
Joystick control and three reverb algorithms unlock seemingly infinite combinations of reverb and distortion.
Articulate distortion with killer fuzzy edges. Deep, inspiring reverb algorithms. Relatively free of digital artifacts and cheesy overtones.
No presets. Joystick is way too easy to knock out of place in performance. Hard to get back to precise settings.
$299
Walrus Melee
walrusaudio.com
Artists have used guitar effects for instruments other than guitar for a long time. And with a joystick taking center stage on the enclosure, Walrus’ Melee, which combines three reverb algorithms and a distortion circuit, looks like it was designed in explicit acknowledgement of that fact. You see, it’s not easy to control a joystick precisely with your foot. So, the presence of the joystick—which blends distortion and reverb in seemingly infinite combinations—makes the pedal seem intended as much for use by synth, laptop, and keyboard artists as guitar players.
That may be true. But even if it were fact, it would do nothing to diminish how cool the Melee is as a pure guitar effect. Melee’s distortion is rich and often old-school fuzzy. Its three reverb algorithms—ambient, octave-down, and reverse reverb with feedback—are awesome, too. And with switches to change effect order, alter decay time, and select EQ emphasis, the tone-shaping options are many. But it’s the joystick that makes the Melee extraordinary and makes it such a deep well of possibilities.
Free-Form Interactions
Walrus’ Melee is far from the first joystick-controlled effect pedal. Walrus already has a dual-joystick fuzz/tremolo in its line in the Janus. A prototype of former Premier Guitar editor Joe Gore’s excellent Filth Fuzz used a joystick before he recognized the perils of fuzz-crazed users stomping it to death. Visionary companies like Devi Ever and Dwarfcraft have also given the joystick a go.
“The distortion is remarkable. It’s articulate and communicates individual string detail clearly, even at high-gain settings.”
Though unorthodox, Melee’s use of a joystick-centered design is a relatively elegant application. The only potentiometer is the master output volume. Situated below the master volume, there are three toggle switches. The topmost toggle controls the tone profile of the pedal—switching between progressively less bright settings. Curiously, the least bright setting is situated in the middle position, and a rotary knob might have been more effective here. Even so, the three EQ voices work well within the context of the fuzz voice. The middle toggle selects the range of reverb decay. It’s essential, given how expansive the Melee’s reverb can sound. And while the longest decay setting is incredibly fun, the shortest decay range can be indispensable at extreme fuzz settings. (The decay switch, by the way, can also be re-purposed to select reverb modulation level by holding down the bypass footswitch.) The third toggle re-orders the reverb and distortion effects, and it vastly expands the Melee’s range of sounds. I love the hazier, more mysterious textures of situating the reverb before distortion. Players that like more precision and control over picking dynamics might prefer the distortion in front.
The already impressive range of sounds afforded by those controls is made exponentially larger thanks to the very sensitive joystick. Pushing the joystick along its vertical axis increases the distortion gain. Moving it from left to right increases the reverb mix. The spaces in between are home to many blends of the two effects, and interacting with the control is a satisfying process akin to shaping clay.
Cross-Pollination Yields Beautiful Fruit
As cool as Walrus’ interface is, it’s only as good as the effects behind it. The distortion is remarkable. It’s articulate and communicates individual string output clearly, even at high-gain settings. But it can also sound searingly fuzz-like—evoking mid-’60s classics like the Fuzz-Tone and Fuzzrite. That combination isn’t easy to find. And Melee’s ability to walk the line between those two worlds is impressive. It’s also critical when working with reverbs as intense as the Melee’s can be.
Each of the Melee’s reverb algorithms is distinct and powerful. The reverse reverb with feedback was a logical launching point for me, given my own My Bloody Valentine predilections. And many settings uncannily evoke MBV sounds—particularly with the joystick in the upper-right quadrant or in the shallower reaches of the upper-left quadrant. Unlike a lot of reverse reverbs, the Melee’s feels fluid and cohesive. Shoegaze devotees would serve themselves well by investigating the Melee for this function alone.
The ambient reverb setting seems mostly free of the cloying high-octave tonalities that can evoke bad TV dramas. Instead, Melee’s ambient reverb setting is more cave-like in its reflections, which meshes nicely with the fuzz at long decay settings, but also creates a nice wash in the trail of heavy fuzz at low decay settings. The octave-down algorithm, meanwhile, will thrill any composer who loves to incorporate doomy, fractured textures as a bed for slow melodic movements. It also delivers treats like haunting, dolorous foghorn tones that sound magnificently terrifying coupled with deep, slow vibrato dives.
