
Photo 1
After replacing or upgrading a nut, finish the job with fast-acting cyanoacrylate adhesive.
In my previous column (“Using Super Glue in Guitar Repair”), we explored techniques for using fast-acting adhesive to seat frets and secure a string nut. We’re not quite done with this topic, but before we put super glue to work on another project, please take a moment to review the safety tips I outlined last time around. As I mentioned before, super glue can be your best friend or worst enemy, so before you start slinging the cyano, it’s important to refresh your memory of these crucial dos and don’ts. Right? Thought so.
String nut touch-up.
Super glue is handy for making small repairs to a guitar’s finish. Here’s an example: Most guitars have a little finish at either end of the string nut to create a smooth transition between the edge of the fretboard or binding and the nut itself. But after replacing the string nut—let’s say you’ve upgraded from a plastic nut to one made of bone—there’s usually a small edge or drop off where the nut meets the fretboard (Photo 1). As you may recall from our prior column, super glue is available in a variety of thicknesses. To smooth out the transition between the nut and where it joins the fretboard, you can fill that area using a few drops of medium viscosity or gel-formula super glue.
Make sure the area around the edge of the string nut and binding is absolutely level, because you don’t want the glue to pool on one side of the nut edge and create more work for you later.
But wait, there’s more! It’s common for the binding on older guitars to turn yellow over time. Stewart-MacDonald sells an amber-tinted formula that matches this aged look nicely. (Stew-Mac also offers tinted super glues in white and black, which can come in handy for other finish touch-up projects.) If your guitar has binding, using tinted medium super glue will accomplish two goals: You’ll fill the edges around the ends of the replacement nut and help it blend in with the binding.
Assume the position.
First, place the guitar on its side so the neck is horizontal to the workbench and one end of the nut faces up, the other down. To prevent an electric guitar or bass from tipping over, I use a quick release clamp on the body to stabilize it. Because acoustics have a thicker body, they’ll typically stay in place without a clamp. Balance the guitar on its tuner keys, not the neck, and use books or small boxes to support the guitar as it rests on it side. (In our shop, we use leather bags filled with buckshot for this and other stabilizing tasks.)
Make sure the area around the edge of the string nut and binding is absolutely level, because you don’t want the glue to pool on one side of the nut edge and create more work for you later. A bubble gauge comes in handy here.
Apply the glue.
Photo 2
This is where you don your safety glasses. Once the guitar is stable, put a few drops of super glue on the end of the nut and let it dry (Photo 2). You only need to apply enough glue to cover the side of the nut and binding to build a smooth surface where they join together. A medium formula of glue, which is what we recommend, will take several minutes to dry. If you want to speed up the drying process, you can spray super glue accelerant on it. We’ve used GluBoost and NCF Quick brands in our shop, and they both work great.
Having a well-ventilated workspace will reduce accelerant fumes and minimize eye irritation. At the shop, we run a small fan to keep the air circulating when using super glues and accelerants.
Tip: Accelerants can cause what we call the “Swiss cheese effect.” This happens when you prematurely spray the accelerant on the glue. It causes a chemical reaction that results in the glue bubbling up into a white foam, which forces you to scrape away all the glue and start over. To avoid this, wait several minutes before blasting the glue with an accelerator. A little patience will save you a lot of time.
File it down.
Photo 3
When the glue is dry, use a miniature file to gently file away any excess (Photo 3). Do this carefully to avoid damaging the original finish around the nut and binding. The object of the exercise is to file the glue flush with the nut and binding without disturbing the surrounding surfaces.
Sand and buff.
Photo 4
Next, lightly sand the glue-covered area with 600 grit paper to feather it to the edge of the fretboard or binding (Photo 4). Now gently sand it with 1500 grit paper to smooth out any scratch marks.
Photo 5
Finish this job using extra-fine buffing compound and a polishing cloth (Photo 5). I use Planet Waves Restore for this last stage, but you can find other buffing compounds at auto stores or online.
Photo 6
Now step back and admire your work, which should look similar to Photo 6.
After flipping the guitar over on its opposite side, position and secure it (remember to keep the neck perfectly level), and then repeat the process for the other end of the nut.
And that’s it—another task completed, thanks to super glue.
