
Learn the guitar setup used by the Smiths legend, along with different ways to implement it and make it your own.
Welcome back to Mod Garage. This month we’ll take a deeper look inside the Fender Jaguar and what can be done to its wiring to make it more practicable. The 1962 Fender Jaguar is one of the offset outlaw axes and we dipped into this subject some years before in “Mod Garage: Rewiring a Fender Jaguar.”
This time, we’ll focus mostly on the controls of the standard Jaguar, instead of focusing on the numerous switches and additional pots as I covered before. I’m always happy about receiving requests to write something about such guitars, as I really like these outlaw buddies and I don’t think they get the attention they should. So here we go.
Today we’ll dissect the Johnny Marr Jaguar wiring found in the Fender Johnny Marr signature Jaguar model. My PG colleague Charles Saufley recently did a great interview with Johnny Marr, so definitely read it if you want to find out more about him.
The U.K.-born Marr is best known as the guitarist and songwriter behind the Smiths, who redefined and ruled British pop in the 1980s. He’s also known for playing with The The, Modest Mouse, the Cribs, and, of course, his solo work as well as playing on countless sessions. Rolling Stone listed Marr at No. 51 of the 100 Greatest Guitarists and No. 67 on the 100 Greatest Songwriters of All Time. What else can one say?
Sound familiar? It is! The 4-way pickup switch is the 4-way switch from the series Telecaster wiring and the bright switch is the good old mid-tone cut switch (aka “strangle switch”) from the original Jaguar wiring but in a doubled version.
Marr started playing a Fender Jaguar around 2005 and used it during his stay with Modest Mouse, resulting in his signature model, released in 2012. The guitar and its wiring underwent several changes since then, and today we’ll talk about the actual version built by Fender (model #0116400705).
Regarding the electronics, you can spot the differences at first glance: Instead of the typical three switches on the lower-horn chrome plate, the Johnny Marr Jaguar sports a custom chrome plate with a Fender-style 4-position pickup selector switch. On the upper-horn chrome plate, the two additional pots were replaced with a second slide switch in a custom chrome plate, which sports two slide switches. In addition, the guitar has several hardware upgrades, custom-wound pickups, and the original master volume/master tone configuration.
Let’s look under the hood as to what these elements are doing on the Jaguar, here, in Fender’s own words:
Four-Way Pickup Switch:Rather than traditional slide switches, Marr’s signature Jaguar has a special four-way blade pickup switch on the lower horn, delivering the bridge pickup alone, the bridge and neck pickups in parallel, the neck pickup alone, and the neck and bridge pickups in series.
Two “Bright” Slide Switches:In an extra-special design element, the upper horn of the Johnny Marr Jaguar features two slide switches—a “universal” bright switch that kicks everything up a notch or two, and a separate bright switch that only affects the “series” pickup switch position.
Sound familiar? It is! The 4-way pickup switch is the 4-way switch from the series Telecaster wiring and the bright switch is the good old mid-tone cut switch (aka “strangle switch”) from the original Jaguar wiring, but in a doubled version.
In addition to this switching matrix, we find the typical vintage Jaguar master volume/master tone controls under the hood: two 1M audio pots with a 0.01 µF tone cap and a single 56k resistor on the tone pot.
Fig. 1
Before we dissect the wiring in Fig. 1, please note that it’s in an optical simplified version for a much better overview. The two switches are the typical Jaguar on/off switches—the ground of the bridge pickup is connected to common ground and not to the pickup-selector switch, same as for the Telecaster 4-way wiring.
Replacing the pickup switches with a standard pickup-selector switch not only makes operating the guitar a lot easier, but it enables an additional tone a standard Jaguar doesn’t have—both pickups together in series for a very fat and loud lead sound. It’s the same 4-way switch that you all know from the Electroswitch company (formerly Oak Grigsby) that’s used for the Telecaster. The downside of this mod is that you need a new custom chrome plate for the switch, but this type is available from several companies for a decent price. Fitting the switch can be a problem regarding the depth of the routing in the body. I’ve done this modification to several Jaguars, and in all cases I had to reroute the body to make it fit. It’s not a big deal with a good handheld router tool, but you should know about this problem. If you order a new Jaguar body, you should mention that you need a deeper routing at this location, so it’s a trouble-free operation.
