The swift-riffing Swedes keep it simple with mended classics and a handful of saucy stomps.
The Hives are a ripping quintet that formed in Fagersta, Sweden, during the early ’90s. They exploded into American pop-culture consciousness during the garage-rock revival with a pair of chart-splashing, straight-forward stingers (2000’s Veni Vidi Vicious and 2004’s Tyrannosaurus Hives). And while they did take a hiatus in the mid-2010s, they’ve continued rocking the thin line between ragged and refined for nearly 30 years with a total of five albums, four EPs, and a 2020 live set recorded at Nashville’s Third Man Records.
Just after soundcheck wrapped at Nashville’s Brooklyn Bowl, the Hives’ redlining guitar duo of Nicholaus Arson and Vigilante Carlstroem welcomed PG’s Chris Kies onstage to talk gear. The resulting chat covered just how and why Carlstroem’s Flying V has split so many times (supposedly sounding better after each repair), and the reasons why Arson explains his vintage, bridge-pickup-only Fender Telecaster Custom is still the one. Both also quickly detail the torrid fuzzes that will never leave their respective boards.
[Brought to you by D’Addario XPND Pedalboard:https://www.daddario.com/XPNDRR]
Carlstroem’s Corroding Coronet
The band has several rigs situated across the globe with varying differences. However, for Vigilante Carlstroem this early 1959 Epiphone Coronet never leaves his side and tours everywhere. He’s had the stripped-down, rock-’n’-roll machine for 20 years, but when he first acquired the Epi it was “in fucking mint condition.” Prior to owning this one, he fell for its shape and vibe in the form of the similar (3-pickup) Epiphone Crestwood Deluxe. The stage staple has endured two different headstock fractures. Since getting his mitts on the axe, he’s played every Hives show with it. And he keeps everything decked out with Ernie Ball Paradigm Not Even Slinkys (.012–.056) and punishes the strings with Dunlop Tortex 1.14 mm picks.
Come Fly with V
When Carlstroem does need a neck pickup, he’ll put on this ’90s Gibson Flying V (with Lollar pickups) that’s been snapped in half and splintered several times. He swears that both this and the Coronet sound better after their rehabs.
V Marks the Spot
Here’s a glimpse of just some of the V’s battle scars.
Transatlantic Tones
Just like in our 2013 Rundown with the Hives, Carlstroem is still bringing the might with a one-two amp punch. He’s using a Divided by 13 JJN 50/100 that runs into an Orange PPC412 equipped with Celestion Vintage 30s (last time he was running Celestion Heritage Greenbacks in a different cab) and a Fender Vibro-King that pumps through three 25-watt alnico Jensen P10R-Fs. The amps’ controls and circuitry are shielded with foil because they and the Epiphone are sensitive to interference. (And an Orange Custom Shop 50 lurks in the background, as a backup for either amp.)
Old and New
When it comes to Carlstroem’s pedalboard, some things have changed while others have remained the same. Holdovers include a Mad Professor Deep Blue Delay (set to slapback setting), an Electro-Harmonix POG2 (used for an octave down or to imitate the saxophone on “Go Right Ahead” or organ on “My Time is Coming”), a custom Frantone Vigilantron tremolo, and a Voodoo Lab Pedal Power 2 Plus. Newcomers include a Skrydstrup R&D BF2M buffer (helping with the long cable runs) and a ZVEX Fuzz Factory Vertical. (To be fair, Carlstroem had an original Fuzz Factory—his favorite pedal—last time but has since opted for the compact version.)
T Time for Arson
Similar to Carlstroem, guitar mate Nicholaus Arson travels light when Stateside. Again, his No. 1 is a 1970s Fender Telecaster Custom that has just its overwound (stock) bridge pickup wired up. The vintage Tele once belonged to frontman Howlin’ Pelle Almqvist, who generously sold it to Arson. Both his Ts take Ernie Ball Paradigm 2020 Power Slinkys (.011–.048).
Crack My Back
Arson’s main axe has suffered several splits—none more impressive (or worrisome) than the re-glued fault line running from the cutaway to the body’s bottom.
T-Bird
His U.S. backup is this Sundberg The Arsonette that was designed by the guitarist. He aimed to make a crossbreed of a Telecaster and a Firebird by giving the single-cut a raised center block. (The neck still uses Fender-style, bolt-on construction.) The lone pickup is a Lace Sensor T-150 single-coil. The upper bout is chambered producing a deader, more-direct sound that Arson likens to a banjo or drum. He strives for a tone that is immediate and rhythmic, eschewing any sustain or lingering notes.