[Updated 1/20/22]
- Guitar Shop 101: Using Super Glue in Guitar Repair - Premier Guitar ›
- Guitar Shop 101: Dealing with a Stripped Truss-Rod Nut - Premier ... ›
- Guitar Shop 101: The Guitarist's Essential Toolkit - Premier Guitar ›
- Guitar Shop 101: Using Super Glue in Guitar Repair - Premier Guitar ›
See and hear Taylor’s Legacy Collection guitars played by his successor, Andy Powers.
Last year, Taylor Guitars capped its 50th Anniversary by introducing a new guitar collection celebrating the contributions of co-founders Bob Taylor and Kurt Listug to the guitar world. The Legacy Collection revives five of Bob Taylor’s classic acoustic models, curated by the legendary luthier and innovator himself. “To imagine that we’re doing guitars that harken to our past, our present and our future all at the same time,” Bob says, “I really like that.”
In developing the collection, Bob preserved the essence of his originals while integrating performance and playability upgrades introduced during his tenure as designer-in-chief. “It’s an up-to-date version of what those guitars would be,” Bob explains, “but with the same sound.”
Visually, these guitars feel classic—clean, understated and unmistakably Taylor. While Bob’s original aesthetic preferences are showcased in his Legacy models, the nod to the past runs deeper than trade dress.
From his earliest builds, Bob favored slim-profile necks because he found them easier to play. That preference set a design precedent that established Taylor’s reputation for smooth-playing, comfortable necks. Legacy models feature slim mahogany necks built with Taylor's patented New Technology (NT) design. “My first neck was a bolted-on neck but not an NT neck,” Bob says. “These are NT necks because it’s a better neck.” Introduced in 1999, the NT neck allowed for unprecedented micro-adjustability while offering a consistent, hand-friendly Taylor playing experience.
What makes this collection unique within the Taylor line is Bob’s use of his X-bracing architecture, favoring his time-tested internal voicing framework over more recent Taylor bracing innovations to evoke a distinctive tone profile. Since Andy Powers—Taylor’s current Chief Guitar Designer, President and CEO—debuted his patented V-Class bracing in 2018, V-Class has become a staple in Taylor’s premium-performance guitars. Still, Bob’s X-bracing pattern produces a richly textured sound with pleasing volume, balance and clarity that long defined the Taylor voice. All Legacy models feature LR Baggs VTC Element electronics, which Bob says “harkens back to those days.”
The team at Taylor thought the best way to demonstrate the sound of the Legacy guitars was to ask Andy Powers, Bob’s successor, to play them. A world-class luthier and musician, Andy has spent the past 14 years leading Taylor’s guitar innovation. In addition to V-Class bracing, his contributions include the Grand Pacific body style, the ultra-refined Builder’s Edition Collection, and most recently, the stunning Gold Label Collection.
Below you’ll find a series of videos that feature Powers playing each Legacy model along with information about the guitars.
Legacy 800 Series Models
First launched in 1975, the 800 Series was Taylor’s first official guitar series. Today, it remains home to some of the brand’s most acclaimed instruments, including the flagship 814ce, Builder’s Edition 814ce and new Gold Label 814e.
The Legacy 800 Series features the 810e Dreadnought and two Jumbos: the 6-string 815e and 12-string 855e. Each model serves up a refined version of the Dreadnought and Jumbo body shapes Bob inherited from Sam Radding—the original owner of the American Dream music shop where Bob and Kurt first met. “I was making my guitars in the molds that Sam had made at American Dream,” Bob recalls. “There was a Jumbo and a Dreadnought. That’s all we had.”
All three Legacy 800 Series guitars feature one of Bob’s favorite tonewood combos. Solid Indian rosewood back and sides are paired with a Sitka spruce top, yielding warm lows, clear trebles and a scooped midrange.
Aesthetic appointments include a three-ring abalone rosette, mother-of-pearl Large Diamond inlays, white binding around the body and fretboard, and Bob’s “straight-ear” peghead design. Both Jumbo models also showcase a mustache-style ebony bridge—a nod to Bob’s early Jumbo builds.
Legacy 810e
The 810 Dreadnought holds a special place in Bob Taylor’s heart. “My first 810, the one I made for myself, was a thrilling guitar for me to make,” he says. “It’s the one and only guitar I played. It didn’t matter how many guitars we made at Taylor, that’s the one I took out and played.” The Legacy 810e brings back that bold, room-filling Dreadnought voice along with the easy playability expected from a Taylor.
