Straight from the builder’s bench: Here are some tools that might just make your life a little easier.
Straight from the builder’s bench—these are the cool tools you need to keep your workflow moving along smoothly.
Guitar gear, by nature, regularly requires a bit of maintenance. So whether you’re a guitarist, builder, or both, having good tools makes it easier to stay on top of seasonal or technical changes. Any endeavor that requires mechanical or electrical maintenance is subject to what I call the 80/20 rule. This axiom refers to how we can spend 80 percent of our time fixing and 20 percent enjoying the fruits of our labor. You probably have a screwdriver or some wrenches, but there are a few neat little bits that make life on the workbench more pleasant and maybe shift the percentages of that rule.
Easy eyes.
Not everyone has perfect vision, and little things like guitar parts can be hard to see. Eyesight—which includes the brainpower to decipher what the eyes register—is one of the most energy-intensive things we do. Scientists say that vision uses somewhere between six and 20 percent of our brain’s resources. Even if you’ve got eyes like a hawk, it’s important to be kind to your system when manipulating tiny guitar parts like screws and strings. At the risk of sounding like your parents, I suggest you invest in some good lighting and a headband magnifier like the one Leo Fender wore. If you’re concerned about looking like a dork, remember that Leo invented the Stratocaster. I’ve got a few of these scattered about my shop at stations where vision is critical to the task, like adjusting intonation and bridges. They’re great for checking frets for high and low spots, too.
Tweeze please.
One of the most inexpensive and brilliant tools you can buy are good tweezers. Don’t bother with the junk from the health care aisle at Walmart. Go straight to McMaster-Carr’s website and get a couple differently shaped industrial-quality stainless steel ones. Once you get used to them, you’ll never turn back. And, of course, they also fit into your guitar case. I have a pair on almost every bench and desk in my shop—but then again, I’m a tool addict. The bent-tip tweezers are extremely useful for all small jobs including handling small screws. The ones with serrated gripping surfaces are great for threading strings through bridge and tuner holes. If you have champagne taste, go for the titanium solder-resistant pair for ultimate bragging rights.
After discovering these wonderful screws, everything else is Mickey Mouse—they’re great for repairing cabinets, cases, pedalboards, and more.
Shrink to fit.
I could be recommending old-school biker jeans from the ’60s, but this is about shrink tubing. I’ve been using this stuff for all kinds of jobs since before Jimi Hendrix played with Wilson Pickett—and I still haven’t run out of new uses. Basically, it’s rubberized tubing that shrinks 50 percent in diameter when heated. It’s made for insulating wire splices. You slip it over the splice and blast it with a heat gun (another great tool) until it shrink-wraps itself around the joint. But that’s not the only thing it can do. You’ve probably encountered high-dollar guitar cables with shrink tube reinforcing the ends. You can upgrade your everyday cables for pennies by adding those reinforcements yourself. I’ve also used it to protect parts from abrasion. The material is tough and can also be used to prevent scratching on certain parts. Buy an assortment of diameters so that you have the proper size for any job. You can also layer diameters to get a custom fit. There is even a shielded version, which is perfect for audio wiring. This miracle part is available at vendors from Amazon to Zoro, in sizes up to 2" diameter. If you want to get into the weeds with this stuff, McMaster-Carr is once again the rabbit hole of choice.
Don’t screw around.
We’ve all had our lives improved by drywall screws. Anything and everything you need to assemble quickly can be done with these little black wonders. Still, I’ve a new love, and its name is Spax. This German-designed, multi-purpose fastener is the Acropolis of quick-screws. The secret in each screw is three-fold: superior strength, multiple thread pitches (one for drilling, one for fastening), and a self-countersinking head. From hardwood furniture building to use with medium density fiberboard, these superior fasteners are self-drilling and reduce splitting when used without a pilot hole. After discovering these wonderful screws, everything else is Mickey Mouse—they’re great for repairing cabinets, cases, pedalboards, and more. Builders will love it for temporary tooling.
I hope a few of these items make your repair and build time more enjoyable. Nobody likes to have to fix stuff when they’d rather be banging out a tune. I still struggle with the 80/20 rule, but I have the tools to fight back. I’ve spent decades looking for the easier way around, and so should you.
- 12 Things Guitar Techs Need to Know - Premier Guitar ›
- Guitar Shop 101: The Guitarist's Essential Toolkit - Premier Guitar ›
- Why the Hell Is My Guitar Repair Taking So Long? - Premier Guitar ›
Reader: T. Moody
Hometown: Myrtle Beach, South Carolina
Guitar: The Green Snake
Reader T. Moody turned this Yamaha Pacifica body into a reptilian rocker.