Eko-T
Up top, the hybrid 6-string has another cross-pollination feature: the traditional T-style headstock is elongated, similar to the old Italian Eko designs. The small text on the headstock reads: “Built by D Sundberg in favour of the hands of N Arson.”
Black-panel + Silver-panel = Fender Bliss
Keeping it all Fender, all the time, Arson plugs into both cherished time periods of Fullerton amp lore. Side A is a black-panel Bandmaster that hits a vintage Hiwatt cab outfitted with Celestion Heritage Greenback speakers. Side B is a silver-panel 1976 Fender Vibrolux. Notice Arson is plugging into the vibrato channels of both amps and each has its bright switch engaged.
Arson’s Antics
Three of Arson’s pedals are exactly as they were in 2013: a Crowther Audio Prunes & Custard fuzz for songs like “Tick Tick Boom,” a Boss DD-3 Digital Delay for short echo on “Take Back the Toys” and “Bigger Hole to Fill,” and a Boss AW-3 Dynamic Wah used for the intro to “Hate to Say I Told You So.” Last time he had an EHX Micro POG, but because the band was playing a fresh set of jams, he swapped it out for a TC Electronic Classic TC XII Phaser.
This convenient, easy-to-use controller can open up an entire world of sonic shape-shifting. Here are some tips to either inspire you to try one or expand how you’re currently using this flexible, creative device.
If you’re not yet using expression pedals, you should consider them. They have the power to expand and control your sonic universe. For the uninitiated, expression pedals are controllers that typically look like volume or wah pedals. Of course, traditional volume and wah pedals are expression pedals, too, but they are dedicated to controlling only those two effects.
Modern expression pedals allow you to assign and control parameters of your stomps or modelers by moving the expression pedal as you would a volume or wah. Dunlop, Boss, Ernie Ball, Yamaha, Behringer, Mission Engineering, and other manufacturers make these handy devices.
Many, but not all, of today’s stompboxes and modelers have expression pedal inputs that allow for manipulation of one or more parameters of those devices. In the past, this required bending over and turning a knob, or trying to turn a small knob with your foot—both of which can hamper your playing. The freedom of an expression pedal is the control you have over more aspects of your sound, especially in a live setting.
Although some of the uses for expression pedals below can also be accomplished by creating multiple presets, that will not allow real-time control over the parameters like an expression pedal will. Here are some notes about expression pedal use that might get you thinking about how one could help you.
Delay Repeats: Controlling the timing of a delay with tap tempo is very common, but how about controlling the number of repeats? With an expression pedal, by setting the expression control on your delay to control the number of repeats, you can easily go from a few for your rhythm sound to more for your lead sound, and then back off again.
Reverb and Delay Mix: The mix control on reverb and delay pedals allows you to balance the amount of wet to dry signal that you hear. There is often a delicate line to having just the right amount of wet signal with these two effects. If you have too much, your sound can be washed out and undefined. Too little and it can be dry and lack space. The part you are playing, and the venue you are in, can also change the amount of mix you need for these effects. By using an expression pedal for the mix control on reverb or delay, you can alter the sound on the fly to compensate for the part and the room, including turning down the mix for busy parts and up for parts with fewer notes.“Some uses for expression pedals can also be accomplished by creating multiple presets, but that will not allow real-time control over the parameters like an expression pedal will.”
Modulation Depth: The depth of a modulation effect, like a phaser, can drastically alter your guitar sound. A light amount can create a feeling of subtle movement, while a heavy amount can give a thick, underwater-type sound. An expression pedal can help you create a constant feeling of change throughout a song, allowing you to build up and break down the depth for different sections as you see fit.
Tremolo Speed: While the speed of tremolo can often be controlled by tap tempo, using an expression pedal for the same parameter offers other creative uses of the effect. With an expression pedal, you can easily speed the tremolo up to make subtle increases to the energy of a part or slow it down to decrease the energy. You can also create drastic changes in the speed that sound like a fan accelerating or slowing down. Or you can abruptly turn the tremolo off. This last option can be an exciting way to end a song or part.
EQ Change: Every guitar player uses EQ to sculpt their sound—whether via the tone controls on your instrument or amp (modelers included), or a dedicated equalizer used as part of your rig. Subtle tweaks can help you do things like balance out different guitars, cut through the mix more, or compensate for a boomy stage. Real-time control of EQ with an expression pedal is more common in the modeler world than the amp and pedal world, but it does exist in both. For example, increasing the midrange can give you more clarity and cut for solos. Decreasing it can create a flatter sound that can help you stay in the mix with the rest of the band. An expression pedal allows you to have one setting and alter it for multiple situations or guitars as opposed to having separate presets.