Taylor Guitars | Legacy 810e | Playthrough Demo
Legacy 855e
Taylor’s first 12-strings found an audience in 1970s Los Angeles. “I was making guitars that would find their way to McCabe’s in Santa Monica and Westwood Music,” Bob says, “and these guitars were easy to play. Twelve-strings were a popular sound in that music. It was a modern country/folk/rock music genre that was accepting our guitars because they were easy to play. They also liked the sound of them because our guitars were easier to record.” The Legacy 855e, with its resonant Jumbo body, slim neck and gorgeous octave sparkle, carries that tradition forward.
Taylor Guitars | Legacy 855e | Playthrough Demo
Legacy 815e
The Legacy 815e revives Taylor’s original Jumbo 6-string, delivering a big, lush sound with beautifully blooming overtones.
Legacy Grand Auditoriums
In the early 1990s, Bob Taylor heard a consistent refrain from dealers: “Not everybody wants a dreadnought guitar anymore.” Players were asking for something with comparable volume but different proportions—something more comfortable, yet still powerful. This feedback inspired Bob to design a new body style with more elegant curves, more accommodating proportions and a balanced tonal response. The result was the Grand Auditorium, which Taylor introduced in 1994 to celebrate its 20th anniversary.
Thanks to its musical versatility and easy playability, Bob’s Grand Auditorium attracted a wide variety of players. “We came into our own with our Grand Auditorium,” he says. “People were describing it as ‘all around.’ It’s a good strummer and good for fingerstyle, but it’s not totally geared toward strumming or totally geared toward fingerstyle.” Also referred to as the “Swiss-Army Knife” of guitars or the “Goldilocks” guitar, the GA quickly became a favorite among guitarists across playing styles, musical genres and different playing applications including recording and live performance. “That guitar made studio work successful,” Bob says. It gained a wider fanbase with the debut of the “ce” version, which introduced a Venetian cutaway and onboard electronics. “That became one of our hallmarks,” says Bob. “If you want to plug in your guitar, buy a Taylor.”
Today, the Grand Auditorium is Taylor’s best-selling body shape.
The Legacy Collection features two cedar-top Grand Auditoriums inspired by past favorites: the mahogany/cedar 514ce and rosewood/cedar 714ce. Both models incorporate Bob’s original X-bracing pattern for a tonal character reminiscent of their 1990s and 2000s counterparts. Shared aesthetic details include a green abalone three-ring rosette, ebony bridge pins with green abalone dots, a faux-tortoiseshell pickguard and Taylor gold tuning machines.
Taylor Guitars | Legacy 815e | Playthrough Demo
Legacy 514ce
The Legacy 514ce features solid mahogany back and sides paired with a Western Red cedar top, yielding a punchy midrange and dry, woody sonic personality that pairs beautifully with cedar’s soft-touch sensitivity and warmth. It’s a standout choice for fingerstyle players and light strummers who crave nuance and depth. Distinct visual details include faux-tortoise body and fretboard binding, black-and-white top trim, and mother-of-pearl small diamond fretboard inlays.
Taylor Guitars | Legacy 514ce | Playthrough Demo
Legacy 714ce
The Legacy 714ce also features a cedar top, this time matched with solid Indian rosewood back and sides. The result is a richly textured sound with deep lows, clear trebles and a warm, mellow response. Inspiring as it is, this specific wood pairing isn’t currently offered in any other standard Taylor model. Additional aesthetic details include green abalone dot fretboard inlays, black body and fretboard binding, and black-and-white “pinstripe” body purfling.
While the Legacy Collection spotlights Taylor’s past, newer models from the Gold Label, Builder’s Edition and Somos Collections show the company’s legacy is always evolving. Explore the Legacy Collection at taylorguitars.com or visit your local authorized Taylor dealer.
Taylor Guitars | Legacy 714ce | Playthrough Demo
Guest picker Ally Venable
Blues rocker Ally Venable joins PG’s editors to imagine what their dream late-night band would sound like.
Question: What’s your dream late-night show band?
Ally Venable - Guest Picker
By FifthLegend from Eagan, Minnesota, United States of America - Thundercat, CC BY 2.0, https://commons.wikimedia.org/w/index.php?curid=70617212
A: For my late-night show's house band, I’ve assembled a dream team. This ensemble inspires me with their unparalleled musical talents and diverse backgrounds. Chris Layton’s drumming is unmatched and he will provide a solid foundation. I’ll have Jon Batiste on keys. His creativity and energy is boundless. Eric Gales would be on guitar. I love how emotive his music is, and I strive for that type of connection within my playing as well. Finally, I’d have Thundercat on bass. His playing is infused with jazz and funk sensibilities that would tie the whole sound together in an interesting way.