Replacing the two additional pots with two switches on the upper horn also means that you need another new custom chrome plate, but this one is also available without any problems. The adaption of two individual strangle switches looks confusing, but, for whatever reason, Marr wants a general one influencing the whole wiring plus a special one only for the pickup position with both pickups in series. I can think of several applications for this wiring but it’s a matter of personal choice and preferences. If you have the playing chops of Marr, you’ll sound excellent with every guitar and every wiring inside. Us mere mortal pickers need some support from the wiring, so it’s no crime to mod it, but more about this later. In general, the bright or strangle switch uses a 3000 pF cap forming a fixed high-pass filter. In other words, it cuts bass, so the sound gets much brighter.
Using two 1M audio controls for master volume and master tone follows in the heritage of the Jaguar, same as for the single 56k resistor on the tone control together with the 0.01 µF tone cap. Nothing new here.
The combination of all this works, at least for Mr. Marr. But let’s break it down in sections.
The 4-way switch we all know from the Telecaster 4-way mod works perfectly and is a great addition to any guitar with two pickups, not only for a Jaguar. The switching order is the same as on the Telecaster (bridge only / bridge+neck in parallel / neck only / bridge+neck in series), so it feels like home. I don’t think there’s a useful variation for this mod: It’s perfect the way it is.
It’s up to you if you need a strangle switch, or if you need two of them. I think you should give it a try and play it for some time to see if you like it. Personally, I don’t need or like this feature, and in my own Jaguar I would use the two switches to add a kill-switch and phasing like we did with the Duo Sonic guitar in 2021. The series feature is already present in the Marr wiring, so the second switch would be my kill switch in this wiring. You can also tinker with the value of the bright caps on the two switches. Reasonable values would be from 1000 pF up to 6800 pF and everything in between. I think Marr’s concept behind the two switches was that he wanted to play a fat rhythm part without the bright switch, but when switching to solo mode (both pickups together in series) the sound gets very loud and fat and the dedicated bright switch helps to cut through the mix in this situation. So, it’s a kind of preset sound you can dial in—a concept that has tradition at the Fender company.
I really like 4700 pF on a Jaguar to dial in some fine nuances of warmth.
Regarding the two pots using 1M audio pots, this strictly follows the Jaguar vintage route and is boon and bane at the same time. The benefit is that with the pots fully opened, they’re close to a no-load pot with full high end. The downside is that in the Jaguar’s pure passive system the useable range of the pots is close to zero, acting like an on/off switch rather than a useful control with an effect over the whole rotation of the pot. Personally, I would change out both pots for two 250k audio pots or a 250k volume and 500k tone pot if you want a tad more high-end. The useable range is much better compared to the 1M pots, but this is also a matter of personal choice. Marr seems to like it, so it’s worth a try.
The standard volume control is perfect the way it is. I would add a treble-bleed network to keep some treble alive when rolling back the volume. For more info about this please have a look at “Mod Garage: Deep Diving into Treble-Bleed Networks.”
And last, the tone control. Choosing a 0.01 µF tone cap clearly shows the Jaguar was not designed for dark jazzy tones and that the tone should still have some good portion of treble when using the tone control. A 0.01 µF cap is a good choice, but if you need darker tones, go up to 0.015 or 0.022 µF and beyond. If 0.01 µF is still too dark for you, go down to 6800 pF and beyond. I really like 4700 pF on a Jaguar to dial in some fine nuances of warmth.