The Verdict
Melee is an overflowing source of sound and texture. How well it works for you as a guitar effect depends on your style and mode of performance. Experimental guitarists that work outside the performance constraints of footswitch-activated effects and can situate the Melee on a tabletop, stool, or, heck, a fancy, ceremonial side-stage plinth, will delight in the hands-on nature of the pedal’s interface. More kinetic stage performers may have a hard time avoiding accidental displacement of the joystick.
Melee’s most promising guitar applications probably exist in the realm of non-traditional rock stage presentation and in the studio, where the Melee’s intuitive functionality can be explored more freely. But in any situation where you can make the Melee’s idiosyncratic design work for you, its brilliant fuzzy distortion and varied and expansive reverb voices make it a tone-crafting asset with huge potential.
Walrus Audio Melee Wall of Sound Demo | First Look
- Intro to MIDI for Pedalboards ›
- Got Noise Issues? It Could Be Your Pedalboard's Power Supply ›
- Pedal Troubleshooting and Maintenance 101, Part 3 ›
Orange Amplification announces the arrival of its new Babies: the newly analogue designed Dual Baby, Tour Baby and Gain Baby guitar amps, plus the O Tone combo.
The Babies
Each lightweight, studio grade 100W, twin channel, Class A/B, solid state amp weighs only 3kg and is compact, reliable and tour ready. Watch the launch video here.
The 2-channel, Tour Baby guitar amp is incredibly versatile in a variety of playing situations. The onboard studio grade VCA compressor of Tour Baby’s refined clean channel, offers pristine clean tones with active or passive pickups. It provides a consistent dynamic range and low noise in extreme settings without the need for separate pedals. It includes precise bass and treble EQ controls.
The naturally voiced dirty channel of this tone machine allows players to easily get that sought after ‘point of breakup’ sound . A custom voiced presence control and powerful 3-band EQ control means the Tour Baby’s tone can be shaped to cut-through the mix. Add to that a footswitchable volume control, that provides a stage-friendly volume boost option for live applications. Watch the Tour Baby video here.
The Gain Baby clean channel is the same as that of the Tour Baby with its integrated VCA Compressor to alleviate the need for an additional stomp box and incorporates bass and treble EQ controls to dial in a desired frequency. The compressor provides smooth, transparent compression for dynamic control without compromising tone.
Four distinct stages are available on the high gain channel allowing players to dial in their preferred level of crunch and saturation. Like the Dual Baby, Gain Baby’s Tight Switch operates as a bright switch, boosting the upper mid at lower gain levels, to give shredding solos a little something extra. Volume control is footswitchable, the buffered FX allows effects from pedals to be patched in and the onboard 3-band EQ allows tone to be tweaked even further.
With multiple output options such as a balanced XLR output with no Cab Sim, as well as dual speaker outputs, the Gain Baby is equally comfortable on stage or in the studio. Watch the Gain Baby video here.
The Dual Baby is a powerhouse in a pint-sized package. It’s simple A and B channel design offers duelling tones and alternating rhythm opportunities. Channel A mimics the rich responsive tones of the Orange flagship Rockerverb amps in a reliable solid-state design. From clean to classic crunch to full-on saturation, there is no shortage of Orange mojo. The brand-new Tubby Switch, which boosts the bottom end early in the signal path, offers a much ‘rounder’ tone when playing clean or when searching for just the right ‘dirty-clean’ sound.
Channel B allows players to dial in the desired level of grit, with ample saturation and a valve-like high-gain tone, unheard of in any other solid-state unit. The ‘bright boost’ of the Tight Switch gives the amp spring and bounce and raises the top end at lower gain levels for players who want to tighten up, shred and play blistering solos with plenty of cut. The 3-band sweepable EQ presence control allows frequencies to be tweaked, shimmer added and mids that sit perfectly in the mix to be dialled in. Watch the Dual Baby video here.
Pack or rack any of the three Baby amps with included gig bag or an available rack ear kit. Each Baby is a mighty unit that delivers100-Watts into 8 ohms or 70-Watts into 16 ohms, to power any full-sized guitar amp with ease!
Check out the triplets, Dual Baby, Tour Baby and Gain Baby and all the other Orange products at
https://orangeamps.com/
The O Tone 40 Combo Amp
Watch the launch video here.
The single channel, 40-Watt Class A/B solid state combo has onboard tremolo and reverb controls, a buffered effects loop and plenty of punchy volume. With a distinctive clean tone, it is an ideal amp for any pedal set-up or a small venue workhorse for guitarists who are fond of warm, vintage tones.