With a few clicks on Reverb, a reptile-inspired shred machine was born.
With this guitar, I wanted to create a shadowbox-type vibe by adding something you could see inside. I have always loved the Yamaha Pacifica guitars because of the open pickup cavity and the light weight, so I purchased this body off Reverb (I think I am addicted to that website). I also wanted a color that was vivid and bold. The seller had already painted it neon yellow, so when I read in the description, “You can see this body from space,” I immediately clicked the Buy It Now button. I also purchased the neck and pickups off of Reverb.
I have always loved the reverse headstock, simply because nothing says 1987 (the best year in the history of the world) like a reverse headstock. The pickups are both Seymour Duncan—an SH-1N in the neck position and TB-4 in the bridge, both in a very cool lime green color. Right when these pickups got listed, the Buy It Now button once again lit up like the Fourth of July. I am a loyal disciple of Sperzel locking tuners and think Bob Sperzel was a pure genius, so I knew those were going on this project even before I started on it. I also knew that I wanted a Vega-Trem; those units are absolutely amazing.
When the body arrived, I thought it would be cool to do some kind of burst around the yellow so I went with a neon green. It turned out better than I imagined. Next up was the shaping and cutting of the pickguard. I had this crocodile-type, faux-leather material that I glued on the pickguard and then shaped to my liking. I wanted just a single volume control and no tone knob, because, like King Edward (Van Halen) once said, “Your volume is your tone.”
T. Moody
I then shaped and glued the faux-leather material in the cavity. The tuning knobs, volume knob, pickguard, screws, and selector switch were also painted in the lemon-lime paint scheme. I put everything together, installed the pickups, strung it up, set it up, plugged it in, and I was blown away. I think this is the best-playing and -sounding guitar I have ever tried.
The only thing missing was the center piece and strap. The latter was easy because DiMarzio makes their ClipLock in neon green. The center piece was more difficult because originally, I was thinking that some kind of gator-style decoration would be cool. In the end, I went with a green snake, because crocodiles ain’t too flexible—and they’re way too big to fit in a pickup cavity!
The Green Snake’s back is just as striking as the front.
Our columnist’s Greco 912, now out of his hands, but fondly remembered.
A flea-market find gave our Wizard of Odd years of squealing, garage-rock bliss in his university days.
Recently, I was touring college campuses with my daughter because she’s about to take the next step in her journey. Looking back, I’ve been writing this column for close to 10 years! When I started, my kids were both small, and now they’re all in high school, with my oldest about to move out. I’m pretty sure she’s going to choose the same university that I attended, which is really funny because she’s so much like me that the decision would be totally on point.
The campus looks way nicer than it did back in the ’90s, but there are similarities, like bars, shops, and record stores. Man, our visit took me back to when I was there, which was the last time I was active in bands. Many crash-and-burn groups came and went, and it was then that I started to collect cheap guitars, mainly because it was all I could afford at the time, and there were a lot of guitars to find.
In that era, I was using an old Harmony H420 amp (made by Valco), a Univox Super Fuzz, and whatever guitar I was digging at the time. I was so proud to pull out oddball guitars during shows and just have this totally trashy sound. Squealing and squeaking and noisy as heck, my style was reminiscent of Davie Allan, Ron Asheton, and Chuck Berry. Of course, I was way worse than all of them, but I did have a frenetic energy and I covered up my lack of skill with feedback. During the ’90s, there was a great punk revival, and I loved bands like the Mummies, Teengenerate, the Makers, the New Bomb Turks, and a bunch of others. Bands were embracing lo-fi, and I was planted firmly in that vein. Plus, the guitars I liked to use already sounded lo-fi.
“This was about the trashiest-sounding guitar, but in a good way!”
For a short spell I was using this Greco guitar and, man, this was about the trashiest-sounding guitar, but in a good way! See, Fujigen pickups (like the ones here) have this echoey voice that I describe as an “empty beer can” sound. My Super Fuzz would just destroy these pickups, and I wish I had some recordings from that era, because it was a real scene! I believe this Greco was a flea-market find but it was much later that I found out it was called a Greco Model 912. This was actually a copy of a German-made Framus guitar, but with a lot more glitz and a crazier headstock. Four pickup selector switches, volume/tone knobs, and a rhythm/lead switch rounded out the electronics. Again, these pickups are instant spaghetti-Western movie tone. Airy and bright, the bridge area is like instant, gnarly surf music. Tom Morello of Rage Against the Machine has a similar guitar and John Barrett of Bass Drum of Death was also fond of these pickups. Interestingly enough, these particular Grecos were made in small numbers, ranging between 500 to 600 in total (including all pickup combinations).