While this is a very short list of options for expression-pedal use, it should give you a good place to start. The most important thing is to always be creative, have fun, and find your own voice. An expression pedal can help you do all three.
Tailored for Yngwie Malmsteen's signature sound, the MXR Yngwie Malmsteen Overdrive is designd to offer simple controls for maximum impact.
Working closely alongside Yngwie, the MXR design team created a circuit that delivers clarity, expressive dynamics, and rich harmonics—all perfectly tailored for his light-speed arpeggios, expressive vibrato, and big, bold riffs. The control setup is simple, with just Level and Gain knobs.
"Want to sound like Yngwie? Crank both knobs to the max."
“This pedal is the culmination of 45+ years developing a sound that’s perfect in every possible way,” Yngwie says. “I present to you: the MXR Yngwie Malmsteen Overdrive. Prepare to be amazed.”
MXR Yngwie Malmsteen Overdrive highlights:
- Perfectly tailored for Yngwie Malmsteen's signature sound and style
- Simple control setup tuned for maximum impact
- Boost every nuance with superior clarity, expressive dynamics, and rich harmonics
- Dig into light-speed arpeggios, expressive vibrato, and big, bold riffs
The MXR Yngwie Malmsteen Overdrive is available now at $129.99 street/$185.70 MSRP from your favorite retailer.
For more information, please visit jimdunlop.com.
Voltage Cable Company's new Voltage Vintage Coil 30-foot guitar cable is now protected with ISO-COAT technology to provide unsurpassed reliability.
The new coiled cables are available in four eye-grabbing retro colors – Surf Green, Electric Blue, Orange and Caramel – as well as three standard colors: Black, White and Red. There is also a CME exclusive “Chicago Cream” color on the way.
Guitarists can choose between three different connector configurations: straight/straight plugs, right angle/straight and right angle/right angle options.
The Voltage Vintage Coil offers superior sound quality and durability thanks to ISO-COAT treatment, a patent-pending hermetic seal applied to solder terminations. This first-of-its-kind airtight seal prevents corrosion and oxidization, a known factor in cable failure and degradation. ISO-COAT protected cables are for guitarists who value genuine lifetime durability and consistent tone throughout their career on stage and in the studio.
Voltage cables are hand made by qualified technical engineers using the finest components available and come with a lifetime warranty.
Voltage Vintage Coil features include:
- Lifetime guarantee, 1000+ gig durability
- ISO-COAT treatment - corrosion & oxidization resistant cable internals
- Strengthened structural integrity of solder terminations
Voltage Vintage Coils carry $89.00 USD pricing each and are available online at voltagecableco.com, as well as in select guitar stores in North America, Australia, Thailand, UK, Belgium and China.
About Voltage Cable: Established in 2021, Voltage Cable Co. is a family owned and operated guitar cable company based in Sydney, Australia. All their cables are designed to be played, and built for a lifetime. The company’s ISO-COAT is a patent pending hermetic seal applied to solder terminations.
Featuring dual-engine processing, dynamic room modeling, and classic mic/speaker pairings, this pedal delivers complete album-ready tones for rock and metal players.
Built on powerful dual‑engine processing and world‑class UAD modeling, ANTI 1992 High Gain Amp gives guitarists the unmistakable sound of an original "block letter" Peavey 5150 amplifier* – the notorious 120‑watt tube amp monster that fueled more than three decades of modern metal music, from Thrash and Death Metal, to Grunge, Black Metal, and more.
"With UAFX Dream, Ruby, Woodrow, and Lion amp emulators, we recreated four of the most famous guitar amps ever made," says UA Sr. Product Manager Tore Mogensen. "Now with ANTI, we're giving rock and metal players an authentic emulation of this punishing high gain amp – with the exact mic/speaker pairings and boost/noise gate effects that were responsible for some of the most groundbreaking modern metal tones ever captured."
Key Features:
- A complete emulation of the early '90s 120‑watt tone monster that defined new genres of modern metal
- Powerful UAFX dual-engine delivers the most authentic emulation of the amp ever placed in a stompbox
- Complete album‑ready sounds with built‑in noise gate, TS‑style overdrive, and TC‑style preamp boost
- Groundbreaking Dynamic Room Modeling derived from UA's award-winning OX Amp Top Box
- Six classic mic/speaker pairings used on decades of iconic metal and hard rock records
- Professional presets designed by the guitarists of Tetrarch, Jeff Loomis, and The Black Dahlia Murder
- UAFX mobile app lets you access hidden amp tweaks and mods, choose overdrive/boost, tweak noise gate, recall and archive your presets, download artist presets, and more
- Timeless UA design and craftsmanship, built to last decades
For more information, please visit uaudio.com.