The amp’s bias-wobbled, single-ended JFET tremolo circuit offers huge depth and breadth, delivering everything from grand sweeps to a staccato sonic character via insistent, whirling helicopter patterns. The effect is footswitchable, allowing for even more adaptability during performances.
Modelling a classic spring reverb, the O Tone 40 incorporates a digital reverb module to add a warm spaciousness to sounds, ranging from subtle shimmer to ethereal trails.
The combo’s fully buffered, low-impedance FX Loop allows for any number of effects and cables to be patched between the amp’s input and output sections without sacrificing tone, making it an excellent pedal platform.
The powerful volume of the 12” Voice of the World speaker, combined with the amazingly sweet tones and harmonic chimes of the new O Tone 40, makes it ideal for rock, country, blues and so many more music genres. A direct output is included to facilitate studio and live non-miked situations.
The amp is finished in trademark Orange Tolex with Orange’s signature basket- weave grill and Crest badge. Check out the O Tone 40 and all the other Orange products at https://orangeamps.com/
100 watts of clean-to-dirty power in a slim, light, 2-channel, tour-ready design that's as easy on the billfold as your back.
The 2-channel, Tour Baby guitar amp is incredibly versatile in a variety of playing situations. The onboard studio grade VCA compressor of Tour Baby’s refined clean channel, offers pristine clean tones with active or passive pickups. It provides a consistent dynamic range and low noise in extreme settings without the need for separate pedals. It includes precise bass and treble EQ controls.
The naturally voiced dirty channel of this tone machine allows players to easily get that sought after ‘point of breakup’ sound . A custom voiced presence control and powerful 3-band EQ control means the Tour Baby’s tone can be shaped to cut-through the mix. Add to that a footswitchable volume control, that provides a stage-friendly volume boost option for live applications.
From full-size to mini, these six pedals deliver funky “chickas,” screaming, fuzz-infused lead tones, and more.
The variations on a classic stompbox bring you tonal versatility and more!
Xotic XW-2 Wah Pedal
The Xotic XW-2 Wah Pedal is a high-quality, versatile stomp that creates a ’70s-style “throaty” wah sound.
xotic.us
Sonicake FlipWah
The FlipWah combo pedal combines a classic wah and active volume pedal in one, with a footswitch to select between the two modes. A Q knob adds even more versatility.
sonicake.com
$79 street
McCon-O-Wah McWah
The McWah-2B delivers classic tone with modern upgrades. Handwired, adjustable, and durable, it features a custom pot and true bypass for optimal sound. Inspired by the original, legendary wah pedal.
mcconowah.com
$428 street
Dunlop Jerry Cantrell Rainier Fog Cry Baby Wah
This Cry Baby signature model complements Jerry Cantrell’s sound with a dark, punchy voice, a wide sweep, and a control on the side for fine-tuning the toe-down frequency.
jimdunlop.com
Dunlop CBJ95 Cry Baby Junior Wah Pedal
The Cry Baby Junior Wah features front-mounted jacks and an 8" housing for clean configurations on the world’s most popular boards.
jimdunlop.com
Dunlop Cry Baby Daredevil Fuzz Wah Pedal
A collaboration with Daredevil Pedals, this Cry Baby Wah combines the bright, aggressive vocality of a modded Cry Baby Wah with a custom fuzz circuit that’s downright gnarly.
jimdunlop.com
Leveraging 3D printing technology, the new Floyd Rose Original locking nuts are designed to deliver unmatched precision and consistency, replacing the traditional “lost wax” casting method that dominated for decades.
The shift to 3D printing allows for intricate detailing and tighter tolerances, ensuring each nut meets exact specifications.
The process begins with powdered metal, which is precisely 3D printed into the desired shape using advanced metal printing technology. After printing, the parts are depowdered and cleaned before undergoing a sintering process—an advanced heat treatment—during which the parts achieve full density and hardness. Lastly, the nuts are CNC “kiss-cut” to exacting specifications for consistency and control of the fit before receiving a premium electroplating finish.
“Floyd Rose has always been synonymous with innovation, and by embracing this incredible new technology we are able to continue that legacy,” said Andrew Papiccio, president of AP International Music Supply of which Floyd Rose is a division. “The accuracy and flexibility of the new 3D printing method will allow us to make a more consistent piece while also giving us full control of the manufacturing right here in the USA.”
Initially, the 3D-printed locking nuts will be available in ten classic sizes with a 10” radius, with plans to expand the range to accommodate various fretboard radii in Spring 2025. This augmentation will offer players more options for customizing their setups to match a wide variety of fretboard curvatures.
To get a sneak peek at the new Floyd Rose USA Series, come visit us at NAMM in booth 5734 in Hall D.