Obsession: My current obsession is shifting my approach to playing—focusing on connection over applause. Instead of chasing technical perfection or crowd reactions, I’m leaning into the emotional and spiritual side of music. It’s about creating moments that resonate deeply, whether it’s with myself, my bandmates, or the audience.
David Saenger - Reader of the Month
A: I love the idea of supergroups and how each of the players would interact. On guitars I would have Nuno Bettencourt (Extreme) and Isaiah Sharkey. My drum and bass combo would be Stewart Copeland (The Police) and Mohini Dey. On keys and sax, I would have Herbie Hancock and Joshua Redman. My male and female vocalists would be Corey Glover (Living Colour) and Liv Warfield (Prince). All of these players are fantastic improvisers and really know how to put on an entertaining show in any genre.
Bassist Victor Wooten
Obsession: My current obsession has been bass. My 12-year-old daughter started playing electric and upright bass about two years ago, and it’s been a blast working with her. I’ve been really focusing on having a solid pocket, and it’s forced me to get better at reading bass clef. I’m taking her to see Victor Wooten next week. Can’t wait!
Jason Shadrick - Managing Editor
Jason Shadrick on the SNL stage.
A: The natural move would be to go for a high-energy party band decked out with multiple keyboards, horns, and vocalists. I’d go a different route. I’d go for a more rootsy vibe with Blake Mills leading a band consisting of Jay Bellerose on drums, esperanza spalding on bass, Bob Reynolds on saxophones, and a rotating guest each week. They could cover lo-fi Americana, funky open-tuned blues, and so much more.
Obsession: This month is slightly less obsession and more reflection as this will be my last issue as Managing Editor for PG. Over the last 15 years I’ve worked on 182 issues, which is kinda mind-boggling. I’ve been lucky enough to do some incredible things during my time at PG, including walking through the host door at SNL and spending a few minutes with Brian May. Never could have imagined it. I am very grateful.
Nick Millevoi - Senior Editor
A: I’ve long said that joining one of the late night bands would probably be my absolute top dream gig. So, if I were choosing my own late-night band, from any era, I would go no further than getting a chance to sit with Paul Schaffer and the World’s Most Dangerous Band or G.E. Smith-era Saturday Night Live Band.
Obsession: The late guitarist Jef Lee Johnson, who spent time in Schaffer’s band, had a heavy resume that included stars of all genres from Billy Joel to the Roots to McCoy Tyner. I got to see him play some low-key gigs around Philly, and each rearranged my molecules. It’s only now, years after his 2013 death, that I’ve become obsessed with his discography. Though much of his work was as a high-level sideman, his albums show the broad range of this masterful guitarist, whose tone, feel, and phrasing conveyed the instrument’s deepest emotional capabilities.
Pick one of these stomps, ranging from silicon-driven to germanium-juiced and beyond, to supercharge your signal.
Keeley Electronics Octa Psi Transfigurating Fuzz
Imagine merging a powerful pitch-shifter, octave generator, and an incredible analog fuzz into one intuitive pedal. The new Octa Psi makes that dream a reality!
$249 street
robertkeeley.com
Wampler Pedals Cryptid Fuzz
This unique circuit is capable of reproducing classic immense fuzz tones, and it’s also easy to create unique new fuzz sounds by dialing in the character control.
$199 street
wamplerpedals.com
StewMac Sun Fuzz Pedal
There have been countless replicas and reimaginations of the classic Fuzz Face pedal and more modern Sun Face over the decades. StewMac’s Sun Fuzz gives you the control and tone shaping you’ve always wanted from the originals. For fans of Hendrix, Clapton, or Gilmour, it’s a must-have.
$99 street
stewmac.com
SoloDallas Orbiter Fuzz
A testament to the expertise and perfectionism that has made SoloDallas a mainstay for over 50 major artists. The unique combination of carbon zinc power emulation, internal impedance control, and external fuzz, gain, and bias produces authentic tones ranging from Hendrix psychedelia to singing “American Woman” fuzz.