The Greco brand was initially owned by the U.S.-based Goya Corporation, but in the late 1960s, Fujigen bought the brand name (for $1,000) and produced a few truly gonzo guitars, including this Model 912. Originally called the GE-4, the four-pickup version sold for $99.50 in 1967. My particular 912 was sold at Sid Kleiner Guitar Studios in Califon, New Jersey (which I learned thanks to the attached store sticker on the headstock).
Aside from the chrome coolness and the four pickups, this model featured a cute little flip-up bridge mute that was all the rage at the time. The body also had some tasteful German carvings around the edges, and as I write this, I am missing this guitar tremendously! But not even close to the way I’m going to miss my girl in a few months. At least I know that she can shop at the same record stores!
Kevin Gordon and his beloved ES-125, in earlier days.
Looking for new fuel for your sound and songs? Nashville’s Kevin Gordon found both in exploring traditional blues tunings and their variations.
I first heard open guitar tunings while in college, from older players who’d become friends or mentors, and from various artists playing at the Delta Blues Festival in the early mid-’80s, which was held in a fallow field in Freedom Village, Mississippi—whose topographical limits likely did not extend beyond said field.
I remember Jessie Mae Hemphill wearing a full-length leopard-print coat and black cowboy hat in the September heat, walking through the crowd selling 45s, and James “Son” Thomas singing his bawdy version of “Catfish Blues.” Also, an assembly of older gentlemen passing a pint bottle, all wearing vests with the name of their fraternal society sewn on the back: Dead Peckers Club.
I played in master minimalist Bo Ramsey’s band from 1988 to ’90. Living in Iowa City, attending grad school for poetry, weekend gigs with Bo were another equally important kind of education. He was the first guy I played in a band with who used open tunings. Nothing exotic: open G or open E, early Muddy Waters and Elmore James. Music I had loved since growing up in Louisiana. This was our bond, the music we both considered bedrock. Some of my first songs, written for that band, featured Bo on slide guitar.
I moved to Nashville in 1992, a city already populated with a few friends—some from Iowa, some from Louisiana. Buddy Flett was from Shreveport; I’d loved his playing since seeing him in the band A-Train in the early ’80s. We’d go eat catfish at Wendell Smith’s, and inevitably talk about songs. He’d achieved some success as a writer, working with fellow north Louisianan David Egan, employing his own kind of sleight-of-hand mystery in both G and D tunings.
In 1993, I found a guitar that would change my life and my songwriting: a scrappy Gibson ES-125 from 1956, standing in a corner of a friend’s apartment in Nashville, covered in dust. I asked if I could borrow it, for no particular reason other than to get it out of there so that it would be played. I wrote a song on it, in double drop-D tuning [D–A–D–G–B–D]. Not a great song, but it got me thinking about open strings and tunings again. I was looking for a way to play solo shows that reflected where I came from, and where the songs came from that I was writing.“The droning aspect of open tunings always appealed to me, and in the context of solo gigs, the big sound of octaves ringing out helped this insecure guitar player sound a little taller, wider . . . something.”
So, I put the guitar in open D [D–A–D–F#–A–D], put flatwounds on it, and started figuring out chord shapes (other than barring flat across) that I could use to play my songs, all of which at that point had been written and performed in standard tuning. I’d bought a ’64 Fender Princeton amp years before, when I was 19, but had never found a use for it until now: The 125 through the Princeton on about four was the sound. The droning aspect of open tunings always appealed to me, and in the context of solo gigs, the big sound of octaves ringing out helped this insecure guitar player sound a little taller, wider . . . something. The fingerings I came up with all seemed to mask the third of the scale—so you’d have a big sound which was neither major nor minor. And for my songs, it just felt right. By the time I recorded my second album for Shanachie, Down to the Well, in 1999, I was writing songs in open D (“Pueblo Dog”). For the next two albums, released in 2005 and 2012, the majority of the songs were written and performed live in open D, employing a capo when necessary.
