The riffs, the fills, the tones. What's not to love?
Intermediate
Beginner
- Understand how to craft melodic licks in the style of Brent Mason, Pete Anderson, and others.
- Create flowing open-string licks.
- Learn how to combine blues with bluegrass.
Mainstream country music in the '90s was a guitar-lover's dream. Nearly every tune on the radio was full of tasty fills and ripping—but short—solos. The most prominent session player during this time was Brent Mason, whose car primer gray Tele became as iconic as the parts he crafted.
In this lesson, we will take inspiration from a few of the classic licks from the era and twist them around to make new ideas to add to your arsenal. We will cover double-stop licks, open-string lines, bending licks, and chromatic lines. Phrasing and timing is important and I will breakdown the key components to why they work and what chord to use them over. We will be using hybrid picking with all of examples.
Since we are working specifically in the '90s country vein, I picked four tunes with lots of guitar work and rather long solo sections.Vince Gill - Liza Jane
It's always great to learn exactly what the player did on the recording. Signature licks are what define the song and are important, especially if you're playing the tune live. But what happens if the tune is extended, or you are the only lead player that has to cover more territory and time? Some of these tunes have a long ending that vamp and fade out on the recording. What do you do then? You can always improvise a solo. These examples are a great launching pad for attacking those vamps.
Ex. 1 is a great way to kick off the beginning of the solo to "Liza Jane." It starts with an A7 arpeggio (A–C#–E–G) before chromatically approaching our comfortable blues box pattern. This lick ends in a very "Vince Gill" way with the unison bends and landing on a double-stop. Strive for the silky smoothness of Vince's phrasing.
Ex. 1
Ex. 2 covers the C and D chords in the solo section. Using bluegrass ideas over both chords gives you a cool open-position lick for the C chord. Make sure to bend down on the D# note. Over the D chord we do an oblique bend ending the phrase on the b7, a very hip Vince-ism.
Ex. 2
Alan Jackson - Chattahoochee (Official Music Video)
The intro to "Chattahoochee" is an all-time crowd pleaser, so make sure you get that under your fingers. Brent Mason's licks on this song are iconic and, in some ways, have become cliches—but in a good way. Ex. 3 is over the C chord and is a great way to work down the neck using double-stops.
Ex. 3
There's a very cool II-V progression on the back half that fits perfectly with Ex. 4. Notice how I keep all the notes ringing through the first measure before adding a "dead" note and an element of chicken pickin'. Don't forget to really pluck that Bb on the 3rd string before resolving to the G.
Ex. 4
Dwight Yoakam - Fast As You (Video)
Pete Anderson was another twang king that made waves in the '90s. During this time, he was the one behind nearly all the snappy riffs on Dwight Yoakam's albums. Ex. 5 has a B-Bender sound to it and should be given special attention. Notice how the second G on the 2nd string is only bent up a half-step. This is a simple and effective way to jam on the I chord in "Fast As You."
Ex. 5
Next up we use a few open strings for a bluesy lick (Ex. 6). I can totally hear a bit of SRV in this one. Plus, the cool rake at the end is a signature Pete Anderson move.
Ex. 6
Joe Diffie - Pickup Man (Official Music Video)
Ex. 7 uses a motif from the intro lick of Joe Diffie's "Pickup Man" and twists it around a bit. It's a nice way to reference the lick while using an open-string concept. Generally speaking, this riff uses G Mixolydian (G–A–B–C–D–E–F) along with a b3 (Bb). What a great way to combine blues with bluegrass.
Ex. 7
Naturally, we can move this open-string idea to a different part of the neck. In Ex. 8, I keep the same tonality, but move it up to 10th position. This frees me up to reach for this idea in another place on the neck, which is invaluable when improvising.
Ex. 8
The '90s provided us with so much great playing and ideas on how to approach country guitar. The high-energy playing combined so many great elements and techniques into unforgettable songs. My hope is that these examples will inspire you to dig deeper into the tunes and the players that define this style.
- John Scofield Connects the Dots - Premier Guitar ›
- Dive into the Deep Blues of the North Mississippi Hill Country ... ›
- Workin' Man Blues: Moving into the Country - Premier Guitar ›
- Tuning Up: Is Sustain Killing Cool Guitar? - Premier Guitar ›
- Country Music Star Caroline Jones Talks New Album Antipodes - Premier Guitar ›
- Shawn Tubbs Rig Rundown Guitar Gear Tour - Premier Guitar ›
- Rig Rundown: Vince Gill & Paul Franklin - Premier Guitar ›
An amp-in-the-box pedal designed to deliver tones reminiscent of 1950s Fender Tweed amps.