The 56k resistor on the tone control is a wired construction and there has been countless debates about it for decades. The physics behind it are very complex and I think Fender wanted to offer something new and versatile, but, as it often goes, the road to hell is paved with good intentions. Meaning, it works on the drawing board but not so good in reality. In very simplified words, it’s a mixture of limited tone control and a little bit of Gibson ’50s wiring. With the tone control fully opened, everything is normal and as you know it from other guitars like a Strat or Tele. When you start to close the tone pot, the 56k resistor is slowly pushed into the signal path, forming a low pass together with the 0.01 µF cap, resulting in attenuating the tone and the resonance peak. With the tone pot fully closed, it acts like a ’50s wiring and there is no resonance shift.
It’s not a bad design per se—some like it while others don’t. An interesting detail is that when you start to close the tone pot, the pickup’s inductance will be decoupled from the cable capacitance, resulting in a glassy and ice-picking tone, and I think this was exactly what the Fender designers had in mind. In reality, this effect is completely offset because of the following high-end roll-off caused by the guitar electronics. Maybe Fender wanted to try something new, putting as many tonal features as possible into the Jaguar. It shall remain a secret and a mystery.
I would remove the resistor and rewire volume and tone as in a standard Telecaster for a traditional control. Give it a try and see if you like the Jaguar method better. Who knows? You can also experiment with the 56k resistor; reasonable values are from 22k up to 100k.
That’s it for now! Next month we’ll cover something you’ve asked for a lot: a mod for both electric and acoustic guitars to enhance tuning stability.
Until then ... keep on modding!
- Mod Garage: Rewiring a Fender Jaguar - Premier Guitar ›
- Vintage Vault: 1966 Fender Jaguar - Premier Guitar ›
- Fender Johnny Marr Signature Jaguar Guitar Review - Premier Guitar ›
- Modifications for a Gretsch Guitar Circuit - Premier Guitar ›
- Johnny Marr Signature Martin Guitar Acoustic-Electric Models - Premier Guitar ›
There’s so much to explore when you decide to dip your toes into altered tunings.
There’s so much to explore when you decide to dip your toes into altered tunings. The jangly beauty of DADGAD and the new shapes found in open E and open C offers new inspiration. Caitlin Caggiano teaches you not only the easiest way to get into these tunings, but also a few handy shapes that will kickstart your playing today.
Club- or festival-provided stage amps can be hellish or angelic. Here are some of the devils and angels Premier Guitar’s editorial director has encountered along the road.
I have a slight allergy to backline amps. I shouldn’t, because I’ve played through a lot of them at clubs and festivals over the years, and most of my experiences have been fine, but I think a few bad combos and unfathomable heads put me off to a degree I can’t quite shake.
One of the first times I got the backline shivers was in the ’90s at a New York City club gig supporting John Sinclair, where I was told we would not need to bring amps. Awaiting me was a severely scarred Peavey Bandit combo with nary a knob left on its face, and the EQ and pre gain didn’t even have posts left. I just twisted a few stumps and gave up on the rest. How was the sound? Like an amplified fluorescent light bulb. On the other hand, I’ve never met a backline Peavey Classic series amp I didn’t like. Or, really, almost any backline amp that got the TLC it deserved, along with the heavy use. I once plugged into a right-out-of-the-box amp delivered to a club in Geneva by a then-emerging European manufacturer that sounded great during soundcheck, but its transformer died on the first chord of the first song in my band’s set. Luckily, they’d sent two, so we had to stop, open a box, mic the new amp, and jump back on the horse.Another case: I like a little drive, so imagine my dismay to find a backline at a satellite tent at a major festival with zero master volume amps. At the time, I wasn’t using effects—just a Strat and a Tele. So I plugged into a big blonde Fender and just turned up. The stage volume was brutal, but I had my tone so it was great. At least for me. I hope the drummer who played with me that day can still hear.
Sometimes, even speccing the backline doesn’t help. While playing a series of gigs in France, I requested either Vox or Marshall amps, such as an AC30 or JCM800, and at one big stage I encountered a fresh-looking JCM 2000 Triple Super Lead atop a 4x12. I must confess, I took one look at both decks of buttons and push-pulls and my heart sank. I was out of my comfort zone at the time. Try as I might, I could not get anywhere near the mocha, mid-ripe sound I get out of my ’72 Super Lead without turning up to a stratospheric level. I felt terrible. Not for the audience. It was an outdoor stage with plenty of open space. But for the stage crew. When one of them shouted, “Ted, es-tu psychotique?” between songs, I didn’t need to consult Google Translate to know what he meant. I was embarrassed and regretful about the volume, but had a great time playing, nonetheless. (Sorry, crew!)
