits, and this Burns Buzzaround-inspired box has four germanium NOS transistors and sounds beautifully gnarly. It improves on the original, which Robert Fripp favored in early King Crimson, by adding a volume control. I went a little stir-crazy acquiring fuzzes during Covid lockdown and now have an embarrassing amount. My other current darlings are a SoloDallas Orbiter (which balances fuzz with core-signal clarity), a Joe Gore Duh (a no-nonsense, 1-knob dirt shoveler), and my Big Knob Tone Blender MkII 66, which taught me how smooth and creamy fuzz can be with carefully calibrated settings. These pedals allow me to cover all of my favorite fuzz sounds from the past 60 years. I do have one more secret weapon fuzz that only travels to the studio: an original Maestro FZ-1 that I picked up used for about $20 in the early ā90s. Itās banged up but functional, takes two 9V batteries, and is righteously juicy.
Nick Millevoi - Senior Editor
The two greatest fuzzes Iāve ever played are a Pigdog Tone Bender build and a Paul Trombetta Bone Machine. Both experiences will stick with me for decades to come. But creations by those two masters of fuzz come with a price tag high enough to keep my time with those pedals fleeting.
Instead, my favorite fuzz is an inexpensive, mass-produced pedal that hasnāt left my board since I reviewed and subsequently purchased it in 2021: the Electro-Harmonix Ripped Speaker, designed to emulate the distorted tones on ā50s and ā60s records that were created with broken or misused gear.
Retro inspiration is not all it has to offer though. The rip knob, which controls transistor bias, is the star of the show, interacting with the fuzz level to deliver everything from a smooth, mild fuzz to sputtery mayhem that can evoke a faulty channel strip or old tube combo thatās been set ablaze. I prefer to crank the rip knob and feed it to a phaser and slapback analog delay, which gives me a bit-crushed-like gnarliness. Pull back on the rip or add a boost in front of the pedal, and it has a more organic but still gated sound, which, for me, can be just the thing to set my sound apart in a more traditional setting.
For a cool $116, the Ripped Speaker, which seems to fly under most fuzz freaksā radars, might be the special something that complements the rest of your board or just a tone you turn to on occasion. Either way, itās a great deal.
Luke Ottenhof - Assistant Editor
You could give me the most powerful-sounding fuzz in the world, but if it was in a stupid-looking enclosure, I donāt know if Iād give it a second look. This is just how we operate: Vision is the sense we privilege most, even in matters of audio.
Luckily, the most seismic, monstrous fuzz Iāve ever heard also happens to come in a beautiful package. The Mile End Effects Kollaps, built by Justin Cober in Montreal, measures an elephantine 7 3/8" x 4 5/8" x 1 1/2", and its MuTron-meets-ā60s-Soviet aesthetic matches the sounds its guts produce. The Kollaps is modeled after the nasty Univox Super-Fuzz circuit, and carries a few of that pedalās hallmarks, including its use of germanium diodes and midrange boost control. Cober added a switchable Baxandall active EQ circuit, with up to 12 dB of boost and cut to both low and high frequencies. Coupled with the mid-boost toggle, this gives the Kollaps a shockingly broad range of tonality to play with.With the mids off, the Kollaps is jagged and ruthless, a deafening turbojet of upper mids and chest-vibrating lows that yanks me toward the darker, less commercially successful corners of ā90s doom and noise rock. Kicking on the EQ circuit and boosting the lows turns it titanic. With the balance (volume) and expand (gain) controls maxed, the Kollaps starts to live up to its name, crumbling into a thick, overextended chaos in a way more polite fuzz circuits rarely do.