$249 street
solodallas.com
Dunlop MXR Hybrid Fuzz
This pedal combines two iconic Fuzz Face distortion sounds—snarling, high-gain silicon and the smooth, shaggy warmth of germanium.
$169 street
jimdunlop.com
Dunlop MXR Super Badass Variac Fuzz
This fuzz is a tonechaser’s dream come true, featuring a Variac control that takes you from vintage dying-battery sag to wide-open saturation.
$149 street
jimdunlop.com
At its core is GTRS’ upgraded G151 intelligent system, offering 128 onboard effects, MNRS amp and cab sims, and even 17 guitar emulations—exclusive to this model. Everything is controlled via the eye-catching Super Knob, which changes color to match your preset, as well as through the Bluetooth-connectible GTRS app.
GTRS’ W902 features select tonewoods and construction: an alder body, poplar burl top, and a sleek bolt-on 5-piece neck made from roasted flame maple and rosewood, with satin natural finish and a rosewood fingerboard. The fanned fret design features 24 white copper frets and a stainless zero fret. A pair of GTRS Alnico V pickups and an HL-II bridge deliver a resonant tone, made particularly versatile thanks to the 5-way tone switch and tone knob.
The W902 offers a truly innovative choice for tech-savvy guitarists. Its features include a wireless transmitter, OTG recording, an 80-second looper, metronomes, and a drum machine, the app-supported guitar boasts up to 12 hours of playtime on a single charge (9 hours with the wireless transmitter in use).
The W902 is an upgraded version of the original W900 Intelligent Guitar, and the W902 most notably features an upgraded GTRS Intelligent Processor System, the G151, which even offers upgrades over the GTRS SL810's recently announced G150 system. The G151 system comes with a staggering 128 effects pre-installed, along with 10 of both MOOER's in-house MNRS amp and cabinet simulation profiles. Exclusive to the W902, the G151 system even includes 17 guitar simulation effects, allowing guitarists to emulate the tonal resonance of some of their favorite guitars.
To activate and browse through presets within the G151 system, which can be connected via Bluetooth 5.0, guitarists can use the guitar's Super Knob, which lights up in different LED colors depending on which preset is activated. Of course, users are able to get stuck into and edit the effects chains of presets through the GTRS app, enabling them to craft their own favorites through their mobile device. The guitar still functions without the G151 system; the Super Knob just needs to be turned off, and the W902 is usable as a regular electric guitar.
Within the GTRS app, there is even an 80-second looper, 10 metronomes, and 40 drum machine grooves built in, providing users with an all-in-one suite for guitar practice and composition. This is especially the case when combined with the W902's OTG-recording support, enabling on-the-go recording without the need for a hardware recording setup.
The W902 comes bundled with a GTRS Deluxe gig bag, three guitar wrenches, a USB 3.0 cable for charging, and a user manual. The guitar even contains a wireless transmitter and an integrated 4000mAh Li-ion battery, providing up to 12 hours of continuous use (9 hours with the transmitter in use), allowing users to enjoy the G151 system through headphones or an amplifier.
Guitarists who want to experiment further with the W902’s technology can connect the intelligent system to the GTRS GWF4 wireless footswitch, which is ideal for switching between presets in live scenarios when control through a mobile device isn't practical.
GTRS W902 Guitar construction features:
- Alder Body, 5-Piece Selected Roasted Flame Maple and Rosewood Neck with Satin Natural Finish (C-Shape)
- Bolt-on neck, 25-1/2" scale length, with dual action steel truss rod
- Rosewood fingerboard, 12” radius, 24 white copper (0 fret stainless) fanned frets
- Built-in wireless transmitter
- Super Knob, Volume Control Knob, and Tone Knob, 3-way tone-selection switch
- GLB-P1 Li-ion Battery (4000mAh, up to 12 hours of continuous use, 9 hours with the wireless transmitter in use)
- USB port for charging and OTG recording
- GTRS Deluxe gig bag, 3 guitar wrenches
GTRS G151 Intelligent Guitar System features:
- GTRS G151 Intelligent Processing System (and GTRS App)
- 128 effects, 10 MNRS amp (GNR) and cabinet (GIR) simulation models
- 17 guitar simulations
- 80-second looper, 40 drum machine grooves, 10 metronomes
- Bluetooth 5.0 connectivity
- GTRS GWF4 wireless footswitch support (sold separately)
The GTRS W902 is now available worldwide. For more information visit www.gtrs.tech.