“Awaiting me was a severely scarred Peavey Bandit combo with nary a knob left on its face, and the EQ and pre gain didn’t even have posts left.”
Over this summer I played a voter registration benefit, and the large venue that held it sent a really appealing backline list, with a Deluxe and a DeVille included. When I got there, there was a Deluxe but no other guitar amp per se. I had to play through a bass amp, and it was okay, thanks to my pedals, but a decidedly less-than-magical experience.
I feel like I’m whining, but like most of you I’ve spent years chasing a particular tone, and when I have my own rig it’s as delicious as German chocolate cake. So maybe I’m spoiled. And there are some backline amps I’ve coveted at gigs—like the humble Blues Junior at Nashville’s Eastside Bowl that’s been upgraded with a Deluxe transformer. It speaks eloquently.
There have been many other funky, hard-to-manage (at least for me) backline amps I’ve wrestled with over the years. After all, I’ve played in a lot of juke joints and roadhouses. And I used to sweat about it. But I finally made my “whatever” peace with backlines thanks to some advice from Luther Dickinson: “No matter what an amp sounds like, you have to stay out of your own head.” Just let the music fly.
In that spirit, two of this issue’s gear features deal with backlines. One is a public service: If you’ve never played through a backline, here’s what you should expect; or if you’re putting one together, as I’ve had to do many times, here’s what to consider. The other piece polls eight heavyweight guitarists on their own backline gear specs—lending insight on how established pros ensure that they sound like themselves under any circumstances.
So, if stage life throws you a lemon for an amplifier, just plug in and make it as juicy as you can. Don’t worry, because there’s another gig down the pike where you’ll sound exactly like yourself.
Two Notes Unveil the Next Giant Leap in Their Reactive Load Box Legacy With Reload II
Introducing Torpedo Reload II - Two Notes Audio Engineering's latest groundbreaking reactive load solution, featuring twin-channel operation, multi-impedance compatibility, and continuous attenuation. With a Celestion® Approved Load Response and 215W per channel power amplifier, Reload II redefines backline control.
Two Notes Audio Engineering, the world's leading innovator and manufacturer of load boxes, attenuators, and digital cabinet emulators, has just announced Torpedo Reload II - The latest installment in Two Notes’ class-leading reactive load solution legacy marking the definitive watershed in contemporary backline control.
Featuring twin-channel operation, selectable multi-impedance compatibility, and true continuous attenuation, Reload II is Two Notes’ most advanced Load Box to date. Its mission is simple: unleash the power of any amplifier or line-level source without compromise. Armed with a ground-up rework of their defining reactive load for a Celestion® Approved Load Response, the match is set to drive any amp’s power stage (rated up to 200W RMS) to perfection, retaining all the sonic integrity your performance demands. Scalable from a whisper to a full-throttle onslaught, Reload II’s ultra-transparent dual-mono 215W (per channel) amplifier/attenuator and paired speaker outputs preserve every facet of your tone. Add a Stereo FX Loop, dual Line outputs, and GENOME Reload II Edition (software download) into the mix and Reload doesn't just enhance your rig, it redefines it.
“When it came to developing Reload II, it was obvious this couldn't be a run-of-the-mill update of its predecessor. Fuelled by an ethos rooted in continual redefinition of contemporary backline control, we set our sights on a ground-up rework of our defining reactive load. The results speak for themselves: hands-down the best-in-class impedance match available on the market to date and the first reactive Load Box to feature an industry first Celestion® Approved Load Response.” Said Guillaume Pille, Two notes CEO. “Whether it’s a tube amp, a line level source, or even both simultaneously, all the hookup flexibility you demand from a Two Notes product is here. Throw a 215W (per cab output) power amplifier into the mix, and you’re primed with everything from studio-friendly silent loadbox operation to mainstage-ready source amplification. If that wasn't enough, there’s a suite of expertly-tuned tone-shaping tools - plus a super-versatile Stereo/Dual Mono FX loop - that all combine to make Reload II our most adaptable solution to date. The next generation of our Reactive Load legacy has arrived. It’s now up to you to reimagine your backline with everything the Two Notes ecosystem has to offer!