My favorite Kollaps sounds occur when the mids are engaged, for an articulate, deeply textured fuzz sound that retains your attack. Playing with your guitarās volume knob, you can coax a range of EQ profiles and take advantage of the upper- and lower-octave content in the fuzz. With guitar volume lower, you can access some unbelievably emotive and sensitive sounds that still teeter on the edge of chaos and violence. Itās a rich, volatile circuit that gets as close as Iāve heard to a sound and physical feeling Iād call āplanet-destroying.ā
Charles Saufley - Gear Editor
My first fuzz, A Sovtek Big Muff, remains tied for first place among many favorites. The pedalās most famous virtuesācorpulence and sustaināare among the reasons I treasure it. But the way the Sovtek pairs with a Rickenbacker 330 and Fender Jaguar, which were once my two primary guitars for performance and recording, made it invaluable in various projects for a long time. Neither the Ricky nor the Jag are sustain machines, but the wailing mass of theBig Muff makes their focused voices an assetāinspiring tight, concise fuzz phrases, hooks, and riffs as well as articulate chords.
A silicon Fuzzrite clone built by good pal Jesse Trbovich (long-time member ofKurt Vileās Violators) runs second place to the Sovtek in terms of tenure, and is a very different fuzz. Itās a piercing, hyper-buzzy thing, but a perfect match for a squishy 1960s Fender Bassman head and 2x12 I adore. Perversely, I sometimes couple it with a Death By Audio Thee Ffuzz Warr Overload or Wattson FY-6 Shin-Ei Super-Fuzz clone. These tandems create chaos and chance, but sing loud and melodiously tooāat least when Iām not intentionally bathing in feedback. The Jext Telez Buzz Tone, a clone of the mid-ā60s Selmer circuit, is often my go-to now. Itās a low-gain affair compared to the other fuzzes here, and I use it in its even-lower-gain (and vintage-correct) 3-volt setting. Itās pretty noisy, but it is thick, dynamic, detailed, raunchy, and plenty trashy when the occasion demands it. Itās also a very cool overdrive when you back off the gas.Jason Shadrick - Managing Editor
I rarely need fuzz in my everyday gigs, but it's one of the most fun effects to explore when I'm noodling around. At a NAMM show a few years ago I plugged into Mythos' Argo and as soon as I hit a note my eyes lit up. The sound of the fuzz wasn't unwieldy or hard to manage. It gave me the illusion of control while the octave was the magic dust on top. I knew right then I wasn't leaving the show without one. After I spent some time with it, I became enamored by how much more the Argo can do.
It's inspired by the Prescription Electronics C.O.B. (Clean Octave Blend), so the control set is similar. The octave is always present in the signal path, but you can dial it out with the blend knob. The fuzz and volume knobs are self explanatory, but dialing the fuzz and octave knobs all the way down gives you a killer boost pedal. I find my favorite settings are at the extremes of the fuzz and blend ranges. Typically, both are either all the way up or all the way down. Another great experiment is to turn the fuzz down and then pair it with a separate drive pedal. And in octave mode, Argo is one of those pedals that inspires you to head directly for the neck pickup and stay above the 12th fret.
One of the reasons classic Queens of the Stone Age tracks leap from radio speakers like striking vipers is because Josh Homme is a true recording artistāan individual that chases and realizes the sounds in his mind by any means necessary. When you play the 10-watt, solid-state Peavey Decade Too with Homme and QOTSA in mind you understand why the original Peavey Decade became integral to that process. Itās feral, present, nasty, bursting with punky attitude, and when tracked and mixed with a booming bass, sounds positively menacing. But itās also a lovely clean jangle machine that will lend energy to paisley psych pop or punch to a Bakersfield Telecaster solo.
Objectively speaking, if youāve played an ā80s Peavey practice amp before, you will know many of these sounds well. (Many of my own early amplified experiences came courtesy of a borrowed Backstage 30, so they are etched deep in my marrow and consciousness.) Like any small amp with a little speaker and cabinet, itās marked by an inherent, pronounced midrange honkāno doubt, an ingredient that Homme found appealing in his original Decade. The saturation is thick and surprisingly dimensional. But itās the 3-band EQ, with added bass and top-end boost buttons, that really extends the versatility of the Decade Too. In many contexts, it made a cherished vintage Fender Champ sound like a one-trick pony. The Decade Too may not excel at cooking-tubes-style distortion, but in terms of punch, clarity, and versatility in the studio environment, it delivers the goods.
Peavey Josh Homme Decade Too 10-watt 1 x 8-inch Combo Amplifier