Designed as an all-in-one DI amp-in-a-box solution, the ZAMP eliminates the need to lug around a traditional amplifier. You’ll get the sounds of rock legends – everything from sweet cleans to exploding overdrive – for the same cost as a set of tubes.
The ZAMP’s versatility makes it an ideal tool for a variety of uses…
- As your main amp: Plug directly into a PA or DAW for full-bodied sound with Jensen speaker emulation.
- In front of your existing amp: Use it as an overdrive/distortion pedal to impart tweed grit and grind.
- Straight into your recording setup: Achieve studio-quality sound with ease—no need to mic an amp.
- 12dB clean boost: Enhance your tone with a powerful clean boost.
- Versatile instrument compatibility: Works beautifully with harmonica, violin, mandolin, keyboards, and even vocals.
- Tube preamp for recording: Use it as an insert or on your bus for added warmth.
- Clean DI box functionality: Can be used as a reliable direct input box for live or recording applications.
See the ZAMP demo video here: https://www.youtube.com/watch?v=xJp0jE6zzS8
Key ZAMP features include:
- True analog circuitry: Faithfully emulates two 12AX7 preamp tubes, one 12AX7 driver tube, and two 6V6 output tubes.
- Simple gain and output controls make it easy to dial in the perfect tone.
- At home, on stage, or in the studio, the ZAMP delivers cranked tube amp tones at any volume.
- No need to mic your cab: Just plug in and play into a PA or your DAW.
- Operates on a standard external 9-volt power supply or up to 40 hours with a single 9-volt battery.
The ZAMP pedal is available for a street price of $199 USD and can be purchased at zashabuti.com.
You may know the Gibson EB-6, but what you may not know is that its first iteration looked nothing like its latest.
When many guitarists first encounter Gibson’s EB-6, a rare, vintage 6-string bass, they assume it must be a response to the Fender Bass VI. And manyEB-6 basses sport an SG-style body shape, so they do look exceedingly modern. (It’s easy to imagine a stoner-rock or doom-metal band keeping one amid an arsenal of Dunables and EGCs.) But the earliest EB-6 basses didn’t look anything like SGs, and they arrived a full year before the more famous Fender.
The Gibson EB-6 was announced in 1959 and came into the world in 1960, not with a dual-horn body but with that of an elegant ES-335. They looked stately, with a thin, semi-hollow body, f-holes, and a sunburst finish. Our pick for this Vintage Vault column is one such first-year model, in about as original condition as you’re able to find today. “Why?” you may be asking. Well, read on....
When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye. The real competition were the Danelectro 6-string basses that seemed to have popped up out of nowhere and were suddenly being used on lots of hit records by the likes of Elvis, Patsy Cline, and other household names. Danos like the UB-2 (introduced in ’56), the Longhorn 4623 (’58), and the Shorthorn 3612 (’58) were the earliest attempts any company made at a 6-string bass in this style: not quite a standard electric bass, not quite a guitar, nor, for that matter, quite like a baritone guitar.
The only change this vintage EB-6 features is a replacement set of Kluson tuners.
Photo by Ken Lapworth
Gibson, Fender, and others during this era would in fact call these basses “baritone guitars,” to add to our confusion today. But these vintage “baritones” were all tuned one octave below a standard guitar, with scale lengths around 30", while most modern baritones are tuned B-to-B or A-to-A and have scale lengths between 26" and 30".)
At the time, those Danelectros were instrumental to what was called the “tic-tac” bass sound of Nashville records produced by Chet Atkins, or the “click-bass” tones made out west by producer Lee Hazlewood. Gibson wanted something for this market, and the EB-6 was born.
“When the EB-6 was introduced, the Bass VI was still a glimmer in Leo Fender’s eye.”
The 30.5" scale 1960 EB-6 has a single humbucking pickup, a volume knob, a tone knob, and a small, push-button “Tone Selector Switch” that engages a treble circuit for an instant tic-tac sound. (Without engaging that switch, you get a bass-heavy tone so deep that cowboy chords will sound like a muddy mess.)
The EB-6, for better or for worse, did not unseat the Danelectros, and a November 1959 price list from Gibson hints at why: The EB-6 retailed for $340, compared to Dano price tags that ranged from $85 to $150. Only a few dozen EB-6 basses were shipped in 1960, and only 67 total are known to have been built before Gibson changed the shape to the SG style in 1962.
Most players who come across an EB-6 today think it was a response to the Fender Bass VI, but the former actually beat the latter to the market by a full year.
Photo by Ken Lapworth
It’s sad that so few were built. Sure, it was a high-end model made to achieve the novelty tic-tac sound of cheaper instruments, but in its full-voiced glory, the EB-6 has a huge potential of tones. It would sound great in our contemporary guitar era where more players are exploring baritone ranges, and where so many people got back into the Bass VI after seeing the Beatles play one in the 2021 documentary, Get Back.