Reload II is now available for pre-order from Two Notes stockists worldwide, scheduled for shipping Q1 2025. At launch, Reload II ships with the following MAP / MSRPs
US: $999.99 (MAP)
Euro: 999.99€ (MSRP)
GBP - £849.99 (MSRP)
For more information, please visit two-notes.com.
Introducing Torpedo Reload II - YouTube
On That’s the Price of Loving Me, “We’re Not Finished Yet” is a love letter to Wareham’s 1968 Gibson ES-335.
The singer-songwriter-guitarist, known for his time with indie rock heroes Galaxie 500, Luna, and Dean & Britta, reunites with producer Kramer on his latest song-driven solo effort, That’s the Price of Loving Me.
“You want there to be moments where something unexpected hits you,” says Dean Wareham. “They’ve done studies on this. What is it in a song that makes people cry? What is it that moves you? It’s something unexpected.”
The singer-songwriter, 61, has crafted many such moments—most famously during the late ’80s and early ’90s, helping cement the dream-pop genre with cult-favorites Galaxie 500. Take the tenor saxophone, by Ralph Carney, that elevates the back half of “Decomposing Trees” from 1989’s On Fire, or the Mellotron-like atmosphere that bubbles up during “Spook” on This Is Our Music from 1990—both of which, notably, were recorded with journeyman producer Kramer, who’s part of Wareham’s rich sonic universe once again with the songwriter’s new solo album, That’s the Price of Loving Me.
Following This Is Our Music, the final Galaxie 500 album, Wareham and Kramer went their separate ways. The former founded the long-running indie-rock band Luna, formed the duo Dean & Britta with now-wife Britta Phillips, worked on film scores, and released a handful of solo projects. Kramer, meanwhile, grew into a hero of experimental music, playing with and producing everyone from John Zorn to Daniel Johnston. They stayed in touch, even as they drifted apart geographically, and always talked about working together again—but it took the weight of mortality to make it happen.
“[Kramer has] been saying for years, ‘It’s crazy we haven’t made a record together,’” says Wareham over Zoom, his shimmering silver hair flanked in the frame by a wall-hung cherry red Gibson SG and a poster of Rainer Werner Fassbinder’s 1975 drama Faustrecht der Freiheit. “He was living in Florida, and I was living elsewhere and doing other things. But I did lose a couple of friends over the pandemic, and it did occur to me, you can’t just say, ‘I’ll get to it’ forever. Not to be morbid, but we’re not gonna be here forever. We’re not getting any younger, are we?”
Dean Wareham's Gear
Wareham was a member of the early indie dream-pop trio Galaxie 500. After their split, he formed indie rock stalwarts Luna as well as Dean & Britta, with wife and Luna bandmate Britta Phillips.
Photo by Laura Moreau
Guitars
Amps
- Lazy J 20
- Mesa/Boogie California Tweed
Effects
- EAE Hypersleep reverb
- EAE Sending analog delay
- Dr Scientist Frazz Dazzler fuzz
- Danelectro Back Talk
- Joe Parker Raydeen overdrive
Strings, Picks, and Accessories
- Curtis Mangan nickel wounds (.010–.046)
- Dunlop Nylon .88 mm picks
- Truetone 1 Spot Pro CS12
In 2020, Dean & Britta recorded a covers album, Quarantine Tapes—the perfect opportunity, amid the agony of lockdown, to finally get Kramer involved. The producer mixed their hazy version of the Seekers’ “The Carnival Is Over,” which planted the seeds for a bigger collaboration on That’s the Price of Loving Me. At first, though, Wareham didn’t have any songs, so he gave himself a hard deadline by booking some time at L.A. studio Lucy’s Meat Market.