As usual, the methods and habits developed while touring fed back into the writing and recording processes. For my latest release, The In Between, though, most of the songs were written and recorded in standard—“Simple Things,” “Tammy Cecile,” “Coming Up”—with some exceptions, including “Keeping My Brother Down,” “You Can’t Hurt Me No More,” and the title track, on which I play a ’50s Gibson electric tenor archtop in a peculiar tuning: C–G–C–G. Though I can’t say that open tunings make for better songs, they do help me hear chords differently, at times suggesting progressions that I wouldn’t normally think of. One song currently in-progress has these verse changes: VIm / I / VIm / I / VIm / I / II / II. In standard tuning, that VI would sound (to my ear) too bright. But because I’m writing it in open D, how I fret the VI sounds low and dark, appropriate for the lyric and melody, creating the right setting for the lines and story to unfold.
Ethnomusicologist Frances Densmore records the song of Mountain Chief, head of the Blackfeet Tribe, on a phonograph for the Bureau of American Ethnology in 1916.
Once used as a way to preserve American indigenous culture, field recording isn’t just for seasoned pros. Here, our columnist breaks down a few methods for you to try it yourself.
The picture associated with this month’s Dojo is one of my all-time favorites. Taken in 1916, it marks the collision of two diverging cultural epochs. Mountain Chief, the head of the Piegan Blackfeet Tribe, sings into a phonograph powered solely by spring-loaded tension outside the Smithsonian. Across from him sits whom I consider the patron saint of American ethnomusicologists—the great Frances Densmore.
You can feel the scope and weight of theancient culture of the indigenous American West, and the presence of the then-ongoing women’s suffrage movement, which was three years from succeeding at getting the 19th Amendment passed by Congress. That would later happen on June 4, 1919—the initiative towards granting all women of this country the right to vote. (All American citizens, including Black women, were not granted suffrage until 1965.)
Densmore traversed the entire breadth of the country, hauling her gramophone wax cylinder recorders into remote tribal lands, capturing songs by the Seminole in southern Florida, the Yuma in California, the Chippewa in Wisconsin, Quinailet songs in Northern Washington, and, of course, Mountain Chief outside the Smithsonian in Washington, D.C. Author of more than 20 books and 200 articles, she carefully preserved the rich cultural diversity of Native Americans with over 2,500 field recordings.
Why am I writing about this? Firstly, to pay homage! Secondly, because it serves as a great reminder to seek and cultivate sound outside the studio as well. We live in a time of great technological power and convenience. Every week a new sample pack, plugin, pedal, or software instrument hits the market. For all the joy that these offerings bring, they deprive us of the joy of creating our own instruments from scratch.
This month, I’m advocating for you to make some field recordings of your own—nature, urban, indoor, outdoor, specific locations, animals, or anything that piques your interest! Bring the material back to the studio and make music with it! I’ll show you how to make your own sample libraries to use in your music. Tighten up your belts, a multipart Dojo is now open.
What do you need to get started? Quite simply, you just need any device that is capable of recording. This can range from your cell phone to a dedicated field recorder. The real question is: Do you want to use mics housed in handheld units or have more robust mic pres with the ability to power larger live/studio microphones using XLR connectors found with the larger units? Let’s look at three scenarios.
The Cellular Approach
The absolute easiest way to get started is with your cell phone. Take advantage of a voice-memo recording app, or use an app that records multitrack audio like GarageBand on iOS. Phone recordings tend to sound very compressed and slightly lo-fi—which might be exactly what you want. However, the method can also introduce unwanted noise artifacts like low-end rumble (from handling the phone) and phasing (moving the mic while recording). I recommend using a tripod to hold your phone still while recording. You might also want to consider using an external mic and some software to edit your sample recordings on the phone. I like using a Koala Sampler ($4.99) on iOS devices.
Upgrade Me
The next step up is to use a portable recorder. These have much better mic pres, and offer true stereo recording with pivoting mic heads. This can give you the added benefit of controlling the width of your stereo image when recording or helping isolate two sound sources that are apart from each other. You sacrifice the ability to easily edit your recordings. You simply import them into your computer and edit the recording(s) from there.
Pro-Level Quality
I would recommend this scenario if you want to record multiple sources at once. These devices also have SMPTE time code, 60+ dB of gain, phantom power (+48 volts), advanced routing, and a 32-bit/192 kHz sampling rate, so you’ll never have a distorted recording even when the meter gets unexpectedly pegged into the red from a loud sound source. I recommend the Zoom F8n Pro ($1099). Now you can use your microphones!
Best Practices
Try to safely record as close to the sound source as you can to minimize ambient noise and really scrub through your recordings to find little snippets and sound “nuggets” that can make great material for creating your own instrument and sample library—which we’ll explore next month! Namaste.