It’s sadder, still, how many original-era EB-6s have been parted out in the decades since. Remember earlier when I wrote that our Vintage Vaultpick was about as original as you could find? That’s because the model’s single humbucker is a PAF, its Kluson tuners are double-line, and its knobs are identical to those on Les Paul ’Bursts. So as people repaired broken ’Bursts, converted other LPs to ’Bursts, or otherwise sought to give other Gibsons a “Golden Era” sound and look ... they often stripped these forgotten EB-6 basses for parts.
This original EB-6 is up for sale now from Reverb seller Emerald City Guitars for a $16,950 asking price at the time of writing. The only thing that isn’t original about it is a replacement set of Kluson tuners, not because its originals were stolen but just to help preserve them. (They will be included in the case.)
With so few surviving 335-style EB-6 basses, Reverb doesn’t have a ton of sales data to compare prices to. Ten years ago, a lucky buyer found a nearly original 1960 EB-6 for about $7,000. But Emerald City’s $16,950 asking price is closer to more recent examples and asking prices.
Sources: Prices on Gibson Instruments, November 1, 1959, Tony Bacon’s “Danelectro’s UB-2 and the Early Days of 6-String Basses” Reverb News article, Gruhn’s Guide to Vintage Guitars, Tom Wheeler’s American Guitars: An Illustrated History, Reverb listings and Price Guide sales data.
An '80s-era cult favorite is back.
Originally released in the 1980s, the Victory has long been a cult favorite among guitarists for its distinctive double cutaway design and excellent upper-fret access. These new models feature flexible electronics, enhanced body contours, improved weight and balance, and an Explorer headstock shape.
A Cult Classic Made Modern
The new Victory features refined body contours, improved weight and balance, and an updated headstock shape based on the popular Gibson Explorer.
Effortless Playing
With a fast-playing SlimTaper neck profile and ebony fretboard with a compound radius, the Victory delivers low action without fret buzz everywhere on the fretboard.
Flexible Electronics
The two 80s Tribute humbucker pickups are wired to push/pull master volume and tone controls for coil splitting and inner/outer coil selection when the coils are split.
For more information, please visit gibson.com.
Gibson Victory Figured Top Electric Guitar - Iguana Burst
Victory Figured Top Iguana BurstThe SDE-3 fuses the vintage digital character of the legendary Roland SDE-3000 rackmount delay into a pedalboard-friendly stompbox with a host of modern features.
Released in 1983, the Roland SDE-3000 rackmount delay was a staple for pro players of the era and remains revered for its rich analog/digital hybrid sound and distinctive modulation. BOSS reimagined this retro classic in 2023 with the acclaimed SDE-3000D and SDE-3000EVH, two wide-format pedals with stereo sound, advanced features, and expanded connectivity. The SDE-3 brings the authentic SDE-3000 vibe to a streamlined BOSS compact, enhanced with innovative creative tools for every musical style. The SDE-3 delivers evocative delay sounds that drip with warmth and musicality. The efficient panel provides the primary controls of its vintage benchmark—including delay time, feedback, and independent rate and depth knobs for the modulation—plus additional knobs for expanded sonic potential.
A wide range of tones are available, from basic mono delays and ’80s-style mod/delay combos to moody textures for ambient, chill, and lo-fi music. Along with reproducing the SDE-3000's original mono sound, the SDE-3 includes a powerful Offset knob to create interesting tones with two simultaneous delays. With one simple control, the user can instantly add a second delay to the primary delay. This provides a wealth of mono and stereo colors not available with other delay pedals, including unique doubled sounds and timed dual delays with tap tempo control. The versatile SDE-3 provides output configurations to suit any stage or studio scenario.
Two stereo modes include discrete left/right delays and a panning option for ultra-wide sounds that move across the stereo field. Dry and effect-only signals can be sent to two amps for wet/dry setups, and the direct sound can be muted for studio mixing and parallel effect rigs. The SDE-3 offers numerous control options to enhance live and studio performances. Tap tempo mode is available with a press and hold of the pedal switch, while the TRS MIDI input can be used to sync the delay time with clock signals from DAWs, pedals, and drum machines. Optional external footswitches provide on-demand access to tap tempo and a hold function for on-the-fly looping. Alternately, an expression pedal can be used to control the Level, Feedback, and Time knobs for delay mix adjustment, wild pitch effects, and dramatic self-oscillation.
The new BOSS SDE-3 Dual Delay Pedal will be available for purchase at authorized U.S. BOSS retailers in October for $219.99. To learn more, visit www.boss.info.