“What is it in a song that makes people cry? What is it that moves you? It’s something unexpected.”
“I don’t write songs every day—sometimes I don’t write songs for a whole year or something,” he says with a laugh. “The only thing that gets me to do it is booking studio time. Then I have to write some songs because it’ll be embarrassing if I show up with nothing.”
The space itself—decked out with a jaw-dropping amount of vintage guitars and amplifiers and keyboards—helped animate his sleepy-eyed and gently psychedelic songs. “I thought I had a few nice instruments,” Wareham says, “but I showed up, like, ‘Oh, your Les Paul’s from 1955? I think I’ll play this one. Your Martin is from the ’40s?’” Speed and spontaneity were essential: They worked six full days, with Kramer guiding him to capture every performance without overthinking it.
Wareham’s latest was produced by Kramer, a former member of Shockabilly, Bongwater, and the Butthole Surfers who owns the legendary underground label Shimmy-Disc. He produced all three Galaxie 500 LPs.
“[That’s] how I worked with Kramer back in the day too,” he recalls. “Maybe it kinda spoiled me—he was always like, ‘Yep, that’s it. Next!’ I got lazy about going back and redoing things. We’d make the decision and move on: keep that drum track and bass track. Maybe Britta [bass, backing vocals] would change a few things. Sometimes you’re with people who think every single thing should be replaced and made perfect, and you don’t actually have to do that. When it came time for me to overdub a guitar solo or something, Kramer would just allow me two takes generally: ‘Do it again a little differently. That’s it. That’s good.’”
“I thought I had a few nice instruments, but I showed up, like, ‘Oh, your Les Paul’s from 1955? I think I’ll play this one.’”
The material itself allowed for such malleability, with ringing chord progressions and gentle melodies often influenced by the musicians who happened to be gathered around him that day. “You Were the Ones I Had to Betray” has the baroque-pop sweetness of late-’60s Beatles, partly due to the sawing cellos of L.A. session player Gabe Noel, who also added some boomy bass harmonica to the climax. “It’s an instrument you’d mostly associate with the Beach Boys, I guess,” Wareham says. “It kinda sounds like a saxophone or something.”
Wareham, his 335, and Mesa/Boogie California Tweed at a recent Luna show, with bassist Britta Phillips in the background.
Photo by Mario Heller
It’s easy to get wrapped up in the warm hug of these arrangements, but it’s also worth highlighting Wareham’s lyrics—whether it’s the clever but subtle acrostic poetry of “The Mystery Guest” (“I’d never done that before, and it’s not that hard to do actually. Sometimes it’s just to give yourself a strange assignment to get yourself thinking in a different way”) or the hilarity of “We’re Not Finished Yet,” which scans as carnal but is actually a love letter to his semi-recently acquired 1968 Gibson ES-335.
“Sometimes it’s just to give yourself a strange assignment to get yourself thinking in a different way.”
“I read this poem about a guy polishing an antique wooden cabinet or something,” Wareham explains. “I thought, ‘That’s funny—it’s vaguely sexual, how he’s like rubbing this thing.’ I thought it would be funny if I wrote a song not about a piece of furniture but about the guitar—the experience of buying this. The lyrics in there: ‘I waxed you; I rubbed you; I reamed you.’ It all sounds like a dirty song, but it’s like, ‘No, I had to get the peg holes reamed!’ It works kind of as a love song, but that’s what it’s really about.”
Which brings us back to that idea of the unexpected. The most beautiful touches on Loving Me, crafted with his ol’ producer pal, are the ones that appear out of nowhere—like the blossoming guitar overdubs of “New World Julie” and “Dear Pretty Baby.” Kramer, he says, liked to “run two or three guitar tracks at once, where it becomes a symphony of guitars.”
These surprises, indeed, are the moments that stick with you.
YouTube It
Luna’s four-song performance on KEXP showcases Dean Wareham’s sparse, low-key indie rock vibe as well as his simple and sweet guitar embellishments.